Victron Blue Smart IP67 Charger 12/13(1) 230V UK | BPC121347026

The Victron Blue Smart IP67 Charger 12/13 is a single-output 13A battery charger for 12V systems, supplied with a UK BS 1363 mains plug. It suits trade and professional use where a waterproof, Bluetooth-enabled charger is needed for vehicles, marine craft, plant equipment or off-grid battery maintenance.

Victron blue smart charger key features

• Enclosure, IP67 rated, dustproof and protected against temporary immersion up to 1 metre depth.
• Bluetooth, built in, monitored and configured via the free VictronConnect app on iOS and Android, no dongle required.
• Output, 13A for 12V lead-acid and lithium (LiFePO4) battery banks, with selectable charge algorithms.
• Charge algorithm, adaptive 7-stage covering bulk, absorption, float, storage, equalisation and recondition phases.
• Power input, single output, 230V AC input, supplied with a UK BS 1363 three-pin plug.
• Temperature compensation, adjusts charge voltage automatically for varying ambient conditions.

Compatible battery types include AGM, Gel, enhanced flooded (EFB), calcium and lithium iron phosphate.

Product overview

The IP67 rating suits installation in engine bays, bilges and outdoor enclosures where moisture, condensation or spray are a concern. It can be left permanently connected, as storage mode reduces voltage once the battery is full and maintains an optimal standby level.

Bluetooth is built directly into the unit. Through VictronConnect, an installer or end user can view charge status, adjust the algorithm, set battery capacity, and review historical data, removing the need for a separate display on single-battery installations. A battery safe mode is included for deeply discharged batteries that a standard charger would reject.

The 12/13 model delivers 13A into a 12V battery, appropriate for battery banks up to approximately 200Ah. For larger banks, Victron's higher-current IP67 models in the same range should be considered.

Applications

Used on marine and narrowboat batteries exposed to bilge moisture or spray, motorhome and vehicle leisure batteries during storage, plant and agricultural 12V starter or auxiliary batteries, off-grid cabins and outbuildings, and workshop or yard environments needing a permanent weatherproof charging point.

What's in the box

• Victron Blue Smart IP67 Charger 12/13 (1 output)
• UK BS 1363 mains plug (pre-fitted)

Installation notes

Connects directly to a standard UK 230V mains socket via the supplied BS 1363 plug. Check output leads are correctly connected to the battery terminals, observing polarity. The IP67 enclosure resists moisture and spray but should not be submerged continuously or fitted in permanently flooded locations. For lithium batteries, confirm the correct charge profile is selected in VictronConnect before use. No specialist certification is required for a plug-in installation, though any fixed wiring should be carried out by a qualified electrician.