Victron Phoenix Inverter 12/1600 230V VE.Direct SCHUKO | PIN122161200

The Victron Inverter 12/1600 converts 12V DC battery power into 230V AC pure sine wave output, rated at 1600W continuous. It suits off-grid installations, vehicles, boats and backup power setups that need a reliable AC supply from a 12V battery bank. A SCHUKO output socket lets you plug in standard European and UK-compatible appliances without extra adapters.

Key features of the Victron 12/1600 inverter

• Output, 1600W continuous AC from a 12V DC input, pure sine wave.
• Monitoring, VE.Direct port for connection to Victron GX devices, MPPT Solar Chargers and the VictronConnect app via Bluetooth (optional dongle required).
• Socket, SCHUKO output for direct connection of standard 230V appliances.
• Protection, over-temperature, over-load, low battery voltage shutdown and short-circuit protection built in.
• Weight, 8.86 kg.
• Idle draw, low idle power consumption to limit battery drain at light loads.

Product overview

This inverter belongs to Victron's VE.Direct range, built for integration into Victron-based systems. The VE.Direct port lets it communicate with compatible Victron equipment, including Cerbo GX and Venus GX units, so installers can see inverter status and load data within a wider energy management setup. That matters in off-grid cabins, campervans and marine installations where monitoring is part of the job.

At 1600W continuous it handles moderate loads: lighting circuits, small power tools, laptops, televisions, refrigerators and similar equipment. Pure sine wave output means motors and compressors run without the compatibility problems that modified sine wave inverters can cause. Battery protection thresholds guard against deep discharge, which matters for battery life in off-grid and mobile setups.

SCHUKO is the standard socket format across continental Europe and is also common in the UK with the right adapter. Check the socket type suits your installation before commissioning.

Applications

• Off-grid cabins and remote buildings run from a 12V battery bank with solar charging.
• Campervan and motorhome conversions needing 230V AC from the leisure battery.
• Marine and narrowboat installations powering 230V appliances from a 12V DC system.
• Backup power for small offices or workshops during grid outages.
• Mobile work vehicles needing AC power for tools on site.

Installation notes

Fit this inverter with DC cable sized correctly between battery and unit, as high currents flow at full load and undersized cable causes voltage drop and heat. Fuse or breaker protection is needed on the DC supply as close to the battery as practicable. The inverter is not grid-tied and does not require G98 or G99 notification. Allow ventilation around the unit for thermal management, and use a compatible Victron GX device or VictronConnect Bluetooth dongle for VE.Direct connectivity.

What's in the box

• Victron Inverter 12/1600 230V VE.Direct SCHUKO unit