All LED 2D Gear Trays
Round LED circuit board with yellow SMD chips arranged in concentric rings, mounting holes, and central connector, viewed fro

LED Gear Tray Replacement 18W for 28W 36W 2D Merrytek Sensor | Ledison

£40.90
Skip to product information
Round LED circuit board with yellow SMD chips arranged in concentric rings, mounting holes, and central connector, viewed fro

LED Gear Tray Replacement 18W for 28W 36W 2D Merrytek Sensor | Ledison

Vendor
Ledison
SKU
101032
Availability
In stock
Weight
0.313 kg

£40.90inc VAT £34.08exc VAT

Delivery from £4.99 to mainland UK 3 to 5 working days. Or collect free from Coventry.All delivery costs

Secure checkout
Payment methods
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • PayPal
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Product Description

This 18W LED gear tray replacement from Ledison carries a built-in Merrytek microwave sensor. It takes the place of a 28W or 36W 2D fluorescent lamp in a round ceiling or wall light, so the existing fitting stays on the wall. Output is 1800 lumens at 100lm/W.

LED gear tray replacement with microwave sensor

Movement is detected up to 12 metres away. Once the hold time runs out, the light drops to 10% in corridor mode, or you can set it to switch plainly on and off.

  • Power and output: 18W, 1800lm, 100lm/W
  • Colour temperature: 3000K, 4000K or 5000K
  • Sensor settings: adjustable detection range, switch-on time and switch-off delay
  • Photocell: built into the sensor box, can be turned on or off
  • Corridor function: 3-level dimming, down to 10%
  • Beam angle: 120 degrees

Installation details

The tray measures 262mm in diameter. Its driver is built in and mounted on a metal tray, with a fully insulated junction box. Wiring goes to a 3-way power block for switched live, neutral and earth.

Lifetime and warranty

Rated for 50,000 hours. Ledison covers it with a 5-year warranty.

Where to fit it

Corridors, stairwells and communal areas are the obvious places, since the sensor keeps the light low until someone walks through. Entrances and utility spaces suit it too. If you are upgrading a block of flats or a shared hallway full of older 2D bulkhead fittings, swapping the gear tray is a quicker job than replacing each light.

Technical Specifications 19 rows Show
Fitting2D / 4 pin
Luminous flux1800lm
Wattage (rated)18W
Colour rendering index>80
Voltage100-265V
Typical efficiency100lm/W
Line frequency50/60Hz
Beam angle120°
Average lifetime50,000 hours
Current250mA
Colour temperature3000K / 4000K / 5000K
Power factor0.95
Dimensions262mm diameter
SensorMerrytek microwave sensor
Detection rangeup to 12 metres
DimmableNo
Operating temperature-20°C to 45°C
CertificationTUV, RoHS Compliant, CE, UL
Warranty5 years

Manufacturer datasheet. Figures as published by the manufacturer.

More in LED 2D Gear Trays

View all 6 in LED 2D Gear Trays →