{"product_id":"victron-batteryprotect-65a-isolator","title":"Victron BatteryProtect 12\/24V 65A Battery Isolator | BPR000065400","description":"\u003cp\u003eThe Victron BatteryProtect 12\/24V-65A is an electronic battery isolator that disconnects a load from the battery once voltage drops to a damaging level. Built for 12V and 24V systems, it suits marine, off-grid and vehicle installations where over-discharge protection matters.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous current\u003c\/strong\u003e, rated at 65A, suitable for moderate to heavy DC loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual voltage\u003c\/strong\u003e, works on 12V or 24V systems without manual adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable thresholds\u003c\/strong\u003e, low-voltage disconnect and reconnect points are set via a rotary switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote on\/off input\u003c\/strong\u003e, allows integration with a BMS or external control signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow standby draw\u003c\/strong\u003e, self-consumption below 1mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-state switching\u003c\/strong\u003e, no mechanical relay contacts to wear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe unit monitors battery voltage continuously and disconnects the load circuit once voltage falls below the programmed threshold, which prevents deep discharge, the main cause of early battery failure in lead-acid and lithium systems. When the battery recovers to the reconnect voltage, the load is restored automatically after a short delay.\u003c\/p\u003e\u003cp\u003eThe rotary switch offers pre-set voltage profiles for common battery chemistries and system voltages. The remote input lets a BMS trigger a disconnect independently of the voltage threshold, making this a useful last line of defence in lithium installations where fast load shedding is needed. An alarm output can drive an LED or feed a monitoring system ahead of a full disconnect.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOver-discharge protection for lead-acid and lithium batteries in off-grid solar systems.\u003c\/li\u003e\n\u003cli\u003eLoad disconnect in marine and narrowboat 12V or 24V house battery banks.\u003c\/li\u003e\n\u003cli\u003eVehicle and motorhome auxiliary battery protection.\u003c\/li\u003e\n\u003cli\u003eBMS-controlled load shedding in lithium battery installations.\u003c\/li\u003e\n\u003cli\u003eCaravan and campervan DC load protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit the BatteryProtect in the load circuit only, never between the battery and a charger. It is not suitable for inverters or other inductive loads unless specified. Size the wiring for the 65A rating and protect it with a fuse at the battery. Installation by a qualified 12V or marine electrician is recommended, especially for lithium systems where correct BMS integration matters.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron BatteryProtect 12\/24V-65A unit\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060522348832,"sku":"BPR000065400","price":27.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bpr000065400-1.webp?v=1785492047","url":"https:\/\/www.ledandsolar.co.uk\/products\/victron-batteryprotect-65a-isolator","provider":"LED \u0026 Solar","version":"1.0","type":"link"}