{"product_id":"victron-blue-smart-24v-13a-charger","title":"Victron Blue Smart IP65 Charger 24\/13(1) 230V UK | BPC241331024","description":"\u003cp\u003eThe Victron Blue Smart IP65 24\/13 is a single-output 13A battery charger for 24V systems, supplied with a UK BS 1363 plug fitted as standard. It suits vehicles, marine installations and off-grid battery banks where a sealed, weather-resistant charger is needed. The IP65 enclosure copes with damp or dusty conditions without any extra housing.\u003c\/p\u003e\u003ch2\u003eKey features of the Victron Blue Smart IP65 charger\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP65, protected against dust and low-pressure water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, built-in Bluetooth for setup and monitoring through the VictronConnect app on iOS and Android.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge algorithm\u003c\/strong\u003e, adaptive 7-stage process covering bulk, absorption, float, storage, equalisation and recondition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, GEL, AGM, flooded wet cell and lithium LiFePO4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains connection\u003c\/strong\u003e, UK BS 1363 three-pin plug, no rewiring or adaptor needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging\u003c\/strong\u003e, temperature-compensated, adjusting charge voltage to ambient conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCharge current is 13A on a 24V system, giving around 300W of charge power from the single output.\u003c\/p\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Blue Smart IP65 range uses a sealed, dust and splash-proof housing, which makes it practical in locations a standard charger would struggle with. This 24V 13A model fits larger 24V banks found in commercial vehicles, motorhomes, narrowboats and off-grid cabins. At 13A it will bring a 100Ah battery from flat to full in roughly 8 to 10 hours, depending on state and chemistry.\u003c\/p\u003e\u003cp\u003eBluetooth is built in as standard. Through VictronConnect, an installer or end user can select the right battery profile, watch charge status in real time and check historical charge data. On a simple single-battery setup this removes the need for a separate display. The app can also lock the charger to one profile, useful when handing a system over to someone non-technical.\u003c\/p\u003e\u003cp\u003eThe adaptive algorithm adjusts charge time and voltage to battery condition. A battery that's regularly deep-discharged gets a longer absorption phase; one kept in good condition moves to float sooner. Storage mode lowers float voltage further, cutting electrolyte loss during long idle periods.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e24V battery banks in motorhomes, campervans and caravans.\u003c\/li\u003e\n\u003cli\u003eMarine use on narrowboats and sailing vessels where moisture resistance matters.\u003c\/li\u003e\n\u003cli\u003eCommercial vehicle battery maintenance in workshops or fleet depots.\u003c\/li\u003e\n\u003cli\u003eOff-grid cabin or shed systems connected to a mains supply.\u003c\/li\u003e\n\u003cli\u003eBackup charging for 24V UPS or telecoms installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVictron Blue Smart IP65 24\/13 charger (1 output)\u003c\/li\u003e\n\u003cli\u003eUK BS 1363 mains plug (pre-fitted)\u003c\/li\u003e\n\u003cli\u003eBattery connection leads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eConnects directly to a standard UK 13A socket via the supplied plug. Check battery terminal polarity before connecting output leads: reverse polarity triggers the built-in protection, but repeated incorrect connection can damage the charger or battery. For permanent or semi-permanent fitting in a vehicle or vessel, secure the unit to a fixed surface using the mounting points provided and allow adequate ventilation. LiFePO4 profiles must be selected manually in VictronConnect before first use. On larger off-grid or marine systems, connection should be carried out by a qualified electrician or marine electrical engineer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095609372960,"sku":"BPC241331024","price":133.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bpc241331024-1.webp?v=1785755756","url":"https:\/\/www.ledandsolar.co.uk\/products\/victron-blue-smart-24v-13a-charger","provider":"LED \u0026 Solar","version":"1.0","type":"link"}