Victron MultiPlus Compact 24/2000/50-30 Inverter Charger 230V | CMP242200000

The Victron MultiPlus Compact 24/2000/50-30 combines an inverter and a battery charger in one unit, built for 24V battery systems. It delivers 2000VA of inverter output at 230V AC and charges at up to 50A, with a compact 14.3 kg build that suits installations where a full-size MultiPlus won't fit.

Key features

• Inverter output, 2000VA continuous, 230V AC sine wave, suitable for standard UK and EU loads.
• Charger, 50A multi-stage adaptive algorithm, compatible with lead-acid and lithium battery banks.
• AC transfer switch, 30A, switches to inverter mode on loss of AC input.
• PowerControl and PowerAssist, limits AC input current draw and draws on the battery when demand exceeds the input limit.
• VE.Bus port, allows monitoring via GX devices and parallel or three-phase configuration.
• Weight, 14.3 kg.

Product overview

The inverter side produces a true sine wave output, so it works with sensitive electronics and motor loads. The charger uses an adaptive four-stage algorithm, bulk, absorption, float and storage, adjusting to battery condition to reduce overcharging.

PowerAssist helps where the AC supply is limited, such as a small generator or a shore connection with a low current limit. Rather than tripping the supply when loads exceed the input, the unit draws the shortfall from the battery bank. That means a smaller generator can be used without shedding load. The 30A transfer switch hands over between external AC and inverter output quickly enough for most computers and sensitive equipment.

Applications

• Off-grid cabins, lodges and remote buildings with 24V battery banks.
• Marine vessels needing 230V AC from a 24V DC system.
• Vehicle conversions and motorhomes where space and weight matter.
• Backup power for critical loads in commercial or residential premises.
• Small off-grid solar systems needing charging and inversion from one unit.

Installation notes

Fit this by a qualified electrician familiar with DC battery systems and AC wiring regulations. The battery bank must be correctly rated with appropriately sized DC cabling and fusing. Any grid or generator connection should meet local wiring regulations and, where applicable, G98 or G99 requirements. VEConfigure software lets you set charge parameters, input current limits and system behaviour for the installation.

What's included

• Victron MultiPlus Compact 24/2000/50-30 230V VE.Bus inverter charger unit.