Victron MultiPlus Compact 12/2000/80-30 Inverter Charger 230V | CMP122200000

The Victron MultiPlus Compact 12/2000/80-30 combines a pure sine wave inverter and a battery charger in one compact housing, built for 12V battery systems. It supplies 2000VA of continuous inverter output at 230V AC, 50Hz, alongside an 80A charger for keeping the battery bank topped up. It is aimed at installers working on boats, vehicles and off-grid buildings where space and weight matter.

Key features of the Victron MultiPlus Compact 12/2000/80-30

• Inverter output, 2000VA continuous, 12V DC input, 230V AC output at 50Hz.
• Battery charger, 80A three-stage charger (bulk, absorption, float) with an adaptive charge algorithm.
• Transfer switch, 30A AC transfer switch, changing to inverter mode within 20 milliseconds of an AC input loss.
• PowerAssist, supplements a limited shore or generator supply so it is not overloaded.
• VE.Bus, communication interface for monitoring, configuration and parallel or three-phase setups with other Victron units.
• Weight, 14.3 kg, compatible with Victron GX devices and the VRM online portal.

System integration

VE.Bus configuration is handled through the Victron MK3-USB interface and VEConfigure software. Adding a GX device such as a Cerbo GX brings the unit into a wider system with full monitoring through VRM. Where an installation needs more capacity, multiple MultiPlus Compact units can be connected in parallel.

Applications

• Marine installations needing shore power charging and inverter backup from a 12V battery bank.
• Motorhomes and campervans requiring 230V AC output from a 12V leisure battery.
• Off-grid cabins and remote buildings running from 12V battery storage.
• UPS-style backup power for critical equipment, using the fast transfer switching.
• Vehicles and mobile units where a combined inverter charger saves installation space.

What's in the box

• 1 x Victron MultiPlus Compact 12/2000/80-30 230V VE.Bus inverter charger unit.

Installation notes

Fitting should be carried out by a qualified electrician or accredited installer familiar with 12V DC systems and 230V AC wiring. The unit needs a correctly rated 12V battery bank with suitable DC cabling and fusing. VE.Bus setup requires the MK3-USB interface and VEConfigure software. Grid or generator connected installations should meet UK wiring regulations and, where relevant, G98 or G99 requirements. Do not fit in an enclosed, unventilated space.