{"product_id":"multiplus-ii-10kva-inverter-charger","title":"Victron MultiPlus-II 48\/10000\/140-100 Inverter Charger 230V | PMP483105000","description":"\u003cp\u003eThe Victron MultiPlus-II 48\/10000\/140-100 is a 10kVA combined inverter and charger for 48V battery banks, built for demanding off-grid, backup and hybrid solar installations. It delivers 230V AC output and pairs a pure sine wave inverter with a multi-stage charger and an automatic AC transfer switch in one unit.\u003c\/p\u003e\u003ch2\u003eKey features of this battery charger with inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e10,000VA (10kVA) continuous inverter output at 230V AC.\u003c\/li\u003e\n\u003cli\u003e140A battery charger for fast recharge from a generator or grid supply.\u003c\/li\u003e\n\u003cli\u003e100A AC transfer switch for automatic changeover between grid, generator and inverter output.\u003c\/li\u003e\n\u003cli\u003e48V DC input, compatible with lithium-ion (LiFePO4) and lead-acid battery banks.\u003c\/li\u003e\n\u003cli\u003ePowerControl and PowerAssist functions limit generator or grid load and draw extra power from the battery during peak demand.\u003c\/li\u003e\n\u003cli\u003eParallel and three-phase configurations supported, with up to six units combinable for higher power or three-phase output.\u003c\/li\u003e\n\u003cli\u003eVE.Bus communication port for Victron GX devices, Venus OS and the VRM portal.\u003c\/li\u003e\n\u003cli\u003eProgrammable relay and configurable charge algorithms through VEConfigure software.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis is one of the largest single-phase units in the MultiPlus-II range, combining an inverter, charger and transfer switch for installations that need to carry substantial continuous loads: commercial premises, large off-grid properties or critical backup systems.\u003c\/p\u003e\u003cp\u003ePowerAssist lets the unit supplement an undersized generator or a limited grid connection by drawing extra power from the battery bank when AC demand goes above the available supply, so a smaller generator can be used without load shedding. PowerControl does the opposite job: it caps the load drawn from the AC input to a set limit, protecting the source from overload.\u003c\/p\u003e\u003cp\u003eSeveral MultiPlus-II units can run in parallel for extra output, or in a split three-phase arrangement for three-phase loads. Configuration and monitoring go through VEConfigure and the Victron VRM ecosystem via a compatible GX device. The 140A charger restores a large battery bank quickly, useful where generator run time needs to stay low.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge off-grid residential or rural properties with high continuous power demand.\u003c\/li\u003e\n\u003cli\u003eCommercial and light industrial backup systems needing fast transfer and high charger current.\u003c\/li\u003e\n\u003cli\u003eHybrid solar installations with a 48V lithium or lead-acid battery bank and a solar charge controller.\u003c\/li\u003e\n\u003cli\u003eGenerator-backed systems where PowerAssist reduces fuel use and generator sizing.\u003c\/li\u003e\n\u003cli\u003eThree-phase or high-capacity parallel systems built from multiple units.\u003c\/li\u003e\n\u003cli\u003eTelecoms and other critical sites needing reliable 230V AC output from a battery bank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron MultiPlus-II 48\/10000\/140-100 230V inverter charger unit.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAt 48.6kg, this unit needs two people to handle and mount safely. Installation should be carried out by a qualified electrician familiar with battery systems.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053948793120,"sku":"PMP483105000","price":1279.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pmp483105000-1.webp?v=1785424186","url":"https:\/\/www.ledandsolar.co.uk\/products\/multiplus-ii-10kva-inverter-charger","provider":"LED \u0026 Solar","version":"1.0","type":"link"}