{"title":"Three-Phase Hybrid Inverters","description":"\u003cp\u003eThree-phase hybrid inverters combine solar charging, battery storage and grid connection in one unit, giving continuous power to a property or site even when the grid fails. They draw from solar, mains AC and battery power as needed, switching automatically so critical loads stay running through the night or during an outage.\u003c\/p\u003e\u003cp\u003eThis range covers both 48V and high-voltage battery systems, from 10kW units for smaller commercial or larger domestic installs up to 50kW models for bigger three-phase sites. Several, including the Voltacon and Conversol units, carry IP65 ratings for outdoor or less protected installation locations.\u003c\/p\u003e\u003cp\u003eBuyers are typically installers specifying systems for properties or businesses with three-phase supply who want programmable power source priority and reduced reliance on grid electricity. Options differ in power output, battery voltage compatibility and enclosure rating, so match the inverter to the battery bank and site conditions before ordering.\u003c\/p\u003e","products":[{"product_id":"solis-10kw-hybrid-inverter-hv-battery","title":"Solis 10kW Three-Phase Hybrid Inverter HV Battery | RHI-3P10K-HVES-5G","description":"\u003cp\u003eThe Solis RHI-3P10K-HVES-5G is a 10kW three-phase hybrid solar inverter built for high-voltage lithium battery systems, including the Pylontech Force H2. Running the battery bank at 500-600V rather than a conventional 48V cuts current through the circuit, which lowers cabling losses and lets the battery connection run without a fan. Maximum efficiency reaches 98.4%, and the unit includes dual MPPT tracking, AFCI arc-fault protection, and an intelligent energy management system.\u003c\/p\u003e\u003ch2\u003eKey features of this three-phase hybrid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 10kW three-phase, for on-grid, off-grid, and backup operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, high-voltage DC, 500-600V typical, suited to Pylontech Force H2 and similar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT\u003c\/strong\u003e, 2 trackers with 4 DC inputs, up to 26A per MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC backup\u003c\/strong\u003e, up to 10kW continuous, 16kVA peak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSource switching\u003c\/strong\u003e, automatic transfer within 40ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated AFCI arc-fault detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the energy management works\u003c\/h2\u003e\u003cp\u003eThe EMS coordinates PV, battery, grid, and load in real time, with three operating modes: self-consumption, time-of-use, and off-grid backup. On a time-of-use tariff it can draw from the battery when grid rates are high and recharge from the grid when rates drop, alongside standard peak shaving. The 40ms switching time keeps disruption to critical loads short when the source changes between grid, solar, and battery.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eAimed at commercial three-phase installations pairing solar generation with high-voltage battery storage, particularly where time-of-use optimisation or peak shaving is part of the design. It also suits larger residential or commercial systems built around Pylontech Force H2 or equivalent HV battery packs.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is high-voltage DC equipment and must be installed by a qualified electrician or MCS-accredited solar installer, in line with BS EN 62619, IEC 62619, and local wiring regulations. Three-phase grid connection requires a G99 application and DNO approval. Cabling, isolators, and protection devices must be rated for the battery system voltage in use.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053948072224,"sku":"RHI-3P10K-HVES-5G","price":1569.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-rhi-3p10k-hves-5g-1.webp?v=1785424077"},{"product_id":"three-phase-hybrid-inverter-15kw-48v","title":"Hybrid 15kW Three-Phase Solar Inverter 48V | Voltasol","description":"\u003cp\u003eThe Voltasol 15kW is a three-phase hybrid solar inverter built for on-grid and off-grid use with battery energy storage. It runs on a 48V DC battery input, uses dual MPPT with up to 22.5kW of PV input, and works with Pylontech lithium and lead-acid batteries. A three-phase energy meter, Wi-Fi card, and Modbus card are supplied as standard, and the unit can be expanded to 90kW when units are paralleled.\u003c\/p\u003e\u003ch2\u003eKey features of this three phase hybrid solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 15kW three-phase, with grid-tie, off-grid, and grid-tie with backup modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input\u003c\/strong\u003e, dual MPPT, up to 22.5kW across 4 inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC, compatible with Pylontech US2000C, US3000C, US5000C and lead-acid batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging current\u003c\/strong\u003e, user adjustable up to 300A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units for 90kW total output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications\u003c\/strong\u003e, USB, RS-232, Modbus, SNMP, plus included Wi-Fi card and three-phase energy meter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis inverter suits commercial and large residential installations that need a high-output hybrid system with battery backup. Solar generation, battery storage, and grid connection sit in one unit, which helps maximise self-consumption and gives backup power during grid outages.\u003c\/p\u003e\u003cp\u003eThe 22.5kW maximum PV input allows the solar array to be sized larger than the inverter's rated output, useful during lower irradiance periods. A 300A maximum charging current supports fast charging of a large Pylontech or lead-acid battery bank from either solar or grid.\u003c\/p\u003e\u003cp\u003eUp to 6 units can run in parallel to build three-phase systems as large as 90kW, without stepping up to a single larger inverter. The communication boards needed for parallel operation come included.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge residential and commercial three-phase hybrid solar PV and battery storage systems\u003c\/li\u003e\n\u003cli\u003eOn-grid installations that need battery backup during power outages\u003c\/li\u003e\n\u003cli\u003eOff-grid commercial and agricultural sites requiring three-phase power\u003c\/li\u003e\n\u003cli\u003eInstallations where expansion beyond 15kW is planned\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is a three-phase hybrid inverter and must be installed by a qualified electrician or MCS-accredited solar installer. Battery storage systems should follow BS EN 62619 and local building regulations, and three-phase grid connection requires a G99 application with DNO approval. Correct cable sizing, fusing, isolators, surge protection, and earthing all need to be in place. This is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053960687904,"sku":"9990210","price":3417.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-9990210-1.webp?v=1785424899"},{"product_id":"three-phase-hybrid-inverter-15kw-ip65","title":"Infini Solar 15kW Three-Phase Hybrid Inverter IP65 48V | Voltacon","description":"\u003cp\u003eThe Infini Solar WP 15kW is a three-phase hybrid solar inverter built for outdoor installation in demanding conditions. It carries an IP65 rating and operates from -25°C to +60°C, with 150% unbalanced load support and parallel operation for up to 6 units.\u003c\/p\u003e\u003ch2\u003eKey features of this three-phase hybrid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 15kW three-phase, supporting on-grid, off-grid and grid-tie with backup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP65 waterproof and dustproof housing for direct outdoor mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating range\u003c\/strong\u003e, -25°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnbalanced load support\u003c\/strong\u003e, 150% across three phases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC with MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications\u003c\/strong\u003e, built-in Wi-Fi, RS485 BMS, Modbus card and energy meter included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe WP designation marks this as the outdoor-rated variant of the Infini Solar three-phase hybrid range. The IP65 housing means it can go straight onto an exterior wall, into a dusty industrial building, or an agricultural plant room with no climate control, without a separate weatherproof enclosure.\u003c\/p\u003e\u003cp\u003eIts -25°C to +60°C range covers the UK climate and extends into cold storage and industrial settings. The 150% unbalanced load support helps where three-phase loads aren't evenly split, common in commercial and agricultural buildings. One of the two output ports can be configured as a generator input, so the unit can switch automatically between solar, battery, grid and generator sources.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis is a three-phase system and must be designed and fitted by a qualified electrician or solar installer. A G99 application and DNO approval are needed for grid connection. Even with IP65 protection, avoid direct sunlight without shading, as high ambient temperature reduces output. Battery and generator wiring must be carried out by a qualified electrician.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIndustrial and agricultural sites needing an outdoor-rated hybrid inverter\u003c\/li\u003e\n\u003cli\u003eCommercial buildings with dusty or uncontrolled indoor environments\u003c\/li\u003e\n\u003cli\u003eThree-phase systems with unbalanced load requirements\u003c\/li\u003e\n\u003cli\u003eInstallations combining solar, battery, grid and generator backup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961441568,"sku":"002137","price":3622.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002137-1.webp?v=1785425224"},{"product_id":"hybrid-solar-inverter-15kw-48v","title":"15kW 3 Phase Hybrid Solar Inverter 48V IP65 G99 | Voltacon InfiniSolar","description":"\u003cp\u003eThe Voltacon InfiniSolar 15kW is a three phase hybrid solar inverter built for commercial buildings, farms and large residential properties that need 400V three phase output alongside 48V battery storage. It is G99 approved and IP65 rated, and it runs in grid-tie, off-grid or hybrid mode from a single unit, with a touchscreen HMI for commissioning and day to day control.\u003c\/p\u003e\u003ch2\u003e3 phase hybrid solar inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 15kW three phase output at 400V (P-P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid compliance\u003c\/strong\u003e, G99 approved and ENA registered for UK connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 rated for indoor plant rooms or outdoor siting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT\u003c\/strong\u003e, dual trackers, up to 26A per tracker, 22.5kW maximum PV input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input\u003c\/strong\u003e, maximum PV input voltage of 1000VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery charging\u003c\/strong\u003e, adjustable charging current up to 300A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and operation\u003c\/h2\u003e\u003cp\u003eIn grid-tie mode the inverter delivers up to 15kW at 230VAC per phase, with a power factor above 0.99 and maximum DC to AC conversion efficiency above 96%. The dual MPPT design accepts two string inputs per tracker, which covers a range of PV array layouts.\u003c\/p\u003e\u003cp\u003eOff-grid and hybrid operation draws from a 48VDC battery bank (40 to 62VDC) and produces pure sine wave output at 230VAC per phase. The 300A adjustable charging current suits systems with large battery banks, whether charging from PV or from the grid. A dual AC output lets one output carry priority loads while the second handles non-critical loads, which helps manage battery draw. The unit also supports 150% unbalanced load across the three phases, dual AC outputs, parallel operation for up to 6 units, built-in Wi-Fi monitoring, and RS485 BMS with CAN interface for lithium battery communication.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial and industrial buildings on a three phase supply, farms and rural properties, large residential properties needing full-house backup, self-consumption systems with export management, and multi-unit parallel installations for higher capacity.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrical engineer or MCS-accredited solar installer. G99 applications require DNO notification and approval before connection. Wiring, battery connections, DC isolation and earthing must comply with IET Wiring Regulations and BS 7671.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060749201696,"sku":"002694","price":2299.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002694-1.webp?v=1785502426"},{"product_id":"10kw-hybrid-solar-inverter-dual-ac","title":"10kW Hybrid Solar Inverter 3-Phase Dual AC IP65 | Conversol","description":"\u003cp\u003eThe Conversol 10kW hybrid solar inverter is a three-phase unit designed for installations that need outdoor mounting and flexible load management. It combines four independent MPPT inputs, dual AC input and output, and an IP65 rated enclosure, and it ships with an energy meter for self-consumption tracking.\u003c\/p\u003e\u003ch2\u003eKey features of this 10kW hybrid solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e: 10kW three-phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT inputs\u003c\/strong\u003e: 4 independent trackers, 26A maximum PV input current per MPPT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e: dual, supports grid and generator simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC output\u003c\/strong\u003e: dual, for separating critical and non-critical loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e: IP65 rated for outdoor installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e: built-in Wi-Fi and an HMI LCD touchscreen with five preset energy scenarios.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe dual AC input and output make this inverter suited to three-phase residential and commercial solar systems, off-grid and hybrid sites that need the unit mounted outdoors, and installations with generator backup. It supports 150% unbalanced load across the three phases and can be run in parallel with up to six units for larger systems.\u003c\/p\u003e\u003ch3\u003eLoad management\u003c\/h3\u003e\u003cp\u003eOutput 1 stays live at all times. Output 2 can be switched independently based on time, battery state or grid availability, which suits high-consumption circuits such as water heaters or EV chargers without touching the critical supply. An RS485 port handles BMS communication, the charging current is user-adjustable, and the included energy meter supports self-consumption mode.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThree-phase grid connection requires G99 compliance in the UK, and fitting should be carried out by a qualified MCS-accredited installer. Confirm battery compatibility and BMS protocol before commissioning. The IP65 enclosure allows outdoor or exposed placement without a separate weatherproof box.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060768272672,"sku":"96-164273-00G","price":1995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-96-164273-00g-1.webp?v=1785505888"},{"product_id":"solis-10kw-3-phase-hybrid-inverter","title":"10kW Three Phase Hybrid Solar Inverter High Voltage | Solis S6-EH3P10K2-H","description":"\u003cp\u003eThe Solis S6-EH3P10K2-H is a 10kW three phase high voltage hybrid solar inverter for solar PV and battery storage systems. It connects solar panels, the grid and a compatible high voltage lithium battery, so solar energy can be used during the day, stored and drawn on later.\u003c\/p\u003e\u003ch2\u003eSolis 10kW 3 phase hybrid inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input\u003c\/strong\u003e, 1000V maximum input voltage, 600V rated PV voltage, MPPT range of 200V to 850V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual MPPT\u003c\/strong\u003e, two independent trackers with two PV string inputs, useful where an array faces different directions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, works with high voltage lithium batteries from 120V to 600V, with up to 10kW charge and discharge power at up to 50A, using CAN and RS485 communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup switching\u003c\/strong\u003e, moves from grid to off-grid supply in under 10ms and handles 160% overload for 60 seconds in off-grid mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units can run together, with each phase carrying up to 50% of rated power under unbalanced loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to three phase residential, agricultural and light commercial sites running solar self-consumption, backup power or off-grid operation. It supports grid side generator access on sites with a limited or unreliable supply, and can integrate with existing grid-tie PV systems for export control and off-grid use.\u003c\/p\u003e\u003ch2\u003eMonitoring\u003c\/h2\u003e\u003cp\u003eSolisCloud provides remote monitoring, system control and AI-assisted optimisation, so installers and owners can check energy flows and performance without a site visit.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is a high voltage battery inverter and is not suitable for standard 48V battery banks. Three phase grid connection must meet G99 (UK) or equivalent local regulations. Installation, commissioning and grid connection should be carried out by a qualified MCS-accredited installer, with correct DC fusing, AC protection, surge protection and earthing in place.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52061012689184,"sku":"S6-EH3P10K2-H","price":1564.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-eh3p10k2-h-1.webp?v=1785508894"},{"product_id":"solis-50kw-high-voltage-hybrid-inverter","title":"Solis S6-EH3P50K-H 50kW Three Phase Hybrid Inverter High Voltage","description":"\u003cp\u003eThe \u003cstrong\u003eSolis S6-EH3P50K-H\u003c\/strong\u003e is a 50kW three-phase hybrid inverter built for commercial and industrial solar PV and battery storage. It runs on 400VAC at 50Hz and works with a high voltage battery range of 150V to 800V DC, combining large-scale generation, storage and backup power in one unit.\u003c\/p\u003e\u003ch2\u003eSolis three phase hybrid inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 50kW rated, 400VAC three phase, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT trackers\u003c\/strong\u003e, 4 trackers with up to 8 string inputs, 20A max per string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV array support\u003c\/strong\u003e, recommended array size up to 100kW, max usable PV input power 96kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery ports\u003c\/strong\u003e, 2 independent ports, each handling up to 70A charge\/discharge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoupling\u003c\/strong\u003e, DC and AC coupling supported for new builds and retrofits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup switching\u003c\/strong\u003e, less than 10ms, with 160% off-grid overload for 2 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis is not a residential unit. It suits warehouses, agricultural sites and industrial buildings where a single three-phase inverter needs to manage significant solar input alongside large battery banks and backup loads. The high voltage battery architecture, 150V to 800V DC, keeps operating current lower than a 48V system for the same power, which reduces cable sizing and heat losses across the installation. It is not compatible with standard 48V battery systems.\u003c\/p\u003e\u003ch3\u003eFlexibility and expansion\u003c\/h3\u003e\u003cp\u003eDual independent battery ports let two separate battery strings be sized and expanded separately, giving room for phased installs or redundancy. Multiple units can be paralleled for larger sites, and a generator input is supported for extended backup. The 160% overload rating for 2 seconds covers the starting surge of motor-driven loads such as pumps and compressors without tripping the inverter.\u003c\/p\u003e\u003ch2\u003eMonitoring and build\u003c\/h2\u003e\u003cp\u003eA 7-inch industrial touchscreen with Bluetooth and app control sits alongside SolisCloud remote monitoring and diagnostics. The enclosure carries an IP66 rating with intelligent fan cooling.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52061014294816,"sku":"S6-EH3P-50KW","price":4305.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-eh3p-50kw-1.webp?v=1785509145"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/three-phase-hybrid-inverters.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}