{"product_id":"10kw-hybrid-inverter-48v-solis","title":"Solis S6-EH1P10K-L-PLUS 10kW Single Phase Hybrid Inverter 48V | 003076","description":"\u003cp\u003eThe \u003cstrong\u003eSolis S6-EH1P10K-L-PLUS\u003c\/strong\u003e is a 10kW single phase hybrid inverter from the Solis Solarator range, built for low voltage battery systems. It works with 40 to 60V lithium-ion or lead-acid batteries, making it a hybrid solar power inverter suited to larger homes and small businesses that want solar self-consumption, battery storage and backup power from a single wall-mounted unit.\u003c\/p\u003e\u003ch2\u003eKey features of this hybrid solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 10kW rated power, 10kVA maximum apparent power, single phase 220V \/ 230V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, 2 MPPTs with 4 string inputs, up to 21A per string, 16kW usable PV input against a 20kW recommended array.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 40 to 60V lithium-ion or lead-acid, up to 210A and 10kW charge and discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup power\u003c\/strong\u003e, 10kW output, 2 times rated power for 10 seconds, switchover in under 10ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerator support\u003c\/strong\u003e, 10kW rated generator input with voltage-free start and stop signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, IP66 enclosure, -25 to +60°C operating range, 7-inch LCD, Bluetooth and WiFi as standard, 96.2% maximum efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe inverter combines a solar charge controller, battery inverter and grid-tie inverter in one unit. Solar power feeds the loads first, then you choose between Self-use, Selling first or Off grid storage modes. Timed charge and discharge windows, a settable battery reserve and grid peak shaving give control over when and how the battery is used. A multi-function port can be configured as a generator input, a smart load output, or an AC-coupled input for an existing grid-tie PV inverter. Up to 6 units can run in parallel to expand capacity.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eResidential solar PV paired with 48V battery storage. Larger homes and small commercial sites that need 10kW of single phase output. Backup power for essential loads during outages, time-of-use tariff charging, off-grid or weak-grid sites with a generator, and retrofitting battery storage onto an existing grid-tie system by AC coupling.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x Solis S6-EH1P10K-L-PLUS 10kW hybrid inverter\u003c\/li\u003e\n\u003cli\u003e1 x Back plate (wall bracket)\u003c\/li\u003e\n\u003cli\u003e2 x Fastening screws\u003c\/li\u003e\n\u003cli\u003e4 x Expansion bolts\u003c\/li\u003e\n\u003cli\u003e4 x DC (PV) connectors\u003c\/li\u003e\n\u003cli\u003e1 x Parallel communication cable\u003c\/li\u003e\n\u003cli\u003e4 x RJ45 connectors\u003c\/li\u003e\n\u003cli\u003e1 x CT (current transformer)\u003c\/li\u003e\n\u003cli\u003e1 x WLan stick\u003c\/li\u003e\n\u003cli\u003e1 x Quick installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstall by a qualified electrician or MCS certified installer to BS 7671. In the UK a 10kW system normally needs a G99 application to the DNO. The manual recommends an 80A AC breaker, a Type A RCD of at least 100mA where required, a 300A DC breaker with 1\/0AWG battery cable, 4 to 6mm² PV cable and an earth conductor of 16mm² or larger. The supplied CT must be fitted at the grid connection point with its arrow pointing towards the grid, and the backup port must never be connected to the grid. The IP66 enclosure suits indoor or outdoor mounting, out of direct sun and rain, with clearance of 300mm above, 150mm each side and 800mm below. Only 40 to 60V batteries can be used; check the Solis battery compatibility list before fitting.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":68032799998240,"sku":"003076","price":1544.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-003076-1.webp?v=1793185285","url":"https:\/\/www.ledandsolar.co.uk\/en-eu\/products\/10kw-hybrid-inverter-48v-solis","provider":"LED \u0026 Solar","version":"1.0","type":"link"}