40W LED Dimmable Driver Constant Current TRIAC/ELV | Euchips
- Vendor
- Euchips
- SKU
- 770008
- Availability
- In stock
- Weight
- 0.1 kg
£21.95inc VAT £18.29exc VAT
Product Description
The Euchips EUP45T-1HMC-0 is a 40W constant current LED driver built for TRIAC and ELV phase-cut dimming. It suits residential and commercial lighting where smooth, flicker-free control matters, and its output current can be set on site rather than fixed at the factory.
Key features
- Output current: adjustable from 300mA to 1400mA via DIP switch, with a current tolerance of ±5%.
- Output voltage: 3V to 65V DC.
- Input supply: 200 to 240V AC, 47 to 63Hz.
- Dimming: TRIAC and ELV, leading and trailing edge, 0 to 100% range, flicker-free.
- Power factor: ≥0.93, with active PFC.
- Efficiency: up to 80%.
Protection and build
- Short circuit, overload and over temperature protection, each recovering automatically once the fault clears.
- Class II construction in a fully enclosed housing.
- IP20 rated, for indoor use, with an operating range of -40°C to +60°C.
- Dimensions 171.5 x 54 x 20mm, weight approximately 225g.
Applications
Suits LED downlights, spotlights, panel and ceiling lights, and decorative or architectural fittings in residential and commercial installations.
Installation note
This driver is for indoor use only. Fit it in a well-ventilated position and have installation carried out by a qualified electrician.
Technical Specifications 29 rows Show
| Parameter | EUP45T-1HMC-0 |
|---|---|
| Output | |
| Output current (low setting) | 800mA, 850mA, 900mA, 950mA |
| Output voltage (low setting) | 9-45VDC |
| Output power (low setting) | 36W, 38.25W, 40.5W, 42.75W |
| Output current (high setting) | 1000mA, 1050mA, 1100mA, 1150mA |
| Output voltage (high setting) | 9-45VDC, 9-43VDC, 3-41VDC, 3-39VDC |
| Output power (high setting) | 45W, 45.15W, 45.1W, 44.85W |
| Current accuracy | ±5% |
| No load output voltage | 55VDC Max |
| Output LF current ripple (<120 Hz) | <3% |
| Channels | 1 |
| Input | |
| Input voltage | 220-240VAC |
| Input frequency | 50/60Hz |
| Input current | 0.26A max @ 230VAC |
| Power factor | >0.9 @ 230VAC, full load |
| THD | <20% @ 230VAC, full load |
| Efficiency | 85% @ 230VAC, full load |
| Inrush current | Cold start, 40A (t width = 24us measured at 50% I peak) @ 230VAC |
| Protection | |
| Short circuit protection | Closes output, recovers automatically after fault is removed |
| Overload protection | Output current decreases when voltage is exceeded, recovers automatically when load is reduced |
| Over temperature protection | Shuts down the output, recovers automatically when temperature returns to normal |
| Other specifications | |
| Dimming type | Triac/ELV |
| Dimensions | 137*82*31 mm (L*W*H) |
| Gross weight | 240g |
| Working temperature | -20℃ to 50℃ |
| Relative humidity | 20%–90% RH |
Manufacturer datasheet. Figures as published by the manufacturer.
More in AC Dimmable Power Supplies
60W Constant Current LED Dimmable Driver TRIAC/ELV£24.05inc VAT
£20.04exc VAT
20W TRIAC Dimmable LED Driver Constant Current£23.10inc VAT
£19.25exc VAT
LED Dimmable Driver 30W TRIAC Constant Current£27.46inc VAT
£22.88exc VAT
Boke LED Driver 18W Constant Current 350mA£16.43inc VAT
£13.69exc VAT
15W LED Dimmable Driver TRIAC Constant Current£18.08inc VAT
£15.07exc VAT
44W LED Driver Constant Current Non-Dimmable£13.13inc VAT
£10.94exc VAT
