44W LED Driver Constant Current Non-Dimmable | Philips Xitanium

The Philips Xitanium 44W LED driver is a constant current power supply built for professional lighting fixtures. It runs a fixed output current across a 30 to 42V DC range, with a maximum output voltage of 60V, and takes 220 to 240V AC mains input (operational range 202 to 254V) at 50 or 60Hz.

Key features of the Philips Xitanium 44W LED driver

• Output current, selectable via DIP switch between 0.9A, 0.95A, 1.0A and 1.05A
• Output voltage, 30 to 42V DC, maximum 60V
• Input, 220 to 240V AC, 50/60Hz, input current 0.24A
• Efficiency, up to 89%, power factor 0.9 or higher
• Ripple current, below 1%
• Dimming, non-dimmable

Housed in a compact IP20 enclosure measuring 108 x 68 x 32mm and weighing around 134g, this driver is rated for operation between -20°C and +50°C and has a stated lifetime of up to 50,000 hours. It is intended for indoor use only, in a well-ventilated location that allows heat to dissipate properly.

Applications

The driver suits LED downlights and spotlights, LED panels, and general commercial lighting in offices, retail units, public buildings and architectural installations. Its selectable current settings make it adaptable to a range of LED modules within professional luminaires.

Installation note

Fit this driver indoors only. Installation should be carried out by a qualified electrician, with attention paid to ventilation around the unit for correct heat dissipation.