{"product_id":"argofet-100-2-battery-isolator","title":"Victron Argofet 100-2 FET Battery Isolator 100A | ARG100201020","description":"\u003cp\u003eThe Victron Argofet 100-2 is a FET-based battery isolator that charges two separate battery banks from a single alternator or charger, without the voltage drop that diode isolators introduce. It suits marine, vehicle and off-grid systems where independent battery banks need to stay isolated from each other during discharge while still being charged together.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery outputs\u003c\/strong\u003e, charges two independent banks from one input source with no cross-discharge between them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFET technology\u003c\/strong\u003e, removes the 0.6V to 0.7V drop typical of diode-based isolators, so batteries get the full charge voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 100A continuous across both output banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation\u003c\/strong\u003e, works automatically, with no manual switching needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.91 kg, small enough for confined installation spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with standard alternators and chargers, no alternator modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eCurrent flows freely from the input to both battery banks while charging, but reverse flow between the banks is blocked. If one bank runs flat, it cannot pull current from the other through the isolator. That makes it a good fit for setups with a starter battery and a separate leisure or service battery that must stay independent in use but share one charging source. No external control signal or relay is needed for normal operation, which keeps wiring simple.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMarine vessels with separate starter and service banks on one alternator.\u003c\/li\u003e\n\u003cli\u003eCampervans, motorhomes and HGVs needing split-charge without voltage loss.\u003c\/li\u003e\n\u003cli\u003eOff-grid systems feeding two isolated battery banks from a single charger.\u003c\/li\u003e\n\u003cli\u003eCommercial vehicles with auxiliary power needs separate from the starter battery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron Argofet 100-2 FET battery isolator\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit this with a qualified electrician familiar with high-current DC systems. Cabling should be rated for at least 100A continuous, with fusing on the input side close to the source. Mount in a ventilated spot, as the unit generates some heat under sustained load, and check it suits your alternator voltage and battery chemistry before wiring in.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095603769632,"sku":"ARG100201020","price":85.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-arg100201020-1.webp?v=1785755156","url":"https:\/\/www.ledandsolar.co.uk\/products\/argofet-100-2-battery-isolator","provider":"LED \u0026 Solar","version":"1.0","type":"link"}