T8 LED Tube Light 120cm 20W 2400lm Replaces 36W Fluorescent | Ledison
- Vendor
- Ledison
- SKU
- 110813
- Availability
- In stock
- Weight
- 0.25 kg
£20.99inc VAT £17.49exc VAT
Delivery from £18.50 to mainland UK 3 to 5 working days. Or collect free from Coventry.All delivery costs
Product Description
This Ledison T8 LED tube light is 120cm (4ft) long and draws 20W, producing 2400 lm. It is made to replace a 36W fluorescent tube in an existing fitting. The power supply sits inside the tube, so no separate driver is needed. It comes in warm white (3000K), natural white (4000K) or cool white (>6000K).
T8 LED tube light features
- Output: 20W, 2400 lm, 120lm/W
- Replacement: directly replaces a 36W fluorescent tube
- Length: 1214mm pin to pin, 26mm diameter
- Light quality: colour rendering index >80, 120 degree beam angle, no flicker
- Cover: frosted for even light, with clear available on request
- Lifetime: up to 50,000 hours, backed by a 5-year warranty
Heat is drawn away from the LEDs through a circuit board with thermal vias and an anodised aluminium housing. The end caps rotate through 180 degrees. The tube is rated IP20 and is not dimmable.
Fitting the tube
Remove the old starter and fit the LED starter supplied in the pack. Fittings with an electronic ballast need it removed or bypassed, with the tube then connected directly to the mains. Power is only required at one end. If your fitting feeds both ends, it will need a quick rewire.
Installation instructions and a warranty certificate are included.
Where it is used
Offices, shops and supermarkets. Factories and warehouses. Schools, hospitals and homes, anywhere a 4ft fluorescent batten is already in place and a straight swap is wanted.
Certification
CE certificates cover the Low Voltage Directive (EN 62776:2015) and the EMC Directive 2014/30/EU. The tube is also listed as TUV, ROHS Compliant, CE and UL, with Hg 0.0mg mercury content.
Technical Specifications 22 rows Show
| Fitting | T8 LED tube |
| Luminous flux | 2400lm |
| Wattage (rated) | 20 Watt |
| Typical efficiency | 120lm/W |
| Colour rendering index | >80 |
| Beam angle | 120deg. |
| Average lifetime | 50,000 hours |
| Net weight per piece | 200gr |
| Diameter | 26mm |
| Length (pin to pin) | 1214mm |
| Colour temperature | Warm white: 3000K, Natural white: 4000K, Cool white: 6000K |
| Voltage | AC90-277V |
| Dimmable | NO |
| Certification | TUV, ROHS Compliant, CE, UL |
| Warranty | 5 years |
| Line frequency | 50/60Hz |
| IP rating | IP20 |
| Housing | Anodised aluminium housing |
| End caps | 180 degree rotatable end cap with scale |
| Switching cycles | 200,000 Switching cycle before failure |
| Mercury | Hg 0.0mg |
| Included | LED starter, installation instructions and warranty certificate |
Manufacturer datasheet. Figures as published by the manufacturer.
More in T8 LED Tubes
T8 LED Tube 120cm 10W/15W Switchable 3000lm 4000K£13.55inc VAT
£11.29exc VAT
Emergency Lighting Battery Pack 3 Hour LiFePO4£45.10inc VAT
£37.58exc VAT
150cm T8 LED Tube Light 5ft 22W 2640lm Replaces 56W Fluorescent£23.09inc VAT
£19.24exc VAT
6ft LED Tube T8 180cm 3500 Lumen Replaces 70W Fluorescent£29.39inc VAT
£24.49exc VAT
T8 LED Tube 150cm 5ft 30W 3600lm Replaces 56W Fluorescent£26.20inc VAT
£21.83exc VAT
90cm T8 LED Tube Light 12W 1440lm Replaces 30W Fluorescent£18.85inc VAT
£15.71exc VAT
