Victron Blue Smart IP65 Charger 24/13(1) 230V CEE 7/17 | BPC241331064

The Victron Blue Smart IP65 24/13 is a single-output Bluetooth battery charger rated at 24V and 13A. Built for trade and marine use, it carries an IP65 rating that protects against dust and low-pressure water jets, and connects to 230V mains via a CEE 7/17 plug.

Key features

• Output, 24V at 13A, single DC output channel.
• IP65 enclosure, protected against dust ingress and low-pressure water jets.
• Bluetooth built-in, configure and monitor via the VictronConnect app on iOS or Android.
• Adaptive charging, multi-stage algorithm covering bulk, absorption and float phases.
• Battery compatibility, lead-acid (flooded, gel, AGM) and lithium (LiFePO4) with selectable profiles.
• Storage mode, reduces float voltage during long-term storage to limit degradation.

Product overview

The sealed, splash-proof housing suits engine bays, boat bilge areas, caravans and any location where moisture or debris is a realistic concern. It can stay connected without the ingress risk that affects a standard unrated charger.

VictronConnect removes the need for a separate display. Charge profiles are set and checked from a phone, useful when the charger sits somewhere hard to reach. The app also logs historical charge data for tracking battery health.

The adaptive algorithm watches battery response during absorption and adjusts accordingly. A battery in good condition moves to float sooner; an older or deeply discharged one gets a longer absorption cycle. Storage mode then lowers voltage further to slow self-discharge and reduce plate corrosion in lead-acid batteries.

Applications

• Charging 24V lead-acid or lithium battery banks in campervans, motorhomes and caravans.
• Marine battery maintenance on 24V systems exposed to damp or salt air.
• Workshop or fleet charging of 24V vehicle batteries where splash protection matters.
• Off-grid cabin or shed battery maintenance in dusty or condensation-prone spaces.
• Long-term storage charging for seasonal vehicles or equipment with 24V systems.

What's in the box

• Victron Blue Smart IP65 24/13 charger unit
• CEE 7/17 mains plug (230V AC input)
• DC output connector

Installation notes

Connect to 230V AC mains via the supplied CEE 7/17 plug, protected by an appropriate fuse or breaker. Wire the DC output to the battery with correct polarity, checking the battery manufacturer's charge voltage settings, especially when setting lithium profiles in VictronConnect. The IP65 rating covers dust and splashes, not submersion or continuous water flow. For permanent vehicle or marine fitting, use a qualified auto-electrician or marine electrician.