LED 2D Lamp 12W 1050lm GR10q/GR8 4-Pin 28W CFL Replacement | Ledison
- Vendor
- Ledison
- SKU
- 101004
- Availability
- In stock
- Weight
- 0.15 kg
£19.90inc VAT £16.58exc VAT
Delivery from £4.99 to mainland UK 3 to 5 working days. Or collect free from Coventry.All delivery costs
Product Description
This 12W LED 2D lamp from Ledison goes into an existing round or square 4-pin fitting (GR8 or GR10q) in place of a fluorescent 2D lamp, and it replaces a 28W 2D CFL. The driver is built in. It runs straight from the mains at 65-265V AC, so no ballast or starter is needed, and it gives 1050lm.
LED 2D lamp key features
- Output: 12 watts, 1050lm
- LEDs: SMD2835 chips on a perforated circuit board that carries heat away
- Beam angle: 120 degrees
- Start-up: instant, with no flicker
- Switching: standard on/off, not dimmable
- Lifetime: 50,000 hours, with 80% lumen maintenance after 50,000 hours
Emergency lighting use
The tray carries an emergency socket and a charging indicator LED. These are there for use with the emergency conversion kit, which makes this lamp a fit for emergency lighting fittings.
Fitting and wiring
A qualified electrician must carry out the installation. Remove or bypass the existing ballast and starter before fitting, because connecting them will damage the lamp. Only live and neutral are needed, rerouted to the GR8 base.
Where it can go
Indoor, dry locations only. Fitted outdoors, it needs an IP65 or higher fitting around it.
Applications
Corridors and stairwells are typical. So are offices, schools, hospitals and residential communal areas, anywhere a stock of 4-pin 2D fittings is due a CFL to LED conversion without replacing the fittings themselves.
Technical Specifications 25 rows Show
| Product type | LED 2D Light Gear Tray |
| Fitting | 2D/4pin |
| Base type | GR8 / GR10q 4-Pin |
| Luminous flux | 1050lm |
| Wattage (rated) | 12 Watt |
| Colour rendering index | >80 |
| Typical efficiency | 85lm/W |
| Voltage | 65-265V AC, 50/60Hz |
| Line frequency | 50/60Hz |
| Beam angle | 120deg. |
| Average lifetime | 50,000 hours |
| Lumen maintenance | 80% After 50,000 Hours |
| Current | 80mA |
| Power factor | 0.95 |
| LED technology | SMD2835 LED Chips |
| Emergency function | Emergency Socket and LED Charging Indicator |
| Dimmable | NO |
| Use | indoor use, dry environment |
| Outdoor use | waterproof IP65 or higher fittings are required |
| Ballast and starter | DOES NOT require ballast or starter |
| Ambient humidity | 10-70% RH |
| Start-up | Instant Start |
| Operation | Standard On/Off |
| Operating temperature | -20 OC to 45 OC |
| Certification | TUV, ROHS Compliant, CE, UL |
Manufacturer datasheet. Figures as published by the manufacturer.
Datasheets & documents
More in LED 2D Lamps (GR10Q 4pin)
2D LED Lamp 16W GR10q 4-Pin 4000K 1510lm Replaces 36W CFL£17.84inc VAT
£14.87exc VAT
12W 2D LED Lamp 4-Pin Microwave Sensor Photocell 1050lm£30.44inc VAT
£25.37exc VAT
