NLP/1 TP40 Remote LED Emergency Conversion Kit 3 Hour LiFePO4 | Liteplan
- Vendor
- Liteplan
- SKU
- 002664
- Availability
- In stock
- Weight
- 0.15 kg
£55.64inc VAT £46.37exc VAT
Delivery from £4.99 to mainland UK 3 to 5 working days. Or collect free from Coventry.All delivery costs
Product Description
The Liteplan NLP/1 TP40 turns a standard LED fitting into an emergency light with a 3 hour duration. It is built for remote mounting and comes with strain relief cables. The kit works with a wide range of LED types and circuits, including LED panels, T8 tubes and downlights, and it adjusts the LED current to suit the battery and the connected load.
Liteplan emergency lighting conversion kit features
- Emergency duration: 3 hours
- Battery: long life 3.2V 3.8Ah LiFePO4 pack
- Operating modes: maintained or non-maintained, with a green LED status indicator
- Protection: deep discharge protection and low power consumption
- Certification: module third party tested and certified by TÜV
- Ingress protection: IP20
Construction and power
A galvanised enclosure holds the inverter, the battery and a fused power connector block. The kit runs from a 230-240V AC 50/60Hz mains supply. Recharging takes 24 hours.
Installation
Mounting is remote, using the supplied strain relief module. The kit suits apertures of 40mm or greater, so it can be fed into a fitting through a fairly small opening. Wiring connects via push wire terminals.
Sizes
- Module: 231 x 33.6 x 22.5 (f/c 224mm)
- Battery: 94 x 34.5
Where it fits
Use it to add emergency backup to existing LED lighting such as panels, T8 tube fittings and downlights. With an IP20 rating, it belongs in dry indoor locations. Installers fitting out offices, corridors or commercial spaces can convert the fittings already specified rather than swapping them for dedicated emergency luminaires. Check that the LED load sits within the voltage range and LED count listed in the specifications before fitting.
Technical Specifications 23 rows Show
| Brand | Liteplan |
| Model | NLP/1 TP40 |
| Operation | Maintained or non-maintained |
| Emergency duration | 3 hours |
| LED voltage range | 6-55V |
| No. of LEDs | 2-20 (in series) |
| LED current limit | 320mA |
| Battery current limit | 900mA |
| Mains supply | 230-240V AC 50/60Hz |
| Charge current | 225mA Nominal |
| Recharge period | 24 hours |
| Battery pack | 3.2V 3.8Ah LiFePO4 |
| Battery discharge current | 900mA nominal |
| Max Ta and Tc | Ta - 50 C - Tc - 70 C |
| Max battery Tc | 55 C |
| Ingress protection | IP20 |
| Module size | 231 x 33.6 x 22.5, (f/c 224mm) |
| Battery dimensions | 94 x 34.5 |
| Module weight | 0.21Kg |
| Battery weight | 0.13Kg |
| Aperture | 40mm or greater |
| Terminal | Push wire 0.5mm - 1.5 mm |
| Enclosure | Galvanised enclosure |
Manufacturer datasheet. Figures as published by the manufacturer.
Datasheets & documents
More in LED Back-Lit Panels
1200x300 LED Panel 30W Backlit TP(a) Diffuser UGR<19 IP44From£35.69inc VAT
£29.74exc VAT
1200x600 LED Panel 50W Backlit TP(a) Diffuser UGR<19From£58.75inc VAT
£48.96exc VAT
600x600 LED Backlit Panel 30W TP(a) Diffuser UGR<19From£33.59inc VAT
£27.99exc VAT
