Euchips LED Driver 50W DMX512/RDM Dimmable Constant Current 500-1200mA
- Vendor
- Euchips
- SKU
- 770027
- Availability
- In stock
- Weight
- 0.15 kg
£30.44inc VAT £25.37exc VAT
Delivery from £4.99 to mainland UK 3 to 5 working days. Or collect free from Coventry.All delivery costs
Product Description
This Euchips LED driver supplies 50W of constant current and takes its dimming signal from a DMX512 or RDM controller. Output current is chosen on a DIP switch, so one driver can be matched to several different fittings. Dimming is smooth, with no flicker.
Euchips LED driver output settings
Four current levels are available. Each one has its own output voltage window:
- 500mA: 9-65VDC
- 700mA: 9-65VDC
- 1050mA: 9-48VDC
- 1200mA: 9-42VDC
From the factory it is set to 500mA, with every switch in the OFF position.
Key features
- Control: meets DMX512(1990) and supports RDM
- Channels: single channel output
- Mains input: 100VAC ~ 240VAC
- Efficiency: up to 88%
- Power factor: built-in active PFC
- Protection: overload and short circuit
Installation notes
The driver is not waterproof. Where it has to go outside, fit it inside a waterproof enclosure. It also needs a well-ventilated spot.
The housing measures 137*82*31mm and weighs 220g, which makes it straightforward to fit in a ceiling void or control cabinet alongside the rest of a DMX lighting installation.
Choosing the current
Check the rated current of the LED fitting before powering up. Set the DIP switch to match it, and confirm the fitting's forward voltage sits inside the window for that setting. Higher currents come with a narrower voltage range, so a fitting that works at 500mA may fall outside the limit at 1200mA.
Technical Specifications 23 rows Show
| Brand | Euchips |
| Model | EUP50M-1WMC-0 |
| Power | 50W |
| Output | Single channel output, output current level selectable by DIP S.W. |
| Output current | 500mA 700mA 1050mA 1200mA |
| Channels | 1 |
| Current accuracy | ±5% |
| No load output voltage | 90VDC |
| Output current ripple | <3% |
| Control | DMX512(1990), RDM |
| Input voltage | 100VAC ~ 240VAC |
| Frequency | 50/60Hz |
| Input current | 0.26Amax@230VAC |
| Power factor | ≥0.9@230VAC,full load |
| THD | <10% at full load |
| Inrush current | Cold start,15A @230VAC |
| Efficiency | up to 88% |
| Power factor correction | Built-in active PFC function |
| Protection | over load, short circuit |
| Dimensions | 137*82*31mmL*W*H |
| Gross weight | 220g |
| Working temperature | -20 ~ 50 |
| Relative humidity | 20~90% RH |
Manufacturer datasheet. Figures as published by the manufacturer.
Datasheets & documents
More in LED Drivers 1-10V
0-10V Dimmer Switch Touch Glass Panel 1 Zone AC100-240V£32.54inc VAT
£27.12exc VAT
1-10V Dimmer Switch Rotary On/Off Ivory White£26.20inc VAT
£21.83exc VAT
Euchips LED Driver 60W 1-10V Dimmable Constant Current 1050-1400mA£37.75inc VAT
£31.46exc VAT
Dimmable LED Driver 54W Constant Current 1-10V£39.85inc VAT
£33.21exc VAT
40W LED Driver 1-10V Dimmable 850-1200mA£30.44inc VAT
£25.37exc VAT
Euchips LED Driver 20W 1-10V Dimmable Constant Current£30.44inc VAT
£25.37exc VAT
