Victron Phoenix Inverter 12/1600 230V VE.Direct IEC | PIN122161100

The Victron Inverter 12/1600 is a pure sine wave inverter that converts 12V DC battery power into 230V AC, delivering up to 1600VA continuous output. It suits off-grid installations, vehicles, boats and backup power setups where a dependable AC supply needs to come from a 12V battery bank. A VE.Direct port lets it talk directly to compatible Victron monitoring equipment and displays.

Key features of the victron phoenix inverter 12/1600

• Output, 1600VA continuous AC output from a 12V DC input, via an IEC AC output socket.
• Waveform, pure sine wave output, suitable for sensitive electronics, motors and appliances that need clean AC power.
• Monitoring, VE.Direct communication port for integration with Victron equipment including the Color Control GX, Cerbo GX and compatible MPPT displays.
• Protection, built-in low battery voltage shutdown, over-temperature and overload protection, with automatic recovery where applicable.
• Weight, 8.82 kg.
• Identification, SKU PIN122161100, GTIN 8719076066330.

Product overview

The 12/1600 belongs to Victron's VE.Direct inverter range, built for standalone off-grid use rather than grid-tied or hybrid systems. Its 1600VA rating covers domestic and light commercial loads such as power tools, lighting circuits, small appliances and AV equipment. Because the output is pure sine wave, it drives inductive loads like motors and compressors without the waveform issues that come with modified sine wave inverters.

The VE.Direct interface matters for professional installs. It lets the inverter be monitored and controlled through Victron's GX ecosystem, giving installers and users visibility of output power, battery state and fault conditions from one interface. That's useful in off-grid cabins, mobile setups and backup systems where remote monitoring adds real value.

The IEC output format is standard for European and UK installations, accepting IEC C13 or C14 connected loads. Protection circuits handle common faults automatically, cutting down the need for manual intervention in unattended sites.

Applications

• Off-grid cabins and remote buildings run from a 12V battery bank with solar or wind charging.
• Marine installations needing 230V AC from a 12V domestic battery system.
• Motorhomes, campervans and commercial vehicles requiring mains-equivalent AC output on the road.
• Backup power systems where a 12V battery supplies AC during mains outages.
• Telecoms and light industrial enclosures needing monitored DC to AC conversion with VE.Direct integration.

What's included

• Victron Inverter 12/1600 230V VE.Direct IEC unit

Installation notes

This inverter runs at 12V DC and draws high DC currents at full load, so correct cable sizing and fusing on the DC side is essential to avoid voltage drop and fire risk. Installation should be carried out by a qualified electrician familiar with DC power systems. Any integration into a fixed electrical installation must comply with BS 7671 (IEE Wiring Regulations). The VE.Direct port is for monitoring and control only, it does not carry power. Keep the unit ventilated so the thermal protection can operate correctly.