{"title":"AC Dimmable Power Supplies","description":"\u003cp\u003eAC dimmable power supplies convert mains voltage into a controlled output for LED arrays that need to work with a standard wall dimmer. They cover the driver ratings installers ask for most, from 15W up to 44W, in both constant current and constant voltage formats.\u003c\/p\u003e\u003cp\u003eThis range includes TRIAC dimmable drivers from EUCHIPS and Meanwell alongside non-dimmable options such as the Philips Xitanium, so you can match the driver to the fitting and the dimming method already installed. Constant current models like the Glacial Power and Boke units suit fixed-output LED arrays, while TRIAC versions are built for compatibility with existing dimmer switches.\u003c\/p\u003e\u003cp\u003eTrade buyers use this category to find the right driver topology for a retrofit or new install without over-specifying wattage. Each listing states its wattage and current rating so you can match it directly to the LED array it will power.\u003c\/p\u003e","products":[{"product_id":"triac-dimmable-led-driver-45w","title":"45W AC Triac Dimmable LED Driver 230V Constant Current | Euchips","description":"\u003cp\u003eThe Euchips EUP45T-1WMC-0 is a constant current mode LED driver built for indoor lighting that needs smooth, flicker-free dimming. It runs from a 230V AC mains supply and works with both leading-edge (Triac) and trailing-edge (ELV) dimmers, so it drops into most existing dimming setups without extra gear.\u003c\/p\u003e\u003ch2\u003eConstant current led driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable output current\u003c\/strong\u003e, 500\/700\/900\/1050mA, set via the built-in DIP switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimmer compatibility\u003c\/strong\u003e, works with leading-edge (Triac) and trailing-edge (ELV) dimmers, including systems from Philips, Panasonic, Lutron, Simon, ABB and Siemens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 40VAC to 240VAC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 87%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, built-in active PFC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, Class 2 power supply with a fully protective plastic enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit, overload and over-temperature protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to indoor LED fittings that need reliable dimming, such as downlights, spotlights and panel lights. The DIP switch current selection means one driver can cover several fitting types on a job, cutting down the number of SKUs an installer needs to stock.\u003c\/p\u003e\u003ch3\u003eDimming performance\u003c\/h3\u003e\u003cp\u003eSmooth, flicker-free operation across the stated dimming range makes it a straightforward swap where an existing Triac or ELV dimmer needs to control constant current LED loads.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52096610271520,"sku":"770022","price":25.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770022-1.webp?v=1785761712"},{"product_id":"constant-current-led-driver-33w","title":"LED Driver Constant Current 33.6W IP67 33-48VDC | Glacial GP-HS35P-48C","description":"\u003cp\u003eThe Glacial GP-HS35P-48C is a constant current LED driver rated at 33.6 watts, supplying a variable voltage output from 33 to 48Vdc. It suits LED spots, downlights, panels and general LED arrays that need a steady current supply.\u003c\/p\u003e\u003ch2\u003eKey features of this constant current LED driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, universal AC input 90~305VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation\u003c\/strong\u003e, constant voltage \/ constant current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e, for high brightness light-emitting diode products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFC\u003c\/strong\u003e, built-in power factor correction function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, fully isolated plastic case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, OVP \/ SCP \/ OTP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperating conditions\u003c\/h2\u003e\u003cp\u003eThe driver runs at full load across an operating range of -20°C to 50°C. It is classed as a Class 2 power supply unit and carries an IP67 rating, making it suitable for waterproof installations.\u003c\/p\u003e\u003ch3\u003eDimensions\u003c\/h3\u003e\u003cp\u003eThe unit measures 110 x 73.5 x 33 mm (L x W x H).\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFit this driver where LED spots, downlights or panels need a constant current supply across a 33-48Vdc range, indoors or in wet locations thanks to the IP67 housing.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096611090720,"sku":"GP-HS35P-48C","price":30.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-gp-hs35p-48c-1.webp?v=1785761833"},{"product_id":"led-triac-driver-58w-dimmable","title":"AC Triac LED Driver 58W IP66 Mains Dimmable | Ledison","description":"\u003cp\u003eThis 58W AC Triac LED driver gives a constant current output for indoor LED fittings that need mains dimming. It is IP66 rated and housed in an aluminium enclosure, with one side wired to the mains supply and the other feeding DC voltage to the connected LED array.\u003c\/p\u003e\u003ch2\u003eConstant current led driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, 58W rated output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 25-42Vdc, 1400mA constant current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 180-240VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, 0.95 P.F. with active power factor correction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak efficiency\u003c\/strong\u003e, 90% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, TUV, CE and EMC certified for indoor lighting use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimmer compatibility\u003c\/h2\u003e\u003cp\u003eBuilt to work smoothly with trailing edge and leading edge switches, this driver has been tested with Varilight Vcom, Varilight VPro, Lutron dimmers and the Clipsal C-Bus system. It suits installations where a single driver needs to pair with a range of existing wall dimmers.\u003c\/p\u003e\u003ch2\u003eMechanical dimensions\u003c\/h2\u003e\u003cp\u003eThe unit measures 200 x 70 x 46mm and weighs 0.9kg. Other output versions of this driver are available on request.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cp\u003eSuited to indoor LED lighting projects that call for constant current dimming, including retrofits where an existing triac dimmer needs to stay in place.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096611778848,"sku":"770013","price":32.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770013-1.webp?v=1785762015"},{"product_id":"led-dimmable-driver-700ma-25w","title":"Meanwell PCD-25-700B LED Dimmable Driver 25W 700mA","description":"\u003cp\u003eThe Meanwell PCD-25-700B is a mains dimmable LED driver rated at 25W, delivering a constant current of 700mA. It runs on an AC triac input of 220-240VAC and controls LED arrays between 24-36VDC without flickering, using trailing and leading edge dimmer switches wired directly to the mains.\u003c\/p\u003e\u003ch2\u003eKey features of this led dimmable driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower output\u003c\/strong\u003e, 25W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant current\u003c\/strong\u003e, 700mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 220-240VAC AC triac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage range\u003c\/strong\u003e, 24-36VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical efficiency\u003c\/strong\u003e, 81%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, single-stage PFC topology, PF≧0.9, complies with EN61000-3-2 Class C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned to work with LED tubes (T8\/T5), PLG24 lamps, PLL2G11 fittings and any LED light that can run from a 700mA constant current driver.\u003c\/p\u003e\u003ch2\u003eManufacture and standards\u003c\/h2\u003e\u003cp\u003ePCD power supplies are made by Mean Well for the indoor lighting market. The 25W version, along with the 16W model, suits leading edge and trailing edge AC-TRIAC dimmers, and is built for two global utility inputs: 115VAC (90~135VAC) type A and 230VAC (180~295VAC) type B. The single-stage power factor correction topology keeps current harmonics within the limits set for LED lighting equipment.\u003c\/p\u003e","brand":"Meanwell","offers":[{"title":"Default Title","offer_id":52096635306272,"sku":"770037","price":25.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770037-1.webp?v=1785763414"},{"product_id":"philips-xitanium-44w-led-driver","title":"44W LED Driver Constant Current Non-Dimmable | Philips Xitanium","description":"\u003cp\u003eThe Philips Xitanium 44W LED driver is a constant current power supply built for professional lighting fixtures. It runs a fixed output current across a 30 to 42V DC range, with a maximum output voltage of 60V, and takes 220 to 240V AC mains input (operational range 202 to 254V) at 50 or 60Hz.\u003c\/p\u003e\u003ch2\u003eKey features of the Philips Xitanium 44W LED driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, selectable via DIP switch between 0.9A, 0.95A, 1.0A and 1.05A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 30 to 42V DC, maximum 60V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 220 to 240V AC, 50\/60Hz, input current 0.24A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 89%, power factor 0.9 or higher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRipple current\u003c\/strong\u003e, below 1%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, non-dimmable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHoused in a compact IP20 enclosure measuring 108 x 68 x 32mm and weighing around 134g, this driver is rated for operation between -20°C and +50°C and has a stated lifetime of up to 50,000 hours. It is intended for indoor use only, in a well-ventilated location that allows heat to dissipate properly.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe driver suits LED downlights and spotlights, LED panels, and general commercial lighting in offices, retail units, public buildings and architectural installations. Its selectable current settings make it adaptable to a range of LED modules within professional luminaires.\u003c\/p\u003e\u003ch3\u003eInstallation note\u003c\/h3\u003e\u003cp\u003eFit this driver indoors only. Installation should be carried out by a qualified electrician, with attention paid to ventilation around the unit for correct heat dissipation.\u003c\/p\u003e","brand":"Philips","offers":[{"title":"Default Title","offer_id":52096661618976,"sku":"770033","price":13.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770033-1.webp?v=1785765995"},{"product_id":"led-driver-15w-triac-dimmable","title":"15W LED Dimmable Driver TRIAC Constant Current | Euchips EUP15T-1HMC-0","description":"\u003cp\u003eThe Euchips EUP15T-1HMC-0 is a 15W constant current LED driver built for indoor dimming installations. It supports both leading edge (TRIAC) and trailing edge (ELV) dimmers, giving smooth control without flicker.\u003c\/p\u003e\u003ch2\u003eLed dimmable driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, selectable via DIP switch between 350mA, 400mA, 450mA and 500mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 40VAC to 240VAC, compatible with dimmers from Philips, Panasonic, Lutron, ABB and Siemens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, greater than 0.95, with efficiency up to 77%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit, overload and over temperature protection with automatic recovery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, Class II, fully enclosed plastic casing for indoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis driver suits downlights, spotlights and panel lights in residential and commercial fit-outs where TRIAC or ELV dimming control is required.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe DIP switch selection lets installers match output current to the connected LED fitting on site, without needing separate driver variants for each current level.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52096673284384,"sku":"770016","price":18.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770016-1.webp?v=1785766659"},{"product_id":"led-driver-18w-constant-current-boke","title":"Boke LED Driver 18W Constant Current 350mA | BK-PDL016-450A","description":"\u003cp\u003eThe Boke LED Driver is an 18Watt constant current power supply built for low-power downlights, spotlights, round panel lights and general LED arrays. It outputs 27-42VDC at 0.45A, suiting fittings that call for a steady constant current rather than constant voltage.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e, BK-PDL016-450A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 200-240VAC, 0.15A, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 27-42VDC, 0.45A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax output voltage\u003c\/strong\u003e, 50Vdc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant current\u003c\/strong\u003e, 350mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to downlights, LED panels, spotlights and T8 or T5 tubes that need a constant current driver rather than a fixed voltage supply. Its low output current makes it a fit for smaller fittings where a single low-power LED array needs a steady drive current.\u003c\/p\u003e\u003ch3\u003eWiring notes\u003c\/h3\u003e\u003cp\u003eConnect within the stated input range of 200-240VAC. Output stays within 27-42VDC, and the driver will not exceed 50Vdc even under varying load, which protects the connected LED array.\u003c\/p\u003e","brand":"Boke","offers":[{"title":"Default Title","offer_id":52096677773600,"sku":"BK-PDL16-0450A","price":16.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bk-pdl16-0450a-1.webp?v=1785766927"},{"product_id":"euchips-30w-triac-dimmable-driver","title":"LED Dimmable Driver 30W TRIAC Constant Current | Euchips EUP30T-1HMC-0","description":"\u003cp\u003eThe Euchips EUP30T-1HMC-0 is a 30W constant current LED driver built for dimmable lighting circuits. It supports both TRIAC (leading edge) and ELV (trailing edge) dimmers, so it works with the control gear already fitted in most homes and offices.\u003c\/p\u003e\u003ch2\u003eKey features of this led dimmable driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, selectable from 550mA to 900mA via a built-in DIP switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 9 to 42V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 220 to 240V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, greater than 0.9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 82%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent accuracy\u003c\/strong\u003e, ±5%\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimming performance\u003c\/h2\u003e\u003cp\u003eThe dimming voltage range runs from 40VAC to 240VAC, and the driver has been tested for compatibility with dimmers from Philips, Panasonic, Lutron, ABB and Siemens. This gives flicker-free control and stable output across that range.\u003c\/p\u003e\u003ch2\u003eProtection and build\u003c\/h2\u003e\u003cp\u003eThe driver includes protection against short circuit, overload and over temperature, with automatic recovery once conditions return to normal. It operates between -20°C and +50°C, and comes in a fully enclosed plastic housing with a Class 2 power supply design.\u003c\/p\u003e\u003ch3\u003eDimensions and weight\u003c\/h3\u003e\u003cp\u003eThe unit measures 185 x 42.5 x 28.5mm and weighs 150g.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED downlights, spotlights, panel lights and architectural fittings in residential and commercial installations.\u003c\/p\u003e\u003ch3\u003eInstallation note\u003c\/h3\u003e\u003cp\u003eThis driver is for indoor use only. If fitted outdoors it needs a suitable waterproof enclosure, and good ventilation is recommended around the unit.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52096684065056,"sku":"770017","price":27.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770017-1.webp?v=1785767186"},{"product_id":"40w-constant-current-dimmable-driver","title":"40W LED Dimmable Driver Constant Current TRIAC\/ELV | Euchips","description":"\u003cp\u003eThe Euchips EUP45T-1HMC-0 is a 40W constant current LED driver built for TRIAC and ELV phase-cut dimming. It suits residential and commercial lighting where smooth, flicker-free control matters, and its output current can be set on site rather than fixed at the factory.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e: adjustable from 300mA to 1400mA via DIP switch, with a current tolerance of ±5%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e: 3V to 65V DC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput supply\u003c\/strong\u003e: 200 to 240V AC, 47 to 63Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e: TRIAC and ELV, leading and trailing edge, 0 to 100% range, flicker-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e: ≥0.93, with active PFC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e: up to 80%.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and build\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eShort circuit, overload and over temperature protection, each recovering automatically once the fault clears.\u003c\/li\u003e\n\u003cli\u003eClass II construction in a fully enclosed housing.\u003c\/li\u003e\n\u003cli\u003eIP20 rated, for indoor use, with an operating range of -40°C to +60°C.\u003c\/li\u003e\n\u003cli\u003eDimensions 171.5 x 54 x 20mm, weight approximately 225g.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuits LED downlights, spotlights, panel and ceiling lights, and decorative or architectural fittings in residential and commercial installations.\u003c\/p\u003e\u003ch2\u003eInstallation note\u003c\/h2\u003e\u003cp\u003eThis driver is for indoor use only. Fit it in a well-ventilated position and have installation carried out by a qualified electrician.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52097077084448,"sku":"770008","price":21.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770008-1.webp?v=1785769734"},{"product_id":"led-driver-20w-triac-dimmable","title":"20W TRIAC Dimmable LED Driver Constant Current | Euchips EUP20T-1HMC-0","description":"\u003cp\u003eThe Euchips EUP20T-1HMC-0 is a 20W constant current LED dimmable driver built for indoor lighting circuits that need smooth TRIAC or ELV control. It works with leading edge and trailing edge dimmers, and the output current is set on site using a built-in DIP switch rather than fixed at the factory.\u003c\/p\u003e\u003ch2\u003eLed dimmable driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming type\u003c\/strong\u003e, TRIAC (leading edge) and ELV (trailing edge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable output\u003c\/strong\u003e, 350mA to 700mA via DIP switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 9 to 40V DC, max 48V no load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 220 to 240V AC, 50\/60Hz, dimming range 40VAC to 240VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, ≥0.95, efficiency up to 81%, current accuracy ±5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit, overload and over temperature protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility extends across dimmer systems from Philips, Panasonic, Lutron, ABB and Siemens, so it slots into existing residential and commercial dimming setups without needing a matched dimmer brand.\u003c\/p\u003e\u003ch2\u003eBuild and housing\u003c\/h2\u003e\u003cp\u003eThe driver uses a Class 2 power supply design in a fully enclosed housing, rated IP20. It is intended for indoor use only; if it needs to go outdoors it should sit inside a suitable waterproof enclosure, with ventilation kept clear to maintain performance.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLED downlights\u003c\/li\u003e\n\u003cli\u003eLED spotlights\u003c\/li\u003e\n\u003cli\u003eLED panel lights\u003c\/li\u003e\n\u003cli\u003eDecorative and architectural lighting\u003c\/li\u003e\n\u003cli\u003eResidential and commercial installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications summary\u003c\/h2\u003e\u003cp\u003eModel EUP20T-1HMC-0, up to 20W power, dimensions 150 x 43 x 29mm, weight approximately 130g, operating temperature -20°C to +50°C, lifetime up to 50,000 hours.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52097077772576,"sku":"770024","price":23.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770024-1.webp?v=1785769854"},{"product_id":"led-dimmable-driver-triac-elv","title":"60W Constant Current LED Dimmable Driver TRIAC\/ELV | Euchips EUP45T-1HMC-0","description":"\u003cp\u003eThe Euchips EUP45T-1HMC-0 is a constant current LED driver built for phase-cut dimming, supporting both leading edge (TRIAC) and trailing edge (ELV) dimmer types. Output current is adjustable from 0.6A to 2.1A using onboard DIP switches, letting installers match the driver to different LED loads without stocking multiple fixed-output units.\u003c\/p\u003e\u003ch2\u003eKey features of this led dimmable driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e - 0.6A to 2.1A, selectable via DIP switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e - 3V to 65V DC, depending on the current setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e - 200 to 240V AC, 47 to 63Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e - TRIAC and ELV, leading and trailing edge phase cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e - up to 83%, power factor of 0.98 or higher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e - short circuit, over current and over temperature, with automatic recovery once the fault clears\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild and housing\u003c\/h2\u003e\u003cp\u003eThe driver carries an IP20 rating, so it is meant for indoor use, and sits inside a fully enclosed plastic housing built to Class II standard. Cooling is by free air convection, with no fan. Operating temperature runs from -40°C to +60°C. It measures 192.5 x 62 x 24mm and weighs approximately 0.30kg.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits LED downlights and spotlights, panel and ceiling lights, architectural and decorative fittings, and signage, anywhere a dimmable constant current supply is needed across residential or commercial work.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52097078788384,"sku":"770009","price":24.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770009-1.webp?v=1785769955"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/triac-dimmable-led-drivers.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}