Victron Blue Smart IP65 Charger 12/15(1) 230V CEE 7/16 | BPC121532034R

The Victron Blue Smart IP65 12/15 is a single-output 15A battery charger for 12V lead-acid and lithium batteries. Rated IP65, it is dust-tight and resists water jets, so it suits workshops, vans, boats and outdoor enclosures. Bluetooth is built in, letting it pair with a phone or tablet for monitoring and setup without extra hardware.

Key features of the Victron Blue Smart IP65 charger

• IP65 enclosure, dust-tight and protected against water jets for damp or outdoor use.
• 15A charge current, single output for 12V lead-acid (AGM, Gel, flooded) and lithium (LiFePO4) batteries.
• Built-in Bluetooth, connects to the VictronConnect app on iOS and Android for monitoring, history and settings.
• Seven-stage adaptive charging, optimises charge cycles to extend battery life.
• Storage mode, maintains correct voltage during long inactivity to prevent sulphation and over-discharge.
• Temperature-compensated charging, adjusts output voltage for ambient temperature.

Product overview

The Blue Smart IP65 range adds a weatherproof enclosure to Victron's standard Blue Smart chargers. That rating means the 12/15 can be mounted in a vehicle, a boat's engine bay, or a partially exposed outbuilding without a separate protective housing, and it delivers 15A to a single 12V battery, suiting medium to large banks in leisure vehicles, marine setups and off-grid backup systems.

The VictronConnect app shows charge stage, battery voltage, charge current and history, and lets you pick or customise battery presets. The seven-stage algorithm runs bulk, absorption, float and storage phases with an automatic recondition cycle for lead-acid batteries. It will not attempt to charge a battery discharged beyond recovery thresholds, and includes short-circuit and reverse polarity protection.

Applications

Suited to charging and maintaining 12V leisure batteries in campervans, motorhomes and caravans; marine charging in engine bays or wet lockers; off-grid cabin or outbuilding maintenance from mains or generator supply; workshop and fleet vehicle conditioning; and backup systems needing periodic charging with long-term storage management.

What's in the box

• Victron Blue Smart IP65 12/15 charger unit
• DC output cable with integrated connector
• Ring terminal DC connection cable
• CEE 7/16 (Europlug) mains cable
• Retail packaging

Installation notes

Connect to a standard 230V AC supply via the supplied CEE 7/16 plug, protected by an appropriately rated fuse or circuit breaker. Wire the DC output with correct polarity; the unit has reverse polarity protection, but incorrect wiring should still be avoided. Secure the unit to a fixed surface with the mounting points provided and allow adequate ventilation. When integrating with an inverter or solar charge controller, have a qualified electrician verify the overall system design.