{"title":"Victron Solar Panels and Cables","description":"\u003cp\u003eVictron solar panels use monocrystalline cells designed to keep performing in low light and partial shade, which suits the UK's mostly diffuse daylight better than panels optimised for strong direct sun. Each panel carries a 25-year power warranty and an aluminium frame built to handle roof or ground mounting.\u003c\/p\u003e\u003cp\u003eAlongside the panels you'll find the MC4 cabling needed to wire them into a Victron MPPT charge controller: male\/female connector pairs, Y-splitters for combining or splitting strings, and UV-rated solar cable in various lengths with connectors already fitted. All of it is designed for outdoor use, so joints stay weatherproof once installed.\u003c\/p\u003e\u003cp\u003eThis range suits installers and self-builders putting together a complete Victron solar array, from the panel itself down to the last connector.\u003c\/p\u003e","products":[{"product_id":"mono-solar-panel-190w-victron","title":"Victron 190W Monocrystalline Solar Panel Series 4c | SPM041903903","description":"\u003cp\u003eThe Victron Energy 190W monocrystalline solar panel (SPM041903903) is a compact single-phase DC generation module built for off-grid, marine and mobile installations. Measuring 1485 x 668 x 30mm and weighing 10.5kg, it fits spaces where larger panels won't, while keeping the efficiency benefits of monocrystalline cells. It's part of Victron's Series 4c range and aimed at installers working on space- or weight-constrained systems.\u003c\/p\u003e\u003ch2\u003eVictron 190W solar panel key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e: 190W from 39 monocrystalline silicon cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact frame\u003c\/strong\u003e: 1485 x 668 x 30mm, smaller than standard 60-cell panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 10.5kg, easing structural load on roofs, vehicles and marine superstructures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame profile\u003c\/strong\u003e: slim 30mm aluminium frame for low-profile mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 4c, designed to integrate with Victron charge controllers and monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraceability\u003c\/strong\u003e: GTIN 8719076070672, genuine Victron Energy stock.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the 39-cell layout matters\u003c\/h2\u003e\u003cp\u003eMonocrystalline cells produce more power per square metre than polycrystalline equivalents, which counts for a lot on a panel this size. The 39-cell configuration is less common than the 60 or 72-cell layouts used on residential roof arrays, and it puts the panel's voltage closer to what 12V and 24V battery systems and 15A to 30A MPPT controllers expect. That makes it a practical fit for narrowboats, campervans, off-grid cabins and other small remote power setups, and it works with the full range of Victron BlueSolar and SmartSolar MPPT charge controllers. Paired with a Victron MPPT and a GX device, output can be monitored through the VRM portal.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid cabins and remote power systems running 12V or 24V battery banks.\u003c\/li\u003e\n\u003cli\u003eNarrowboat and canal boat solar charging.\u003c\/li\u003e\n\u003cli\u003eCampervan, motorhome and van conversion setups.\u003c\/li\u003e\n\u003cli\u003eMarine deck installations where weight and footprint are limited.\u003c\/li\u003e\n\u003cli\u003eSmall agricultural or rural monitoring stations needing autonomous power.\u003c\/li\u003e\n\u003cli\u003eSupplementary charging for caravan and touring leisure batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 190W monocrystalline solar panel, Series 4c\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit this panel with a qualified electrician or MCS-accredited installer. Check the panel's voltage and current figures against your charge controller before wiring it in, and confirm the mounting surface can carry the panel's weight along with wind and vibration loads. It isn't intended for grid-tied export without the right inverter and G98\/G99 compliance equipment. Use MC4 connectors and outdoor-rated DC cabling, installed to BS 7671 wiring regulations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060751626528,"sku":"SPM041903903","price":88.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-spm041903903-1.webp?v=1785503320"},{"product_id":"solarsense-750-pv-monitor","title":"Victron SolarSense 750 Wireless PV Monitor IP65 | SLS300175100","description":"\u003cp\u003eThe Victron SolarSense 750 is a self-powered wireless monitor that measures solar irradiance, estimated available PV power and panel temperature in real time. It links to the VictronConnect app, the VRM portal and Node-RED, so the data can be read manually or fed into automated load control.\u003c\/p\u003e\u003cp\u003eIn off-grid and grid-limited systems, an MPPT or inverter only tells you what the array is currently producing. The SolarSense 750 tells you what it could produce, which is a more useful figure when deciding whether to switch on an extra load.\u003c\/p\u003e\u003ch2\u003eKey features of the solar panel monitor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, self-powered with an integrated solar cell, no external wiring required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, Bluetooth Low Energy (BLE) Instant Readout to VictronConnect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurements\u003c\/strong\u003e, solar irradiance, estimated available PV power and panel temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration\u003c\/strong\u003e, works with VRM for remote monitoring and Node-RED for automated load switching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, fits directly to the PV array frame\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid systems with battery storage and hybrid or grid-limited installations where excess PV energy would otherwise go unused once the battery is full. Knowing the available power lets a water heater, pump or other opportunity load switch on at the right moment rather than drawing from grid or generator later.\u003c\/p\u003e\u003ch3\u003eCommissioning and diagnostics\u003c\/h3\u003e\u003cp\u003eComparing measured irradiance against actual MPPT output makes shading problems, panel degradation or incorrect orientation easier to identify without extra test equipment.\u003c\/p\u003e\u003ch3\u003eBluetooth range note\u003c\/h3\u003e\u003cp\u003eMetal panel frames and roofing materials can reduce BLE range, so position the unit with this in mind during installation.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x Victron SolarSense 750 monitor unit (SLS300175100)\u003c\/li\u003e\n\u003cli\u003eMounting hardware for PV frame installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eMount on or near the PV array in a position representing the panels' solar exposure. No external power connection is needed. Configuration is done via the VictronConnect app over Bluetooth. Professional installation is recommended for solar PV systems.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061010329888,"sku":"SLS300175100","price":62.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sls300175100-1.webp?v=1785508488"},{"product_id":"mc4-solar-connector-pair-victron","title":"Victron MC4 Solar Connector Pair Male\/Female | SCA520300000","description":"\u003cp\u003eA matched pair of MC4 solar connectors from Victron Energy, one male and one female, for joining PV cables in solar panel strings and array wiring. MC4 is the standard connector format used across most solar panels and PV cabling systems, giving a weatherproof DC connection for roof-mounted and ground-mounted arrays.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair supplied\u003c\/strong\u003e, one male and one female MC4 connector for crimping and assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type\u003c\/strong\u003e, MC4, the industry-standard format for solar PV strings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproof\u003c\/strong\u003e, suitable for outdoor use on roof and ground-mounted PV arrays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible\u003c\/strong\u003e, works with standard solar PV cable used in residential and commercial installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e, Victron Energy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed to terminate solar PV cable on rooftop installations, extend or join panel string cables on ground-mounted arrays, build custom-length DC cable assemblies for off-grid and hybrid systems, or replace damaged connectors on an existing array. The locking mechanism prevents accidental disconnection once mated, which matters on live DC circuits. They also suit MC4 input connections on Victron MPPT charge controllers and similar PV equipment.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eAssembly requires a proper MC4 crimping tool; a generic tool will not give the correct crimp dimensions, and a poorly crimped connector is a common cause of resistance heating and long-term failure. UK grid-connected PV wiring must comply with BS 7671 and relevant G98\/G99 requirements, and installation should be carried out by a qualified electrician or MCS-accredited installer. Never disconnect MC4 connectors under load: isolate the circuit first.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x MC4 male connector\u003c\/li\u003e\n\u003cli\u003e1x MC4 female connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061014327584,"sku":"SCA520300000","price":6.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca520300000-1.webp?v=1785509154"},{"product_id":"mc4-mc3-solar-adapter-cable","title":"Victron MC4\/M to MC3\/F Solar Adapter Cable 15cm | SCA500100000","description":"\u003cp\u003eThis Victron adapter cable lets an MC4 male connector plug into MC3 female equipment, so panels or extension leads terminated in MC4 can join older MC3-based charge controllers and combiner boxes without rewiring. At 15cm long, it stays neat inside a junction box or panel array.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector A\u003c\/strong\u003e, MC4 male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector B\u003c\/strong\u003e, MC3 female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length\u003c\/strong\u003e, 15cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.035kg (35g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e, SCA500100000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eMC4 is the current standard for solar panel wiring; MC3 was common on earlier installations and legacy charge controllers. Where the two meet, a direct connection is not possible without an adapter like this one. The male MC4 end accepts the female MC4 connector found on most modern panels and extension cables, while the female MC3 end plugs into the male MC3 output of older gear. The orientation is fixed, so check connector genders on your own equipment before ordering.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnecting MC4-terminated solar panels to legacy MC3-compatible charge controllers\u003c\/li\u003e\n\u003cli\u003eAdapting modern solar extension cables to older MC3 combiner boxes or junction points\u003c\/li\u003e\n\u003cli\u003eRetrofit installations where MC3 equipment is retained alongside newer MC4 components\u003c\/li\u003e\n\u003cli\u003eOff-grid systems still running older charge controllers with MC3 inputs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eCheck connector gender and type on both the panel side and the equipment side before fitting. MC4 and MC3 connectors are not interchangeable without an adapter, and mismatched pairing can cause poor contact or damage. Solar DC wiring carries live voltage whenever panels are exposed to light, so this work should be carried out by a qualified electrician or accredited installer. On grid-connected systems, check compliance with G98 or G99 requirements as applicable.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Solar adapter cable, MC4 male to MC3 female, 15cm\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061064888608,"sku":"SCA500100000","price":6.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca500100000-1.webp?v=1785510481"},{"product_id":"victron-mc4-solar-panel-cable","title":"Victron Solar Cable 3m 6mm² MC4 M\/F Connectors PV-ST01 | SCA000300100","description":"\u003cp\u003eA pre-assembled solar panel cable from Victron Energy, 3 metres long with a 6mm² conductor, fitted with MC4-compatible male and female connectors (PV-ST01 type). It is built for connecting solar panels together or extending a panel lead in residential, commercial and off-grid PV installations where a weatherproof cable assembly is needed.\u003c\/p\u003e\u003ch2\u003eKey features of this solar panel plug cable\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 3 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor\u003c\/strong\u003e, 6mm² cross-section, suited to standard string and parallel panel wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, one MC4-compatible male and one MC4-compatible female (PV-ST01), pre-fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheathing\u003c\/strong\u003e, UV-resistant and weatherproof, rated for outdoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e, supplied by Victron Energy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse this cable to extend a panel lead to reach a combiner box or charge controller input, to make panel-to-panel connections in a string or parallel array, or as a short inter-row link between adjacent panels. It suits off-grid systems built around Victron MPPT charge controllers as well as third-party equipment fitted with MC4 inputs. For longer distances, several assemblies can be chained together, or a custom-length cable used instead.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSolar PV wiring should be carried out by a qualified electrician or MCS-accredited installer. Check that the cable and connectors suit the current and voltage of your system before fitting. MC4 connectors should only be mated or separated using the correct MC4 disconnect tool, never by hand while live. UK grid-connected systems must meet the relevant wiring regulations and any applicable G98 or G99 connection agreement.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x 3-metre solar cable, 6mm², with one MC4-compatible male connector and one MC4-compatible female connector (PV-ST01) pre-fitted\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061065019680,"sku":"SCA000300100","price":8.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca000300100-1.webp?v=1785510510"},{"product_id":"solar-panel-cable-mc4-plug","title":"Victron Solar Cable 3m 4mm² MC4 Connectors PV-ST01 | SCA000300000","description":"\u003cp\u003eA factory-terminated solar panel cable from Victron Energy, 3 metres long with a 4mm² conductor, fitted with MC4-compatible male and female connectors (PV-ST01 type). It links panels to combiner boxes, charge controllers or other PV components without any on-site crimping.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 3 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor\u003c\/strong\u003e, 4mm² cross-section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, MC4-compatible PV-ST01, male one end, female the other\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.384 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e, Victron Energy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse this solar panel cable to extend or bridge string connections in residential PV arrays, to wire panels into combiner boxes or DC isolators, or to connect panels to Victron SmartSolar or BlueSolar MPPT charge controllers. It also suits repair or replacement of a damaged inter-panel lead on an existing array.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFit only in DC PV circuits and check the cable rating against the open-circuit voltage and short-circuit current of the array before use. MC4 connectors should be mated or separated only with the correct disconnect tool, never by hand while live. Installation should follow BS 7671 and any local wiring regulations, carried out by a qualified electrician or MCS-accredited installer.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x 3m solar cable, 4mm², with MC4-compatible male connector (PV-ST01)\u003c\/li\u003e\n\u003cli\u003e1 x MC4-compatible female connector (PV-ST01) pre-fitted to the opposite end\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061065183520,"sku":"SCA000300000","price":6.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca000300000-1.webp?v=1785510544"},{"product_id":"victron-solar-panel-cable-4mm-mc4","title":"Victron Solar Cable 5m 4mm² MC4 M\/F Connectors PV-ST01 | SCA000500000","description":"\u003cp\u003eA pre-terminated solar cable from Victron Energy, 5 metres long with a 4mm² conductor cross-section, fitted with MC4-compatible male and female connectors of the PV-ST01 type. It links solar panels to combiner boxes, charge controllers or other parts of a PV system, and suits both residential and commercial installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 5 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-section\u003c\/strong\u003e, 4mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, MC4-compatible male and female (PV-ST01), pre-fitted and ready to connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheathing\u003c\/strong\u003e, double-insulated, UV-resistant, suited to outdoor and rooftop use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e, DC solar wiring for panels and arrays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Victron MPPT charge controllers and other Victron PV system components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it to extend or interconnect solar panel strings on a roof, to wire an individual panel to a combiner box or DC isolator, or as a weatherproof cable run in an off-grid, mobile or marine system built around a Victron MPPT controller. The male and female ends on the same cable also make it suitable as a direct interconnect between two PV components.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eDC solar wiring should be carried out by a qualified electrician or MCS-accredited installer. Check the cable rating against the short-circuit current of the array before fitting it. MC4 connectors should only be mated or separated with the correct disconnect tool, and never under load. Grid-connected UK systems must meet BS 7671 and any applicable G98 or G99 network operator conditions.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x 5-metre solar cable, 4mm², MC4-compatible male connector at one end and female at the other (PV-ST01)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061065576736,"sku":"SCA000500000","price":12.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca000500000-1.webp?v=1785510614"},{"product_id":"victron-solar-panel-cable-6mm2","title":"Victron Solar Cable 1m 6mm² MC4 Male\/Female | PV-ST01 SCA000100100","description":"\u003cp\u003eA pre-assembled 1 metre solar cable from Victron Energy, fitted with MC4-compatible male and female connectors of the PV-ST01 type. It gives installers a ready-to-use bridging or extension lead for solar panel wiring, with no crimping or extra parts needed.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 1 metre, suited to short panel-to-panel or panel-to-combiner runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor\u003c\/strong\u003e, 6mm² cross-section, sized for standard residential and commercial PV string currents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, MC4-compatible male and female (PV-ST01), pre-fitted and ready to connect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e, one male end and one female end on a single cable, for direct in-line extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.144kg, easy to route in tight spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe 6mm² conductor is the usual cross-section for residential and light commercial PV string wiring across the UK and EU. A larger conductor cuts resistive losses over the run, which matters most where panels are wired in series strings at higher open-circuit voltages. At 1 metre, this cable suits bridging small gaps between panels, wiring into junction boxes, or extending an existing run without adding unnecessary resistance.\u003c\/p\u003e\u003cp\u003ePV-ST01 connectors are a widely used MC4-compatible standard, so this cable can be inserted straight into an existing PV circuit with no extra crimping or adapters. Victron offers other cable lengths and conductor sizes for longer runs.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtending or bridging PV panel wiring on rooftop solar installations.\u003c\/li\u003e\n\u003cli\u003eConnecting solar panels to string combiners or junction boxes.\u003c\/li\u003e\n\u003cli\u003eShort cable runs between panels and charge controllers in off-grid systems.\u003c\/li\u003e\n\u003cli\u003eRepairing or replacing damaged short-run PV cabling on existing installs.\u003c\/li\u003e\n\u003cli\u003eMobile and marine solar setups using standard MC4-type connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron solar cable, 1m, 6mm², with MC4-compatible male connector on one end and female connector on the other.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eMate and de-mate MC4 connectors only with the correct MC4 disconnect tool, to avoid damaging the connector housing. PV string wiring can carry high DC voltages, so all installation and wiring work should be done by a qualified electrician or MCS-accredited installer, in line with BS 7671 and the relevant IET wiring regulations. Never connect or disconnect MC4 connectors under load.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066363168,"sku":"SCA000100100","price":7.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca000100100-1.webp?v=1785510737"},{"product_id":"mc4-y-solar-panel-splitter","title":"Victron MC4-Y Solar Splitter Pair 1x M-2F \/ 1x F-2M | SCA520500000","description":"\u003cp\u003eThis Victron MC4-Y solar splitter pair lets you wire two solar panels in parallel right at the array, without a separate combiner box or extra cable runs back to the controller. The set includes one male-to-two-female (1x M-2F) connector and one female-to-two-male (1x F-2M) connector, together completing a full parallel branch on both the positive and negative sides.\u003c\/p\u003e\u003ch2\u003eVictron MC4-Y solar splitter for parallel panel wiring\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e, 1x M-2F and 1x F-2M supplied as a matched pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector format\u003c\/strong\u003e, MC4-compatible, fitting the standard connector used on most solar panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.115 kg per pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer\u003c\/strong\u003e, Victron Energy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e, SCA520500000, GTIN 8719076025238.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe M-2F half splits the positive conductor from one panel into two branches, while the F-2M half does the same on the negative side, so both poles are joined in parallel using parts from the same manufacturer. This keeps contact resistance and weatherproofing consistent across both connections, rather than mixing brands of Y-connector at each pole.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to parallel wiring of two panels with identical voltage and current ratings, on residential rooftops, off-grid arrays, marine and motorhome systems, or when adding a second panel to an existing single-panel string. Connecting panels of different ratings in parallel is not recommended.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eMC4 connectors need proper crimping and assembly tools for a weatherproof, low-resistance joint; poor assembly can cause arcing or water ingress. On grid-connected UK systems, installation should be carried out by a qualified installer in line with G98\/G99 and wiring regulations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x MC4-Y connector, male to two female (1x M-2F)\u003c\/li\u003e\n\u003cli\u003e1x MC4-Y connector, female to two male (1x F-2M)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066395936,"sku":"SCA520500000","price":10.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca520500000-1.webp?v=1785510749"},{"product_id":"solar-cable-1m-mc4-connectors","title":"Victron Solar Cable 1m 4mm² MC4 Connectors | PV-ST01 SCA000100000","description":"\u003cp\u003eA pre-terminated 1 metre solar cable from Victron Energy with MC4-compatible connectors, male at one end and female at the other. It's built for short interconnections between panels, combiners or junction points in a photovoltaic system, and works straight out of the box with no field crimping needed.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor size\u003c\/strong\u003e, 4mm² cross-section, standard for residential and light commercial PV string wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, PV-ST01 type, MC4-compatible, male fitted at one end and female at the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 1 metre, fixed, for short panel-to-panel or panel-to-combiner links.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.115 kg, easy to route in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use\u003c\/strong\u003e, factory-terminated connectors, no crimping required on site.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it for short panel-to-panel connections within an array, linking panels to string combiners or junction boxes, or bridging small gaps during system assembly or modification. It also works as a replacement or extension section where a 1 metre length of MC4-terminated cable is needed. Suited to residential and light commercial rooftop PV installations.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSolar PV wiring should be carried out by a qualified electrician or MCS-accredited installer to BS 7671 and applicable local regulations. MC4 connectors must only be mated or de-mated with the correct tools; never disconnect live MC4 connectors by hand. Check the cable rating against the maximum short-circuit current of the PV string before fitting. Grid-connected systems may require G98 or G99 notification depending on system size.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x 1 metre solar cable, 4mm², with MC4-compatible male connector at one end and female connector at the other.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061067116832,"sku":"SCA000100000","price":6.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca000100000-1.webp?v=1785510889"},{"product_id":"solar-panel-cable-10m-mc4","title":"Victron Solar Cable 10m 6mm² MC4 PV-ST01 | SCA001000100","description":"\u003cp\u003eA pre-assembled 10 metre solar DC cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type) at each end. It links solar panels to combiner boxes, charge controllers or inverter inputs in off-grid and grid-tied PV systems, and it arrives ready to connect with no field crimping needed.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 10 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-section\u003c\/strong\u003e, 6mm², suited to runs where a 4mm² cable would introduce more voltage drop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, MC4-compatible male and female (PV-ST01 type), factory fitted at each end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor rated\u003c\/strong\u003e, insulation designed for UV exposure and weathering in PV installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, approximately 1.5kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it to extend PV string cabling between panels and a combiner box or charge controller, including Victron SmartSolar and BlueSolar MPPT units. It suits off-grid cabin, van and marine solar setups where longer runs are needed, as well as commercial rooftop or ground-mount arrays and repairs to existing PV string cabling.\u003c\/p\u003e\u003ch3\u003eConnector compatibility\u003c\/h3\u003e\u003cp\u003eThe PV-ST01 MC4-compatible connectors mate with the connectors fitted to most crystalline and thin-film panels, and with the MC4 inputs on Victron SmartSolar and BlueSolar MPPT charge controllers. Pre-assembled termination avoids the risk of a poor field crimp, which can lead to arcing or early connector failure.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x 10 metre solar DC cable, 6mm² cross-section\u003c\/li\u003e\n\u003cli\u003e1 x MC4-compatible male connector (PV-ST01), factory fitted\u003c\/li\u003e\n\u003cli\u003e1 x MC4-compatible female connector (PV-ST01), factory fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThese cables carry voltage whenever the panels are in light, and there is no way to isolate a string without a dedicated DC isolator switch. Connections should be made by a qualified electrician or MCS-accredited installer. Do not mix connector brands within the same string, since mismatched MC4-type connectors can arc and void warranties. UK grid-connected systems should meet G98 or G99 requirements as applicable.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061068788000,"sku":"SCA001000100","price":27.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca001000100-1.webp?v=1785511179"},{"product_id":"victron-mono-solar-panel-235w","title":"Victron 235W Monocrystalline Solar Panel 72-Cell | SPM042357204","description":"\u003cp\u003eThe Victron Energy 235W monocrystalline solar panel is a 72-cell module built for off-grid systems, battery charging arrays and commercial installations. It measures 1350 x 880 x 30mm and weighs 12.48kg, making it a practical choice where roof or ground space is limited.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak power\u003c\/strong\u003e, 235W from a 72-cell monocrystalline silicon configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e, 1350 x 880 x 30mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 12.48kg, suited to standard roof mounting structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCell type\u003c\/strong\u003e, monocrystalline silicon, cut from a single crystal structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e, part of Victron Energy's Series 4d panel range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e, SPM042357204, GTIN 8719076079453.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe 72-cell layout is a commercial format producing a higher open-circuit voltage than the 60-cell panels common in residential arrays. This makes it a fit for systems using MPPT charge controllers or inverter-chargers set up for higher string voltages. Installers should check string voltage calculations against the charge controller or inverter's input specification before finalising an array design.\u003c\/p\u003e\u003cp\u003eAt 30mm frame depth, the panel works with most standard aluminium rail mounting systems. The Series 4d designation marks a defined generation in Victron's panel catalogue, useful for keeping specification consistent across multi-panel orders.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid battery charging with Victron MPPT charge controllers.\u003c\/li\u003e\n\u003cli\u003eRemote power for telecoms, agricultural and rural sites.\u003c\/li\u003e\n\u003cli\u003eMarine and motorhome arrays where weight and footprint matter.\u003c\/li\u003e\n\u003cli\u003eCommercial rooftop or ground-mount arrays needing consistent panels across a large order.\u003c\/li\u003e\n\u003cli\u003eHybrid and backup systems paired with Victron MultiPlus or Quattro inverter-chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 235W 72-cell monocrystalline solar panel (Series 4d)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or MCS-accredited installer. The 72-cell format produces higher string voltages than 60-cell panels, so string voltage must stay within the maximum input rating of the connected charge controller or inverter. Grid-connected installations require G98 or G99 compliance and DNO notification. Mounting structures must be rated for the panel's weight plus site wind and snow loading, and DC wiring should use MC4 or compatible connectors rated for outdoor solar use.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095599280416,"sku":"SPM042357204","price":131.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-spm042357204-1.webp?v=1785754629"},{"product_id":"mc4-mc3-solar-adapter-cable-sca500200000","title":"Victron MC4\/F to MC3\/M Solar Adapter Cable 15cm | SCA500200000","description":"\u003cp\u003eThis Victron Energy adapter cable converts an MC4 female connector to an MC3 male connector, letting solar panels or cables terminated in MC4 plug into MC3-compatible charge controllers, junction boxes or existing wiring. At 15cm long, it is built for short-reach connections rather than cable runs.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type\u003c\/strong\u003e, MC4 female to MC3 male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length\u003c\/strong\u003e, 15cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 35g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect fit\u003c\/strong\u003e, no tools or crimping needed to join MC4 and MC3 systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eMC4 and MC3 connectors do not mate directly, which becomes a problem when a newer panel needs to connect to an older MC3-based controller, or when an existing MC3 system is being extended with MC4 equipment. This cable bridges that gap without re-terminating either end.\u003c\/p\u003e\u003cp\u003eThe MC4 female end takes a standard MC4 male plug from a panel or extension cable. The MC3 male end plugs straight into an MC3 female socket on the receiving equipment. Its short length suits use at the connection point between a panel lead and a controller input, or inside a combiner box where space is tight.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnecting MC4-terminated solar panels to MC3-input charge controllers\u003c\/li\u003e\n\u003cli\u003eAdding MC4 panels into existing MC3-based off-grid systems\u003c\/li\u003e\n\u003cli\u003eUse inside combiner boxes or junction enclosures where connector types differ\u003c\/li\u003e\n\u003cli\u003eRetrofit installations where replacing existing MC3 wiring is impractical\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Solar adapter cable, MC4 female to MC3 male, 15cm\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis adapter is intended for low-voltage DC solar PV circuits. Check the cable and connectors are rated for your system's voltage and current before fitting. Solar PV wiring should be carried out by a qualified electrician or accredited installer, with connections fully seated and weatherproofed where exposed to the elements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095607079200,"sku":"SCA500200000","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca500200000-1.webp?v=1785755430"},{"product_id":"victron-solar-panel-cable-6mm-mc4","title":"Victron Solar Cable 5m 6mm² MC4 M\/F Connectors | PV-ST01 SCA000500100","description":"\u003cp\u003eA pre-assembled 5-metre solar DC cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type). It connects solar panels to combiner boxes, charge controllers or other DC wiring in a PV installation. The 6mm² cross-section suits higher-current panel strings where voltage drop and heat matter.\u003c\/p\u003e\u003ch2\u003eKey features of this solar panel cable\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 5 metres, ready to install with no crimping or termination needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor size\u003c\/strong\u003e, 6mm² cross-section for higher-current PV string connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, MC4-compatible PV-ST01 male and female, one at each end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, UV-resistant cable construction for outdoor DC solar use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier\u003c\/strong\u003e, Victron Energy.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003ePre-terminated cables remove the risk of a poorly crimped connector on site. This one arrives with a PV-ST01 male connector at one end and a female connector at the other, so it works as a direct extension or interconnect for standard MC4-equipped panels and components.\u003c\/p\u003e\u003cp\u003eThe 6mm² conductor suits longer cable runs or higher panel current, cutting resistive losses compared with the more common 4mm² option. Over a 5-metre run, this helps keep voltage drop within acceptable limits and reduces heat build-up in the cable.\u003c\/p\u003e\u003cp\u003eMC4 (PV-ST01) connectors are the industry standard for solar panel interconnection. They are rated for outdoor use and provide a secure locking connection, compatible with most solar panels and DC components on the market. Check connector brand compatibility before mixing types on the same string.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtending or interconnecting solar panel strings in residential and commercial PV systems.\u003c\/li\u003e\n\u003cli\u003eConnecting panels to string combiner boxes or DC isolators.\u003c\/li\u003e\n\u003cli\u003eOff-grid systems where panels feed directly into a charge controller or inverter-charger.\u003c\/li\u003e\n\u003cli\u003eReplacement or extra cabling for existing MC4-equipped PV arrays.\u003c\/li\u003e\n\u003cli\u003eMarine and mobile solar installations using standard MC4-compatible panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron solar cable, 5m, 6mm², with MC4-compatible PV-ST01 male connector at one end and female connector at the other.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eDC solar wiring should be carried out by a qualified electrician or MCS-accredited installer. Check cable polarity before making any connection, and confirm the PV-ST01 connectors are compatible with the connector brand used elsewhere in the string. Mixing connector brands without checking cross-compatibility can create a fire or arc-fault risk. On grid-connected systems, all DC wiring must comply with current UK wiring regulations and any applicable G98 or G99 requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095617040672,"sku":"SCA000500100","price":12.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sca000500100-1.webp?v=1785756567"},{"product_id":"victron-solar-panel-cable-6mm-20m","title":"Victron Solar Cable 20m 6mm² MC4 M\/F PV-ST01 | SCA002000100","description":"\u003cp\u003eA pre-assembled 20 metre solar DC cable from Victron Energy, fitted with MC4-compatible male and female connectors (PV-ST01 type) at each end. It is intended for connecting solar panels to charge controllers, combiner boxes or other DC system components in off-grid and grid-tied installations.\u003c\/p\u003e\u003ch2\u003eKey features of this solar panel cable\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 20 metres, enough for most roof-to-inverter or panel-to-combiner runs without extra joins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor\u003c\/strong\u003e, 6mm² cross-section, suited to higher-current PV string runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, MC4-compatible male and female (PV-ST01), pre-fitted for direct plug-in to standard MC4 leads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, solar-rated cable construction for outdoor UV exposure, temperature cycling and PV DC voltage levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnds\u003c\/strong\u003e, one male, one female, for straightforward polarity management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 3.024kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it to extend PV string leads from roof-mounted panels down to a ground-floor inverter or charge controller, or to link a combiner box output to the DC input of a Victron MPPT controller or MultiPlus inverter\/charger. It also suits off-grid cabins, caravans, marine installations and ground-mount arrays where the panels sit some distance from the battery or inverter enclosure.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or MCS-accredited installer. Check the cable rating against the maximum open-circuit voltage and short-circuit current of the array before connecting anything. Do not mix MC4-compatible connectors from different manufacturers on the same circuit, as tolerances vary and can affect contact and ingress protection. Confirm the 6mm² cross-section is adequate for the system's maximum current and run length. Grid-connected systems must meet the relevant requirements of BS 7671 and any applicable G98 or G99 agreement.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x 20 metre solar cable, 6mm², with MC4-compatible male connector (PV-ST01) at one end and female connector (PV-ST01) at the other\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095617171744,"sku":"SCA002000100","price":51.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/SCA002000100.jpg?v=1785757234"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/victron-solar-panels-mc4-cables.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}