{"product_id":"victron-smartshunt-1000a-50mv-ip65-battery-monitor","title":"Victron SmartShunt 1000A\/50mV IP65 Battery Monitor | SHU065210050","description":"\u003cp\u003eThe Victron SmartShunt 1000A\/50mV IP65 is a standalone battery monitor with the monitoring electronics built into the shunt itself, so no separate display is needed. It tracks current, voltage, power, state of charge and time to go, and connects to the VictronConnect app over Bluetooth for setup and monitoring. The IP65 enclosure suits damp or dusty locations.\u003c\/p\u003e\u003ch2\u003eKey features of this smart shunt battery monitor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 1000A continuous, measured with a 50mV shunt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 rated, protected against dust and low-pressure water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, Bluetooth via VictronConnect (iOS and Android), plus a VE.Direct port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, state of charge, voltage, current, power and time remaining, all on one device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHistory logging\u003c\/strong\u003e, deepest discharge, average discharge, charge cycles and cumulative energy throughput.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, works with lithium, AGM, gel and flooded lead-acid chemistries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eConfiguration is done entirely through VictronConnect, where battery capacity, charge efficiency, Peukert exponent and charge floor are set to match the battery bank. Once set up, the SmartShunt runs on its own and keeps logging data regardless of whether a phone is connected.\u003c\/p\u003e\u003cp\u003eThe 1000A rating suits larger systems: high-capacity lithium banks, batteries wired in parallel, or setups with heavy DC loads from inverters, bow thrusters or electric drives. The VE.Direct port lets it feed data straight into a Victron Cerbo GX or other GX device for VRM monitoring.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar systems, marine installations such as narrowboats and yachts, motorhome and caravan leisure battery setups, commercial vehicle auxiliary power, and industrial or telecoms battery backup in partially exposed environments.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThe SmartShunt fits into the negative battery lead, between the battery negative terminal and every other negative connection in the system. Incorrect wiring gives inaccurate readings, and all charge sources (shore power, generator, solar controller) need to be wired through it for accurate current measurement. Installation in 12V, 24V or 48V DC systems should be carried out by a competent installer, and marine fitters should check relevant NMEA or RCD Directive requirements.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x Victron SmartShunt 1000A\/50mV IP65\u003c\/li\u003e\n\u003cli\u003eVE.Direct cable (check packaging for included accessories)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066625312,"sku":"SHU065210050","price":125.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu065210050-1.webp?v=1785510793","url":"https:\/\/www.ledandsolar.co.uk\/products\/victron-smartshunt-1000a-50mv-ip65-battery-monitor","provider":"LED \u0026 Solar","version":"1.0","type":"link"}