Victron 12/3000 230V Smart Inverter | Pure Sine Wave PIN122300000

The Victron Inverter 12/3000 230V Smart is a pure sine wave inverter for off-grid and mobile power setups. It converts 12V DC battery power into 230V AC at 3000VA continuous output, suitable for vehicles, boats, off-grid cabins and backup power systems. Bluetooth built into the unit links to the VictronConnect app for setup and monitoring without extra hardware.

Key features of the Victron 12/3000 Smart inverter

• Continuous output, 3000VA at 230V AC from a 12V DC battery bank
• Waveform, pure sine wave, suited to sensitive electronics and motor loads
• Connectivity, built-in Bluetooth for VictronConnect on iOS and Android
• Protection, overload and short-circuit protection with automatic shutdown and recovery
• Battery safety, low battery voltage alarm and shutdown
• Integration, VE.Direct port for connection to Victron system monitoring

Product overview

This model sits at the top of Victron's 12V inverter range. A 3000W load at 12V draws in excess of 250A from the battery, so cabling, fusing and battery capacity all need to be matched to that discharge rate to avoid excessive voltage drop.

The Smart designation refers to the integrated Bluetooth, allowing direct communication with VictronConnect. Installers can adjust low battery shutdown voltage, alarm thresholds and search mode without a separate interface cable, which helps during commissioning in confined vehicle or marine spaces.

The VE.Direct port lets the inverter connect into a wider Victron setup, including a Cerbo GX for central monitoring. It is a standalone inverter with no built-in charger; for combined inverter and charger functionality, look at the Victron MultiPlus range instead.

Applications

• Off-grid cabins and remote buildings needing 230V AC from a 12V battery bank
• Marine installations without shore power
• Large campervans, motorhomes and HGV sleeper cabs with high AC load needs
• Backup power for critical equipment during mains outages
• Mobile workshops and site vehicles running 230V tools from a battery source

What's in the box

• Victron Inverter 12/3000 230V Smart unit

Installation notes

Installation should be carried out by a qualified electrician or accredited installer. DC cable runs must be kept short and rated for sustained currents above 250A, with an appropriately rated DC fuse or breaker fitted close to the battery. The inverter is not grid-connected and does not require G98 or G99 notification, but AC output wiring must comply with BS 7671 regulations. Size the battery bank to support the expected load duration without triggering low-voltage shutdown.