Victron Inverter 24/1600 230V Smart Pure Sine Wave | PIN242161000

The Victron Inverter 24/1600 230V Smart converts a 24V DC battery bank into 230V AC pure sine wave power, with a continuous output of 1600VA. It's built for off-grid systems, vehicle conversions and backup power where a combined inverter/charger isn't needed. Bluetooth is built in, so the VictronConnect app handles setup and monitoring without extra hardware.

Key features

• Output, 1600VA continuous at 230V AC from a 24V DC input
• Waveform, pure sine wave, suitable for motors and sensitive electronics
• Connectivity, built-in Bluetooth via the VictronConnect app on iOS and Android
• Housing, aluminium enclosure weighing 12.4 kg
• Control, programmable relay for generator start, alarm or load-shedding
• Protection, overload, over-temperature and low battery voltage shutdown

System integration

The unit connects to a Victron GX device such as a Cerbo GX for full monitoring through the VRM online portal, and fits into the wider Victron GX ecosystem for larger off-grid or backup setups. As a standalone inverter it does not include a battery charger.

Applications

• Off-grid cabins and remote buildings needing 230V AC from a 24V bank
• Marine and narrowboat installations without constant shore power
• Vehicle conversions such as HGVs, campervans and expedition vehicles
• Backup power for critical loads during grid outages
• Telecoms and industrial enclosures on 24V DC battery backup

Installation notes

This inverter runs at voltages and currents that can cause injury or fire if wired incorrectly, so installation should be carried out by a qualified electrician familiar with DC battery systems and 230V AC wiring. DC cabling must be sized for the current draw at 24V under full load, and the battery bank needs a suitably rated fuse or breaker close to the terminals. It is not designed for grid connection and does not require G98 or G99 notification.

What's in the box

• Victron Inverter 24/1600 230V Smart unit