Victron Cable for Smart BMS CL 12-100 to MultiPlus | ASS070200100

This is the dedicated interface cable that connects a Victron Smart BMS CL 12-100 to a Victron MultiPlus inverter/charger. It carries the allow-to-charge signal between the two units so the MultiPlus operates within the limits set by the BMS. Without this cable, the two devices cannot communicate correctly.

Key features

• Purpose-built cable for the Smart BMS CL 12-100 to MultiPlus connection.
• Carries the correct signal communication between the BMS and the MultiPlus inverter/charger.
• Plug-and-play design with pre-fitted connectors matched to both units.
• Victron OEM part, manufactured to the same specification as the original supplied cable.
• SKU ASS070200100, GTIN 8719076051183.

Product overview

The Smart BMS CL 12-100 is Victron's battery management system for 12V lithium (LiFePO4) batteries. It controls load disconnection and sends charge permission signals to connected Victron equipment. The MultiPlus needs the correct allow-to-charge signal from the BMS to stay within the battery's limits, and this cable is what carries that signal.

An incorrect or improvised connection between the BMS and MultiPlus can mean the MultiPlus ignores BMS protection commands, risking overcharging or over-discharging of the lithium battery. This OEM cable gives the correct pinout and connector type for both ends, so that risk is removed.

Applications

• 12V lithium battery systems using the Smart BMS CL 12-100 with a MultiPlus inverter/charger.
• Replacement cable for existing Smart BMS CL 12-100 and MultiPlus installations.
• Marine, motorhome and off-grid systems where the Smart BMS CL 12-100 is the primary BMS.

What's in the box

• 1 x interface cable for Smart BMS CL 12-100 to MultiPlus connection.

Installation notes

Fit this cable as part of a complete Smart BMS CL 12-100 and MultiPlus system, following the wiring diagrams Victron provides for your configuration. Lithium battery systems with inverter/chargers should be installed by a qualified electrician or accredited installer familiar with Victron equipment and LiFePO4 battery requirements.