45W AC Triac Dimmable LED Driver 230V Constant Current | Euchips
- Vendor
- Euchips
- SKU
- 770022
- Availability
- In stock
- Weight
- 0.1 kg
£25.73inc VAT £21.44exc VAT
Product Description
The Euchips EUP45T-1WMC-0 is a constant current mode LED driver built for indoor lighting that needs smooth, flicker-free dimming. It runs from a 230V AC mains supply and works with both leading-edge (Triac) and trailing-edge (ELV) dimmers, so it drops into most existing dimming setups without extra gear.
Constant current led driver features
- Selectable output current, 500/700/900/1050mA, set via the built-in DIP switch.
- Dimmer compatibility, works with leading-edge (Triac) and trailing-edge (ELV) dimmers, including systems from Philips, Panasonic, Lutron, Simon, ABB and Siemens.
- Dimming range, 40VAC to 240VAC.
- Efficiency, up to 87%.
- Power factor correction, built-in active PFC.
- Housing, Class 2 power supply with a fully protective plastic enclosure.
- Protection, short circuit, overload and over-temperature protection.
Applications
Suited to indoor LED fittings that need reliable dimming, such as downlights, spotlights and panel lights. The DIP switch current selection means one driver can cover several fitting types on a job, cutting down the number of SKUs an installer needs to stock.
Dimming performance
Smooth, flicker-free operation across the stated dimming range makes it a straightforward swap where an existing Triac or ELV dimmer needs to control constant current LED loads.
Technical Specifications 29 rows Show
| Parameter | EUP45T-1HMC-0 |
|---|---|
| Output | |
| Output current | 800mA, 850mA, 900mA, 950mA |
| Output voltage | 9-45VDC |
| Output power | 36W, 38.25W, 40.5W, 42.75W |
| Output current | 1000mA, 1050mA, 1100mA, 1150mA |
| Output voltage | 9-45VDC, 9-43VDC, 3-41VDC, 3-39VDC |
| Output power | 45W, 45.15W, 45.1W, 44.85W |
| Current tolerance | ±5% |
| No load output voltage | 55VDC Max |
| Output ripple (<120 Hz) | <3% |
| Number of channels | 1 |
| Input | |
| Input voltage | 220-240VAC |
| Input frequency | 50/60Hz |
| Input current | 0.26A max @ 230VAC |
| Power factor | >0.9 @ 230VAC, full load |
| Total harmonic distortion | <20% @ 230VAC, full load |
| Efficiency | 85% @ 230VAC, full load |
| Inrush current | Cold start, 40A (twidth = 24us measured at 50% Ipeak) @ 230VAC |
| Protection | |
| Short circuit response | Closes output, recovers automatically after fault is removed |
| Overload response | Output current decreases when voltage is exceeded, recovers automatically when load is reduced |
| Over temperature response | Shuts down the output, recovers automatically when temperature returns to normal |
| Other specifications | |
| Dimming type | Triac/ELV |
| Dimensions (L*W*H) | 137*82*31 mm |
| Weight | 240g |
| Operating temperature | -20℃ to 50℃ |
| Relative humidity | 20%–90% RH |
Manufacturer datasheet. Figures as published by the manufacturer.
Datasheets & documents
More in AC Dimmable Power Supplies
60W Constant Current LED Dimmable Driver TRIAC/ELV£24.05inc VAT
£20.04exc VAT
20W TRIAC Dimmable LED Driver Constant Current£23.10inc VAT
£19.25exc VAT
40W LED Dimmable Driver Constant Current TRIAC/ELV£21.95inc VAT
£18.29exc VAT
LED Dimmable Driver 30W TRIAC Constant Current£27.46inc VAT
£22.88exc VAT
Boke LED Driver 18W Constant Current 350mA£16.43inc VAT
£13.69exc VAT
15W LED Dimmable Driver TRIAC Constant Current£18.08inc VAT
£15.07exc VAT
