Victron 12V 60Ah Gel Deep Cycle Battery | BAT412550104

The Victron Energy 12V 60Ah Gel Deep Cycle Battery is a sealed, maintenance-free unit built for cyclic and standby use in solar, off-grid and marine systems. Its gel electrolyte construction suits installations where orientation or ventilation is limited. Capacity is rated at C20.

Key features

• Capacity, 60Ah rated at the C20 discharge rate.
• Gel electrolyte, no free liquid acid, reducing spillage and corrosion risk in confined or tilted installs.
• Sealed VRLA design, valve-regulated, no water topping required, minimal gas under normal operation.
• Deep cycle rated, built to withstand repeated discharge to low state-of-charge without early capacity loss.
• Nominal voltage, 12V, works with standard 12V charge controllers, inverters and monitors.
• Weight, 18kg.

Product overview

The gel electrolyte is immobilised rather than liquid, so the battery can be mounted in most orientations (except inverted) and copes better with vibration than flooded lead-acid types. That's useful where batteries sit in unventilated enclosures or vehicle-mounted boxes.

The C20 figure measures the 60Ah capacity over a 20-hour discharge. Higher currents over shorter periods reduce the usable capacity, which is normal for lead-acid chemistry, so size a system around C20 and derate for high-current loads. Victron's gel range pairs with Victron charge controllers and inverter-chargers that include gel-specific charge profiles.

As a VRLA battery it recombines charging gases internally under normal conditions, so it suits enclosed spaces, though ventilation is still advised as a precaution against overcharging.

Applications

• Solar off-grid 12V battery banks needing deep cycle performance.
• Marine and narrowboat house batteries where spillage resistance matters.
• Motorhome and campervan leisure battery systems.
• UPS and standby power in commercial or industrial settings.
• Remote monitoring stations and telecoms cabinets.

What's in the box

• 1 x Victron Energy 12V 60Ah Gel Deep Cycle Battery

Installation notes

Fit by a qualified electrician or experienced system integrator. Set the charge source to the correct gel profile: an AGM or flooded profile risks overcharging and can permanently damage gel cells. Install in a ventilated location away from heat sources and open flame, with terminals torqued correctly and protected against short circuit. Use an MCS-accredited installer for solar PV work where required by your DNO or insurer.