T8 LED Tube 120cm 10W/15W Switchable 3000lm 4000K | Ledison
- Vendor
- Ledison
- SKU
- 003248
- Availability
- In stock
£13.55inc VAT £11.29exc VAT
Delivery from £18.50 to mainland UK 3 to 5 working days. Or collect free from Coventry.All delivery costs
Product Description
This 120cm (4ft) T8 LED tube puts two power levels into one lamp. Set it to 15W and it gives 3,000 lm at 200 lm/W, enough to replace a 36W T8 fluorescent tube. Need less light? Move the switch on the end cap to 10W. The colour is natural white 4000K.
T8 LED tube key features
- Switchable power: 10W or 15W, selected on the end cap
- Light output: 3,000 lm at 15W
- Efficacy: 200 lm/W
- Light quality: 4000K natural white, CRI 85, 120° beam angle
- Rated life: over 50,000 hours, backed by a 5 year warranty
- Electrical: 100 to 240V AC, 50/60Hz, IP21, CE and RoHS marked
Where it works best
A fluorescent tube spreads light in every direction, and much of it is lost inside the fitting. Here the 120° beam points down onto desks, benches, aisles and parking bays. Run it at 15W for full brightness in warehouses, factories and workshops. Corridors and utility rooms usually need less, so 10W suits them. One stock item covers both jobs.
Long life matters on high ceilings and large sites. Every lamp change there costs labour and access equipment, and with over 50,000 hours of rated life those changes become rare.
Car parks are fine too, as long as the tube sits in a fitting with an IP rating suited to the location, because the tube itself is IP21. It operates in ambient temperatures from minus 20°C to 45°C and measures 1198mm long.
Fitting the tube
Magnetic ballast fittings
Remove the old fluorescent starter and fit the LED starter supplied. The tube then goes straight into the existing fitting.
Electronic ballast fittings
The ballast must be removed and the fitting rewired so mains voltage reaches one end of the tube only, the end marked AC INPUT. Never connect mains to the end marked Pins Shorted. Rewiring must be done by a qualified electrician.
Isolate the power before changing the 10W/15W setting or fitting the tube. Always follow the installation instructions supplied with it.
In the box
- 1 x T8 LED tube, 120cm (4ft), natural white 4000K
- 1 x LED starter
More in T8 LED Tubes
Emergency Lighting Battery Pack 3 Hour LiFePO4£45.10inc VAT
£37.58exc VAT
150cm T8 LED Tube Light 5ft 22W 2640lm Replaces 56W Fluorescent£23.09inc VAT
£19.24exc VAT
6ft LED Tube T8 180cm 3500 Lumen Replaces 70W Fluorescent£29.39inc VAT
£24.49exc VAT
T8 LED Tube 150cm 5ft 30W 3600lm Replaces 56W Fluorescent£26.20inc VAT
£21.83exc VAT
90cm T8 LED Tube Light 12W 1440lm Replaces 30W Fluorescent£18.85inc VAT
£15.71exc VAT
T8 LED Tube 60cm 2ft 10W 1200lm Replaces 18W Fluorescent£14.06inc VAT
£11.72exc VAT
