Victron Blue Smart IP65 Charger 12/25(1) CEE 7/17 | BPC122535064

The Victron Blue Smart IP65 Charger 12/25 is a single-output 25A charger for 12V lead-acid and lithium battery systems. The IP65-rated enclosure suits workshops, vehicles and marine settings where dust or water spray are a factor, and it connects to the mains via a CEE 7/17 Schuko plug. Bluetooth built-in lets you set up and monitor charging from the VictronConnect app rather than a physical display.

Key features

• Charge current, 25A output for 12V battery banks, suitable for batteries from approximately 50Ah to 500Ah.
• Ingress protection, IP65 enclosure, protected against dust and low-pressure water jets.
• App control, Bluetooth connectivity with VictronConnect for iOS and Android, covering setup, monitoring and charge history.
• Battery compatibility, works with AGM, Gel, flooded and VRLA lead-acid types plus LiFePO4 lithium.
• Charge algorithm, seven-stage adaptive profile including conditioning and storage modes.
• Output, single DC output with an integrated connector for direct battery connection.

Applications

Fits leisure battery charging in campervans, motorhomes and caravans, workshop charging of automotive and commercial vehicle batteries, marine use where moisture resistance matters, and single-battery off-grid or cabin systems. It also suits battery maintenance on agricultural and plant equipment.

Mains connection

The CEE 7/17 plug is the two-pin Schuko-style plug used across continental Europe. UK installations need a plug adaptor rated for the charger's input current to fit a standard BS 1363 socket, and this should be planned for before installation.

What's in the box

• Blue Smart IP65 Charger 12/25 (1 output) unit
• CEE 7/17 Schuko mains plug, fitted
• DC output connector

Installation notes

Installation should be carried out by someone familiar with battery charging and low-voltage DC wiring. Confirm the connected battery's chemistry and capacity sit within the charger's supported range, and select the correct profile in VictronConnect, particularly for lithium batteries. Do not install where the unit could be submerged or hit by high-pressure water.