{"title":"T5 LED Tubes","description":"\u003cp\u003eT5 LED tubes are a direct replacement for T5 fluorescent tubes, using the same pins and fitting into the same fixtures. The end caps rotate 180 degrees so you can line up the light output correctly whichever way the tube sits in the fitting.\u003c\/p\u003e\u003cp\u003eEach tube has its own built-in power supply, so there's no separate driver to install. They drop straight into fittings with a magnetic ballast, which also gets rid of the fluorescent hum. Where a fixture has an electronic ballast, this needs to be bypassed and the tube wired directly to the mains. Both single-end and double-end versions are available.\u003c\/p\u003e\u003cp\u003eLengths run from 30cm up to 150cm, with wattages from 6W to 25W depending on tube length, and a choice of colour temperatures including Warm White, Natural White, Cool White and Frosted. Unlike fluorescent tubes, there's no flickering, no dimming towards end of life, and no mercury to worry about when a tube eventually needs disposing of.\u003c\/p\u003e","products":[{"product_id":"led-t5-tube-60cm-10w","title":"T5 LED Tube Light 60cm 10W 1200lm Mains Powered | Ledison","description":"\u003cp\u003eThis T5 LED tube light measures 60cm (563mm) and runs on 10W of power, wired directly to the mains with no external driver needed. A built-in power supply sits inside the tube itself, so it works straight from an AC voltage source between 90V and 305V AC. The aluminium housing and rotating end caps make it a straightforward retrofit for existing T5 fluorescent fittings.\u003c\/p\u003e\u003ch2\u003eT5 LED tube light features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight output\u003c\/strong\u003e, 1200lm at 10W, giving 120lm\/W typical efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour rendering\u003c\/strong\u003e, CRI \u0026gt;76\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam angle\u003c\/strong\u003e, 120°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100-305VAC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan\u003c\/strong\u003e, up to 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED chips\u003c\/strong\u003e, SMD 2835 for even light distribution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe end fittings rotate 180 degrees and lock into position, which helps when aligning the tube during fitting. This is a hybrid T6\/T5 design: it matches standard T5 length and fitting compatibility but uses a wider 22mm body to house the internal driver safely. If your existing fitting is double-ended, a quick rewiring is needed since these tubes take a single-ended power connection.\u003c\/p\u003e\u003ch2\u003eBuild and safety\u003c\/h2\u003e\u003cp\u003eThermal vias in the board carry heat away from the LEDs to support reliable operation. The tube emits no UV light. It is certified to TÜV Rheinland, CE, RoHS and UL standards, covering electric shock protection and electromagnetic compatibility requirements for the UK, EU and USA.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to retrofitting existing T5 fluorescent fittings in offices, retail units, workshops and domestic spaces where a direct mains-powered LED upgrade is wanted without replacing the fitting itself.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White","offer_id":52053862908192,"sku":"110973","price":14.77,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52053862940960,"sku":"110702","price":14.77,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52053862973728,"sku":"110907","price":14.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-110973-1.webp?v=1785421495"},{"product_id":"t5-led-tube-light-12w-90cm","title":"T5 LED Tube Light 90cm 12W 1440lm | Ledison","description":"\u003cp\u003eThis Ledison T5 LED tube measures 90cm (863mm pin to pin) and runs on 12W, connecting straight to the mains with no separate ballast needed. It carries a built-in driver, an aluminium body and rotating end caps that lock into place for easier fitting.\u003c\/p\u003e\u003ch2\u003eT5 led tube light features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight output\u003c\/strong\u003e, 1440lm at 120lm\/W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour rendering\u003c\/strong\u003e, CRI \u0026gt;76\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100-305VAC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam angle\u003c\/strong\u003e, 120 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan\u003c\/strong\u003e, up to 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody\u003c\/strong\u003e, 22mm diameter, LED chips mounted for even light spread\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting and compatibility\u003c\/h2\u003e\u003cp\u003eThis is a hybrid T6\/T5 tube. It fits the length and connection layout of most standard T5 fittings, but the body is a wider 22mm T6 profile so the internal driver sits safely inside the tube. If your existing fitting is double-ended, a quick rewire to single-ended power is needed before installing.\u003c\/p\u003e\u003ch2\u003eBuild and safety\u003c\/h2\u003e\u003cp\u003eThe aluminium housing helps carry heat away from the LEDs. The tube is rated ROHS compliant, CE and UL, and carries a 5 year warranty. It is not dimmable.\u003c\/p\u003e\u003ch2\u003eColour temperature options\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarm white: 2700-3200K\u003c\/li\u003e\n\u003cli\u003eNatural white: 4000-5000K\u003c\/li\u003e\n\u003cli\u003eCool white: 5500-6500K\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOperating temperature range is -20°C to 50°C, suitable for retrofitting existing T5 fluorescent fittings in offices, retail units and workshops.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White","offer_id":52095573328160,"sku":"110975","price":17.09,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52095573360928,"sku":"110920","price":17.09,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52095573393696,"sku":"110976","price":17.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-110975-1.webp?v=1785753886"},{"product_id":"led-tube-t5-120cm-20w","title":"T5 LED Tube Light 120cm 20W 2400lm T6\/T5 Hybrid | Ledison","description":"\u003cp\u003eThis T5 LED tube light measures 120cm (1163mm pin to pin) and runs on 20W, connecting directly to the mains with no external ballast needed. It uses a built-in driver housed inside an aluminium body, giving 2400lm of output and rotating end caps that lock in place for easier fitting.\u003c\/p\u003e\u003ch2\u003eKey features of this T5 LED tube light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 2400lm at 20W, with a typical efficiency of 120lm\/W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 100-305VAC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour rendering index\u003c\/strong\u003e, greater than 76\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam angle\u003c\/strong\u003e, 120 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan\u003c\/strong\u003e, up to 50,000 hours, with a 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, ROHS Compliant, CE, UL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA hybrid T6\/T5 design\u003c\/h2\u003e\u003cp\u003eAlthough sized to match standard T5 fittings, this tube uses a 22mm T6 body to fit the internal driver safely inside. It is single-ended, so a double-ended fitting will need rewiring before installation. The SMD 2835 chips give even light distribution, and thermal vias in the board carry heat away from the LEDs to support reliable running.\u003c\/p\u003e\u003ch2\u003eWhere it fits\u003c\/h2\u003e\u003cp\u003eIt's a retrofit replacement for existing fluorescent T5 tubes in offices, retail units, workshops and any space using standard 120cm T5 fittings. It runs cool, emits no UV light, and the end caps rotate 180 degrees for flexible positioning during installation.\u003c\/p\u003e\u003ch2\u003eColour temperature options\u003c\/h2\u003e\u003cp\u003eAvailable in warm white (2700-3200K), natural white (4000-5000K) and cool white (5500-6500K), so you can match it to the existing lighting scheme. This tube is not dimmable.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White","offer_id":52095603015968,"sku":"110953","price":19.3,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52095603048736,"sku":"110998","price":19.3,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52095603081504,"sku":"110983","price":19.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-110953-1.webp?v=1785755083"},{"product_id":"led-t5-tube-light-30cm","title":"T5 LED Tube Light 30cm 302mm 6W 720lm Direct Mains | Ledison","description":"\u003cp\u003eThis T5 LED tube light measures 30cm (302mm) and runs on just 6W, producing 720lm of output. It is a direct mains powered tube with a built-in isolated driver, so no external control gear is needed. The aluminium housing and rotating end caps make it a straightforward retrofit for existing fluorescent T5 fittings.\u003c\/p\u003e\u003ch2\u003eKey features of this T5 LED tube light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting\u003c\/strong\u003e, T5, 302mm length pin to pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, 6W rated wattage, 720lm output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, direct mains operation, built-in driver removes the need for a separate power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, aluminium body with a 22mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd caps\u003c\/strong\u003e, rotate 180 degrees and lock into position for flexible aiming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan\u003c\/strong\u003e, rated for 50,000 hours, with no UV emission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDirect mains, built-in driver\u003c\/h2\u003e\u003cp\u003eThe driver sits sealed inside the tube itself, so the fitting takes power straight from the mains supply within the stated AC voltage range. That keeps wiring simpler than a conventional T5 fluorescent setup and removes an external ballast from the installation.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to retrofitting standard T5 fittings in commercial, retail and domestic settings. The tube uses a slightly wider T6 body of 22mm to accommodate the internal driver, while still matching the length and mounting of common T5 fittings. Some double-ended fittings may need quick rewiring, since this tube is single-ended.\u003c\/p\u003e\u003ch3\u003eBuild and construction\u003c\/h3\u003e\u003cp\u003eSMD 2835 LED chips are used across the board for even light distribution. Thermal vias on the board help carry heat away from the LEDs to support consistent performance.\u003c\/p\u003e\u003ch2\u003eCertification\u003c\/h2\u003e\u003cp\u003eManufactured to TÜV Rheinland, CE, RoHS and UL standards, covering safety requirements including protection against electric shock.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White","offer_id":52095607144736,"sku":"110971","price":12.9,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52095607177504,"sku":"110977","price":12.9,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52095607210272,"sku":"110706","price":12.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-110971-1.webp?v=1785755456"},{"product_id":"t5-led-tube-25w-3000lm","title":"T5 LED Tube Light 150cm 25W 3000lm CRI\u003e76 | Ledison","description":"\u003cp\u003eThis 150cm T5 LED tube replaces a fluorescent T5 fitting with a mains powered LED tube that draws 25W and outputs 3000lm. The driver is built into the tube itself, so there is no separate control gear to fit.\u003c\/p\u003e\u003ch2\u003eKey features of this T5 LED tube light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 150cm (1463mm pin to pin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, 25W rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight output\u003c\/strong\u003e, 3000lm at 120lm\/W typical efficacy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam angle\u003c\/strong\u003e, 120 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan\u003c\/strong\u003e, 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, aluminium body with rotating end caps that lock in position\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and installation\u003c\/h2\u003e\u003cp\u003eThe tube is built on a wider 22mm T6 body rather than the slimmer standard T5 diameter, which is what allows the isolated driver to sit safely inside the tube. It still fits the length and mounting of a standard T5 fitting. Because the driver needs a single-ended power connection, a double-ended fitting will need rewiring before this tube is installed.\u003c\/p\u003e\u003cp\u003eLEDs are SMD 2835 chips arranged for even light distribution across the length of the tube, and thermal vias in the board help move heat away from the LEDs.\u003c\/p\u003e\u003ch2\u003eCertifications\u003c\/h2\u003e\u003cp\u003eThe tube is tested to a 4000V high voltage insulation standard and carries TÜV Rheinland, CE, RoHS and UL certification.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to retrofitting existing T5 fluorescent fittings in offices, retail units, workshops and domestic spaces where a direct swap to LED is wanted without replacing the fitting itself.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White","offer_id":52095616942368,"sku":"110711","price":22.61,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52095616975136,"sku":"110959","price":22.61,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52095617007904,"sku":"110960","price":22.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-110711-1.webp?v=1785756560"},{"product_id":"t5-led-tube-light-22w","title":"T5 LED Tube Light 150cm 22W 2640lm | Ledison","description":"\u003cp\u003eThis T5 LED tube light measures 150cm (1463mm pin to pin) and runs on 22W, wired directly to the mains with no external ballast needed. It is a retrofit replacement for fluorescent T5 tubes, built with a driver housed inside the tube itself.\u003c\/p\u003e\u003ch2\u003eKey features of this T5 LED tube light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight output\u003c\/strong\u003e, 2640lm at 120lm\/W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour rendering index\u003c\/strong\u003e, \u0026gt;76 CRI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100-305VAC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam angle\u003c\/strong\u003e, 120 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan\u003c\/strong\u003e, up to 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, aluminium body, 22mm diameter, with rotating end caps that lock into position for easier fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe tube uses SMD 2835 LED chips for even light distribution, and thermal vias on the board help carry heat away from the LEDs. It runs cooler than fluorescent tubes and emits no UV light.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eThis is a T6\/T5 hybrid tube. It matches standard T5 length and fitting compatibility, but the body is a wider 22mm T6 profile to fit the internal driver. It is single-ended, so if your existing fitting is double-ended, a quick rewire will be needed. It is not dimmable.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to replacing existing fluorescent T5 tubes in commercial and domestic fittings where a direct mains connection is wanted, without the need for a separate driver unit.\u003c\/p\u003e\u003ch2\u003eCertification and warranty\u003c\/h2\u003e\u003cp\u003eCertified to TÜV Rheinland, CE, RoHS and UL standards, and covered by a 5 year warranty. Available in warm white (2700-3200K), natural white (4000-5000K) and cool white (5500-6500K).\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White","offer_id":52095617990944,"sku":"110911","price":21.5,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52095618023712,"sku":"110942","price":21.5,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52095618056480,"sku":"110961","price":21.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-110911-1.webp?v=1785756675"},{"product_id":"led-emergency-conversion-kit-lifepo4","title":"Liteplan NLP\/1S\/80-K LED Emergency Conversion Pack LiFePO4","description":"\u003cp\u003eThe Liteplan NLP\/1S\/80-K is an LED emergency conversion pack for integral use inside LED luminaires, giving compatible fittings a 3-hour switchable emergency lighting function alongside normal operation. It suits LED loads from 6V to 55V and is built around long life LiFePO4 battery technology.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency duration\u003c\/strong\u003e, 3-hour switchable emergency lighting module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded parts\u003c\/strong\u003e, module, single cell battery and charge LED indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED load range\u003c\/strong\u003e, suitable for 6V to 55V LED loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery type\u003c\/strong\u003e, long life LiFePO4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e, slim module for mounting inside the luminaire, suited to linear applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, fitted cables with a strain relief module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eOnce installed, the fitting operates as normal from its standard switch. When an unswitched power supply is connected, the pack takes over and provides emergency operation during a mains failure. This gives one system dual functionality: everyday lighting and maintained emergency backup in a single conversion.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eLiteplan has tested and verified this conversion pack for use with Ledison T8 tube lights, T5 tube lights, GU10 spots and GLS LED bulbs, provided the correct installation method is followed. Its slim profile makes it a practical fit for linear tube applications where space inside the fitting is limited.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis conversion pack is intended for compatible LED luminaires, particularly linear fittings, in offices, corridors, commercial buildings and educational spaces where emergency lighting is needed. It is aimed at installers, maintenance teams and lighting manufacturers looking to add emergency backup to approved LED products.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNLP\/1S\/80-K emergency module\u003c\/li\u003e\n\u003cli\u003eSingle cell LiFePO4 battery\u003c\/li\u003e\n\u003cli\u003eCharge LED indicator\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Liteplan","offers":[{"title":"Default Title","offer_id":52096611156256,"sku":"NLP\/1S\/80-K","price":41.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-nlp-1s-80-k-1.webp?v=1785761858"},{"product_id":"t5-led-tube-15w-4ft","title":"T5 LED Tube Light 4ft\/120cm 15W CFL Replacement | Ledison","description":"\u003cp\u003eThe Ledison T5 LED tube light is a 15W retrofit for 4ft\/120cm T5 fluorescent fittings. It delivers 2400lm using SMD 2835 LED chips and runs from a universal 100-305VAC supply with a built-in isolated power supply, so no external driver is needed.\u003c\/p\u003e\u003ch2\u003eKey features of this t5 led tube light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight output\u003c\/strong\u003e: 2400lm at 120lm\/W efficacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour rendering\u003c\/strong\u003e: CRI greater than 76 for accurate colour rendering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan\u003c\/strong\u003e: rated for 50,000 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd caps\u003c\/strong\u003e: 180 degree rotating, lockable end caps for easy alignment. Double-ended fittings may need a quick rewire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: ROHS Compliant, CE, UL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 5 years.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes, offices and commercial spaces where an existing fluorescent T5 fitting is being converted to LED. The rotating end caps allow the tube to be aligned correctly once fitted, and the built-in power supply means the tube can go straight into a compatible fitting without adding a separate driver.\u003c\/p\u003e\u003ch3\u003eColour temperature options\u003c\/h3\u003e\u003cp\u003eThe tube is available in warm white (2700-3200K), natural white (4000-5000K) and cool white (5500-6500K), letting you match the tube to the room it's replacing.\u003c\/p\u003e\u003ch3\u003eBuild and operating range\u003c\/h3\u003e\u003cp\u003eThe tube has a 22mm diameter and measures 1163mm pin to pin. It is not dimmable, and is rated to operate between -20 degrees C and 50 degrees C, with a 50\/60Hz supply frequency.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White","offer_id":52096702742816,"sku":"110979","price":10.49,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52096702775584,"sku":"110969","price":10.49,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52096702808352,"sku":"110981","price":10.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-110979-1.webp?v=1785767920"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/t5-led-tube-lights.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}