Victron Blue Smart IP65 Charger 12/25(1) 230V UK | BPC122535024

The Victron Blue Smart IP65 12/25 is a single-output 25A battery charger for 12V lead-acid and lithium banks. The housing is IP65 rated, dust-tight and protected against water jets, so it can be mounted in a van, boat or outdoor enclosure without a separate weatherproof box. It fits a standard UK BS 1363 socket and is monitored over Bluetooth through the VictronConnect app.

Key features of this battery charger

• Output, 25A on a single 12V output.
• Enclosure, IP65 rated, dust-tight and protected against low-pressure water jets.
• Connectivity, built-in Bluetooth for setup, monitoring and history via VictronConnect on iOS or Android.
• Chemistry support, selectable profiles for AGM, gel, flooded lead-acid and lithium (LiFePO4).
• Charge algorithm, adaptive bulk, absorption and float stages, with a storage mode for long-term standby.
• Mains connection, fitted UK BS 1363 plug, no hardwiring needed.
• Weight, 2.2 kg.

Where it's used

This charger suits campervans, motorhomes and caravans needing to recover or maintain a 12V leisure or starter battery. The sealed housing means it can live in a workshop with dust around, or in a boat locker or engine bay where splash is a risk. It also works for keeping fleet vehicle batteries conditioned during storage, or topping up batteries in an off-grid cabin from a generator or mains feed.

Monitoring and setup

Rather than reading LEDs, VictronConnect shows charge voltage, current and stage directly on a phone, with fault history stored for diagnosis. Charge profiles are set to match the battery on site and the charger remembers them. Pairing an optional Victron temperature sensor adds temperature-compensated charging.

What's in the box

• Victron Blue Smart IP65 12/25 charger with integrated UK BS 1363 plug
• DC output cable with ring terminals
• Mounting hardware

Installation notes

The charger plugs straight into a UK 230V socket, so no hardwiring is required for portable use. DC cables should be rated for the 25A output and terminal connections checked for correct polarity. For a permanent installation in a vehicle or boat, use a qualified auto-electrician or marine electrician, and confirm the battery chemistry before selecting a charge profile.