{"title":"Victron Batteries","description":"\u003cp\u003eVictron lithium and lead-acid batteries are designed to work directly with the Victron inverter and charger ecosystem. The Lithium SuperPack range offers drop-in replacement compatibility with existing lead-acid battery positions, while Smart Lithium batteries with an integrated BMS communicate directly with MultiPlus inverter chargers to manage charge and discharge safely.\u003c\/p\u003e\u003cp\u003eAGM and gel options remain available for systems where lithium is not required or not specified. Also stocked are the VE.Bus BMS V2 and smallBMS units, used to manage battery protection and integration across a Victron system.\u003c\/p\u003e\u003cp\u003eAll Victron batteries carry a minimum two-year warranty and are tested to work within Victron system parameters, making them a straightforward match for existing Victron installations.\u003c\/p\u003e","products":[{"product_id":"victron-peak-power-pack-256wh","title":"Victron Peak Power Pack 12.8V 20Ah 256Wh LiFePO4 Battery | PPP012020000","description":"\u003cp\u003eThe Victron Peak Power Pack is a self-contained 12.8V lithium iron phosphate (LiFePO4) battery rated at 20Ah, giving 256Wh of usable energy. It ships with a built-in battery management system, so no separate BMS or protection board is needed for portable or small off-grid setups.\u003c\/p\u003e\u003ch2\u003eKey features of this LiFePO4 battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12.8V nominal, 20Ah, 256Wh of usable energy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, Lithium Iron Phosphate (LiFePO4) cells with a stable discharge curve and low self-discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated BMS\u003c\/strong\u003e, manages cell balancing, over-charge, over-discharge and short-circuit protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 3.96kg, compact enough for mobile installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use\u003c\/strong\u003e, no external BMS or additional management hardware required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharger compatibility\u003c\/strong\u003e, works with Victron chargers and charge controllers set to a lithium battery profile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eRunning at 12.8V nominal rather than the 13.2V of some other lithium chemistries, this pack sits closer to a drop-in replacement for 12V lead-acid systems, though the charge profile still needs to be set for lithium. The integrated BMS keeps the unit self-contained, and deep discharge is tolerated far better than with lead-acid, so the rated 256Wh is genuinely usable. Cycle life is also higher than sealed lead-acid, which cuts down on replacements over time.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe Peak Power Pack suits portable power stations and field equipment, auxiliary power for campervans, caravans and narrowboats, small off-grid lighting or monitoring systems, backup power for low-draw 12V devices and instrumentation, and marine auxiliary use where weight and space are limited.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eSet any charger or solar charge controller to a lithium (LiFePO4) profile before connecting; lead-acid charge parameters are not suitable. On vessels or vehicles forming part of a larger electrical system, connection should be handled by a qualified electrician familiar with lithium battery installations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron Peak Power Pack 12.8V \/ 20Ah (256Wh)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053853143328,"sku":"PPP012020000","price":313.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ppp012020000-1.webp?v=1785420416"},{"product_id":"lifepo4-battery-12v-100ah-smart","title":"Victron LiFePO4 Battery 12.8V 100Ah Smart | BAT512110610","description":"\u003cp\u003eThe Victron LiFePO4 battery combines lithium iron phosphate chemistry with an integrated Bluetooth module, built for solar storage, off-grid systems, marine and vehicle use. Rated at 12.8V nominal with 100Ah capacity, it delivers 1.28kWh of usable energy from a single unit.\u003c\/p\u003e\u003ch2\u003eKey features of this Victron LiFePO4 battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e - Lithium iron phosphate (LiFePO4), offering a stable cell with longer cycle life than lead-acid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e - Integrated Bluetooth links directly to the VictronConnect app for state of charge, voltage, current and temperature monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e - 12.8V nominal, 100Ah, 1.28kWh usable energy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e - Built-in BMS guards against over-charge, over-discharge, over-temperature and short circuit conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e - 14.01kg, lighter than an equivalent lead-acid battery of the same capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration\u003c\/strong\u003e - Works with Victron charge controllers and inverter\/chargers via VE.Bus and VE.Direct, and can be wired in series or parallel with other units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar storage in residential, agricultural and remote sites, marine house battery banks, motorhome and campervan leisure systems, and backup power for telecoms and security equipment. It also works well in mobile power setups and as an addition to existing Victron-based battery banks.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit by a qualified electrician or system integrator familiar with lithium battery systems. Set the charge source to a LiFePO4 charge profile before connecting, and do not mix chemistries in the same bank. When wiring units in series for 24V or 48V systems, check that the BMS and charge sources are rated for the resulting voltage.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron LiFePO4 12.8V 100Ah Smart battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060308537632,"sku":"BAT512110610","price":539.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat512110610-1.webp?v=1785487507"},{"product_id":"victron-lifepo4-smart-battery-200ah","title":"Victron LiFePO4 Battery 25.6V 200Ah Smart | BAT524120610","description":"\u003cp\u003eThe Victron LiFePO4 battery rated at 25.6V and 200Ah brings 5.12kWh of usable energy to a single case, with Bluetooth built in for direct monitoring through the VictronConnect app. It is aimed at installers building 24V banks for off-grid, marine or mobile systems, where cycle life and remote visibility of the pack matter.\u003c\/p\u003e\u003ch2\u003eVictron LiFePO4 battery features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, 25.6V nominal lithium iron phosphate (LiFePO4).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 200Ah, giving 5.12kWh per unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, integrated Bluetooth with the VictronConnect app for state of charge, voltage, current and temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, built-in BMS with cell balancing plus over-voltage, under-voltage, over-current and over-temperature protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetworking\u003c\/strong\u003e, VE.Smart compatible, sharing data with Victron MPPT charge controllers and MultiPlus or Quattro inverter\/chargers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 37.5kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBank configurations\u003c\/h2\u003e\u003cp\u003eUnits can be connected in parallel to add capacity at 24V, or paired in series to build a 51.2V bank for 48V systems. Series wiring calls for careful attention to balancing, and Victron's published guidance on maximum parallel and series counts should be checked before sizing a bank.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar storage paired with a Victron MultiPlus or Quattro at 24V.\u003c\/li\u003e\n\u003cli\u003eMarine house banks where thermal stability and lower weight than lead-acid are wanted.\u003c\/li\u003e\n\u003cli\u003eMotorhome and campervan leisure battery installations needing deep-cycle performance with app monitoring.\u003c\/li\u003e\n\u003cli\u003eVehicle-based power systems where space and weight rule out AGM.\u003c\/li\u003e\n\u003cli\u003eParallel banks for cabins, lodges or remote telecoms sites.\u003c\/li\u003e\n\u003cli\u003e48V builds using two units in series with compatible Victron 48V gear.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060309553440,"sku":"BAT524120610","price":1407.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat524120610-1.webp?v=1785487620"},{"product_id":"victron-lifepo4-battery-200ah-smart","title":"Victron LiFePO4 Battery 12.8V 200Ah Smart | BAT512120610","description":"\u003cp\u003eThe Victron LiFePO4 Battery 12.8V 200Ah Smart is a lithium iron phosphate drop-in battery for solar, off-grid, marine and vehicle systems. It offers 200Ah of capacity at 12.8V nominal voltage, giving 2.56kWh of stored energy per unit, and includes an integrated Bluetooth module for monitoring via the Victron Connect app.\u003c\/p\u003e\u003ch2\u003eKey features of this victron lifepo4 battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12.8V nominal with 200Ah, equal to 2.56kWh of stored energy per unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, Lithium Iron Phosphate (LiFePO4) cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth monitoring\u003c\/strong\u003e, integrated Bluetooth module works with the Victron Connect app for state of charge, voltage, current and temperature data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in BMS\u003c\/strong\u003e, manages cell balancing along with over-charge, over-discharge, short circuit and over-temperature protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 19.5kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBank building\u003c\/strong\u003e, designed for series and parallel connection to build larger battery banks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe onboard BMS handles cell-level protection on its own and can communicate with compatible Victron chargers and inverter-chargers over VE.Bus or VE.Direct, allowing coordinated charge management across a system. The Smart designation refers to the built-in Bluetooth interface, which lets an installer or owner read live data and review logs through the Victron Connect app without wiring in a separate display or shunt. That is useful during commissioning, and for checking on marine or vehicle installations where the battery itself is hard to reach.\u003c\/p\u003e\u003cp\u003eWhen wiring several units together in series or parallel, Victron's published guidance on battery bank configuration should be followed so charging stays balanced and the BMS operates correctly.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar storage systems.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat house battery banks.\u003c\/li\u003e\n\u003cli\u003eMotorhome, campervan and vehicle leisure battery installations.\u003c\/li\u003e\n\u003cli\u003eBackup power for telecoms, security and other critical equipment.\u003c\/li\u003e\n\u003cli\u003eExpanding existing Victron 12V battery banks in parallel.\u003c\/li\u003e\n\u003cli\u003eMobile and portable power stations needing a 12V lithium source.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron LiFePO4 Battery 12.8V 200Ah Smart (BAT512120610)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit this battery with a qualified electrician or an installer experienced with lithium systems. The internal BMS protects at cell level, but correct fusing, cabling and charge source setup remain the installer's responsibility. Any connected charger, solar charge controller or inverter-charger needs to be set to a lithium profile suited to 12.8V LiFePO4 chemistry.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060311978272,"sku":"BAT512120610","price":859.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat512120610-1.webp?v=1785488022"},{"product_id":"victron-smallbms-lifepo4-battery-management","title":"Victron smallBMS for LiFePO4 Battery Systems | BMS400100000","description":"\u003cp\u003eThe Victron Energy smallBMS is a compact battery management system built for Victron LiFePO4 lithium batteries. It protects against over-charge, over-discharge and excessive discharge current, which suits small off-grid systems, marine installs and mobile setups where space and weight matter.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, over-charge and over-discharge protection for Victron LiFePO4 lithium batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad disconnect output\u003c\/strong\u003e, signals connected devices to cut the load before cell damage occurs at low state of charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge disconnect output\u003c\/strong\u003e, signals chargers to stop once the battery is fully charged, preventing over-voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 80 g, suited to space-constrained installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, simple interface, less complex to install than a full-featured BMS.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe smallBMS monitors cell voltages in a Victron LiFePO4 battery and acts through two outputs, load disconnect and charge disconnect. It is intended for smaller systems that don't need a full BMS with CAN-bus communication. It works alongside Victron components such as BatteryProtect and compatible MPPT solar charge controllers. It does not provide active cell balancing or communication to a GX device, so check compatibility with your specific battery model before installing.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall off-grid solar systems using Victron lithium batteries.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat 12V or 24V lithium battery installations.\u003c\/li\u003e\n\u003cli\u003eCampervans, motorhomes and other mobile power setups.\u003c\/li\u003e\n\u003cli\u003ePortable power stations and lightweight energy storage builds.\u003c\/li\u003e\n\u003cli\u003eBackup power systems needing a compact BMS solution.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eUse the smallBMS only with compatible Victron LiFePO4 batteries. It is not suitable for lead-acid, AGM or gel chemistries. Wiring should be done by a qualified electrician familiar with lithium battery systems, since incorrect wiring of the disconnect outputs can damage the battery or cause system failure. Refer to Victron's wiring schematics for your specific battery and system before commissioning.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy smallBMS (BMS400100000)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060526313760,"sku":"BMS400100000","price":38.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bms400100000-1.webp?v=1785492564"},{"product_id":"victron-vebus-bms-v2-lifepo4","title":"Victron VE.Bus BMS V2 for LiFePO4 Smart Batteries | BMS300200200","description":"\u003cp\u003eThe Victron VE.Bus BMS V2 is a battery management system for use with Victron LiFePO4 smart batteries. It monitors and protects the battery bank by controlling charge and discharge through the VE.Bus interface, and is intended for professional installation in off-grid, marine and vehicle power systems.\u003c\/p\u003e\u003ch2\u003eKey features of the Victron VE.Bus BMS\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Bus interface\u003c\/strong\u003e, connects directly to Victron LiFePO4 smart batteries for cell-level monitoring and protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge control\u003c\/strong\u003e, controls connected Victron inverters, inverter\/chargers and solar chargers to prevent overcharge and over-discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV2 revision\u003c\/strong\u003e, improved compatibility and functionality over the original VE.Bus BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-alarm output\u003c\/strong\u003e, signals the system before a hard battery disconnect occurs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.18 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration\u003c\/strong\u003e, works with Victron GX devices for monitoring and control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe unit reads cell voltage and temperature data directly from the batteries and uses this to instruct connected inverter\/chargers and MPPT solar chargers to adjust or stop charging and discharging. This protects battery cells from conditions that reduce cycle life or cause permanent damage. The V2 revision is the current recommended unit for new installations and supports the pre-alarm function, giving the system time for a controlled shutdown before a hard disconnect. It communicates with GX devices such as the Cerbo GX for system visibility through the VRM portal or a local display. It must be used as part of a correctly specified Victron system with compatible LiFePO4 smart batteries, not as a standalone unit.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems with Victron LiFePO4 smart batteries and MultiPlus or Quattro inverter\/chargers.\u003c\/li\u003e\n\u003cli\u003eMarine electrical systems needing cell-level protection and controlled shutdown behaviour.\u003c\/li\u003e\n\u003cli\u003eVehicle and motorhome installations with Victron lithium battery banks.\u003c\/li\u003e\n\u003cli\u003eBackup power systems where battery protection is a requirement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron VE.Bus BMS V2 unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or experienced Victron installer. The unit is designed exclusively for Victron LiFePO4 smart batteries and is not compatible with other battery chemistries or third-party batteries. Correct wiring of the pre-alarm and load disconnect outputs is essential for safe operation under fault conditions. Check the Victron system design guidelines to confirm compatibility with your inverter\/charger and solar charger models before fitting.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060528181536,"sku":"BMS300200200","price":116.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bms300200200-1.webp?v=1785492772"},{"product_id":"victron-lifepo4-battery-300ah-ng","title":"Victron LiFePO4 Battery 25.6V 300Ah NG | BAT524130620","description":"\u003cp\u003eThe Victron LiFePO4 25.6V 300Ah NG is a lithium iron phosphate battery from Victron's NG (New Generation) range, delivering 7.68kWh of energy from a single 25.6V unit. Built for off-grid systems, marine installs and large mobile power setups where depth of discharge and cycle life matter.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, Lithium Iron Phosphate (LiFePO4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal voltage\u003c\/strong\u003e, 25.6V, suited to 24V system architecture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 300Ah, 7.68kWh of energy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated BMS handling cell balancing, over-charge, over-discharge and short-circuit protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBank building\u003c\/strong\u003e, units can be connected in series or parallel per Victron configuration guidelines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 55kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eLiFePO4 chemistry does not undergo thermal runaway under normal fault conditions, which is why it suits enclosed spaces such as boats, vehicles and battery rooms. Its flat discharge curve keeps voltage consistent through most of the discharge cycle, helping inverter efficiency and load performance.\u003c\/p\u003e\u003cp\u003eAt 300Ah, one unit covers medium-to-large off-grid loads without the need to manage multiple parallel batteries. The BMS handles cell-level protection on its own, though any connected charger or inverter\/charger still needs its charge parameters set to the LiFePO4 profile Victron specifies. The NG designation marks this as part of Victron's updated lithium range, with improved BMS communication over earlier Victron lithium products, integrating with existing Victron monitoring and control setups.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems in cabins, remote properties and agricultural buildings on a 24V bank\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat installations\u003c\/li\u003e\n\u003cli\u003eLarge motorhome and vehicle-based 24V inverter\/charger systems\u003c\/li\u003e\n\u003cli\u003eBackup power for telecoms, industrial equipment or critical loads on 24V DC infrastructure\u003c\/li\u003e\n\u003cli\u003eExpanding an existing Victron 24V battery bank with a single high-capacity unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron LiFePO4 Battery 25.6V 300Ah NG (BAT524130620)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or accredited installer experienced with lithium battery systems. At 55kg, safe handling equipment is needed. Charge parameters on all connected chargers and inverter\/chargers must be set to Victron's LiFePO4 profile before commissioning, and this battery should not be mixed with lead-acid or other lithium chemistries in the same bank.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060749463840,"sku":"BAT524130620","price":1992.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat524130620-1.webp?v=1785502613"},{"product_id":"victron-100ah-lifepo4-battery-ng","title":"Victron LiFePO4 Battery 12.8V 100Ah NG | BAT512110620","description":"\u003cp\u003eThe Victron LiFePO4 battery 12.8V 100Ah NG is a lithium iron phosphate drop-in battery built for 12V solar, marine and off-grid systems. It replaces a conventional lead-acid battery where weight, cycle life and depth of discharge matter. The NG series has its battery management system built into the cell housing rather than fitted as a separate board.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, LiFePO4 (lithium iron phosphate), a stable cell type with no thermal runaway risk under normal operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12.8V nominal, 100Ah, giving 1.28kWh of usable energy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated BMS guards against over-charge, over-discharge, over-temperature and short circuit, no external protection board needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 9.5kg, notably lighter than an equivalent AGM or flooded lead-acid unit, which typically runs 25 to 30kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of discharge\u003c\/strong\u003e, usable DoD up to 80% without significant capacity loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem building\u003c\/strong\u003e, up to 4 units can be connected in series for 48V systems, or in parallel to add capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe battery works with Victron MPPT solar charge controllers, MultiPlus inverter\/chargers, and other Victron equipment set to a lithium charging profile. Paired with a Victron Battery Monitor or GX device, battery data is visible remotely through VRM.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to 12V solar storage in cabins and outbuildings, marine and narrowboat house banks, campervan and motorhome leisure battery replacement, portable off-grid setups, and backup power for telecoms, CCTV or remote monitoring equipment. Multiple units can form the basis of a larger 24V or 48V bank.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit by a qualified electrician or accredited installer familiar with lithium systems. Set the charge controller and inverter\/charger to a lithium-compatible charging profile before connecting; do not use an AGM or lead-acid charge profile. When linking units in series or parallel, all batteries should share the same type, age and state of charge.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron LiFePO4 Battery 12.8V 100Ah NG (BAT512110620)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060751069472,"sku":"BAT512110620","price":440.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat512110620-1.webp?v=1785503017"},{"product_id":"victron-200ah-lifepo4-battery","title":"Victron LiFePO4 Battery 25.6V 200Ah NG | BAT524120620","description":"\u003cp\u003eThe Victron LiFePO4 25.6V 200Ah NG is a lithium iron phosphate battery from Victron's New Generation range, built for off-grid, marine and backup power installations. Nominal capacity is 5.12kWh, and the unit weighs 37kg, considerably lighter than an equivalent lead-acid bank.\u003c\/p\u003e\u003ch2\u003eVictron LiFePO4 battery key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 25.6V nominal, 200Ah, 5.12kWh total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, lithium iron phosphate (LiFePO4), noted for thermal stability compared with other lithium formats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e, Victron NG (New Generation), designed for integration with current Victron inverter-chargers, MPPT controllers and BMS products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 37kg for the 200Ah unit at 25.6V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentification\u003c\/strong\u003e, SKU BAT524120620, GTIN 8719076058946.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis battery suits 24V system architectures. Two units in series form a nominal 48V (51.2V) bank; multiple units in parallel increase capacity at 24V. Typical uses include Victron MultiPlus or Quattro off-grid systems, marine and narrowboat house banks, vehicle-based 24V power systems, and backup power for telecoms, industrial or remote monitoring sites. Confirm BMS compatibility with the rest of your Victron system before specifying.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFitting must be carried out by a qualified electrician or accredited installer experienced with lithium systems. A compatible BMS is required, along with a charger or inverter-charger set to a lithium charge profile rather than lead-acid settings. Cabling should be rated for the maximum discharge current, with fusing placed as close to the battery terminal as practicable. Grid-connected installations must meet current UK wiring regulations and any applicable G98 or G99 requirements.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron LiFePO4 25.6V 200Ah NG battery (BAT524120620)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060751102240,"sku":"BAT524120620","price":1434.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat524120620-1.webp?v=1785503038"},{"product_id":"victron-lifepo4-battery-100ah-ng","title":"Victron LiFePO4 Battery 51.2V 100Ah NG | BAT548110620","description":"\u003cp\u003eThe Victron LiFePO4 Battery 51.2V 100Ah NG is a lithium iron phosphate battery for off-grid, backup and solar storage installations. Nominal energy is 5.12kWh at 51.2V nominal voltage, suiting 48V battery bank set-ups used with Victron inverter-chargers and Multi systems. This is the NG (New Generation) variant, SKU BAT548110620.\u003c\/p\u003e\u003ch2\u003eVictron LiFePO4 battery key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, Lithium Iron Phosphate (LiFePO4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal voltage\u003c\/strong\u003e, 51.2V, matching 48V system architectures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 100Ah, giving 5.12kWh nominal energy per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e, NG (New Generation), Victron's current standalone LiFePO4 line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery management\u003c\/strong\u003e, integrated BMS handles cell balancing and protection without an external unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 37kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe integrated BMS communicates with compatible Victron equipment, letting the system respond to battery state in real time. This matters in systems using a Victron MultiPlus, Quattro or other VE.Bus-compatible inverter-charger, where the BMS can signal charge current limits and disconnect commands directly to the inverter. Installers should check communication cable and protocol compatibility with the specific inverter or charge controller in use.\u003c\/p\u003e\u003cp\u003eUnits can be mounted upright and connected in parallel to increase capacity, or in series-parallel arrangements where the system design allows. Follow Victron's published wiring and fusing guidance for lithium battery banks. At 37kg, positioning during installation needs two people or mechanical assistance.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems using 48V inverter-chargers such as the Victron MultiPlus or Quattro range\u003c\/li\u003e\n\u003cli\u003eGrid-tied battery backup systems requiring a 48V lithium bank for critical loads\u003c\/li\u003e\n\u003cli\u003eMarine and vehicle installations needing a 48V lithium battery with integrated BMS\u003c\/li\u003e\n\u003cli\u003eCommercial and agricultural off-grid sites with daily cycling\u003c\/li\u003e\n\u003cli\u003eExpanding existing Victron LiFePO4 NG battery banks by adding units in parallel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron LiFePO4 Battery 51.2V 100Ah NG (BAT548110620)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis battery runs at 51.2V nominal, a high-voltage DC system. Installation should be carried out by a qualified electrician or accredited installer experienced with lithium battery systems, with appropriate fusing, cabling and disconnection devices in place.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060751986976,"sku":"BAT548110620","price":1719.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat548110620-1.webp?v=1785503370"},{"product_id":"victron-lifepo4-150ah-ng-battery","title":"Victron LiFePO4 Battery 12.8V 150Ah NG 1920Wh | BAT512115620","description":"\u003cp\u003eThe Victron LiFePO4 Battery 12.8V 150Ah NG is a lithium iron phosphate battery from Victron Energy's NG (New Generation) range, built for solar, off-grid, marine and vehicle systems that need a lightweight replacement for lead-acid. It stores 1920Wh of nominal energy at 25°C and weighs 14.7 kg.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, LiFePO4 (lithium iron phosphate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal voltage\u003c\/strong\u003e, 12.8V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 150Ah, 1920Wh nominal energy at 25°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 14.7 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle life\u003c\/strong\u003e, 5000 cycles at 50% DoD, 3000 cycles at 70% DoD, 2500 cycles at 80% DoD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound trip efficiency\u003c\/strong\u003e, 92%\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBattery management\u003c\/h2\u003e\u003cp\u003eCharge voltage sits between 14V and 14.2V, with a float voltage of 13.5V. The NG series works with the Lynx Smart BMS NG for cell-level balancing, over-charge, over-discharge and temperature protection, with Bluetooth built into the BMS for monitoring through VictronConnect. Firmware updates to the battery are handled automatically by the BMS, and the unit is repairable, with a cover that can be removed with screws.\u003c\/p\u003e\u003ch3\u003eCharging notes\u003c\/h3\u003e\u003cp\u003eUse a charger or inverter\/charger set to a lithium-compatible profile rather than lead-acid parameters. Multiple batteries can be connected within the limits of the BMS to build larger banks; plan parallel or series configurations carefully so charging stays balanced across every unit.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuits off-grid solar storage on 12V or 24V banks, marine house battery banks, motorhome and campervan auxiliary power, portable off-grid setups, and backup power for telecoms or small commercial installations. At 14.7 kg it is considerably lighter to handle than a lead-acid battery of similar capacity, which matters in marine and vehicle installs where weight and space are limited.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron LiFePO4 Battery 12.8V 150Ah NG (BAT512115620)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060762636576,"sku":"BAT512115620","price":540.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat512115620-1.webp?v=1785505239"},{"product_id":"victron-lifepo4-battery-300ah","title":"Victron LiFePO4 Battery 12.8V 300Ah NG | BAT512130620","description":"\u003cp\u003eThe Victron LiFePO4 Battery 12.8V 300Ah NG (BAT512130620) is a lithium iron phosphate battery built for off-grid, marine and mobile power systems needing a high-capacity 12V bank. It delivers 300Ah of capacity at 12.8V nominal, totalling 3.84kWh of energy storage.\u003c\/p\u003e\u003ch2\u003eVictron LiFePO4 battery features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, lithium iron phosphate (LiFePO4), a stable cell technology with no thermal runaway risk associated with other lithium chemistries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 12.8V nominal, a direct replacement or upgrade for 12V lead-acid battery positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 300Ah, giving 3.84kWh of total energy storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e, NG (New Generation) with integrated battery management system (BMS) functionality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 28kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEcosystem\u003c\/strong\u003e, works with Victron charge controllers and inverter\/chargers, including VE.Bus and Venus OS monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy LiFePO4\u003c\/h2\u003e\u003cp\u003eLiFePO4 cells hold a flatter discharge curve than lead-acid, so usable voltage stays consistent until the battery is nearly depleted. That matters for inverters and loads sensitive to voltage drop. The integrated BMS in this NG series battery protects against overcharge, over-discharge, over-temperature and short circuit conditions, and communicates state-of-charge to compatible Victron equipment without extra external BMS hardware in many setups.\u003c\/p\u003e\u003cp\u003eBatteries can be connected in series or parallel to build 24V or 48V banks, or to add capacity, following Victron's configuration guidelines.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems needing a high-capacity 12V or series-connected bank.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat house banks replacing lead-acid.\u003c\/li\u003e\n\u003cli\u003eMotorhomes, expedition vehicles and other mobile power systems.\u003c\/li\u003e\n\u003cli\u003eBackup power where long cycle life and low maintenance matter.\u003c\/li\u003e\n\u003cli\u003eVictron systems built around MultiPlus, Quattro or SmartSolar equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit by a qualified electrician or accredited installer familiar with lithium systems. Chargers and controllers must use lithium-specific charge profiles, not lead-acid settings. Follow Victron's published guidelines when wiring multiple batteries in series for BMS coordination.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron LiFePO4 Battery 12.8V 300Ah NG (BAT512130620)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060762669344,"sku":"BAT512130620","price":1154.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat512130620-1.webp?v=1785505256"},{"product_id":"victron-lifepo4-battery-200ah-ng-2","title":"Victron LiFePO4 Battery 12.8V 200Ah NG | BAT512120620","description":"\u003cp\u003eThe Victron LiFePO4 battery 12.8V 200Ah NG is a lithium iron phosphate unit from Victron's New Generation series, built for 12V off-grid, marine and mobile power systems. It delivers 2.56kWh of usable capacity in a single case, with weight and cycle life suited to demanding storage applications.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, lithium iron phosphate (LiFePO4), noted for stable, thermally safe cells compared with other lithium types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12.8V nominal, 200Ah, giving 2.56kWh per battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, New Generation series design with an integrated BMS for cell balancing, over-charge, over-discharge and short-circuit protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 18.4kg, lighter than an equivalent lead-acid battery of the same capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration\u003c\/strong\u003e, works with Victron charge controllers, inverter\/chargers and the VE.Bus and VE.Direct ecosystem where supported by the NG BMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e, suitable for series and parallel connection to increase voltage or capacity, following Victron's configuration guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eLiFePO4 cells do not undergo thermal runaway under normal fault conditions, unlike NMC or NCA lithium chemistries, which makes them appropriate for enclosed spaces such as boat bilges, vehicle cabinets and off-grid battery rooms. The flat discharge curve keeps voltage near-constant across most of the state of charge, which benefits inverters and DC loads sensitive to voltage drop.\u003c\/p\u003e\u003cp\u003eThe NG designation marks Victron's updated generation of standalone lithium batteries. The integrated BMS handles cell-level protection without a separate external BMS for basic operation, though pairing with Victron system monitoring via a compatible interface or GX device is recommended for full visibility. At 200Ah and 12.8V nominal, it works as a building block for 12V systems needing substantial storage, and can be paralleled for higher capacity.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eOff-grid solar storage in cabins and remote installations, marine house battery banks, motorhome and campervan leisure systems, mobile vehicle power, and backup power for DC systems and small inverters.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or an experienced system integrator familiar with lithium battery systems. LiFePO4 batteries need a lithium-compatible charger profile; do not use AGM, gel or standard lead-acid profiles. Confirm the charge source is configured for 12.8V LiFePO4 chemistry before connecting. Secure the battery against movement in marine and vehicle installations and ensure adequate ventilation. Where the battery forms part of a larger system, coordinate BMS communication with the system controller for correct charge and load disconnect.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron LiFePO4 Battery 12.8V 200Ah NG (BAT512120620)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060768239904,"sku":"BAT512120620","price":719.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat512120620-1.webp?v=1785505869"},{"product_id":"victron-ng-lifepo4-100ah-battery","title":"Victron LiFePO4 Battery 25.6V 100Ah NG | BAT524110620","description":"\u003cp\u003eThe Victron LiFePO4 Battery 25.6V 100Ah NG is a lithium iron phosphate battery for off-grid, marine and backup power systems. Part of Victron's NG (New Generation) range, it holds 2.56kWh of usable energy at 25.6V nominal and is designed to work within Victron's managed BMS architecture rather than as a standalone lead-acid replacement.\u003c\/p\u003e\u003ch2\u003eKey features of this victron lifepo4 battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, LiFePO4 (lithium iron phosphate) cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 25.6V nominal, suited to 24V DC systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 100Ah, giving 2.56kWh of stored energy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e, NG (New Generation), built to integrate with Victron's VE.Bus and BMS ecosystem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 18.5kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e, BAT524110620, GTIN 8719076058939.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eLiFePO4 cells tolerate deep cycling without the degradation seen in lead-acid alternatives, and don't need the same float maintenance regime. This 25.6V configuration suits 24V systems common in marine, vehicle and mid-scale off-grid installs.\u003c\/p\u003e\u003cp\u003eA compatible Victron Battery Management System is required to manage over-charge, over-discharge and over-temperature protection. This is not a drop-in swap for lead-acid without the correct BMS and charger set-up, so installers should confirm compatibility before specifying it. At 18.5kg it's manageable for one person to fit in most cases; take care in confined or overhead mounting positions. Multiple units can be paralleled to expand capacity, following Victron's published guidance for the NG series.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed in 24V off-grid solar storage, marine and narrowboat house banks, motorhome auxiliary power, and UPS or backup systems specifying lithium. Also used to expand existing Victron NG battery banks in parallel.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron LiFePO4 Battery 25.6V 100Ah NG (BAT524110620)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis battery must be installed with a compatible Victron BMS by a qualified installer experienced with lithium systems. Incorrect wiring or an absent BMS can damage cells or create a safety hazard. Marine installations should be mounted securely and ventilated per the vessel's electrical standards; grid-connected or PV installs in the UK should be checked by an MCS-accredited installer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060768567584,"sku":"BAT524110620","price":794.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat524110620-1.webp?v=1785506040"},{"product_id":"victron-ve-bus-bms-ng-unit","title":"Victron VE.Bus BMS NG Battery Management System | BMS300200300","description":"\u003cp\u003eThe Victron VE.Bus BMS NG is a battery management system for Victron lithium battery banks connected via the VE.Bus interface. It handles cell protection, charge control and system coordination for lithium installations in off-grid, marine and mobile setups. This unit is the next-generation replacement for the original VE.Bus BMS and is the version recommended for current Victron lithium installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface\u003c\/strong\u003e, connects via VE.Bus to coordinate with compatible Victron inverters, inverter\/chargers and chargers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCell protection\u003c\/strong\u003e, signals connected devices to stop charging or discharging when battery limits are reached.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware-level protection\u003c\/strong\u003e, operates independently of any GX device or monitoring software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.217 kg, suitable for compact installations in marine, vehicle and off-grid enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration\u003c\/strong\u003e, works alongside Venus OS devices for monitoring and control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-alarm output\u003c\/strong\u003e, allows a controlled shutdown before hard protection limits are triggered.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe VE.Bus BMS NG sits between the Victron lithium battery bank and the VE.Bus-connected inverter or inverter\/charger, protecting cells from overcharge, over-discharge and excessive temperature. When a cell approaches its limit, the BMS sends a signal over VE.Bus telling the connected device to reduce or stop charging or discharging.\u003c\/p\u003e\u003cp\u003eThe NG designation means this unit supersedes the original VE.Bus BMS and is the currently supported version for new installations. Confirm compatibility with your specific battery model and firmware before fitting it. It does not replace a battery's own integrated BMS where one exists; it acts as the system-level coordinator on VE.Bus-based setups.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar systems using Victron MultiPlus or Quattro inverter\/chargers with Victron lithium batteries.\u003c\/li\u003e\n\u003cli\u003eMarine installations needing cell-level protection and VE.Bus integration.\u003c\/li\u003e\n\u003cli\u003eVehicle and motorhome builds with Victron lithium battery banks on VE.Bus-connected chargers.\u003c\/li\u003e\n\u003cli\u003eReplacing legacy VE.Bus BMS units in existing Victron lithium systems.\u003c\/li\u003e\n\u003cli\u003eSystems monitored via Venus OS GX devices requiring BMS status visibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron VE.Bus BMS NG unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or experienced Victron installer familiar with lithium battery systems and VE.Bus architecture. Check battery and firmware compatibility beforehand. This unit is not suitable for non-Victron batteries or batteries with their own integrated BMS that does not use the VE.Bus BMS protocol.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061010133280,"sku":"BMS300200300","price":115.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bms300200300-1.webp?v=1785508455"},{"product_id":"victron-agm-deep-cycle-220ah","title":"Victron 12V 220Ah AGM Deep Cycle Battery | BAT412201084","description":"\u003cp\u003eThe Victron Energy 12V 220Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery rated at C20 capacity. It suits cyclic applications in solar, off-grid, marine and backup power systems where deep discharge performance matters.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 220Ah rated at the C20 discharge rate, the standard reference for solar and off-grid sizing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, Absorbent Glass Mat (AGM) design with no free electrolyte, making it spill-proof for confined or enclosed spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed design\u003c\/strong\u003e, valve-regulated, no water topping needed, minimal gassing under normal charging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 12V nominal, compatible with standard 12V charge controllers, inverters and battery management systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 62.5 kg, reflecting the lead content used for genuine deep cycle performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand compatibility\u003c\/strong\u003e, works with Victron charge controllers, inverters and battery monitors when configured with Victron's recommended AGM charge profile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eAGM deep cycle batteries use thicker plates and denser active material than standard standby batteries, letting them withstand repeated deep discharge and recharge cycles. The C20 rating means the 220Ah figure is measured over a 20-hour discharge period. The AGM separator holds electrolyte against the plates rather than letting it pool freely, which improves charge acceptance and reduces internal resistance compared with flooded equivalents. It can be installed in any orientation except inverted, with no acid spillage risk during transport or installation.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to solar energy storage in off-grid and hybrid systems with MPPT or PWM charge controllers, marine house battery banks, motorhome and campervan leisure installations, UPS and backup power for telecoms or security equipment, and remote site power. It can also be wired into multi-battery 12V, 24V or 48V banks in series or parallel.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eAt 62.5 kg, two people or handling equipment are needed for safe positioning. Use correctly rated cable, fusing and terminal hardware, and follow Victron's published AGM charge profile to avoid undercharging or overcharging.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 220Ah AGM Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061010231584,"sku":"BAT412201084","price":381.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412201084-1.webp?v=1785508471"},{"product_id":"victron-gel-deep-cycle-battery-220ah","title":"Victron 12V 220Ah Gel Deep Cycle Battery | BAT412201104","description":"\u003cp\u003eThe Victron Energy 12V 220Ah Gel Deep Cycle Battery is a sealed, maintenance-free lead-acid battery for cyclic and standby use in solar, off-grid and marine systems. Capacity is rated at C20, giving a predictable discharge curve when sizing a battery bank.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 220Ah rated at C20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrolyte\u003c\/strong\u003e, gel construction, no free liquid, spill-proof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycling\u003c\/strong\u003e, deep cycle design suited to daily solar charge and discharge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, sealed, valve-regulated (VRLA), no topping up required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 12V nominal, can be wired in series or parallel for 24V or 48V banks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Victron MPPT charge controllers and MultiPlus\/Quattro inverter-chargers when set to a gel charge profile\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eGel batteries use a silica-based gelled electrolyte instead of liquid acid. This immobilises the electrolyte, reducing stratification and self-discharge compared with flooded lead-acid, and allows mounting in orientations other than upright. For solar installations that sit unused for periods, the lower self-discharge is useful in practice.\u003c\/p\u003e\u003cp\u003eThe deep cycle rating means the battery tolerates regular discharge to a significant depth of discharge, unlike standby batteries built for shallow float cycling. Correct charge voltage matters: overcharging is the main cause of premature gel battery failure, so the charge source needs a gel-specific profile rather than one set for AGM or flooded types.\u003c\/p\u003e\u003cp\u003eAt 62.5 kg this is a heavy unit. Plan for structural support, cable routing and safe handling, and torque terminal connections to the manufacturer's specification.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar storage in residential, agricultural and remote installations, marine house battery banks, motorhome and leisure vehicle power systems, and backup power for telecoms, security or industrial equipment. Multiple 12V units can be wired in series for 24V or 48V banks.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 220Ah Gel Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061010723104,"sku":"BAT412201104","price":387.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412201104-1.webp?v=1785508596"},{"product_id":"agm-deep-cycle-battery-100ah","title":"Victron 12V 100Ah AGM Super Cycle Leisure Battery M6 | BAT412110081","description":"\u003cp\u003eThe Victron AGM Super Cycle is a 12V 100Ah deep cycle leisure battery for caravans, motorhomes, campervans and off-grid solar systems. It uses AGM (absorbent glass mat) construction with threaded M6 insert terminals for a secure, low-resistance connection under repeated cyclic use.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 12V 100Ah, suited to daily deep discharge cycling in leisure and off-grid applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAGM construction\u003c\/strong\u003e, sealed, valve-regulated and spill-proof, allowing mounting in different orientations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, threaded M6 insert type, giving a solid mechanical connection that resists loosening or corrosion over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle tolerance\u003c\/strong\u003e, Super Cycle design handles deeper and more frequent discharge than standard AGM leisure batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow internal resistance\u003c\/strong\u003e, supports higher charge and discharge currents when paired with solar charge controllers or inverter\/chargers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance\u003c\/strong\u003e, sealed and maintenance-free, with no topping up or acid handling required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eAGM batteries hold electrolyte in a glass mat separator rather than as free liquid, which is why they can be sealed and mounted on their side. That matters where battery locker space is limited and orientation is not always flat. The Super Cycle range is built for applications that draw the battery down repeatedly, rather than the shallow, occasional discharge typical of a starter battery.\u003c\/p\u003e\u003cp\u003eThe M6 threaded insert terminals accept an M6 bolt directly rather than a bolt-through post, giving a more consistent connection over the battery's life, particularly in vehicles subject to vibration. Pairing with a solar charge controller or inverter\/charger set to an AGM charge profile helps protect cycle life.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLeisure battery for caravans and motorhomes running lighting, water pumps and low-power appliances.\u003c\/li\u003e\n\u003cli\u003eHouse battery for campervan conversions alongside a solar panel and charge controller.\u003c\/li\u003e\n\u003cli\u003eOff-grid solar storage for cabins, sheds or remote monitoring equipment.\u003c\/li\u003e\n\u003cli\u003eBackup power for small inverter systems expected to deep cycle regularly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron 12V\/100Ah AGM Super Cycle battery (M6 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061011247392,"sku":"BAT412110081","price":238.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412110081-1.webp?v=1785508735"},{"product_id":"agm-super-cycle-battery-60ah-m6","title":"Victron 12V 60Ah AGM Super Cycle Battery M6 | BAT412060082","description":"\u003cp\u003eThe Victron Energy 12V 60Ah AGM Super Cycle battery is a valve-regulated lead-acid battery built for regular deep cycling. It uses a modified plate alloy and higher-density paste to hold capacity through repeated deep discharges better than a standard AGM cell, making it suited to solar, marine and off-grid setups that draw the battery down daily.\u003c\/p\u003e\u003ch2\u003eVictron AGM battery features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 12V nominal voltage, 60Ah capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycling design\u003c\/strong\u003e, AGM Super Cycle construction tolerates deeper discharges than standard AGM without the plate degradation that limits conventional designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M6 threaded insert terminals for a secure, vibration-resistant connection with standard M6 bolts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed VRLA\u003c\/strong\u003e, valve-regulated design needs no water topping and suits enclosed or poorly ventilated spaces with appropriate precautions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharger compatibility\u003c\/strong\u003e, works with Victron chargers, MPPT solar charge controllers and MultiPlus inverter-chargers when set to the correct AGM profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 14.2 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSolar off-grid systems with daily charge and discharge cycles, marine house battery banks, motorhome and caravan leisure setups, UPS and backup power with regular discharge events, small off-grid cabins and remote monitoring, and trolling motor or auxiliary propulsion systems.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSet the charging source, whether a solar charge controller, inverter-charger or standalone charger, to an AGM profile with correct absorption and float voltages. Do not use a gel or lithium charge profile. The battery can be mounted in any orientation except inverted, and must not be installed in a fully sealed airtight enclosure since VRLA batteries can vent gas under fault or overcharge conditions.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 60Ah AGM Super Cycle Battery (M6 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061011706144,"sku":"BAT412060082","price":123.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412060082-1.webp?v=1785508779"},{"product_id":"agm-battery-12v-110ah-victron","title":"Victron 12V 110Ah AGM Deep Cycle Battery | BAT412101084","description":"\u003cp\u003eThe Victron 12V 110Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery rated at C20 capacity. It suits cyclic use in solar, off-grid, marine and backup power systems that need reliable deep discharge performance.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 110Ah rated at the C20 discharge rate, suited to deep cycle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, Absorbent Glass Mat (AGM) design holds the electrolyte in place, avoiding spillage and topping up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed VRLA design\u003c\/strong\u003e, can be installed in any orientation except upside down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-discharge\u003c\/strong\u003e, low rate, suiting standby and seasonal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharger compatibility\u003c\/strong\u003e, works with Victron MPPT charge controllers, MultiPlus and Quattro inverter\/chargers when set to the correct AGM charge profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and weight\u003c\/strong\u003e, 12V nominal, 30kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eA glass mat separator keeps the electrolyte in place rather than letting it flood freely, which cuts gassing during normal operation. That makes the battery a safer choice for enclosed spaces such as boat lockers, caravan compartments and off-grid cabins, with no risk of acid spill in transit or during fitting.\u003c\/p\u003e\u003cp\u003eAt 110Ah (C20), a single unit gives a 12V system 1.32kWh of theoretical capacity. Usable capacity depends on the depth of discharge set by the system designer; for AGM batteries a maximum of 50% depth of discharge is generally recommended to protect cycle life. Pairing the battery with a Victron MPPT or inverter\/charger set to the AGM algorithm ensures correct absorption and float voltages.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSolar off-grid storage for homes, farms and remote sites; marine house battery banks; caravan and motorhome leisure systems; UPS and backup power for telecoms and security equipment; and 12V battery banks built from multiple units in series or parallel.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by someone familiar with lead-acid battery systems, using correctly rated fusing and cabling. Batteries connected in parallel or series should be matched for age, capacity and state of charge, and a qualified installer is recommended when integrating with a solar or inverter system.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061012623648,"sku":"BAT412101084","price":205.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412101084-1.webp?v=1785508878"},{"product_id":"victron-gel-deep-cycle-battery-60ah","title":"Victron 12V 60Ah Gel Deep Cycle Battery | BAT412550104","description":"\u003cp\u003eThe Victron Energy 12V 60Ah Gel Deep Cycle Battery is a sealed, maintenance-free unit built for cyclic and standby use in solar, off-grid and marine systems. Its gel electrolyte construction suits installations where orientation or ventilation is limited. Capacity is rated at C20.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 60Ah rated at the C20 discharge rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGel electrolyte\u003c\/strong\u003e, no free liquid acid, reducing spillage and corrosion risk in confined or tilted installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed VRLA design\u003c\/strong\u003e, valve-regulated, no water topping required, minimal gas under normal operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle rated\u003c\/strong\u003e, built to withstand repeated discharge to low state-of-charge without early capacity loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal voltage\u003c\/strong\u003e, 12V, works with standard 12V charge controllers, inverters and monitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 18kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe gel electrolyte is immobilised rather than liquid, so the battery can be mounted in most orientations (except inverted) and copes better with vibration than flooded lead-acid types. That's useful where batteries sit in unventilated enclosures or vehicle-mounted boxes.\u003c\/p\u003e\u003cp\u003eThe C20 figure measures the 60Ah capacity over a 20-hour discharge. Higher currents over shorter periods reduce the usable capacity, which is normal for lead-acid chemistry, so size a system around C20 and derate for high-current loads. Victron's gel range pairs with Victron charge controllers and inverter-chargers that include gel-specific charge profiles.\u003c\/p\u003e\u003cp\u003eAs a VRLA battery it recombines charging gases internally under normal conditions, so it suits enclosed spaces, though ventilation is still advised as a precaution against overcharging.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolar off-grid 12V battery banks needing deep cycle performance.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat house batteries where spillage resistance matters.\u003c\/li\u003e\n\u003cli\u003eMotorhome and campervan leisure battery systems.\u003c\/li\u003e\n\u003cli\u003eUPS and standby power in commercial or industrial settings.\u003c\/li\u003e\n\u003cli\u003eRemote monitoring stations and telecoms cabinets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 60Ah Gel Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit by a qualified electrician or experienced system integrator. Set the charge source to the correct gel profile: an AGM or flooded profile risks overcharging and can permanently damage gel cells. Install in a ventilated location away from heat sources and open flame, with terminals torqued correctly and protected against short circuit. Use an MCS-accredited installer for solar PV work where required by your DNO or insurer.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061013082400,"sku":"BAT412550104","price":149.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412550104-1.webp?v=1785508976"},{"product_id":"victron-smallbms-ng-battery-management","title":"Victron smallBMS NG Battery Management System | BMS400100300","description":"\u003cp\u003eThe Victron Energy smallBMS NG is a compact battery management system built for Victron LiFePO4 batteries in smaller off-grid and marine setups. It guards against over-charge, over-discharge and over-temperature conditions, suited to systems where a full-featured BMS would be more than is needed.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCell protection\u003c\/strong\u003e, guards against over-voltage, under-voltage and over-temperature on compatible Victron LiFePO4 batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 66 g, for space-constrained installs in boats, campervans and small off-grid cabins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad disconnect output\u003c\/strong\u003e, cuts non-essential loads once the battery reaches a low state of charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge disconnect output\u003c\/strong\u003e, signals chargers to stop when the battery is full or a cell fault is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNG variant\u003c\/strong\u003e, updated internal architecture for compatibility with the current Victron LiFePO4 battery range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, clearly defined load disconnect and charge disconnect terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe smallBMS NG monitors individual cell voltages and battery temperature within compatible Victron LiFePO4 batteries. When a cell hits its upper or lower voltage limit, or temperature moves outside the safe range, the BMS activates its disconnect outputs. It is a passive protection approach: the unit does not actively balance cells, relying instead on the battery's internal balancing and the charger's absorption settings.\u003c\/p\u003e\u003cp\u003eThe charge disconnect output is typically wired to the remote on\/off input of a Victron charger or MPPT solar charge controller. The load disconnect output goes to a relay or load switch, shedding non-critical loads before the battery reaches a damaging depth of discharge. No high current is routed through the BMS itself, keeping the unit small and the wiring tidy.\u003c\/p\u003e\u003cp\u003eNG marks this as the current production version, updated for compatibility with Victron's present LiFePO4 battery range, and replaces the earlier smallBMS variant for new installations.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall off-grid cabins and garden buildings running a single Victron LiFePO4 battery.\u003c\/li\u003e\n\u003cli\u003eMarine installations including sailing yachts, motorboats and narrowboats with compact lithium banks.\u003c\/li\u003e\n\u003cli\u003eCampervan and motorhome leisure battery systems using Victron LiFePO4 batteries.\u003c\/li\u003e\n\u003cli\u003ePortable power systems and small solar storage setups.\u003c\/li\u003e\n\u003cli\u003eReplacement or upgrade from the original smallBMS in existing Victron lithium installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy smallBMS NG unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eUse only with compatible Victron LiFePO4 batteries. Not suitable for lead-acid, AGM, gel or third-party lithium batteries. Wiring should be carried out by a qualified electrician or experienced marine or off-grid installer familiar with lithium systems. Incorrect wiring of either disconnect output can damage the battery or cause system failure. Check compatibility with your specific Victron LiFePO4 battery model before fitting.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061013508384,"sku":"BMS400100300","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bms400100300-1.webp?v=1785509039"},{"product_id":"victron-240ah-agm-battery-m8","title":"Victron 12V 240Ah AGM Deep Cycle Battery M8 | BAT412124081","description":"\u003cp\u003eThe Victron Energy 12V 240Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery built for cyclic use in solar, off-grid and marine systems. It uses M8 threaded insert terminals and offers 240Ah of capacity for installations that need a single large-capacity 12V unit rather than several smaller batteries wired together.\u003c\/p\u003e\u003ch2\u003eKey features of this AGM deep cycle battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 240Ah at 12V nominal voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, AGM (Absorbent Glass Mat), sealed and valve-regulated, spill-proof for enclosed spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded inserts for secure, torque-controlled connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycling\u003c\/strong\u003e, deep cycle design rated for repeated charge and discharge, unlike standby or starter batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance\u003c\/strong\u003e, sealed and maintenance-free, no electrolyte topping up required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 65.1 kg, so plan for mechanical lifting and enclosure loading.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe glass mat separator holds the electrolyte in place, so there's no free liquid inside the cell. That means it can be mounted in orientations other than upright, and used in vehicles, boats or enclosures where a flooded battery wouldn't be allowed. Gas recombination happens internally in normal use; the safety valve only opens under fault or overcharge conditions.\u003c\/p\u003e\u003cp\u003eTwo units in series give a 24V bank, four give 48V. Parallel strings are possible too, though keeping the number of parallel strings low tends to help long-term reliability. Charging needs to sit within the AGM profile: overcharging speeds up water loss and grid corrosion, undercharging causes sulphation. Victron MPPT controllers and inverter\/chargers include a dedicated AGM preset for this.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar storage, marine house battery banks, motorhome leisure systems, UPS and backup power, and telecoms or industrial standby duty with regular cycling. Works within 12V, 24V or 48V Victron battery bank configurations.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAt 65.1 kg this battery needs two people or mechanical assistance to move safely, and the mounting surface or enclosure must be rated for that weight. Torque the M8 terminal bolts to the manufacturer's specification, use correctly rated DC cabling and fusing, and set any charger or controller to the AGM profile. Don't fit it inside a fully sealed, unventilated enclosure, since the safety valve may need to vent under fault conditions. Grid-connected work should be carried out by a qualified electrician.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 240Ah AGM Deep Cycle Battery (M8 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061014163744,"sku":"BAT412124081","price":382.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412124081-1.webp?v=1785509120"},{"product_id":"m8-circular-connector-cable-victron","title":"Victron M8 Circular Connector 3 Pole Cable 1m | ASS030560100","description":"\u003cp\u003eThis Victron Energy M8 circular connector cable gives a 3-pole male to female connection for battery management and BMS wiring. Supplied as a bag of two 1-metre cables, it suits installers working with Victron BMS systems and related components.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector format\u003c\/strong\u003e, M8 circular, 3-pole, male and female ends on a 1-metre cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity\u003c\/strong\u003e, bag of 2, giving a pair of identical cables per pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse\u003c\/strong\u003e, designed for Victron Energy BMS and battery management wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.064 kg per pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference\u003c\/strong\u003e, SKU ASS030560100, GTIN 8719076019862.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe M8 circular connector is an industrial-format connector used across Victron Energy battery and BMS installations. Its 3-pole configuration carries signal or low-voltage connections between BMS units, battery monitors and associated control equipment. The locking circular format gives a secure connection, less prone to accidental disconnection than open terminal blocks.\u003c\/p\u003e\u003cp\u003eEach cable is 1 metre long, which suits panel, cabinet or battery enclosure installations where components sit close together. The male to female arrangement allows daisy-chaining or direct point-to-point connection between compatible Victron devices. A bag of two means a spare cable is on hand for larger installations or extra connection points.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnecting Victron BMS units to battery monitors or control panels.\u003c\/li\u003e\n\u003cli\u003eSignal and low-voltage wiring within Victron battery management systems.\u003c\/li\u003e\n\u003cli\u003eOff-grid and marine battery installations using Victron Energy components.\u003c\/li\u003e\n\u003cli\u003eReplacement or extension cabling for existing Victron BMS wiring runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2 x M8 circular connector male\/female 3-pole cables, each 1 metre in length.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eCheck that connector poles and pinout match the specific Victron devices before installation. Battery system wiring should be carried out by a qualified electrician or experienced installer familiar with Victron Energy equipment and relevant electrical safety regulations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061014196512,"sku":"ASS030560100","price":27.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ass030560100-1.webp?v=1785509127"},{"product_id":"victron-agm-battery-12v-8ah","title":"Victron 12V 8Ah AGM Deep Cycle Battery | BAT212070084","description":"\u003cp\u003eThe Victron Energy 12V 8Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery rated at C20 capacity. It suits small off-grid systems, UPS applications and solar charge storage, or anywhere a compact, reliable AGM cell is needed. The absorbed glass mat construction removes the need for electrolyte topping and allows installation in any orientation.\u003c\/p\u003e\u003ch2\u003eKey features of this deep cycle battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 8Ah rated at the C20 discharge rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAGM construction\u003c\/strong\u003e, sealed, valve-regulated and maintenance-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle design\u003c\/strong\u003e, tolerates repeated charge and discharge cycles better than standard standby batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting flexibility\u003c\/strong\u003e, can be installed in any orientation thanks to the sealed, spill-proof build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 2.32 kg, suitable for space-constrained enclosures and portable equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eAGM batteries absorb the electrolyte into a fibreglass mat separator rather than holding it as free liquid. This makes them spill-proof, reduces gassing under normal charging and lets the battery be mounted on its side or end if the installation calls for it. The valve-regulated design means no periodic water top-up, useful in remote or unattended sites.\u003c\/p\u003e\u003cp\u003eThe C20 rating measures the 8Ah capacity over a 20-hour discharge period. Drawing current faster than this reduces usable capacity, which is normal for lead-acid chemistry. For small solar systems, alarm panels, UPS units and similar low-draw uses, 8Ah C20 is a realistic working figure. At 2.32 kg it is easy to handle and transport without lifting equipment.\u003c\/p\u003e\u003cp\u003eThis battery works directly with Victron charge controllers and inverter-chargers, and the standard 12V AGM chemistry is also compatible with any charger set to an appropriate AGM profile. Correct charge voltage settings matter for cycle life.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall off-grid solar storage where a compact 12V battery is required.\u003c\/li\u003e\n\u003cli\u003eUPS and standby power for alarm panels, routers and control equipment.\u003c\/li\u003e\n\u003cli\u003ePortable power packs and field equipment.\u003c\/li\u003e\n\u003cli\u003eCaravan, motorhome and marine auxiliary power where space and weight are limited.\u003c\/li\u003e\n\u003cli\u003eReplacement battery in existing 12V AGM installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eCharge with a charger set to an AGM profile. Do not use an unregulated charger or a flooded lead-acid profile, as incorrect voltages shorten battery life. Integration into solar or inverter systems should be carried out by a qualified electrician or accredited installer. Keep terminals protected against short circuit during handling and installation.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 8Ah AGM Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061014458656,"sku":"BAT212070084","price":17.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat212070084-1.webp?v=1785509168"},{"product_id":"agm-super-cycle-battery-12v-25ah","title":"Victron 12V 25Ah AGM Super Cycle Battery M5 | BAT412025081","description":"\u003cp\u003eThe Victron Energy AGM Super Cycle 12V 25Ah battery is a deep-cycle lead-acid battery built for applications where deep discharging happens regularly. It suits solar storage, marine and off-grid systems where a standard AGM battery would wear out faster under the same cycling. The M5 threaded insert terminals give a secure, vibration-resistant connection for demanding installs.\u003c\/p\u003e\u003ch2\u003eKey features of this victron agm battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle tolerance\u003c\/strong\u003e, AGM Super Cycle technology tolerates deeper, more frequent discharge than standard AGM cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 12V nominal voltage with 25Ah capacity, giving 300Wh nominal energy storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M5 threaded inserts accept M5 screws directly into the casing, reducing the risk of stripped threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, valve-regulated, sealed VRLA design, maintenance-free, mountable in any orientation except inverted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 6.45 kg, practical for portable or space-constrained installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with the Victron charging ecosystem, including MPPT controllers and multi-stage chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eStandard AGM batteries lose capacity after a limited number of deep discharge cycles. The Super Cycle range uses a modified plate design and electrolyte formulation that allows discharge to lower states of charge without the same plate sulphation. That makes it a practical fit for solar systems drawn down overnight or through poor weather.\u003c\/p\u003e\u003cp\u003eUsable capacity depends on the depth of discharge limit set by the charge controller or inverter. Victron recommends pairing Super Cycle batteries with compatible Victron chargers to get the most from the cycle life. As a sealed VRLA battery, there's no topping up of electrolyte required, and it can be installed indoors in a ventilated enclosure. It isn't intended for float-only standby duty, where lithium or gel chemistry would suit better.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall off-grid solar systems with regular overnight discharge cycles.\u003c\/li\u003e\n\u003cli\u003eMarine auxiliary power, where vibration resistance and sealed construction matter.\u003c\/li\u003e\n\u003cli\u003eMotorhome and caravan leisure battery banks.\u003c\/li\u003e\n\u003cli\u003eUPS and backup power systems with frequent discharge events.\u003c\/li\u003e\n\u003cli\u003ePortable power stations and mobile off-grid setups.\u003c\/li\u003e\n\u003cli\u003eSupplementary storage added to an existing 12V battery bank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 25Ah AGM Super Cycle Battery (M5 terminals)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eHave this battery installed and connected by a competent electrician or qualified installer familiar with DC battery systems. Set the charging source to the correct voltage profile for AGM batteries, not one intended for gel or lithium chemistries. Install in a ventilated space and avoid inverting the battery in use. On systems forming part of a grid-connected installation, wiring and protection devices should comply with BS 7671 and any applicable DNO requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061064921376,"sku":"BAT412025081","price":45.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412025081-1.webp?v=1785510489"},{"product_id":"agm-deep-cycle-battery-165ah","title":"Victron 12V 165Ah AGM Deep Cycle Battery | BAT412151084","description":"\u003cp\u003eThe Victron 12V 165Ah AGM deep cycle battery is a sealed, maintenance-free lead-acid battery built for cyclic use in solar, off-grid and backup power systems. Its 165Ah capacity is rated at the C20 discharge rate, giving installers a predictable energy reserve for repeated deep discharge duty.\u003c\/p\u003e\u003ch2\u003eKey features of this victron agm battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 165Ah rated at C20 discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, Absorbed Glass Mat (AGM), sealed and spill-proof with no free electrolyte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance\u003c\/strong\u003e, no water topping or electrolyte checks required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate design\u003c\/strong\u003e, optimised for repeated deep charge and discharge cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 12V nominal, suited to series or parallel wiring for 24V or 48V banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 44.5 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eWorks with Victron MPPT charge controllers and MultiPlus or Quattro inverter\/chargers when the correct AGM charge profile is programmed. Getting the charge voltages right matters: wrong settings are a common cause of early failure in AGM batteries used in cyclic roles.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolar energy storage for off-grid residential and commercial systems.\u003c\/li\u003e\n\u003cli\u003eBattery banks paired with MultiPlus or Quattro inverter\/chargers.\u003c\/li\u003e\n\u003cli\u003eMarine and leisure installations needing deep cycle capability.\u003c\/li\u003e\n\u003cli\u003eBackup power systems with regular discharge and recharge cycles.\u003c\/li\u003e\n\u003cli\u003eMobile and vehicle-based power systems requiring a sealed, spill-proof battery.\u003c\/li\u003e\n\u003cli\u003eTelecoms and remote monitoring sites with solar charging.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or accredited solar installer. At 44.5 kg, two-person handling or mechanical lifting equipment is recommended. When wiring multiple units into a bank, use equal-length, equal cross-section cabling to every terminal so charge and discharge stay balanced across the battery bank.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron 12V 165Ah AGM Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061065085216,"sku":"BAT412151084","price":360.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412151084-1.webp?v=1785510522"},{"product_id":"agm-deep-cycle-battery-200ah-m8","title":"Victron 12V 200Ah AGM Telecom Battery M8 Terminals | BAT412181164","description":"\u003cp\u003eThe Victron 12V 200Ah AGM Telecom battery is a sealed, maintenance-free deep cycle battery for standby and cyclic duty. Built to telecom-grade standards, it suits off-grid, backup power and telecommunications installations that need reliable performance under sustained discharge. M8 threaded insert terminals give a secure, bolt-down connection for high-current cabling.\u003c\/p\u003e\u003ch2\u003eKey features of this AGM telecom battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 200Ah.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, AGM (Absorbent Glass Mat), sealed and valve-regulated, no electrolyte topping needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded insert for a firm, vibration-resistant bolted connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty rating\u003c\/strong\u003e, telecom-grade, built for repeated deep discharge cycles and extended float operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with the full range of Victron charge controllers, inverter\/chargers and battery monitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 58.5 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the AGM design and M8 terminal matter\u003c\/h2\u003e\u003cp\u003eThe glass mat separator holds electrolyte in suspension, so there is no free liquid and the battery can be positioned without spillage risk. This also lowers internal resistance, supporting higher charge and discharge currents than a flooded lead-acid battery of the same capacity.\u003c\/p\u003e\u003cp\u003eThe M8 threaded insert takes a bolt directly into the casing rather than a post-style clamp, giving a connection that resists loosening from vibration or thermal cycling. This is the standard approach in telecom cabinets and industrial UPS installations where connection integrity has to hold over long service periods.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTelecommunications cabinet backup and standby power.\u003c\/li\u003e\n\u003cli\u003eOff-grid solar storage at 12V, 24V or 48V using series or parallel wiring.\u003c\/li\u003e\n\u003cli\u003eIndustrial UPS and critical infrastructure backup.\u003c\/li\u003e\n\u003cli\u003eMarine and vehicle power systems needing a sealed, high-capacity battery.\u003c\/li\u003e\n\u003cli\u003eRemote monitoring stations, repeater sites and rural communications infrastructure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 200Ah AGM Telecom Battery with M8 terminals.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAt 58.5 kg, two people or mechanical handling equipment are needed to position this battery safely. Provide adequate ventilation per VRLA guidance, even though AGM batteries emit minimal gas in normal use. Use correctly rated M8 bolts and cable lugs torqued to the manufacturer's specification, and have a qualified electrician handle bank wiring, fusing and system integration. On solar PV or inverter\/charger systems, confirm the charge voltage matches Victron's AGM profile to avoid overcharging or early capacity loss.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061065380128,"sku":"BAT412181164","price":376.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412181164-1.webp?v=1785510573"},{"product_id":"victron-agm-deep-cycle-battery-90ah","title":"Victron 12V 90Ah AGM Deep Cycle Battery M6 | BAT412800085","description":"\u003cp\u003eThe Victron Energy 12V 90Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery for cyclic use in solar, off-grid and marine systems. It uses absorbed glass mat construction with M6 threaded insert terminals, giving a secure bolt-down connection for professional installs.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 12V nominal voltage, 90Ah.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, AGM, sealed and valve-regulated, no risk of acid spillage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M6 threaded inserts for a vibration-resistant connection with standard M6 bolts and cable lugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle rating\u003c\/strong\u003e, built for repeated charge and discharge, unlike standby or starter batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 22.5 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEcosystem\u003c\/strong\u003e, compatible with Victron chargers, inverter\/chargers and battery monitors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eAGM batteries hold the electrolyte in a fibreglass mat separator, so there's no free liquid acid. That means the battery can be installed in any orientation other than inverted, and it's safe for enclosed spaces such as boat battery compartments, caravans and off-grid cabins where a vented flooded battery would need extra ventilation.\u003c\/p\u003e\u003cp\u003eBeing a deep cycle type, it's designed for regular, meaningful discharge and recharge rather than the shallow cycling of automotive or UPS standby batteries. That suits solar storage and inverter backup duties. The M6 threaded inserts take standard M6 bolts, so cable lugs fasten directly rather than relying on clamp connectors that can work loose.\u003c\/p\u003e\u003cp\u003ePair it with a Victron MPPT or inverter\/charger and select the correct AGM charge profile to get the best cycle life from it.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSolar storage in off-grid and hybrid systems, inverter and UPS backup power, marine house battery banks, motorhome and caravan leisure batteries, telecoms power supply, and vehicle-based power systems needing a sealed battery.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit by a qualified electrician or experienced system integrator. Set the charge source to the correct AGM profile before connecting, and match batteries by age, capacity and manufacturer when building a bank. Use correctly rated cable lugs at the M6 terminals and avoid overtightening, which can damage the threaded inserts. Install in a well-ventilated location as a precaution. Recycle in line with UK WEEE and hazardous waste regulations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 90Ah AGM Deep Cycle Battery (M6 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061065511200,"sku":"BAT412800085","price":167.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412800085-1.webp?v=1785510600"},{"product_id":"victron-12v-90ah-agm-deep-cycle-battery-bat412800084","title":"Victron 12V 90Ah AGM Deep Cycle Battery | BAT412800084","description":"\u003cp\u003eThe Victron Energy 12V 90Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery rated at C20 capacity. It suits cyclic applications in solar, off-grid, marine and backup power systems where reliable deep discharge performance matters.\u003c\/p\u003e\u003ch2\u003eKey features of this deep cycle battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 90Ah rated at C20 discharge rate, suitable for deep cycle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, Absorbed Glass Mat (AGM), sealed, spill-proof and maintenance-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 12V nominal, compatible with standard 12V system architectures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-discharge\u003c\/strong\u003e, low rate, suitable for seasonal or standby applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas emission\u003c\/strong\u003e, recombinant technology minimises gas emission during normal operation, allowing installation in enclosed spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 22.5 kg, reflecting the lead content of genuine deep cycle construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eAGM deep cycle batteries differ from standard starter batteries in plate thickness and active material density. This range uses thicker plates and higher paste density to deliver sustained energy over a longer discharge period rather than a short burst of current. That makes it appropriate for solar storage, inverter backup and off-grid use where the battery is regularly discharged to 50% or below.\u003c\/p\u003e\u003cp\u003eThe AGM separator holds the electrolyte against the plates, eliminating free liquid. The battery can be mounted in any orientation except inverted, and does not need ventilation for acid fumes under normal conditions. It remains a lead-acid chemistry, though, and should be charged with a compatible multi-stage charger set to AGM parameters. Overcharging or undercharging will shorten service life.\u003c\/p\u003e\u003cp\u003eAt 22.5 kg this is at the upper end of what one person can safely handle, so plan access and fixing arrangements before installing. Multiple units can be connected in parallel or series provided all batteries are the same type, age and state of charge at the time of connection.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolar PV off-grid storage systems with 12V or 24V battery banks.\u003c\/li\u003e\n\u003cli\u003eInverter backup power for domestic or light commercial premises.\u003c\/li\u003e\n\u003cli\u003eMarine house battery banks for lighting, navigation and auxiliary loads.\u003c\/li\u003e\n\u003cli\u003eMotorhome and campervan leisure battery installations.\u003c\/li\u003e\n\u003cli\u003eTelecoms and UPS standby power applications.\u003c\/li\u003e\n\u003cli\u003eRemote monitoring stations and rural off-grid installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 90Ah AGM Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstall and commission with a qualified electrician or competent person familiar with lead-acid systems. Configure the charger or charge controller for AGM chemistry with the correct absorption and float voltages. Secure the battery against movement, particularly in marine or vehicle installations, and confirm any enclosed space meets minimum safety requirements before fitting. Dispose of used batteries through an approved recycling scheme under UK WEEE and battery regulations.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061065543968,"sku":"BAT412800084","price":192.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412800084-1.webp?v=1785510608"},{"product_id":"victron-agm-165ah-telecom-battery","title":"Victron 12V 165Ah AGM Telecom Deep Cycle Battery M8 | BAT412151164","description":"\u003cp\u003eThe Victron 12V 165Ah AGM Telecom battery is a sealed, valve-regulated lead-acid (VRLA) battery built for standby and cyclic duty. It uses M8 threaded insert terminals and offers 165Ah of capacity, making it suitable for telecom infrastructure, off-grid power systems and other installations where a maintenance-free battery is needed.\u003c\/p\u003e\u003ch2\u003eKey features of this Victron 165Ah AGM battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 165Ah.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, AGM (Absorbent Glass Mat), sealed and valve-regulated, no maintenance required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded inserts for secure, high-torque bolted connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycling\u003c\/strong\u003e, deep cycle design for repeated charge and discharge without premature capacity loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e, telecom-specification build for continuous standby and float charge use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation\u003c\/strong\u003e, spill-proof and leak-proof, can be installed in any position except inverted.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGlass mat separators hold the electrolyte in place rather than as free liquid, so there is no water top-up needed and no off-gassing under normal operating conditions. This allows installation in enclosures with limited ventilation, provided the enclosure itself meets the requirements for the application. The telecom designation reflects a higher build standard and cycle life than a standard standby AGM battery, and the M8 terminals give a lower-resistance connection than bolt-on types, useful where vibration or repeated maintenance access is expected.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed in telecom base stations, off-grid solar storage, UPS systems, marine and motorhome house banks, security and access control backup, and industrial standby power. Batteries of this capacity are typically wired into banks for higher voltage or greater total storage, with cable sizing, fusing and battery management specified to suit.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAt 48.8 kg this is a heavy unit; safe handling needs two people or lifting equipment, and the mounting surface or rack must support the full bank weight. Torque M8 terminal bolts to the manufacturer's specification. Do not install in a fully sealed, unventilated space, and do not mix batteries of different ages, capacities or chemistries in the same bank. Pair with a Victron charge controller or inverter-charger set to the correct AGM profile.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066002720,"sku":"BAT412151164","price":329.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412151164-1.webp?v=1785510683"},{"product_id":"agm-deep-cycle-battery-12v-22ah","title":"Victron 12V 22Ah AGM Deep Cycle Battery | BAT212200084","description":"\u003cp\u003eThe Victron 12V 22Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery rated at C20 capacity. It suits solar energy storage, UPS systems and off-grid setups where dependable deep cycle performance is needed in a compact, spill-proof case.\u003c\/p\u003e\u003ch2\u003eKey features of this Victron AGM battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 22Ah rated at C20 discharge rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, AGM (Absorbent Glass Mat), sealed and valve-regulated, no topping up required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle design\u003c\/strong\u003e, built for repeated discharge and recharge without significant capacity loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation\u003c\/strong\u003e, spill-proof and leak-proof, can be installed in any position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 5.9 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Victron chargers, solar charge controllers and inverter\/charger systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the AGM design works\u003c\/h2\u003e\u003cp\u003eA glass mat separator holds the electrolyte in place, so there is no free liquid inside the cell. That makes the battery safe to fit in enclosed spaces, vehicles and cabinets where a flooded battery would not be suitable. The valve-regulated design means no water top-ups and no venting of hydrogen under normal use.\u003c\/p\u003e\u003ch3\u003eC20 rating and cycle use\u003c\/h3\u003e\u003cp\u003eThe 22Ah figure is measured over a 20-hour discharge period. Drawing higher currents over shorter periods reduces the available capacity, which is normal lead-acid behaviour. The plate construction here is built for regular deep discharges rather than standby float duty alone, so pairing it with a Victron MPPT charge controller or Blue Smart charger keeps the correct charge profile applied and protects cycle life.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSmall off-grid solar systems and solar lighting, UPS and backup power for alarms and telecoms, marine auxiliary power, motorhome and caravan leisure use, portable power stations and mobility aids all suit this format.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron 12V 22Ah AGM Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066297632,"sku":"BAT212200084","price":43.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat212200084-1.webp?v=1785510723"},{"product_id":"victron-agm-super-cycle-battery-125ah","title":"Victron 12V 125Ah AGM Super Cycle Battery M8 | BAT412112081","description":"\u003cp\u003eThe Victron Energy AGM Super Cycle 12V 125Ah battery is a deep-cycle lead-acid battery built for applications where regular deep discharging happens as a matter of course. Solar storage, marine house banks and off-grid systems all put standard AGM batteries under strain; this Super Cycle version is designed to tolerate that pattern of use. M8 threaded insert terminals give a secure, vibration-resistant connection for professional installs.\u003c\/p\u003e\u003ch2\u003eKey features of this AGM Super Cycle battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 12V nominal, 125Ah.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, AGM Super Cycle, tolerates deeper and more frequent discharge than standard AGM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded inserts, for bolted cable lugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, sealed AGM, maintenance-free and spill-proof, can be installed in any orientation except inverted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 32.5 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the Super Cycle range exists\u003c\/h2\u003e\u003cp\u003eStandard AGM batteries have a limited number of deep discharge cycles before capacity drops off. The Super Cycle range uses a modified plate design and electrolyte formulation so it can be drawn down to a lower state of charge without the same degree of sulphation and plate degradation. That suits solar systems drawn down daily, or marine and vehicle use where shore power isn't always available.\u003c\/p\u003e\u003ch2\u003eTerminals and setup\u003c\/h2\u003e\u003cp\u003eThe M8 threaded inserts accept standard M8 cable lug bolts, avoiding the terminal damage that over-tightened post-type terminals can suffer, which matters in mobile and marine environments where vibration is constant. Charge with an AGM-rated profile: Victron's own charge controllers and inverter-chargers include AGM presets, and any third-party charger should be set to correct AGM absorption and float voltages.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eOff-grid solar storage, marine house battery banks, motorhome and campervan leisure systems, UPS and backup power, and telecom or remote monitoring equipment on solar charging.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 125Ah AGM Super Cycle Battery (M8 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066461472,"sku":"BAT412112081","price":303.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412112081-1.webp?v=1785510755"},{"product_id":"victron-agm-super-cycle-battery-230ah","title":"Victron 12V 230Ah AGM Super Cycle Battery M8 | BAT412123081","description":"\u003cp\u003eThe Victron Energy AGM Super Cycle 12V 230Ah battery is a deep-cycle lead-acid battery built for applications where regular deep discharge is unavoidable. Standard AGM cells are designed for standby or shallow-cycle duty and lose life quickly once they are regularly taken below 50% state of charge. This Super Cycle version uses a modified plate design and electrolyte formulation so it tolerates repeated discharge to 80% depth of discharge without the accelerated wear seen in conventional AGM batteries. M8 threaded insert terminals give a bolt-down connection suited to professional solar, marine and off-grid installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 12V nominal voltage, 230Ah capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, AGM Super Cycle, valve-regulated, sealed and maintenance-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded insert, accepting M8 bolts directly for a firm connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 61 kg; mounting position and structural support should be planned around this.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Victron chargers and inverter\/chargers, including Super Cycle charge profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eUsable capacity and bank building\u003c\/h2\u003e\u003cp\u003eAt 80% depth of discharge, the 230Ah rating gives roughly 184Ah usable, around 2.2kWh per battery in a 12V system. Units can be paralleled to increase capacity or wired in series pairs for a 24V bank. Victron recommends using identical batteries from the same production batch when paralleling, to keep charging and discharge behaviour balanced across the bank.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar storage with daily deep cycling, marine house battery banks, motorhome and vehicle leisure installations, UPS and backup power systems, and remote telecoms or monitoring sites running on solar charging.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAt 61 kg the battery needs suitable lifting equipment and a structurally sound mounting surface. Install in a ventilated area in line with BS EN 50272 or equivalent local regulations, even though sealed AGM construction produces minimal gas in normal use. Size all wiring for the system's maximum discharge current and protect it with a correctly rated fuse or circuit breaker close to the battery terminal. Connection to charge controllers, inverters or inverter\/chargers should be done by a qualified electrician, and grid-connected battery storage systems must meet G98 or G99 and relevant DNO requirements.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 230Ah AGM Super Cycle Battery (M8 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066658080,"sku":"BAT412123081","price":450.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412123081-1.webp?v=1785510799"},{"product_id":"victron-smart-bms-cl-12-100-for-12v-lifepo4-battery-systems","title":"Victron Smart BMS CL 12-100 12V LiFePO4 Battery Management | BMS110022000","description":"\u003cp\u003eThe Victron Smart BMS CL 12-100 is a battery management system built for 12V LiFePO4 (lithium iron phosphate) installations. It sits between the battery and the rest of a 12V system, protecting cells from overcharge, over-discharge and short circuit while managing a continuous load of up to 100A. It is intended for professional installers working on campervans, boats, vehicles and similar mobile or off-grid setups.\u003c\/p\u003e\u003ch2\u003eKey features of the Victron Smart BMS CL 12-100\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBuilt for 12V LiFePO4 battery systems\u003c\/li\u003e\n\u003cli\u003eContinuous load output rated at 100A\u003c\/li\u003e\n\u003cli\u003eReads cell-level data directly from Victron lithium batteries fitted with an internal BMS cell connector\u003c\/li\u003e\n\u003cli\u003eCharge disconnect output for controlling alternator charging via a DC-DC charger\u003c\/li\u003e\n\u003cli\u003eLoad disconnect output cuts non-essential loads at low state of charge\u003c\/li\u003e\n\u003cli\u003eBluetooth connectivity through the VictronConnect app, plus VE.Bus and VE.Direct integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe unit reads cell voltages through the battery's BMS cell connector port. If any cell reaches its upper or lower limit, it triggers a charge or load disconnect signal to protect the cells. The\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066756384,"sku":"BMS110022000","price":99.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bms110022000-1.webp?v=1785510820"},{"product_id":"victron-agm-38ah-deep-cycle-battery","title":"Victron 12V 38Ah AGM Deep Cycle Battery | BAT412350084","description":"\u003cp\u003eThe Victron Energy 12V 38Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery rated at C20 capacity. It suits solar energy storage, off-grid systems, marine setups and backup power installations that need reliable deep cycling.\u003c\/p\u003e\u003ch2\u003eKey features of this Victron AGM battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 38Ah rated at C20 discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, AGM (Absorbent Glass Mat), sealed and spill-proof, no maintenance required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycling\u003c\/strong\u003e, deep cycle design for repeated charge and discharge use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Victron chargers, MPPT solar charge controllers and inverter\/chargers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation\u003c\/strong\u003e, no free electrolyte, so it can be installed in various positions and in enclosed spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 14.7 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eA glass mat separator holds the electrolyte in place instead of letting it pool freely. That removes the risk of acid spillage, avoids topping up with distilled water, and gives more freedom over how the battery sits during installation.\u003c\/p\u003e\u003cp\u003eDeep cycle construction means the battery is built to be discharged to a significant depth repeatedly, unlike a starter battery tuned for short bursts of current. At 38Ah (C20) it fits small off-grid systems, caravan and motorhome auxiliary power, marine house banks, and UPS or backup applications that see regular cycling.\u003c\/p\u003e\u003cp\u003eIt works within the Victron ecosystem, including Blue Smart IP65 and IP67 chargers, SmartSolar and BlueSolar MPPT charge controllers, and MultiPlus or Phoenix inverter\/chargers. Set the correct AGM charge profile on your charger to get the rated cycle life from it.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall off-grid solar storage systems.\u003c\/li\u003e\n\u003cli\u003eCaravan, motorhome and campervan auxiliary power.\u003c\/li\u003e\n\u003cli\u003eMarine house banks and leisure battery installations.\u003c\/li\u003e\n\u003cli\u003eUPS and backup power systems.\u003c\/li\u003e\n\u003cli\u003ePortable power stations and mobile equipment.\u003c\/li\u003e\n\u003cli\u003eReplacement battery in existing 12V AGM-based systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 38Ah AGM Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit and wire this battery only if you're competent with 12V DC systems. Set the charger or charge controller to an AGM-compatible profile: a gel or flooded profile will shorten its cycle life. When building a bank, match batteries by type, age and capacity, and keep ventilation adequate even though the cells are sealed. For solar PV or inverter integration, use a qualified electrician.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066821920,"sku":"BAT412350084","price":100.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412350084-1.webp?v=1785510827"},{"product_id":"victron-agm-deep-cycle-battery-130ah","title":"Victron 12V 130Ah AGM Deep Cycle Battery | BAT412121084","description":"\u003cp\u003eThe Victron Energy 12V 130Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery built for repeated deep discharge and recharge cycling. It suits solar energy storage, off-grid systems, marine setups and backup power installations that need dependable capacity and long cycle life.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 130Ah rated at C20, a standard benchmark for solar and off-grid sizing calculations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAGM construction\u003c\/strong\u003e, Absorbent Glass Mat design with no free electrolyte, making the battery spill-proof and suitable for enclosed spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle design\u003c\/strong\u003e, supports repeated deep discharge without the accelerated degradation seen in standby batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance-free\u003c\/strong\u003e, sealed construction, no topping up of electrolyte required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 12V nominal, compatible with a wide range of Victron charge controllers, inverter\/chargers and battery monitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 36kg, reflecting the plate mass used in deep cycle construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eAGM deep cycle batteries use thicker plates than standard AGM standby batteries, storing more active material and allowing deeper discharges over more cycles before capacity drops off. That makes them suited to daily cycling in solar storage, where a battery may be discharged and recharged every day for years.\u003c\/p\u003e\u003cp\u003eThe C20 rating of 130Ah means the battery delivers its full rated capacity over a 20-hour discharge period, a figure that maps well onto typical solar and off-grid discharge rates. Faster discharge rates give lower usable capacity, which should be factored into system design. Being sealed and valve-regulated, it does not emit hydrogen gas under normal operating conditions, which widens the range of installation environments compared with flooded lead-acid batteries. It works with Victron's recommended AGM charge profiles, across the full range of Victron MPPT charge controllers and MultiPlus or Quattro inverter\/chargers.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed in solar PV off-grid storage for residential, agricultural and commercial sites, marine house battery banks, motorhome and caravan leisure systems, UPS and backup power setups, and series or parallel battery banks in 24V or 48V off-grid systems.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis battery weighs 36kg, so safe handling needs two people or lifting equipment. Connections should be made by a qualified electrician or experienced installer familiar with lead-acid systems. When building a bank, use batteries of the same type, age and state of charge, and fuse and cable correctly in line with BS 7671. A qualified or MCS-accredited installer should handle solar PV work. Even though this is a sealed AGM battery, adequate ventilation in enclosed compartments is still recommended as a precaution.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 130Ah AGM Deep Cycle Battery (BAT412121084)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061066920224,"sku":"BAT412121084","price":251.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412121084-1.webp?v=1785510846"},{"product_id":"victron-agm-170ah-battery-m8","title":"Victron 12V 170Ah AGM Super Cycle Battery M8 | BAT412117081","description":"\u003cp\u003eThe Victron Energy AGM Super Cycle 12V 170Ah battery is a deep-cycle lead-acid battery built for applications where repeated deep discharges are the norm rather than the exception. It suits solar storage, marine and off-grid systems where a standard AGM unit would wear out under regular deep cycling. M8 threaded insert terminals give a secure, bolt-down connection for professional installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 12V nominal voltage with 170Ah capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Cycle chemistry\u003c\/strong\u003e, tolerates deeper and more frequent discharge cycles than standard AGM batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded inserts for bolt-down cable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, valve-regulated, sealed, maintenance-free, suitable for enclosed spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Victron Energy chargers, inverter\/chargers and battery monitors when set to the correct AGM charge profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 45 kg, so plan for handling and structural support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eStandard AGM batteries have a limited number of deep discharge cycles before capacity drops off. The Super Cycle range uses a modified plate design and electrolyte formulation that allows regular discharges down to 20% state of charge without the same rate of capacity loss, making it a practical option for off-grid systems cycled daily.\u003c\/p\u003e\u003cp\u003eThe M8 threaded inserts accept bolts directly, giving a consistent, torque-controlled connection that holds through vibration, which matters on boats and vehicles. The sealed AGM construction means no acid spillage and no topping up, and it can be installed in any orientation except inverted.\u003c\/p\u003e\u003cp\u003ePair it with a Victron MPPT controller or MultiPlus inverter\/charger set to the AGM Super Cycle profile. A Victron BMV monitor is recommended to track state of charge, since lead-acid batteries need careful management to reach their rated cycle count.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eOff-grid solar storage with daily charge and discharge cycles, marine house battery banks, motorhome and vehicle leisure installations, and backup power systems needing reliable deep-cycle performance.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAt 45 kg this battery needs two people or mechanical assistance to move safely. M8 bolts and cable lugs are required for the terminals and are not supplied. Set charging equipment to the correct AGM Super Cycle parameters before commissioning, and follow local electrical regulations when working with large lead-acid batteries.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 170Ah AGM Super Cycle Battery (M8 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061067247904,"sku":"BAT412117081","price":330.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412117081-1.webp?v=1785510909"},{"product_id":"victron-agm-deep-cycle-battery-14ah","title":"Victron 12V 14Ah AGM Deep Cycle Battery | BAT212120086","description":"\u003cp\u003eThe Victron Energy 12V 14Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery for cyclic applications that need reliable, repeated discharge. Rated at C20 capacity, it suits off-grid, backup and auxiliary power installations where a compact, spill-proof battery is required.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 14Ah rated at the C20 discharge rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAGM construction\u003c\/strong\u003e, sealed, valve-regulated, maintenance-free with no free electrolyte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle design\u003c\/strong\u003e, built for repeated charge and discharge cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, spill-proof and leak-proof, can be mounted in any orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 3.67 kg, suited to portable and space-constrained installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharger compatibility\u003c\/strong\u003e, works with Victron Energy chargers, inverter\/chargers and solar charge controllers set to an AGM profile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eAGM construction uses a glass mat separator to hold the electrolyte in place, removing the risk of acid spillage and allowing installation in enclosed spaces or at angles that would be unsafe for a flooded battery. The valve-regulated design means no topping up with distilled water and no venting of hydrogen under normal operating conditions.\u003c\/p\u003e\u003cp\u003eThe deep cycle rating sets this apart from a standby or starter battery: it can be discharged to a meaningful depth and recharged repeatedly without early capacity loss. For the longest service life, avoid discharging below 50% state of charge and use a charger with an AGM-specific charge profile. Victron's MPPT solar charge controllers and battery chargers include dedicated AGM profiles matching the required absorption and float voltages.\u003c\/p\u003e\u003cp\u003eAt 14Ah (C20) this is a compact unit, better suited to auxiliary, backup and small off-grid roles than primary storage in larger systems. It pairs well with Victron BMV battery monitors, small inverters, and alarm or UPS applications needing a dependable sealed battery.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall off-grid solar systems and solar lighting\u003c\/li\u003e\n\u003cli\u003eAuxiliary and backup power for caravans, motorhomes and boats\u003c\/li\u003e\n\u003cli\u003eUPS and alarm system battery replacement or expansion\u003c\/li\u003e\n\u003cli\u003ePortable power packs and field equipment\u003c\/li\u003e\n\u003cli\u003eVictron-based systems needing a compact AGM battery for auxiliary loads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 14Ah AGM Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSealed and maintenance-free, but still install in a ventilated location as a precaution against gas release under fault conditions. Use a charger or charge controller with a correct AGM profile to avoid overcharging, which shortens battery life. Ensure cable connections are correctly rated and fused close to the terminal. Installation by a qualified electrician or competent person is recommended.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061067477280,"sku":"BAT212120086","price":33.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat212120086-1.webp?v=1785510954"},{"product_id":"victron-agm-deep-cycle-60ah","title":"Victron 12V 60Ah AGM Deep Cycle Battery | BAT412550084","description":"\u003cp\u003eThe Victron Energy 12V 60Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery rated at C20 capacity. It suits repeated deep discharge and recharge cycles in solar, off-grid and backup power systems. The AGM construction is spill-proof, making it suitable for confined or enclosed spaces.\u003c\/p\u003e\u003ch2\u003eVictron AGM battery features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 60Ah rated at C20 discharge rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAGM construction\u003c\/strong\u003e, sealed, valve-regulated, maintenance-free with no free electrolyte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle design\u003c\/strong\u003e, built for repeated partial and full discharge cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting flexibility\u003c\/strong\u003e, spill-proof and leak-proof, allowing varied mounting orientations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e, works with Victron chargers, inverter\/chargers and solar charge controllers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 17.3 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eA glass mat separator holds the electrolyte in place instead of letting it pool freely. This removes the risk of acid spillage and cuts gassing during normal operation, so the battery can go into locations with limited ventilation, such as inside a boat, caravan or battery enclosure.\u003c\/p\u003e\u003cp\u003eThe deep cycle rating means the battery is built to deliver sustained current over longer periods and recover from deeper states of discharge than a starter battery. That matters for solar storage and off-grid systems, where the battery may be drawn down each evening and recharged the next day. The 60Ah figure is a C20 rating, based on a 20-hour discharge to the end-of-discharge voltage; usable capacity varies with discharge rate and temperature.\u003c\/p\u003e\u003cp\u003eThis battery integrates with the Victron ecosystem. Victron MPPT solar charge controllers, MultiPlus and Phoenix inverter\/chargers, and VE.Smart networking include AGM presets matched to the charge profile this battery needs. Correct charger configuration matters for cycle life.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolar energy storage in off-grid and hybrid systems.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat house battery banks.\u003c\/li\u003e\n\u003cli\u003eCaravan and motorhome leisure battery installations.\u003c\/li\u003e\n\u003cli\u003eUPS and backup power systems.\u003c\/li\u003e\n\u003cli\u003eRemote telecommunications and monitoring equipment.\u003c\/li\u003e\n\u003cli\u003eMobile and vehicle-based power systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAGM batteries are sealed and maintenance-free, but installation should be carried out by a qualified electrician or experienced installer. Charge voltage settings on any connected charger or inverter\/charger should be configured for AGM chemistry, as overcharging shortens service life. Marine installations should follow applicable wiring regulations; for solar installations, a qualified installer should size the battery bank, cabling and protection devices correctly.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 60Ah AGM Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061067575584,"sku":"BAT412550084","price":117.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412550084-1.webp?v=1785510966"},{"product_id":"victron-265ah-gel-battery-m8","title":"Victron 12V 265Ah GEL Deep Cycle Battery M8 | BAT412126101","description":"\u003cp\u003eThe Victron Energy 12V 265Ah GEL Deep Cycle Battery is a sealed lead-acid battery built for solar storage, off-grid systems and marine or vehicle use. GEL electrolyte construction makes it maintenance-free and safe to install where ventilation is limited. M8 threaded insert terminals give a secure, vibration-resistant connection for professional installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 265Ah at 12V nominal voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGEL construction\u003c\/strong\u003e, sealed, maintenance-free and spill-proof, no water topping required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded insert type for a firm bolted connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle design\u003c\/strong\u003e, supports repeated charge and discharge cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 73.1kg, requiring two people or mechanical assistance to position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eGEL batteries hold their electrolyte in a silica-based gel, removing the risk of acid spill and cutting gassing during normal use. That makes them suitable inside caravans, boats, battery enclosures and off-grid cabins where a flooded battery would need dedicated venting. GEL cells tolerate slow, deep discharges well but are sensitive to high charge voltages, so a charger with a dedicated GEL profile is essential.\u003c\/p\u003e\u003cp\u003eMultiple units can be connected in parallel to increase capacity, or in series pairs to build a 24V bank. The battery is designed to work within the Victron ecosystem, including MPPT solar charge controllers, MultiPlus and Quattro inverter-chargers, and the Venus GX monitoring platform. Set any charge source to the correct GEL voltage parameters before commissioning.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid solar storage in cabins, outbuildings and remote installations.\u003c\/li\u003e\n\u003cli\u003eMarine house battery banks needing sealed, spill-proof construction.\u003c\/li\u003e\n\u003cli\u003eMotorhome and caravan leisure battery systems.\u003c\/li\u003e\n\u003cli\u003eUPS and backup power systems.\u003c\/li\u003e\n\u003cli\u003eTelecoms and remote monitoring equipment with regular deep discharge cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 265Ah GEL Deep Cycle Battery (M8 terminals)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAt 73.1kg, handle this battery with appropriate lifting equipment or at least two people, and install it on a surface rated to support the weight. Use correctly rated M8 bolts and cable lugs without overtightening the terminals. Configure all charge sources to a GEL-specific charge profile, since voltages set for AGM or flooded batteries can cause damage. Installation in solar PV and off-grid systems should be carried out by a qualified electrician, in line with BS 7671 wiring regulations and any applicable building or marine standards.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061067641120,"sku":"BAT412126101","price":532.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412126101-1.webp?v=1785510979"},{"product_id":"agm-deep-cycle-battery-12v-110ah","title":"Victron 12V 110Ah AGM Deep Cycle Battery M8 | BAT412101085","description":"\u003cp\u003eThe Victron Energy 12V 110Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery built for cyclic use in solar, off-grid and marine systems. It uses M8 threaded insert terminals for a bolted, vibration-resistant connection, and weighs 30kg, making it suited to fixed installations rather than portable setups.\u003c\/p\u003e\u003ch2\u003eKey features of this AGM deep cycle battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 110Ah.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, AGM (Absorbent Glass Mat), sealed and valve-regulated, no electrolyte top-up needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded insert, accepts ring-terminal cables directly for a secure bolted connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle use\u003c\/strong\u003e, designed for repeated charge and discharge, unlike standby or starter batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 30kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Victron MPPT charge controllers, MultiPlus and Phoenix inverter\/chargers when set to an AGM charge profile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe glass mat separator holds the electrolyte in place, so the battery is spill-proof and does not require a dedicated ventilated battery room, though normal ventilation is still recommended. This differs from flooded lead-acid types, which need regular water top-ups. The M8 threaded inserts allow ring-terminal cables to be bolted directly to the battery, giving a lower-resistance connection than clamp-style posts, useful under inverter loads.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits solar off-grid systems paired with MPPT controllers and standalone inverters, narrowboat and marine house battery banks, motorhome and campervan leisure setups, UPS and backup power systems, and multi-battery banks wired in series or parallel.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eHandle with two people or lifting equipment given the 30kg weight. Fit in a stable, ventilated location away from heat and direct sunlight, never in a fully airtight enclosure. Use correctly rated cables with M8 ring terminals, torque fasteners as specified, and set any charger or inverter\/charger to an AGM charge profile. Installation on grid-connected systems should be carried out by a qualified electrician in line with UK wiring regulations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 110Ah AGM Deep Cycle Battery (M8 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061067706656,"sku":"BAT412101085","price":201.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412101085-1.webp?v=1785510993"},{"product_id":"victron-gel-deep-cycle-battery-90ah","title":"Victron 12V 90Ah Gel Deep Cycle Battery | BAT412800104","description":"\u003cp\u003eThe Victron Energy 12V 90Ah Gel Deep Cycle Battery is a sealed, maintenance-free lead-acid battery for cyclic and standby use in solar, off-grid and marine systems. Gel electrolyte construction means no free liquid acid, so it can be fitted where orientation or ventilation is limited. Rated 90Ah at the C20 discharge rate, it suits installers who need dependable storage in demanding conditions.\u003c\/p\u003e\u003ch2\u003eKey features of this deep cycle battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 90Ah rated at the C20 discharge rate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrolyte\u003c\/strong\u003e, gel construction, no free liquid acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycling\u003c\/strong\u003e, deep cycle design for repeated charge and discharge rather than engine-start use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, sealed, valve-regulated (VRLA), no topping up required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 12V nominal, can be wired in series or parallel for 24V or 48V banks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 22.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eGel electrolyte is held in a silica gel matrix rather than as free liquid, which prevents stratification and reduces water loss. This helps cyclic service life compared with conventional wet-cell batteries. The sealed build allows installation on its side if space demands it, though upright remains preferred.\u003c\/p\u003e\u003cp\u003eAt 90Ah it fits small-to-medium off-grid systems, solar storage banks, narrowboat and marine house battery setups, and backup power installations. Gel batteries should not routinely be discharged below 50% depth of discharge, and charge settings must match gel chemistry: an AGM or flooded profile will shorten battery life. Victron MPPT charge controllers and MultiPlus inverter-chargers include a dedicated gel profile.\u003c\/p\u003e\u003cp\u003eUnits can be linked in series for 24V or 48V systems, or in parallel for extra capacity. Match age, capacity and manufacturer across a bank so charging and discharging stay balanced.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolar off-grid storage for homes, farms and remote sites\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat house battery banks needing sealed construction\u003c\/li\u003e\n\u003cli\u003eMotorhome and caravan leisure systems with daily cycling\u003c\/li\u003e\n\u003cli\u003eUPS and backup power needing a maintenance-free sealed battery\u003c\/li\u003e\n\u003cli\u003eTelecoms, security and remote monitoring installations with infrequent access\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 90Ah Gel Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061068067104,"sku":"BAT412800104","price":176.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412800104-1.webp?v=1785511051"},{"product_id":"victron-agm-battery-220ah-m8","title":"Victron 12V 220Ah AGM Deep Cycle Battery M8 | BAT412201085","description":"\u003cp\u003eThe Victron Energy 12V 220Ah AGM Deep Cycle Battery is a sealed, maintenance-free lead-acid battery built for repeated charge and discharge cycles. M8 threaded insert terminals give a secure, torque-controlled connection, and the 220Ah capacity suits off-grid solar, marine and motorhome systems where dependable cycling matters.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 220Ah.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAGM construction\u003c\/strong\u003e, sealed, valve-regulated, no electrolyte top-up needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 threaded inserts for a torque-controlled, low-profile connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle design\u003c\/strong\u003e, built for repeated charge and discharge, unlike starter batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 62.5 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer compatibility\u003c\/strong\u003e, works with the full range of Victron charge controllers, inverter\/chargers and battery monitors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe fibreglass mat inside an AGM battery absorbs and immobilises the electrolyte, removing the risk of acid spillage and allowing installation in any orientation except inverted. That makes it a practical choice for marine, vehicle and enclosed cabinet installations where a flooded battery would not be suitable. Sealed construction means no hydrogen venting under normal conditions, though ventilation in enclosed spaces is still sensible.\u003c\/p\u003e\u003cp\u003eUnits can be wired in parallel for larger 12V banks, or in series-parallel for 24V or 48V systems. Victron's Battery Monitor range can track state of charge across a multi-battery bank.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar storage, marine house battery banks, motorhome leisure systems, and backup power for telecoms or critical equipment. It can also form part of a 12V, 24V or 48V bank when wired in series or parallel.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eAt 62.5 kg, moving and positioning this battery needs two people or mechanical handling equipment. Use correctly sized M8 bolts and the right torque on the terminals; over-tightening risks damage. In a bank, use cables of matched length and cross-section for balanced charging. Charge with an AGM-specific profile rather than a flooded or gel setting, and ventilate enclosed installation spaces.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 220Ah AGM Deep Cycle Battery (M8 threaded terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061068362016,"sku":"BAT412201085","price":439.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412201085-1.webp?v=1785511101"},{"product_id":"victron-165ah-gel-deep-cycle-battery","title":"Victron 12V 165Ah Gel Deep Cycle Battery | BAT412151104","description":"\u003cp\u003eThe Victron Energy 12V 165Ah Gel Deep Cycle Battery is a sealed, maintenance-free VRLA battery built for cyclic and standby duty in solar, off-grid and marine systems. Rated at 165Ah (C20), it gives predictable discharge performance without water topping or acid fumes.\u003c\/p\u003e\u003ch2\u003eKey features of this victron gel battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 165Ah rated at C20 for consistent system sizing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrolyte\u003c\/strong\u003e, gel construction with no free liquid, safe for enclosed or tilted mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed design\u003c\/strong\u003e, valve-regulated, no water topping required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep cycle rating\u003c\/strong\u003e, built for repeated discharge and recharge cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 12V nominal, works with standard 12V charge controllers, inverters and chargers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 48.4kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eGel electrolyte prevents stratification and acid spills, which suits installations that aren't always perfectly upright or well ventilated. Gel chemistry also tends to cope better than flooded lead-acid when left in a partial state of charge, which happens often in weather-dependent solar charging.\u003c\/p\u003e\u003cp\u003eAt 165Ah (C20), usable capacity works out to around 82Ah when discharged to the recommended 50% depth of discharge for cyclic use. Factor this into autonomy calculations. The 12V format allows series wiring for 24V or 48V banks, or parallel wiring to add capacity at 12V.\u003c\/p\u003e\u003cp\u003eGel batteries need a charge profile matched to their chemistry. Charging voltages sit lower than for flooded types, and exceeding them causes permanent damage to the gel structure. Set any charge controller, inverter-charger or standalone charger to the correct Victron gel profile before it's ever connected.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed in solar off-grid battery banks at 12V, 24V or 48V, marine and narrowboat house banks, motorhome leisure installations with limited ventilation, remote telecoms and monitoring equipment on solar or wind charging, and UPS or backup power systems needing a maintenance-free standby battery.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis battery weighs 48.4kg, so two people and lifting equipment are needed for safe handling. Confirm the charge source uses a gel-specific profile, not one intended for flooded or AGM batteries, before connecting. Installation as part of a solar PV or off-grid system should be carried out by a qualified electrician or MCS-accredited installer, with terminal protection and fusing in line with BS 7671.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron Energy 12V 165Ah Gel Deep Cycle Battery\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061068460320,"sku":"BAT412151104","price":330.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412151104-1.webp?v=1785511113"},{"product_id":"victron-agm-super-cycle-battery-15ah","title":"Victron 12V 15Ah AGM Super Cycle Battery M5 | BAT412015081","description":"\u003cp\u003eThe Victron Energy AGM Super Cycle 12V 15Ah battery is a deep-cycle lead-acid battery built for applications where regular, deep discharge is unavoidable. Solar storage, marine and off-grid setups all put standard AGM batteries under strain when cycled daily. This Super Cycle version is designed to hold up better under that repeated use. M5 threaded insert terminals give a secure, vibration-resistant connection.\u003c\/p\u003e\u003ch2\u003eKey features of this Victron AGM battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and capacity\u003c\/strong\u003e, 12V nominal, 15Ah, suited to compact off-grid and backup power installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle tolerance\u003c\/strong\u003e, AGM Super Cycle construction tolerates deeper and more frequent discharge cycles than standard AGM batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M5 threaded inserts allow a firm, bolt-down connection that resists loosening under vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, sealed, valve-regulated (VRLA) design, maintenance-free, mountable in any orientation except inverted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 4.1 kg, practical for portable or space-constrained installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Victron charge controllers and inverter-chargers that support AGM battery profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the design matters\u003c\/h2\u003e\u003cp\u003eStandard AGM batteries lose capacity quickly once they're regularly discharged to 50% or below. The Super Cycle range uses a modified plate design and electrolyte formulation aimed at extending cycle life under that kind of daily use, which suits solar systems where cycling isn't the exception, it's the routine. The M5 threaded inserts also matter in practice: a bolt goes directly into the terminal post, giving consistent torque and a joint that doesn't work loose, which counts for something on a boat or in a moving vehicle.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eAt 12V and 15Ah this is a smaller-format battery: a dedicated control power supply, a lighting circuit battery, or one unit in a parallel bank where space per unit is tight. Typical uses include marine auxiliary power, caravan and motorhome leisure supply, UPS and backup power for telecoms or alarms, and control power within larger inverter installations. Use with Victron MPPT charge controllers and MultiPlus inverter-chargers on the AGM or AGM Super Cycle charge profile.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit and wire this battery through a qualified electrician or experienced installer. Set the charge source to an AGM or AGM Super Cycle profile to avoid overcharging. Mount in any orientation except fully inverted. When wiring multiple units in parallel, use equal cable length and cross-section for balanced charging, and don't mix batteries of different age, capacity or chemistry in one bank.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Energy 12V 15Ah AGM Super Cycle Battery (M5 terminals)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061068558624,"sku":"BAT412015081","price":35.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat412015081-1.webp?v=1785511137"},{"product_id":"victron-m8-connector-cable-5m","title":"Victron M8 Circular Connector 3 Pole Cable 5m Bag of 2 | ASS030560500","description":"\u003cp\u003eThis Victron Energy cable uses the M8 circular connector format with a 3-pole male to female fitting, supplied at 5 metres per cable and packed as a bag of two. It is intended for BMS and battery management wiring on Victron battery systems, giving installers a standardised, keyed low-voltage connection between components that are not mounted side by side.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type\u003c\/strong\u003e, M8 circular, 3-pole, male\/female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length\u003c\/strong\u003e, 5 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity\u003c\/strong\u003e, 2 cables per bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.25kg per bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN\u003c\/strong\u003e, 8719076019893\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU\u003c\/strong\u003e, ASS030560500\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe threaded locking collar on the M8 connector keeps the cable seated where vibration is a factor, which suits marine installations and mobile battery builds as well as fixed enclosures. At 5 metres it reaches between a BMS unit and a battery bank that sit apart within a larger cabinet, and having two cables in the pack covers installations with a second parallel string or a spare run kept on hand.\u003c\/p\u003e\u003cp\u003eThese cables carry the connections used for Victron BMS communication and control wiring and are not rated for mains voltage. Installation should be carried out by a qualified electrician or experienced Victron installer, with pole orientation checked before connecting.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2 x M8 circular connector male\/female 3-pole cables, each 5 metres\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52061068689696,"sku":"ASS030560500","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ass030560500-1.webp?v=1785511159"},{"product_id":"victron-m8-bms-cable-3m-pack","title":"Victron M8 3 Pole BMS Connector Cable 3m | Bag of 2 ASS030560300","description":"\u003cp\u003eA Victron Energy M8 circular connector cable with male and female 3-pole ends, supplied in a 3-metre length. It's built for wiring between Victron Battery Management Systems and compatible BMS accessories, giving installers a pre-terminated cable rather than one assembled on site.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector format\u003c\/strong\u003e, M8 circular, 3-pole, male and female ends on one cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length\u003c\/strong\u003e, 3 metres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack size\u003c\/strong\u003e, bag of 2 cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 0.158 kg per bag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTermination\u003c\/strong\u003e, pre-terminated connectors, no field crimping or soldering required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGTIN\u003c\/strong\u003e, 8719076019886.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed for signal and low-voltage BMS wiring between Victron BMS units and battery modules in lithium battery installations. Suits multi-battery string setups where each string needs its own BMS connection, and battery enclosures where the BMS sits some distance from the battery bank. Also used in off-grid, backup power, marine and vehicle systems built around Victron lithium battery banks.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 x M8 circular connector male\/female 3-pole cables, each 3 metres long.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit by a qualified electrician or battery system installer familiar with Victron BMS wiring. Check compatibility with the specific Victron BMS model before fitting, and make sure connectors are fully seated and locked before commissioning. These cables are for signal and low-voltage BMS use only, not mains voltage or high-current power connections.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095394447648,"sku":"ASS030560300","price":30.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ass030560300-1.webp?v=1785748324"},{"product_id":"lifepo4-battery-12v-100ah-victron","title":"Victron Lithium SuperPack 12.8V 100Ah LiFePO4 Battery M8 | BAT512110712","description":"\u003cp\u003eThe Victron Lithium SuperPack 12.8V 100Ah is a self-contained LiFePO4 battery built for marine, mobile and off-grid systems where a drop-in lithium replacement for lead-acid is needed. An integrated Battery Management System sits inside the case, so single-battery installations need no external BMS hardware.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 12.8V nominal, 100Ah, giving 1.28kWh usable energy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, Lithium Iron Phosphate (LiFePO4), a stable, thermally safe cell chemistry with a long cycle life compared to lead-acid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated BMS\u003c\/strong\u003e, handles cell balancing, over-charge, over-discharge and short-circuit protection without external components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, M8 bolted connections for secure, high-current professional wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 10.5kg, lighter than an equivalent lead-acid battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works within the wider Victron Energy ecosystem, including MPPT charge controllers and MultiPlus inverter\/chargers when configured correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe SuperPack range differs from Victron's Smart Lithium batteries in that the BMS sits fully inside the casing. There's no external BMS, no extra cabling between battery and protection board, and no VE.Bus or VE.Direct BMS communication needed for basic operation. For single-battery installations or straightforward 12V systems, that shortens the bill of materials and the wiring time.\u003c\/p\u003e\u003cp\u003eThe M8 terminal variant uses M8 bolt connections, standard in professional DC wiring and compatible with most marine and vehicle cable lugs. Set your charge source to a LiFePO4 charge profile before connecting.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eMarine house battery banks on sailing yachts, motorboats and narrowboats. Motorhome and campervan leisure systems. Off-grid cabins and remote 12V DC installations. Lead-acid replacement in existing 12V solar storage systems, and lightweight energy storage for mobile work vehicles.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Victron Lithium SuperPack 12.8V 100Ah battery (M8 terminals)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eCharge this battery only with a charger or charge controller set to a LiFePO4 profile, never a lead-acid one. The integrated BMS gives cell-level protection but does not replace correct system design: fusing, cable sizing and charge source compatibility all need checking before installation. On a solar PV system or a vessel's electrical system, connection by a qualified electrician or accredited installer is recommended. The SuperPack is not designed for series connection to raise voltage. Parallel connection to raise capacity is possible if carried out following Victron's published guidance for this battery series.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095395299616,"sku":"BAT512110712","price":424.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat512110712-1.webp?v=1785748406"},{"product_id":"victron-lifepo4-180ah-smart-battery","title":"Victron LiFePO4 Battery 12.8V 180Ah Smart | BAT512118610","description":"\u003cp\u003eThe Victron LiFePO4 12.8V 180Ah Smart is a lithium iron phosphate drop-in battery for 12V solar, off-grid and marine systems. It has integrated Bluetooth monitoring through the VictronConnect app, so state-of-charge and cell data can be checked without extra monitoring hardware.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e, LiFePO4 (Lithium Iron Phosphate), a stable cell type suited to cyclic use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth\u003c\/strong\u003e, built-in, connects directly to the VictronConnect app for voltage, current, state-of-charge and temperature readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal voltage\u003c\/strong\u003e, 12.8V, a direct replacement for 12V lead-acid battery banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e, 180Ah, giving 2,304Wh of usable energy at nominal voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated BMS handles cell balancing plus over-charge, over-discharge, over-temperature and short-circuit protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 20.5kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eLiFePO4 offers a flatter discharge curve and better tolerance of partial state-of-charge cycling than other lithium chemistries. The 12.8V nominal voltage matches standard 12V system wiring and charge controller configurations, so no voltage conversion is needed.\u003c\/p\u003e\u003cp\u003eThe Smart designation refers to the built-in Bluetooth module. Through the VictronConnect app on iOS or Android, installers and users can read live state of charge, voltage, current and cell temperature data. This is useful during commissioning and for diagnostics in awkward locations such as boat bilges, motorhome battery compartments or off-grid cabins.\u003c\/p\u003e\u003cp\u003eThe internal BMS manages cell-level protection on its own, disconnecting load or charger if any cell goes outside safe voltage, temperature or current limits. Systems that need communication between the BMS and a Victron inverter\/charger or MPPT may require a VE.Bus BMS or a compatible external BMS interface, depending on the system design.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed in 12V off-grid solar storage for cabins, sheds and remote sites; marine and narrowboat house battery banks; motorhome, campervan and caravan leisure battery replacement; backup power with Victron Phoenix or MultiPlus inverter\/chargers; portable power stations; and as a lead-acid replacement in existing 12V solar installations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x Victron LiFePO4 12.8V 180Ah Smart battery\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or experienced solar installer familiar with lithium systems. A charger or charge controller with a lithium-specific charge profile is required; lead-acid, AGM or gel settings must not be used. On a Victron MultiPlus or Quattro, the charge algorithm needs to be set correctly, and where BMS-controlled charge management is required, a compatible BMS communication interface should be used. The battery should be kept within its specified temperature range with adequate ventilation, and marine installations should be checked against relevant marine electrical standards.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52095395561760,"sku":"BAT512118610","price":636.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bat512118610-1.webp?v=1785748465"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/victron-lithium-agm-batteries.oembed?page=2","provider":"LED \u0026 Solar","version":"1.0","type":"link"}