{"title":"Victron Battery Monitors and SmartShunt","description":"\u003cp\u003eAccurate state of charge readings rely on more than a voltage reading at rest. Victron battery monitors track current, voltage and temperature and use coulomb counting to work out exactly how much charge is left, which is far more reliable than reading voltage alone.\u003c\/p\u003e\u003cp\u003eThe SmartShunt packs a shunt and Bluetooth connectivity into one compact unit, so you get full monitoring through the Victron app without needing a separate display. It's available in 500A, 1000A and 2000A ratings, plus an IP65 version for damp or exposed installations. The BMV-712 adds a physical display panel with historical data and a relay output for those who want a dedicated screen rather than relying on a phone.\u003c\/p\u003e\u003cp\u003eBoth ranges integrate with Victron GX devices and the VRM portal, and a temperature sensor is available for the BMV-702\/712 to add temperature compensation to the readings.\u003c\/p\u003e","products":[{"product_id":"victron-bmv-712-battery-monitor","title":"Victron BMV-712 Smart Battery Monitor | BAM030712000","description":"\u003cp\u003eThe Victron BMV-712 Smart is a battery monitor for 12V, 24V and 48V systems, measuring voltage, current, power and consumed amp-hours to give an accurate read on state of charge. Built-in Bluetooth connects directly to the VictronConnect app on iOS and Android, so there's no separate dongle needed.\u003c\/p\u003e\u003ch2\u003eVictron BMV-712 Smart battery monitor features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eState of charge display\u003c\/strong\u003e: shows percentage, voltage, current, power and consumed amp-hours together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth connectivity\u003c\/strong\u003e: pairs with the VictronConnect app for setup, live data and history.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable relay\u003c\/strong\u003e: can be set to trigger alarms or switch external devices at configurable thresholds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMidpoint voltage monitoring\u003c\/strong\u003e: helps flag imbalance across series-connected battery banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHistorical data logging\u003c\/strong\u003e: records deepest discharge, average discharge, charge cycles and time since full charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacklit display\u003c\/strong\u003e: panel-mount LCD readable in low light.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits off-grid solar systems, marine and narrowboat installations, motorhome and campervan leisure battery setups, and backup power systems where battery condition needs tracking. On 48V series banks, the midpoint voltage reading makes it easier to spot a battery drifting out of balance. It also integrates with the Victron GX device range, feeding data to a Venus GX or Cerbo GX for monitoring through the VRM portal.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-712 Smart monitor head unit with backlit display\u003c\/li\u003e\n\u003cli\u003e500A\/50mV shunt\u003c\/li\u003e\n\u003cli\u003eRJ12 connection cable (monitor to shunt)\u003c\/li\u003e\n\u003cli\u003eBattery cable with fuse\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstall with a qualified electrician or experienced DC system integrator. The shunt fits on the negative battery terminal.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053861040416,"sku":"BAM030712000","price":115.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam030712000-1.webp?v=1785421291"},{"product_id":"victron-smartshunt-battery-monitor","title":"Victron SmartShunt 500A\/50mV Battery Monitor | SHU050150050","description":"\u003cp\u003eThe Victron SmartShunt 500A\/50mV is a standalone battery monitor that tracks state of charge, consumed amp hours and voltage without needing a separate display. It pairs directly with the VictronConnect app over Bluetooth, giving installers and off-grid builders accurate battery data without the cost of a full BMV monitor.\u003c\/p\u003e\u003ch2\u003eKey features of this smart shunt battery monitor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShunt rating\u003c\/strong\u003e, 500A continuous current with a 50mV shunt drop, suitable for 12V, 24V and 48V battery banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth connectivity\u003c\/strong\u003e, built-in Bluetooth links to VictronConnect on iOS and Android for live readings and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitored data\u003c\/strong\u003e, state of charge (%), consumed amp hours, voltage, current, power and time remaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery chemistry support\u003c\/strong\u003e, works with lead-acid (AGM, gel, flooded) and lithium (LiFePO4) batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact form factor\u003c\/strong\u003e, shunt-only design removes the need for a separate display, saving panel space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Direct port\u003c\/strong\u003e, connects to Victron GX devices, MPPT solar charge controllers and other compatible equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe 50mV shunt drop at 500A gives the SmartShunt a precise reference for measuring current flowing in and out of the battery. That data is processed internally and sent over Bluetooth to VictronConnect, where readings and history can be reviewed and monitoring parameters adjusted. No display unit is needed, though one can be added later.\u003c\/p\u003e\u003cp\u003eThrough the VE.Direct port, the SmartShunt can feed state-of-charge data into a Victron GX device such as a Cerbo GX, making it visible on the VRM portal and usable for load shedding or generator start logic elsewhere in the system.\u003c\/p\u003e\u003cp\u003eAccurate SoC tracking depends on setup. Battery capacity, charge efficiency factor, Peukert exponent and tail current threshold can all be adjusted for the specific battery bank in use.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems needing SoC monitoring without a dedicated display panel.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat installations where panel space is limited.\u003c\/li\u003e\n\u003cli\u003eMotorhome and campervan leisure battery banks on 12V or 24V systems.\u003c\/li\u003e\n\u003cli\u003eVictron systems using a Cerbo GX or other GX device via VE.Direct.\u003c\/li\u003e\n\u003cli\u003eRetrofit monitoring on existing battery banks where a full BMV is not required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVictron SmartShunt 500A\/50mV unit\u003c\/li\u003e\n\u003cli\u003eVE.Direct cable\u003c\/li\u003e\n\u003cli\u003eConnection cable for battery negative\u003c\/li\u003e\n\u003cli\u003eDocumentation and quick-start guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe SmartShunt fits in the negative battery lead, between the battery negative terminal and all other negative connections. All negative return current must pass through the shunt for accurate readings. Bypassing it with a direct chassis ground will give incorrect results. Installation should be carried out by a qualified electrician or experienced DC systems installer, and by an MCS-accredited installer where the system forms part of a solar PV installation.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060512616736,"sku":"SHU050150050","price":72.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu050150050-1.webp?v=1785490772"},{"product_id":"victron-temp-sensor-bmv-702-712","title":"Victron Temperature Sensor for BMV-702\/712 | ASS000100000","description":"\u003cp\u003eThe Victron temperature sensor is a plug-in accessory for the BMV-702 and BMV-712 battery monitors. It connects to the monitor's accessory port and adds battery temperature measurement to the existing voltage, current and state-of-charge readings.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with the Victron BMV-702 and BMV-712 battery monitors via the dedicated accessory port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature display\u003c\/strong\u003e, shows battery temperature directly on the BMV monitor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth data\u003c\/strong\u003e, on a BMV-712, temperature is transmitted to the VictronConnect app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature compensation\u003c\/strong\u003e, supports temperature-compensated state-of-charge calculations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.07 kg, plug-in fitting with no additional tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUseful on off-grid solar systems where battery temperature shifts with the seasons, and on marine or motorhome installations where ambient conditions vary. Lead-acid battery banks benefit most, since charge acceptance and capacity change with temperature. Fit it to any BMV-702 or BMV-712 installation where temperature monitoring is wanted.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe sensor plugs into the monitor's accessory port with no wiring changes beyond connecting it to the battery terminal and the port itself. Check the port is not already used by a midpoint voltage sensor or other accessory before fitting. Work on battery systems should be carried out with care, and a qualified installer is recommended for larger off-grid or marine banks.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron temperature sensor for BMV-702\/712 (ASS000100000)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060513992992,"sku":"ASS000100000","price":22.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ass000100000-1.webp?v=1785490893"},{"product_id":"victron-smartshunt-2000a-monitor","title":"Victron SmartShunt 2000A Battery Monitor | SHU050220050","description":"\u003cp\u003eThe Victron SmartShunt 2000A is a standalone battery shunt monitor built for high-current battery systems that need accurate state-of-charge tracking. It pairs directly with a smartphone or tablet over Bluetooth, so there's no separate display unit to wire in or mount. It suits professional off-grid, marine and vehicle installs running large battery banks.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 2000A continuous, for large battery banks and high-draw systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, built-in Bluetooth for the Victron Connect app on iOS and Android, plus a VE.Direct port for GX devices, MPPT controllers and other Victron gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring data\u003c\/strong\u003e, state of charge, voltage, current, power, consumed amp-hours and time remaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact design\u003c\/strong\u003e, the SmartShunt is the monitor itself, with no display panel required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery chemistry support\u003c\/strong\u003e, lead-acid (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarms\u003c\/strong\u003e, configurable alarm and relay outputs for low state-of-charge or voltage thresholds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe SmartShunt replaces the usual shunt-and-display pairing with one unit. All data comes through the Victron Connect app over Bluetooth, giving a live dashboard of battery status without a dedicated panel taking up space, which matters in motorhomes, narrowboats and off-grid cabins.\u003c\/p\u003e\u003cp\u003eAt 2000A it's the highest-rated model in the SmartShunt range, aimed at very large battery banks or high continuous loads: electric propulsion assist, large inverter setups, commercial off-grid sites. The VE.Direct port lets it feed a Cerbo GX or other GX device for a full Victron system. Battery chemistry and capacity are set in the app for accurate state-of-charge readings.\u003c\/p\u003e\u003cp\u003eIt also synchronises with solar charge controllers and other sources, so the state-of-charge figure accounts for every charge and discharge path rather than just the ones it can see directly.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eLarge off-grid battery systems, marine and narrowboat installs, motorhome and coach conversions with heavy 12V or 24V loads, commercial off-grid sites with multiple battery strings, Victron systems built around a Cerbo GX or Venus GX, and electric vehicle auxiliary battery monitoring.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis unit should be fitted by a qualified electrician or experienced system integrator. At 2000A, incorrect wiring on a DC system this size carries a serious risk. The shunt goes on the negative battery terminal side, with all negative loads and charge sources wired to the load side of it. Cable sizing and fusing must match the system current, and battery parameters should be set in the Victron Connect app before commissioning.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron SmartShunt 2000A (SHU050220050)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060515303712,"sku":"SHU050220050","price":159.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu050220050-1.webp?v=1785491102"},{"product_id":"victron-smartshunt-battery-monitor-ip65","title":"Victron SmartShunt 500A\/50mV IP65 | SHU065150050","description":"\u003cp\u003eThe Victron SmartShunt 500A\/50mV IP65 is a standalone battery monitor built for solar, off-grid and marine systems where accurate state-of-charge readings matter. It connects to a smartphone or tablet over Bluetooth, so there's no need for a separate display unit. The IP65 rating means it can be fitted in damp or dusty locations.\u003c\/p\u003e\u003ch2\u003eVictron SmartShunt key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShunt rating\u003c\/strong\u003e, 500A \/ 50mV, suited to high-capacity battery banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 enclosure\u003c\/strong\u003e, protected against dust ingress and low-pressure water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth connectivity\u003c\/strong\u003e, pairs directly with the Victron Connect app on iOS and Android.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, tracks state of charge, voltage, current, power, consumed amp-hours and time remaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurable settings\u003c\/strong\u003e, battery capacity, charge efficiency factor, Peukert exponent and tail current, for lead-acid, AGM, gel and lithium chemistries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay output\u003c\/strong\u003e, programmable for high or low voltage alarms, state-of-charge alarms or other user-defined triggers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Direct port\u003c\/strong\u003e, links to Victron GX devices, MPPT controllers and Venus OS installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe SmartShunt replaces a separate shunt-and-display combination with one compact unit. Configuration and monitoring both happen in the Victron Connect app, so no wiring is needed for a remote panel. That suits installations where panel space is tight or the battery bank sits somewhere awkward. Fed through a VE.Direct cable, the SmartShunt's readings can also appear on a Cerbo GX or Venus GX alongside solar yield, inverter load and grid status.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems needing battery monitoring without a dedicated display.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat installations, where IP65 protection guards against condensation and bilge spray.\u003c\/li\u003e\n\u003cli\u003eMotorhome, campervan and caravan leisure batteries, monitored from a phone.\u003c\/li\u003e\n\u003cli\u003eBattery storage integrated with Victron GX devices for whole-system visibility via Venus OS.\u003c\/li\u003e\n\u003cli\u003eOff-grid installations where the battery enclosure sits away from any control panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe SmartShunt fits in the negative battery cable, between the battery negative terminal and every other negative connection in the system. All negative loads and charge sources must pass through it for the current reading to be accurate. Systems above 48V, or lithium installations, should be wired by a qualified electrician. A VE.Direct cable is needed for GX integration but isn't included.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron SmartShunt 500A\/50mV IP65 unit\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060516745504,"sku":"SHU065150050","price":78.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu065150050-1.webp?v=1785491348"},{"product_id":"victron-smartshunt-battery-monitor-1000a","title":"Victron SmartShunt 1000A Battery Monitor | SHU050210050","description":"\u003cp\u003eThe Victron SmartShunt 1000A is a standalone battery monitor for solar, off-grid and marine installations that need accurate state-of-charge tracking. It pairs directly with a smartphone or tablet over Bluetooth, so there's no separate display unit to fit. It works with any battery chemistry, which makes it a practical choice for installers who want reliable monitoring without extra hardware.\u003c\/p\u003e\u003ch2\u003eVictron smartshunt battery monitor features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 1000A continuous, suited to large battery banks in off-grid, marine and commercial vehicle systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, Bluetooth via the VictronConnect app plus a VE.Direct port for GX devices and the VRM portal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitored data\u003c\/strong\u003e, state of charge, voltage, current, power, consumed amp-hours, time to go and history.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, lead-acid types (AGM, gel, flooded) and lithium including LiFePO4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurable parameters\u003c\/strong\u003e, capacity, Peukert exponent, charge efficiency factor and tail current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor\u003c\/strong\u003e, shunt-only design with no monitor head, so it takes up less panel space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eAll the monitoring electronics sit inside the shunt body itself, rather than in a separate display unit. Readings go straight to the VictronConnect app, giving a real-time view of battery status on a phone or tablet. That suits enclosures, camper van builds and remote off-grid cabinets where a permanent screen isn't needed.\u003c\/p\u003e\u003cp\u003eThe VE.Direct port lets the SmartShunt feed data into a Cerbo GX or other Victron GX device for remote monitoring through VRM. Because the battery parameters are configurable, the monitor can be calibrated to the exact bank it's connected to.\u003c\/p\u003e\u003cp\u003eThere's no on-unit display. If a permanent panel readout is needed, a BMV-712 or GX display would be the better fit. Where app-based or remote monitoring is enough, the SmartShunt gives the same measurement in a smaller package.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eLarge off-grid solar battery banks, marine and narrowboat DC systems with limited panel space, commercial vehicle and motorhome leisure batteries, Victron systems with a Cerbo GX for VRM monitoring, and parallel battery banks where current draw exceeds smaller shunts.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVictron SmartShunt 1000A (SHU050210050)\u003c\/li\u003e\n\u003cli\u003eConnection cable for battery negative and auxiliary input\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit the SmartShunt in the negative battery cable, between the battery negative terminal and all other negative connections, so every load and charge source returns through it. Installation in high-current DC systems should be carried out by a qualified electrician or experienced installer, following the relevant wiring standards for the installation type. No separate power supply is needed beyond the battery connection.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060525363488,"sku":"SHU050210050","price":124.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu050210050-1.webp?v=1785492441"},{"product_id":"victron-smartshunt-300a-monitor","title":"Victron SmartShunt 300A Battery Monitor | SHU050130050","description":"\u003cp\u003eThe Victron SmartShunt 300A is a standalone battery monitor that connects via Bluetooth to the VictronConnect app, tracking state of charge, voltage, current, power, consumed amp-hours and time remaining without needing a separate display. It suits off-grid, marine, vehicle and backup power installations where accurate battery data matters.\u003c\/p\u003e\u003ch2\u003eKey features of the Victron SmartShunt 300A\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, tracks state of charge, voltage, current, power, consumed amp-hours and time-to-go via Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 300A continuous with a 500A peak current capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp connection\u003c\/strong\u003e, pairs directly with VictronConnect on iOS and Android, no additional hardware required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, works with lead-acid, AGM, gel, lithium (LiFePO4) and lithium-ion chemistries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e, compact, display-free unit that simplifies installation compared to a shunt-and-display setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Direct output\u003c\/strong\u003e, integrates with Victron GX devices and the Venus OS ecosystem\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe shunt carries the battery negative current while internal electronics measure the voltage drop across the precision resistor to calculate current flow. Readings are sent over Bluetooth Low Energy to VictronConnect, which shows live and historical data on a phone or tablet. Charge and discharge efficiency factors, the Peukert exponent and tail current settings can all be adjusted, and configuring these for your specific battery bank gives more reliable state-of-charge readings than the factory defaults.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar battery banks needing accurate state-of-charge monitoring\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat 12V or 24V house battery systems\u003c\/li\u003e\n\u003cli\u003eMotorhome, campervan and vehicle leisure battery installations\u003c\/li\u003e\n\u003cli\u003eBackup power and UPS systems where battery health visibility matters\u003c\/li\u003e\n\u003cli\u003eExisting Victron installations via VE.Direct and GX devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVictron SmartShunt 300A unit\u003c\/li\u003e\n\u003cli\u003eVE.Direct cable\u003c\/li\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eNegative battery cable connection hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe SmartShunt fits in the negative battery cable, between the battery negative terminal and every other negative connection in the system. All negative loads and chargers must return through the shunt for accurate current measurement. Fitting in a 12V, 24V or 48V DC system should be done by a qualified electrician or an installer experienced with battery systems, and marine installations should follow relevant BMEA or ISO wiring standards.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060760211744,"sku":"SHU050130050","price":56.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu050130050-1.webp?v=1785504599"},{"product_id":"smartshunt-300a-ip65-monitor","title":"Victron SmartShunt 300A IP65 Battery Monitor | SHU065130050","description":"\u003cp\u003eThe Victron SmartShunt 300A IP65 is a battery monitor that tracks current, voltage, state of charge, consumed amp-hours and time-to-go, sending all readings over Bluetooth to the VictronConnect app. There is no screen on the unit itself, which keeps it compact and lets it sit closer to the battery bank than a monitor with a fixed display.\u003c\/p\u003e\u003ch2\u003eVictron SmartShunt 300A features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 300A continuous, suited to 12V, 24V and 48V systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, IP65 enclosure, rated against dust ingress and low-pressure water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, built-in Bluetooth, no separate dongle, pairs with VictronConnect on iOS and Android.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, state of charge, voltage, current, consumed amp-hours, instantaneous power and time-to-go from one device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with lead-acid (AGM, gel, flooded) and lithium (LiFePO4) batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.31 kg, with the shunt built into the unit so no separate shunt box is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere it fits\u003c\/h2\u003e\u003cp\u003eBecause there's no display to read, the sealed IP65 body is happy in spots a standard monitor wouldn't tolerate: engine bays, bilges, outdoor enclosures, agricultural vehicles. It suits off-grid solar banks, marine installs, campervan and motorhome systems, and auxiliary power on HGVs or construction plant.\u003c\/p\u003e\u003ch3\u003eSystem integration\u003c\/h3\u003e\u003cp\u003eBluetooth pairing lets the SmartShunt feed a Victron GX device (Cerbo GX, Venus GX and similar), putting battery data into the VRM portal alongside the rest of a monitored system.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit the SmartShunt in the negative line between the battery bank and every load and charge source, with only the battery negative wired directly to the shunt. Wiring it any other way gives inaccurate readings. Installation should be done by someone experienced with DC battery systems, and an MCS-accredited installer is recommended for off-grid solar work. Fuse the positive cable as the battery manufacturer specifies.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron SmartShunt 300A IP65 unit\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060761653536,"sku":"SHU065130050","price":57.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu065130050-1.webp?v=1785504889"},{"product_id":"victron-bmv-700-battery-monitor-shunt","title":"Victron BMV-700 Battery Monitor 12V 24V 48V Retail Pack | BAM010700000R","description":"\u003cp\u003eThe Victron BMV-700 is a battery monitor for 12V, 24V and 48V systems. It uses a 500A\/50mV shunt to track state of charge, voltage, current, power and time remaining, giving installers and operators real-time data on battery condition rather than a voltage estimate.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eState of charge\u003c\/strong\u003e, calculated from actual current flow, shown as a percentage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurements\u003c\/strong\u003e, battery voltage, charge\/discharge current, power in watts and time remaining at current load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay output\u003c\/strong\u003e, programmable to trigger alarms or control external devices based on SOC, voltage or temperature thresholds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e, backlit, with rotary dial navigation for use in low light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery chemistries\u003c\/strong\u003e, configurable for lead-acid (flooded, AGM, gel) and lithium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShunt included\u003c\/strong\u003e, 500A\/50mV, fitted without interrupting the main battery circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData logging\u003c\/strong\u003e, records deepest discharge, average discharge, total charge cycles and cumulative energy throughput.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eBecause the BMV-700 measures current through the shunt rather than estimating from voltage alone, it accounts for the non-linear relationship between voltage and state of charge. This matters most on lithium batteries and heavily cycled lead-acid banks. Settings such as battery capacity, Peukert exponent, charge efficiency factor and tail current are all adjustable from the front panel and stored in non-volatile memory.\u003c\/p\u003e\u003cp\u003eA VE.Direct port allows connection to Victron GX devices, the Victron Connect app (via a VE.Direct to USB or Bluetooth dongle, sold separately) and compatible MPPT charge controllers for system-wide monitoring.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuits off-grid solar systems, marine and narrowboat installations, motorhome and campervan leisure batteries, and backup power or UPS systems running lead-acid or lithium banks. Also used on telecoms and remote sites where logged energy data is needed.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThe shunt fits on the negative battery terminal, between the battery bank and all loads and charge sources; incorrect placement gives inaccurate SOC readings. Installation should be carried out by a qualified electrician or experienced system integrator, and marine installs should follow relevant BMEA or RYA wiring standards.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-700 display unit\u003c\/li\u003e\n\u003cli\u003e500A\/50mV shunt\u003c\/li\u003e\n\u003cli\u003eRJ12 connection cable (display to shunt)\u003c\/li\u003e\n\u003cli\u003eTemperature sensor connection cable\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061010198816,"sku":"BAM010700000R","price":79.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam010700000r-1.webp?v=1785508464"},{"product_id":"bmv-712-smart-battery-monitor","title":"Victron BMV-712 Black Smart Battery Monitor 500A Shunt | BAM030712200","description":"\u003cp\u003eThe Victron BMV-712 Black Smart is a battery monitor for 12V, 24V and 48V systems. It tracks state of charge, voltage, current, power, consumed amp-hours and time remaining, and sends all of that data to a phone over Bluetooth. No separate dongle is needed, the module is built in.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDisplays state of charge, voltage, current, power, consumed amp-hours and time-to-go on a backlit LCD\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth Smart (BLE) connects to the VictronConnect app on iOS and Android\u003c\/li\u003e\n\u003cli\u003eSecond voltage input for monitoring a starter battery or solar input alongside the main bank\u003c\/li\u003e\n\u003cli\u003eProgrammable relay output with a dry contact for alarms or external device control\u003c\/li\u003e\n\u003cli\u003eWorks with lead-acid batteries (AGM, gel, flooded) and lithium LiFePO4\u003c\/li\u003e\n\u003cli\u003eBlack housing, matching black panels and switchgear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eA precision shunt, supplied in the box, measures current flowing in and out of the battery bank. From that reading the BMV-712 calculates state of charge as a percentage, consumed amp-hours and an estimated time remaining at the current discharge rate. Getting accurate readings depends on setting the battery capacity, Peukert exponent and charge efficiency factor correctly, which is done through the display or VictronConnect.\u003c\/p\u003e\u003cp\u003eThe second voltage input suits marine and motorhome setups where a starter battery needs watching alongside the house bank. The relay can be wired to trigger a low-battery alarm, a load disconnect or a generator start, and it can also link into a wider Victron system through its VE.Direct port to a GX device such as the Cerbo GX.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems needing accurate state of charge tracking\u003c\/li\u003e\n\u003cli\u003eMarine installations monitoring a house bank and a starter battery together\u003c\/li\u003e\n\u003cli\u003eMotorhome and campervan leisure battery systems with remote Bluetooth monitoring\u003c\/li\u003e\n\u003cli\u003eLithium (LiFePO4) installations requiring precise coulomb counting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-712 Black Smart monitor head unit\u003c\/li\u003e\n\u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n\u003cli\u003e10 metre connection cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061012427040,"sku":"BAM030712200","price":115.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam030712200-1.webp?v=1785508862"},{"product_id":"victron-battery-monitor-bmv-712-shunt","title":"Victron BMV-712 Smart Battery Monitor 500A Shunt Retail Pack | BAM030712000R","description":"\u003cp\u003eThe Victron BMV-712 Smart is a battery monitor for 12V, 24V and 48V systems. It tracks state of charge, voltage, current, power and consumed amp-hours, and sends the data over Bluetooth to the VictronConnect app on iOS and Android.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth\u003c\/strong\u003e, built-in Bluetooth Smart (BLE) connects directly to VictronConnect, no dongle needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurements\u003c\/strong\u003e, state of charge, voltage, current up to 500A via the included shunt, power in watts and consumed amp-hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual voltage input\u003c\/strong\u003e, a second input can monitor an auxiliary or starter battery, or midpoint voltage on a bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay output\u003c\/strong\u003e, programmable single-pole relay for alarms or switching based on voltage, SOC or temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e, backlit LCD with rotary encoder for readout without a phone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Smart Networking\u003c\/strong\u003e, shares battery data with other Victron devices, and works with VRM when connected to a GX device.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eA 500A\/50mV shunt measures current in and out of the battery. The BMV-712 uses this to calculate state of charge by coulomb counting, which holds up better under load than voltage-based estimates. It logs charge cycles, deepest discharge, average discharge and time since last full charge. Settings such as battery capacity, Peukert exponent, charge efficiency factor and tail current are all adjustable through VictronConnect.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar systems, marine dual-battery setups with a house bank and starter battery, motorhome and campervan leisure batteries, and backup power systems where battery condition needs tracking. The shunt fits on the negative conductor between the battery negative terminal and the rest of the system's negative connections.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-712 Smart display unit\u003c\/li\u003e\n\u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n\u003cli\u003e10 metre connection cable between shunt and display\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061012787488,"sku":"BAM030712000R","price":111.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam030712000r-1.webp?v=1785508917"},{"product_id":"battery-monitor-bmv-702-500a-shunt","title":"Victron BMV-702 Battery Monitor 500A Shunt Retail | BAM010702000R","description":"\u003cp\u003eThe Victron BMV-702 is a battery monitor for 12V, 24V and 48V systems, built around a 500A\/50mV shunt that tracks every amp flowing in and out of the battery bank. It reports state of charge, voltage, current, power and time remaining, giving installers and boat or motorhome owners a clear picture of battery health.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eState of charge\u003c\/strong\u003e, shown as a percentage using Peukert-corrected ampere-hour counting rather than voltage estimation alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent measurement\u003c\/strong\u003e, up to 500A via the included shunt, with voltage, power in watts and consumed amp-hours also displayed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime-to-go\u003c\/strong\u003e, calculated from the current discharge rate for a realistic runtime estimate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable relay\u003c\/strong\u003e, switches on SOC, voltage or temperature thresholds for alarms or load control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery chemistry support\u003c\/strong\u003e, lead-acid types (AGM, gel, flooded) and lithium LiFePO4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMidpoint voltage monitoring\u003c\/strong\u003e, flags cell or battery imbalance in series 24V or 48V banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth setup\u003c\/strong\u003e, configurable via the VictronConnect app when paired with an optional VE.Direct Bluetooth Smart dongle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe display connects to the shunt by a CAT5 cable, and the shunt sits on the negative battery terminal with all loads and charge sources wired to its load side. A VE.Direct port allows connection to Victron GX devices, MPPT charge controllers and the VRM portal, though a VE.Direct cable itself is not included.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar systems, marine and narrowboat electrics, motorhome leisure battery setups, backup power systems, and larger 24V or 48V banks where midpoint monitoring helps catch early imbalance. It also integrates into Victron systems that report to the VRM portal via a GX device.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-702 display unit\u003c\/li\u003e\n\u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n\u003cli\u003eCAT5 connection cable (display to shunt)\u003c\/li\u003e\n\u003cli\u003eMounting hardware and battery connection cables\u003c\/li\u003e\n\u003cli\u003eRetail packaging with installation documentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe shunt goes on the negative terminal only, with negative loads and charge sources connected to its load side; wiring it incorrectly gives inaccurate readings. Systems above 48V are not supported. A qualified electrician or MCS-accredited installer is recommended for larger or commercial off-grid setups.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061013049632,"sku":"BAM010702000R","price":98.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam010702000r-1.webp?v=1785508966"},{"product_id":"bmv-700-battery-monitor-victron","title":"Victron BMV-700 Battery Monitor 12V\/24V\/48V | BAM010700000","description":"\u003cp\u003eThe Victron BMV-700 is a battery monitor for 12V, 24V and 48V systems that tracks state of charge, voltage, current and consumed amp-hours in real time. Rather than relying on a voltage reading alone, it measures current through a precision shunt to give an accurate picture of what a battery bank is actually doing.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBacklit LCD shows state of charge, voltage, current, power, consumed amp-hours and time remaining\u003c\/li\u003e\n\u003cli\u003eWorks with 12V, 24V and 48V systems, including lead-acid (flooded, AGM, gel) and lithium batteries\u003c\/li\u003e\n\u003cli\u003eSupplied with a 500A\/50mV shunt for coulomb-counting accuracy\u003c\/li\u003e\n\u003cli\u003eProgrammable relay output for alarms or load control based on user-set thresholds\u003c\/li\u003e\n\u003cli\u003eLogs historical data: deepest discharge, average discharge, charge cycles and total amp-hours\u003c\/li\u003e\n\u003cli\u003e52mm panel cut-out for mounting in switchboards, caravans, boats and off-grid enclosures\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eCurrent flowing in and out of the battery bank is measured through the shunt, fitted in the negative cable. Integrating this current over time gives a consumed amp-hour figure and a state of charge reading that is more dependable than voltage alone, since voltage shifts with load, temperature and recent charging.\u003c\/p\u003e\u003cp\u003eThe display connects to the shunt with the supplied RJ12 cable and draws power directly from the battery, so no separate supply is needed. The relay can be set to switch on state of charge, voltage or temperature (with an optional sensor), useful for load shedding, generator start signals or alarms.\u003c\/p\u003e\u003ch3\u003eConnectivity\u003c\/h3\u003e\u003cp\u003eBluetooth is not built in. The VE.Direct port allows an optional VE.Direct Bluetooth dongle for wireless monitoring in VictronConnect, or connection to a GX device such as a Cerbo GX for remote monitoring via VRM.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar systems, marine and narrowboat installations, motorhome and caravan leisure batteries, backup power systems and remote site installations where accurate battery state of charge matters.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061015343392,"sku":"BAM010700000","price":80.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam010700000-1.webp?v=1785509302"},{"product_id":"victron-bmv-712-black-battery-monitor","title":"Victron BMV-712 Black Smart Battery Monitor Retail Pack | BAM030712200R","description":"\u003cp\u003eThe Victron BMV-712 Black Smart is a battery monitor built for solar, off-grid and marine systems. It tracks state of charge, voltage, current, power and consumed amp-hours, then sends that data over built-in Bluetooth to the VictronConnect app. This is the black retail-packaged version, functionally identical to the standard silver BMV-712 Smart.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth connectivity\u003c\/strong\u003e, built-in module links directly to VictronConnect on iOS and Android, no dongle needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitored parameters\u003c\/strong\u003e, state of charge (%), voltage, current (amps), power (watts) and consumed amp-hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond voltage input\u003c\/strong\u003e, tracks a starter battery or solar panel voltage alongside the main bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable relay\u003c\/strong\u003e, triggers on state of charge, voltage or temperature thresholds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacklit display\u003c\/strong\u003e, high-contrast LCD shows all key readings on the unit itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry support\u003c\/strong\u003e, works with lead-acid (AGM, gel, flooded) and lithium (LiFePO4) batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the victron bmv-712 smart battery monitor works\u003c\/h2\u003e\u003cp\u003eA precision shunt measures all current flowing in and out of the battery bank. From this the BMV-712 calculates state of charge using a Peukert-corrected algorithm that accounts for charge efficiency and self-discharge, giving a more reliable capacity picture than voltage alone, particularly useful on lithium banks where voltage stays flat across most of the charge range.\u003c\/p\u003e\u003cp\u003eVictronConnect shows live data plus history such as deepest discharge, average discharge and charge cycle count. The unit can also connect to a GX device, such as a Cerbo GX, for system-level monitoring and remote access through VRM.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems needing accurate state of charge readings.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat setups monitoring both house bank and starter battery.\u003c\/li\u003e\n\u003cli\u003eMotorhome and campervan leisure battery systems.\u003c\/li\u003e\n\u003cli\u003eBackup power and UPS systems on lead-acid or lithium banks.\u003c\/li\u003e\n\u003cli\u003eOff-grid installations integrated with Victron GX monitoring equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-712 Black Smart display unit\u003c\/li\u003e\n\u003cli\u003e500A\/50mV precision shunt\u003c\/li\u003e\n\u003cli\u003e10-metre RJ12 cable (shunt to display)\u003c\/li\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eFused battery cable\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe shunt fits on the negative side of the battery bank, with all negative loads and charge sources wired to the load side of the shunt. Wiring it the wrong way round gives inaccurate readings. The unit itself is low voltage and does not need specialist certification, though for grid-connected or high-voltage battery installations use a qualified electrician. Set the correct battery chemistry and capacity in VictronConnect before commissioning.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066101024,"sku":"BAM030712200R","price":101.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam030712200r-1.webp?v=1785510704"},{"product_id":"victron-smartshunt-1000a-50mv-ip65-battery-monitor","title":"Victron SmartShunt 1000A\/50mV IP65 Battery Monitor | SHU065210050","description":"\u003cp\u003eThe Victron SmartShunt 1000A\/50mV IP65 is a standalone battery monitor with the monitoring electronics built into the shunt itself, so no separate display is needed. It tracks current, voltage, power, state of charge and time to go, and connects to the VictronConnect app over Bluetooth for setup and monitoring. The IP65 enclosure suits damp or dusty locations.\u003c\/p\u003e\u003ch2\u003eKey features of this smart shunt battery monitor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 1000A continuous, measured with a 50mV shunt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 rated, protected against dust and low-pressure water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, Bluetooth via VictronConnect (iOS and Android), plus a VE.Direct port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, state of charge, voltage, current, power and time remaining, all on one device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHistory logging\u003c\/strong\u003e, deepest discharge, average discharge, charge cycles and cumulative energy throughput.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, works with lithium, AGM, gel and flooded lead-acid chemistries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eConfiguration is done entirely through VictronConnect, where battery capacity, charge efficiency, Peukert exponent and charge floor are set to match the battery bank. Once set up, the SmartShunt runs on its own and keeps logging data regardless of whether a phone is connected.\u003c\/p\u003e\u003cp\u003eThe 1000A rating suits larger systems: high-capacity lithium banks, batteries wired in parallel, or setups with heavy DC loads from inverters, bow thrusters or electric drives. The VE.Direct port lets it feed data straight into a Victron Cerbo GX or other GX device for VRM monitoring.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar systems, marine installations such as narrowboats and yachts, motorhome and caravan leisure battery setups, commercial vehicle auxiliary power, and industrial or telecoms battery backup in partially exposed environments.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThe SmartShunt fits into the negative battery lead, between the battery negative terminal and every other negative connection in the system. Incorrect wiring gives inaccurate readings, and all charge sources (shore power, generator, solar controller) need to be wired through it for accurate current measurement. Installation in 12V, 24V or 48V DC systems should be carried out by a competent installer, and marine fitters should check relevant NMEA or RCD Directive requirements.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x Victron SmartShunt 1000A\/50mV IP65\u003c\/li\u003e\n\u003cli\u003eVE.Direct cable (check packaging for included accessories)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066625312,"sku":"SHU065210050","price":125.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu065210050-1.webp?v=1785510793"},{"product_id":"battery-monitor-bmv-702-shunt","title":"Victron BMV-702 Battery Monitor 500A Shunt Black | BAM010702200","description":"\u003cp\u003eThe Victron BMV-702 is a battery monitor for 12V, 24V and 48V systems, giving a live readout of state of charge, voltage, current, consumed amp-hours, power and time remaining. It suits off-grid solar, marine, motorhome and backup power setups where knowing exactly how much charge is left matters.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDisplays state of charge (%), voltage, current, consumed amp-hours, power (W) and time remaining\u003c\/li\u003e\n\u003cli\u003eWorks with 12V, 24V and 48V systems, covering lead-acid (AGM, gel, flooded) and lithium batteries\u003c\/li\u003e\n\u003cli\u003eIncludes a 500A\/50mV shunt with 10mA resolution for accurate low-current readings\u003c\/li\u003e\n\u003cli\u003eSecond voltage input for monitoring a starter battery or bank mid-point, no extra shunt needed\u003c\/li\u003e\n\u003cli\u003eProgrammable relay for alarms or automatic load disconnect on configurable thresholds\u003c\/li\u003e\n\u003cli\u003eBacklit display with button navigation; no app required for everyday use\u003c\/li\u003e\n\u003cli\u003eVE.Direct port for connection to Victron GX devices and MPPT charge controllers\u003c\/li\u003e\n\u003cli\u003eBluetooth monitoring available via the optional VE.Direct Bluetooth Smart dongle and Victron Connect app\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSetup and accuracy\u003c\/h2\u003e\u003cp\u003eGetting an accurate state of charge reading depends on setting the battery capacity and charge efficiency correctly. The BMV-702 lets you adjust these, including the Peukert exponent and charge efficiency factor, so the numbers stay meaningful whatever chemistry you're running. The shunt goes on the negative conductor, with all loads and charge sources wired to its load side; get that wrong and the readings won't mean much.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits off-grid solar arrays, yachts with separate house and starter banks, motorhomes and campervans, backup power systems, and 48V telecom or remote site installations. On a Victron system with a Cerbo GX or Venus GX, its data sits alongside solar yield and inverter status on the same overview screen.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-702 display unit (black)\u003c\/li\u003e\n\u003cli\u003e500A\/50mV shunt\u003c\/li\u003e\n\u003cli\u003e10-metre RJ12 cable connecting display to shunt\u003c\/li\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066887456,"sku":"BAM010702200","price":100.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam010702200-1.webp?v=1785510840"},{"product_id":"victron-bmv-shunt-pcba-replacement","title":"Victron PCBA for Shunt BMV 602S\/700\/702\/712 | SPR00053","description":"\u003cp\u003eThis is the OEM replacement printed circuit board assembly (PCBA) for the shunt unit fitted inside the Victron BMV 602S, BMV 700, BMV 702 and BMV 712 battery monitors. It is a direct spare part for repairing a faulty shunt board rather than replacing the whole monitor.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, fits the shunt unit on BMV 602S, BMV 700, BMV 702 and BMV 712 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent type\u003c\/strong\u003e, printed circuit board assembly (PCBA), the board that handles signal processing between the shunt resistor and the display head unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.012 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e, SPR00053.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN\u003c\/strong\u003e, 8719076031710.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFitted when a shunt unit has failed due to an electrical fault, overvoltage event or moisture ingress. It is a common part for solar installers and service engineers holding spares for Victron BMV monitor maintenance, and for workshop repair of returned shunt units. The board matches the original specification, so no changes to the shunt housing or wiring harness are needed.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x PCBA for BMV 602S \/ 700 \/ 702 \/ 712 shunt unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by someone familiar with Victron BMV hardware. The shunt sits in the battery's negative circuit, so isolate the battery safely before starting any repair. Check the model number on your existing BMV display or shunt housing before ordering, since this board is specific to the four models listed above.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095393497376,"sku":"SPR00053","price":12.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-spr00053-1.webp?v=1785748261"},{"product_id":"victron-bmv-702-500a-monitor","title":"Victron BMV-702 Battery Monitor with 500A Shunt | BAM010702000","description":"\u003cp\u003eThe Victron BMV-702 is a battery monitor for 12V, 24V and 48V systems that reports state of charge, voltage, current and consumed amp hours in real time. It works by measuring current through a precision shunt and integrating that reading over time, which gives a far more accurate state of charge figure than voltage-based estimation methods.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eState of charge\u003c\/strong\u003e, continuously updated percentage based on measured current flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-parameter monitoring\u003c\/strong\u003e, voltage, current draw and consumed amp hours tracked simultaneously\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, works with 12V, 24V and 48V battery banks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable relay\u003c\/strong\u003e, set for high\/low voltage alarms or SOC thresholds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacklit display\u003c\/strong\u003e, readable in low-light conditions such as boat cabins or van interiors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth ready\u003c\/strong\u003e, connects to the VictronConnect app via an optional Bluetooth dongle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the victron battery monitor works\u003c\/h2\u003e\u003cp\u003eThe BMV-702 uses its included shunt to measure current in and out of the battery bank, then calculates consumed amp hours and derives SOC from that data. The programmable relay can trigger an alarm or disconnect a load at a set SOC or voltage point, helping to avoid deep discharge. It also logs charge cycles, deepest discharge and average discharge for diagnostic purposes. A second voltage input lets you monitor a starter or auxiliary battery alongside the main bank, which suits marine and vehicle setups with two battery groups.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar battery systems\u003c\/li\u003e\n\u003cli\u003eMarine installations with single or dual battery banks\u003c\/li\u003e\n\u003cli\u003eMotorhome and campervan leisure batteries\u003c\/li\u003e\n\u003cli\u003eTelecoms and remote power systems\u003c\/li\u003e\n\u003cli\u003eIndustrial backup power with 12V, 24V or 48V banks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-702 display unit\u003c\/li\u003e\n\u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n\u003cli\u003e10 metre connection cable between shunt and display\u003c\/li\u003e\n\u003cli\u003eMounting hardware and installation accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe shunt fits on the negative conductor, with all negative loads and charge sources wired to its load side. Installation should be done by a qualified electrician, and the unit is not intended for grid-connected metering.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095399526688,"sku":"BAM010702000","price":97.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam010702000-1.webp?v=1785749002"},{"product_id":"victron-smartshunt-2000a-ip65-monitor","title":"Victron SmartShunt 2000A\/50mV IP65 Battery Monitor | SHU065220050","description":"\u003cp\u003eThe Victron SmartShunt 2000A\/50mV IP65 is a standalone battery monitor built for high-current systems where accurate state-of-charge tracking matters. It connects to the Victron Connect app over Bluetooth, so off-grid setups, large battery banks and commercial installations can track their batteries without a separate display unit.\u003c\/p\u003e\u003ch2\u003eKey features of the smart shunt battery monitor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 2000A continuous with a 50mV shunt drop, suited to large battery banks and high-draw systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 rated, protecting against dust ingress and low-pressure water jets for exposed or outdoor-adjacent installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, built-in Bluetooth with full monitoring and configuration through the Victron Connect app on iOS and Android.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, state of charge, voltage, current, power, consumed amp-hours and time remaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, lead-acid types (AGM, gel, flooded) and lithium (LiFePO4).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration\u003c\/strong\u003e, VE.Direct port for connection to GX devices, MPPT solar chargers and Venus OS installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe SmartShunt measures the voltage drop across a precision shunt resistor to calculate current flow. At 2000A it covers systems well beyond residential scale: large off-grid installations, marine vessels with high electrical loads, and commercial battery storage setups. The 50mV shunt drop is a standard value balancing measurement accuracy against power dissipation at high currents.\u003c\/p\u003e\u003cp\u003eThe IP65 rating sets this model apart from the standard SmartShunt range, allowing installation in engine rooms, poorly ventilated battery compartments or outdoor enclosures where dust and occasional water spray are a factor.\u003c\/p\u003e\u003cp\u003eConnected to a Cerbo GX or other GX device via VE.Direct, the SmartShunt feeds battery data into the Venus OS dashboard and can be monitored remotely through the VRM portal, making it a data source for larger multi-device installations rather than just a standalone instrument.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to large off-grid solar installations, marine and narrowboat electrical systems with high continuous current demands, commercial battery storage integrated with GX devices and VRM, motorhome and coach conversions with large battery banks, and installations in damp or dusty environments specifying an IP65 component.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFit the SmartShunt in the negative battery cable, between the battery negative terminal and all other negative connections. Incorrect wiring produces inaccurate readings. At 2000A, cabling, fusing and busbar connections must be rated for the system's maximum current, so installation should be carried out by a qualified electrician or experienced high-current DC system integrator. Check relevant safety and compliance requirements before commissioning, especially where lithium batteries or grid-connected elements are involved.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron SmartShunt 2000A\/50mV IP65 unit\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095573590304,"sku":"SHU065220050","price":181.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu065220050-1.webp?v=1785753913"},{"product_id":"bmv-710h-battery-monitor-400v-dc","title":"Victron BMV-710H Smart Battery Monitor 400V DC | BAM030710100","description":"\u003cp\u003eThe Victron BMV-710H Smart is a battery monitor built for higher-voltage systems, measuring battery voltage up to 400V DC. It suits professional installers and off-grid system designers working with series-connected battery banks, including lithium and lead-acid configurations, where standard monitors run out of range.\u003c\/p\u003e\u003ch2\u003eVictron battery monitor with high-voltage shunt\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage range\u003c\/strong\u003e, measures up to 400V DC, beyond the range of standard BMV monitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReadings\u003c\/strong\u003e, state of charge, voltage, current, power, consumed amp-hours and time remaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, built-in Bluetooth via the VictronConnect app, plus VE.Direct for GX device integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay output\u003c\/strong\u003e, programmable for alarms, load control or generator start.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShunt\u003c\/strong\u003e, 500A \/ 50mV shunt included as standard; compatible with external shunts for higher currents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e, backlit, with navigation across all monitored parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis is the high-voltage variant of Victron's BMV-710 Smart. The standard 710 is rated to 95V; the 710H extends that to 400V DC, which matters for series-connected battery banks or high-voltage DC bus systems in larger off-grid installations, industrial backup power and some marine or EV applications above 48V.\u003c\/p\u003e\u003cp\u003eState of charge accuracy depends on precise current measurement over time. The 500A shunt feeds a high-resolution current measurement circuit that calculates consumed amp-hours continuously. Both the Peukert exponent and charge efficiency factor are configurable, so the monitor can be tuned to flooded lead-acid, AGM, gel or lithium chemistry. Bluetooth is built in rather than added by a dongle, giving full access to settings and logs through VictronConnect without a separate GX device. Where a Cerbo GX or similar is present, the BMV-710H also communicates over VE.Direct.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits high-voltage off-grid banks where series-connected cells exceed 48V or 96V, industrial and commercial backup systems with high-voltage DC bus configurations, and marine installations with elevated string voltages. Also used for amp-hour and state of charge tracking on lithium systems needing Peukert compensation, and in systems tied into a Victron GX device.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-710H Smart battery monitor unit with display\u003c\/li\u003e\n\u003cli\u003e500A \/ 50mV shunt\u003c\/li\u003e\n\u003cli\u003eConnection cables and hardware\u003c\/li\u003e\n\u003cli\u003eVE.Direct cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis monitor operates at voltages up to 400V DC, which carries a real risk of electric shock and arc flash. Installation should be carried out by a qualified electrician or experienced off-grid installer. The shunt goes on the negative battery terminal, with all loads and chargers on the load side of it. De-energise the system fully before making connections, and check UK wiring regulations and your DNO where relevant.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095610585376,"sku":"BAM030710100","price":455.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam030710100-1.webp?v=1785755892"},{"product_id":"victron-bmv-700h-high-voltage-monitor","title":"Victron BMV-700H High Voltage Battery Monitor 60-385VDC | BAM010700100","description":"\u003cp\u003eThe Victron Energy BMV-700H is a high precision battery monitor built for high voltage battery systems operating between 60 and 385 VDC. It measures voltage, current, power, consumed ampere hours and state of charge, giving accurate real time data on battery condition and remaining runtime. It comes complete with a 500A\/50mV shunt housed in a dedicated high voltage enclosure, connection cabling and mounting hardware, ready to install without additional components.\u003c\/p\u003e\u003ch2\u003eVictron battery monitor for high voltage systems\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage range\u003c\/strong\u003e, designed for battery banks from 60 to 385 VDC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReadings\u003c\/strong\u003e, displays voltage, current, power, ampere hours consumed and state of charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuntime estimate\u003c\/strong\u003e, calculates remaining time at the current rate of discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarms and relay\u003c\/strong\u003e, programmable visual and audible alarm, plus a programmable relay to disconnect non critical loads or start a generator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShunt\u003c\/strong\u003e, 500A quick connect shunt supplied in a purpose built high voltage enclosure, with shunt selection capability up to 10,000A for larger installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e, current measurement resolution of 10 mA (0.01A).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe monitor tracks state of charge by integrating current flow through a precision shunt, applying Peukert compensation and charge efficiency factors so readings reflect real battery behaviour under load. That matters where deep discharge shortens battery life and replacement is costly.\u003c\/p\u003e\u003ch3\u003eThe H designation\u003c\/h3\u003e\u003cp\u003eThe H identifies this as the high voltage member of the BMV-700 family, distinct from the standard BMV-700 used on conventional 12V, 24V and 48V systems. It suits traction battery packs, high voltage industrial banks and similar systems working well above standard low voltage DC. The supplied shunt sits in an enclosure built for that higher working voltage.\u003c\/p\u003e\u003ch2\u003eInstallation and connectivity\u003c\/h2\u003e\u003cp\u003eAll connections are made to the quick connect PCB on the current shunt, which links to the display head with a standard RJ12 cable. The supplied 10 metre RJ12 cable and 2 metre fused battery cable are all that is needed. Round and square front bezels are included along with a rear mounting ring and front mounting screws. A VE.Direct port lets the BMV-700H pass live data to a Victron GX device, putting the battery bank data on the VRM online portal for remote monitoring.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMV-700H display head\u003c\/li\u003e\n\u003cli\u003e500A\/50mV shunt in high voltage enclosure\u003c\/li\u003e\n\u003cli\u003e10 m RJ12 cable\u003c\/li\u003e\n\u003cli\u003e2 m fused battery cable\u003c\/li\u003e\n\u003cli\u003eRound and square front bezels, mounting ring and screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095616516384,"sku":"BAM010700100","price":410.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bam010700100-1.webp?v=1785756487"},{"product_id":"victron-smartshunt-battery-monitor-shu050150150","title":"Victron SmartShunt 500A Battery Monitor | SHU050150150","description":"\u003cp\u003eThe Victron SmartShunt 500A is a standalone battery shunt monitor that tracks state of charge, consumed amp-hours, voltage, current and power without needing a separate display unit. It connects to the VictronConnect app via Bluetooth, so there's no display head to fit or wire in. Built for 12V, 24V and 48V battery systems, it suits off-grid, marine and vehicle installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, state of charge, consumed amp-hours, voltage, current and power in real time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, built-in Bluetooth to the VictronConnect app on iOS and Android, no extra hardware required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent rating\u003c\/strong\u003e, 500A continuous with a 50mV shunt for measurement accuracy across the load range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, 12V, 24V and 48V systems, including lithium, AGM, gel and flooded lead-acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData output\u003c\/strong\u003e, VE.Direct for connection to Victron GX devices, MPPT controllers and other compatible equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e, battery capacity, Peukert exponent, charge efficiency factor and tail current all set via VictronConnect\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe SmartShunt puts the monitoring intelligence inside the shunt body itself, removing the need for a separate BMV display head or the cable routing that goes with it. All readings and history, including deepest discharge, cycle count and time since last full charge, are viewed through VictronConnect.\u003c\/p\u003e\u003cp\u003eThe 500A rating and 50mV shunt drop match Victron's BMV series, so accuracy holds across both high-current discharge and light standby loads. Correct state-of-charge tracking relies on the battery parameters being set up properly in the app. A VE.Direct port lets the SmartShunt feed a Victron Cerbo GX or Venus GX for centralised monitoring.\u003c\/p\u003e\u003cp\u003eWhere a local display is wanted, the SmartShunt works with an optional Victron GX Touch or a connected GX device screen. It is not compatible with the BMV-700 or BMV-712 display heads. Power is drawn from the battery being monitored, with minimal standby draw.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar battery systems, marine and narrowboat installs where display space is tight, motorhome and campervan leisure battery banks, Victron GX system builds, retrofit monitoring where new display cabling isn't practical, and light commercial battery systems up to 500A continuous.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVictron SmartShunt 500A unit\u003c\/li\u003e\n\u003cli\u003eConnection cable for battery negative and sense wiring\u003c\/li\u003e\n\u003cli\u003eDocumentation and quick-start guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe SmartShunt fits in the negative battery line, between the battery negative terminal and every other negative connection in the system. All negative loads and charge sources must return through the shunt for accurate readings; wiring it incorrectly gives inaccurate state-of-charge data. Fitting should be done by a qualified electrician or experienced installer, and by an MCS-accredited installer where it forms part of a solar PV system.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52214323183904,"sku":"SHU050150150","price":78.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-shu050150150-1.webp?v=1787236687"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/victron-smartshunt-battery-monitors.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}