Victron Blue Smart IP65 Charger 24/8(1) 230V UK | BPC240831024R

The Victron Blue Smart IP65 24/8 is a single-output 24V 8A battery charger built for trade and off-grid use. It ships with a UK BS 1363 plug fitted, and its IP65 enclosure means it can be mounted where dust and damp are a concern without an extra housing.

Key features of the Victron Blue Smart charger

• IP65-rated enclosure, protected against dust ingress and low-pressure water jets.
• Bluetooth built-in, connects to the VictronConnect app on iOS and Android for monitoring, configuration and firmware updates.
• Adaptive 7-stage charging algorithm, covers bulk, absorption, float and storage stages automatically.
• Multiple battery chemistries, selectable profiles for lead-acid (AGM, gel, flooded) and lithium (LiFePO4) batteries.
• 24V 8A output, sized for 24V battery banks in vehicles, boats and smaller off-grid or backup systems.
• Temperature-compensated charging, adjusts voltage thresholds based on ambient temperature.
• Storage mode, reduces float voltage after 24 hours to protect batteries in long-term storage.

Product overview

The charger uses a fully programmable multi-stage algorithm, with the 8A output suited to 24V banks in the 40Ah to 200Ah range. Bluetooth via VictronConnect gives access to charge status, history and custom voltage thresholds from a phone or tablet, useful for both lead-acid installations and LiFePO4 systems needing tighter voltage control. A battery-safe reconditioning mode and automatic recovery from fault conditions reduce the need for manual intervention on unattended installations.

Applications

Suits 24V lead-acid or LiFePO4 battery banks in off-grid and backup power systems, vehicle and fleet maintenance charging for 24V trucks and vans, marine lockers or engine compartments needing IP65 protection, caravan and motorhome leisure battery maintenance, and long-term storage maintenance in workshops or plant rooms.

What's in the box

• Victron Blue Smart IP65 24/8 charger (1 output)
• UK BS 1363 mains plug (factory fitted)
• Battery connection leads

Installation notes

Connects to a standard UK 230V socket via the supplied BS 1363 plug, no hardwiring needed for typical setups. Make battery connections with the mains disconnected, and match battery voltage and chemistry to the selected charge profile. For LiFePO4 batteries, check the battery's BMS is compatible with the lithium profile. Allow ventilation around the unit, and consult a qualified electrician or MCS-accredited installer for integration into larger systems.