{"title":"Solar Inverters","description":"\u003cp\u003eThis range covers off-grid, hybrid and grid-tie solar inverters for homes, farms and commercial installations. Off-grid inverters with MPPT charging suit sites with no mains connection, converting battery power to pure sine wave 230V output. Hybrid units let you run appliances directly from solar while managing battery storage and grid supply together.\u003c\/p\u003e\u003cp\u003eStock spans single-phase and three-phase systems across a wide range of power ratings, from small 12V and 24V units up to larger kW-class inverters for bigger arrays. Brands such as Conversol feature heavily, with models offering MPPT charge controllers, fast charging and Bluetooth monitoring.\u003c\/p\u003e\u003cp\u003eInstallers and self-builders use this category to match inverter capacity and battery voltage to a specific system, whether that's a small off-grid cabin setup or a larger hybrid installation feeding self-consumption.\u003c\/p\u003e","products":[{"product_id":"sma-tripower-x-20kw-inverter","title":"3-Phase Grid-Tie Solar Inverter 20kW IP65 | SMA Sunny Tripower X","description":"\u003cp\u003eThe SMA Sunny Tripower X 20kW is a three phase grid tie inverter built for commercial PV systems and large residential installations. It runs three independent MPP trackers, accepts up to 1000VDC on the input side, and sits in an IP65 enclosure suitable for outdoor mounting. An integrated system manager adds monitoring and control across multiple inverters without extra hardware.\u003c\/p\u003e\u003ch2\u003eGrid tie inverter key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 20kW AC at 230V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPP trackers\u003c\/strong\u003e, three independent trackers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, up to 1000VDC maximum, 345 to 800V MPP range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent per tracker\u003c\/strong\u003e, 24A maximum usable input current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 98.2% maximum, 97.9% European efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 rated for outdoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt-in system functions\u003c\/h2\u003e\u003cp\u003eSMA ShadeFix improves yield during partial shading by optimising at the inverter level, without module-level optimisers. SMA ArcFix provides active DC arc-fault detection. The integrated system manager can monitor and control up to five SMA inverters plus one energy meter, handling dynamic power control and feed-in management for systems up to 135kVA. Communication runs over Ethernet, local WLAN, or RS485, using SMA Modbus and SunSpec Modbus protocols, with direct access to Sunny Portal via ennexOS for remote monitoring.\u003c\/p\u003e\u003ch2\u003eProduct family\u003c\/h2\u003e\u003cp\u003eThis 20kW model shares its platform and footprint with the 12kW, 15kW, and 25kW variants in the Sunny Tripower X range. The three MPP trackers give independent string management, which helps on roofs with mixed orientations or shading.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial rooftop and ground-mounted PV, large residential solar arrays, multi-inverter sites needing centralised monitoring, and installations with partial shading or several roof aspects.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrical engineer or MCS-accredited solar installer. Connection at this power level requires G99 notification and DNO approval in the UK. DC wiring, string fusing, AC protection and earthing must follow IET Wiring Regulations and SMA's installation manual, with commissioning completed via SMA's commissioning tools before the system is switched on.\u003c\/p\u003e","brand":"SMA","offers":[{"title":"Default Title","offer_id":52049599332640,"sku":"STP20-50","price":3142.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-stp20-50-1.webp?v=1785330321"},{"product_id":"force-h3x-6kw-hybrid-inverter","title":"Pylontech Force H3X 6kW Hybrid Solar Inverter MPPT","description":"\u003cp\u003eThe Pylontech Force H3X FH3X6K-HY-1P is a single phase hybrid solar inverter and battery storage system rated at 6kW, built for solar self-consumption, grid import and export, smart tariff switching and backup power. This hybrid solar inverter pairs directly with Pylontech FH10050 high voltage LiFePO4 battery modules stacked vertically beneath the unit.\u003c\/p\u003e\u003ch2\u003ePylontech Force H3X hybrid inverter overview\u003c\/h2\u003e\u003cp\u003eThe inverter, BMS and energy management electronics are combined into one enclosure. Pylontech promotes a fast, simplified installation process of around 15 minutes on a properly prepared site, carried out by a qualified installer. The battery connection is wire-free, using an internal bus bar rather than separate power or communication cables between inverter and battery modules.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal power\u003c\/strong\u003e, 6kW single phase output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, Pylontech FH10050 high voltage LiFePO4 modules, stacked vertically\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid interaction\u003c\/strong\u003e, CT clamp based monitoring of import and export, without a separate Eastron meter for standard operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup power port\u003c\/strong\u003e, supplies selected essential loads during a mains outage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart tariff support\u003c\/strong\u003e, Intelligent Dynamic mode adjusts charging and discharging around tariff periods, including time-of-use pricing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e, integrated inverter, BMS and energy management with fewer external components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to home solar battery storage, solar self-consumption, smart import and export tariffs, backup power for essential circuits, and small offices, warehouses or commercial buildings using high voltage battery storage. The Force H3X platform can expand across residential and small commercial systems, subject to system design and manufacturer limits.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThis is professional installation equipment. Grid connection, backup wiring, CT connection, DNO notification and electrical protection must all be completed by a qualified, competent installer in line with local regulations and the manufacturer's installation manual.\u003c\/p\u003e","brand":"Pylontech","offers":[{"title":"Default Title","offer_id":52053853864224,"sku":"003029","price":1363.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-003029-1.webp?v=1785421043"},{"product_id":"growatt-5kw-48v-off-grid-inverter","title":"Growatt SPF5000-ES 5kW 48V Off-Grid Inverter Charger | 100A MPPT","description":"\u003cp\u003eThe Growatt SPF5000-ES is a 5kW off-grid solar inverter and battery charger built around a 48V DC system and a 100A MPPT solar charger. PV input can run up to 450V DC, and the inverter can operate without a battery bank connected, drawing directly from solar. Wi-Fi monitoring is included as standard.\u003c\/p\u003e\u003ch2\u003eKey features of this Growatt 5kW off-grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 5kW off-grid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charger\u003c\/strong\u003e, 100A integrated MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input range\u003c\/strong\u003e, MPPT window from 120V to 450V DC, maximum PV input voltage 450V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery independent\u003c\/strong\u003e, runs from solar without a battery bank connected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined supply\u003c\/strong\u003e, draws from solar, battery and grid at once rather than dropping to bypass when reserves are low\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units for 30kW total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScheduled charging\u003c\/strong\u003e, built-in timer for overnight off-peak charging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Wi-Fi module included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe SPF5000-ES runs at higher PV string voltages than many 48V off-grid inverters, with an MPPT window from 120V up to 450V DC. Growatt recommends a minimum of six 300-500W panels wired in series to keep the string within the correct operating range, with a healthy system typically sitting between 300V and 350V.\u003c\/p\u003e\u003cp\u003eRather than switching to bypass mode when the battery is low, the inverter combines whatever solar, battery and grid power is available to keep supplying loads. This reduces reliance on the grid and makes better use of the solar generated during the day. The overnight timer can charge the battery bank from the grid at off-peak rates, so the batteries start each day full ahead of solar generation.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid homes needing higher PV string voltage operation\u003c\/li\u003e\n\u003cli\u003eSystems requiring simultaneous solar, battery and grid supply to loads\u003c\/li\u003e\n\u003cli\u003eOff-grid installations that may expand via parallel units\u003c\/li\u003e\n\u003cli\u003eSystems using overnight scheduled charging on an economy tariff\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or solar installer. PV string voltage must not exceed 450V DC at any time, including cold-weather open-circuit voltage, so this should be calculated for the coldest expected temperature before commissioning. Battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Growatt","offers":[{"title":"Default Title","offer_id":52053853929760,"sku":"002359","price":523.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002359-1.webp?v=1785421062"},{"product_id":"solis-3-6kw-hybrid-inverter","title":"3.6kW Single-Phase Hybrid Solar Inverter | Solis S5-EH1P3.6K-L","description":"\u003cp\u003eThe Solis S5-EH1P3.6K-L is a 3.6kW single-phase hybrid solar inverter built for residential and small commercial energy storage systems. It combines a dual MPPT design with fanless natural cooling, integrated AFCI arc-fault protection, and an off-grid backup function, and it works with both lithium-ion and lead-acid batteries. Grid-tie, off-grid, and self-consumption modes are all supported from the same unit.\u003c\/p\u003e\u003ch2\u003eSolis 3.6kW hybrid inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 3.6kW single-phase hybrid output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual MPPT\u003c\/strong\u003e, two MPP trackers with an algorithm tuned for solar yield\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-grid backup\u003c\/strong\u003e, continues supplying loads during a grid outage, using a changeover switch on the off-grid circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExport control\u003c\/strong\u003e, integrated, for DNO compliance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPS function\u003c\/strong\u003e, fast switchover to battery power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, fanless natural convection, no moving parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, lithium-ion (BMS) and lead-acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications\u003c\/strong\u003e, CAN and RS485, optional\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eIn grid-tie mode the S5-EH1P3.6K-L feeds surplus solar energy to household loads first, then exports any remainder to the grid. If the grid fails, it switches to off-grid mode and draws on the battery and solar array to keep critical loads running. The intelligent EMS manages the flow between array, battery, grid and loads continuously, aiming to maximise self-consumption and reduce grid import.\u003c\/p\u003e\u003ch2\u003eOperating modes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGrid-tie with direct power feed to the grid and home appliances\u003c\/li\u003e\n\u003cli\u003eOff-grid operation for complete independence from the grid\u003c\/li\u003e\n\u003cli\u003eGrid-tie with battery storage for self-consumption\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential single-phase hybrid solar and battery storage installations, self-consumption systems needing grid export with backup, and any site requiring export control for DNO compliance.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited solar installer. A changeover switch is required if the off-grid backup output will be used. Grid connection needs a G98 notification or G99 application to the DNO, and battery systems must meet BS EN 62619 along with local building regulations.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053853962528,"sku":"S5-EH1P3.6K-L","price":672.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s5-eh1p3-6k-l-1.webp?v=1785421082"},{"product_id":"victron-24-1200-inverter-230v","title":"Victron Inverter 24\/1200 230V VE.Direct Pure Sine Wave UK | PIN242121400","description":"\u003cp\u003eThe Victron Inverter 24\/1200 230V VE.Direct is a pure sine wave inverter built for 24V DC battery systems. It delivers 1200W of continuous AC output at 230V, without a built-in charger, making it suited to off-grid, marine and vehicle installations that need dependable DC-to-AC conversion.\u003c\/p\u003e\u003ch2\u003eVictron inverter key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 1200W from a 24V DC battery bank, 230V AC output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave, compatible with sensitive electronics, motors and compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, VE.Direct port for monitoring and configuration via Victron GX devices, Color Control GX, or VictronConnect on a PC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow power mode\u003c\/strong\u003e, search mode reduces idle consumption when loads are light or absent, restarting automatically once a load is reconnected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, low battery voltage shutdown, high battery voltage shutdown, overload protection and over-temperature shutdown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug configuration\u003c\/strong\u003e, UK plug and socket, ready for domestic and light commercial use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 6.9 kg, practical for fixed and mobile installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe 24\/1200 belongs to Victron's VE.Direct inverter range, using a serial interface to report battery voltage, output load and alarm states to a compatible GX device or a laptop or phone via a VE.Direct to USB cable. The 24V input suits larger battery banks already running at 24V nominal, such as two 12V batteries in series or a 24V lithium battery. The pure sine wave output avoids the issues a modified sine wave inverter can cause with inductive loads.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid cabins and remote buildings running a 24V battery system.\u003c\/li\u003e\n\u003cli\u003eCampervans, motorhomes and self-build van conversions with 24V leisure battery banks.\u003c\/li\u003e\n\u003cli\u003eMarine vessels requiring 230V AC output from a 24V DC system.\u003c\/li\u003e\n\u003cli\u003eBackup power for critical AC loads during mains outages where a 24V bank is already installed.\u003c\/li\u003e\n\u003cli\u003eIntegration into Victron-based off-grid systems monitored via a GX device or VictronConnect.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter 24\/1200 230V VE.Direct, UK configuration.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis inverter should be installed by a qualified electrician or experienced system integrator. DC cable sizing and fusing must suit the current draw at 24V, which is significant at full load, and the battery bank must be rated for the required peak current. Installations forming part of a building electrical system must comply with BS 7671. This unit is not grid-tied and does not require G98 or G99 notification. Ventilation clearances around the unit must be maintained to prevent thermal shutdown under sustained load.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053853995296,"sku":"PIN242121400","price":220.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin242121400-1.webp?v=1785421088"},{"product_id":"victron-12-1200-pure-sine-inverter","title":"Victron Inverter 12\/1200 230V VE.Direct IEC | PIN122121110","description":"\u003cp\u003eThe Victron Inverter 12\/1200 is a pure sine wave inverter converting 12V DC battery power into 230V AC at 1200VA continuous output. It suits off-grid systems, vehicles, boats and backup power setups where a compact inverter with monitoring capability is needed.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 1200VA continuous at 230V AC from a 12V DC input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave, suitable for sensitive electronics and motor loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, VE.Direct port for connection to Victron GX devices and the VictronConnect app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector\u003c\/strong\u003e, IEC AC output socket for standard European and UK-compatible loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, low battery voltage shutdown, over-temperature and overload protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 7.64 kg, compact enough for confined installation spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003ePart of Victron's VE.Direct inverter range, the 12\/1200 links directly into Victron's monitoring ecosystem. The VE.Direct port shares real-time data on output power, battery state and fault conditions with a GX device or the VictronConnect app via a VE.Direct to USB or Bluetooth dongle, without extra metering hardware.\u003c\/p\u003e\u003cp\u003eAt 1200VA it handles moderate loads such as power tools, lighting circuits, small appliances and pumps. Being pure sine wave, it works with a wider range of equipment than modified sine wave units, including inductive loads and gear with active power factor correction. The IEC output is standard across European installations and works with UK IEC-lead equipment. The 12V input suits 12V battery systems typical of campervans, narrowboats, small off-grid cabins and vehicle installations; it is not suitable for 24V or 48V banks without a separate DC-DC converter.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCampervans and motorhomes running 230V appliances from a 12V leisure battery bank.\u003c\/li\u003e\n\u003cli\u003eNarrowboats and sailing vessels needing compact 230V AC supply from 12V house batteries.\u003c\/li\u003e\n\u003cli\u003eSmall off-grid cabins and shelters with 12V battery storage.\u003c\/li\u003e\n\u003cli\u003eMobile workshops requiring 230V tool power from a 12V auxiliary battery.\u003c\/li\u003e\n\u003cli\u003eBackup power systems using a 12V battery bank for emergency 230V supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit this inverter using a qualified electrician or competent person familiar with DC and AC systems. Connect it to a correctly rated 12V battery bank with suitably sized DC cabling and fusing matched to the inverter's input current. Wire the IEC AC output in line with local regulations. The unit is not grid-tied and does not require G98 or G99 notification. On boats, mount it in a ventilated, dry location away from fuel sources.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter 12\/1200 230V VE.Direct IEC unit.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053854093600,"sku":"PIN122121110","price":206.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin122121110-1.webp?v=1785421137"},{"product_id":"5kw-off-grid-inverter-24v-mppt-charger","title":"5kW Off-Grid Solar Inverter 24V 80A MPPT Charger | Conversol","description":"\u003cp\u003eThe Conversol M-5K-24 combines a 5kW inverter with an 80A MPPT solar charger in a single unit built around a 24V battery bank. It accepts either 120VAC or 230VAC input, so it suits grid, generator or off-grid setups across different regions.\u003c\/p\u003e\u003ch2\u003eOff grid solar inverter charger features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 5kW continuous, 10kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 24V, with 80A MPPT solar charging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT range\u003c\/strong\u003e, 30V to 115VDC, open circuit up to 145VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 2000W PV array\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, 120VAC or 230VAC grid or generator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak efficiency\u003c\/strong\u003e, 98%\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe M-5K-24 suits 24V off-grid systems where a lower battery voltage keeps wiring and equipment costs down. The wide AC input range covers both 230V and 120V connections, and voltage selection can be set for computer loads or general household appliances.\u003c\/p\u003e\u003cp\u003eSolar charging tops out at 80A from the PV array, and AC charging adds a further 60A, giving a combined charge current of 140A. That combination suits larger 24V battery banks that need to recharge quickly.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits 24V off-grid residential systems, cabins and remote properties, agricultural sites, boats, and backup power setups built around a 24V battery bank.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or solar installer. Cable sizing and fusing need to match the 24V high-current operation, and the battery bank must be matched to the inverter's charge settings. Do not exceed the 145VDC PV open circuit voltage limit, and follow all relevant electrical safety regulations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol M-5K-24 off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053854257440,"sku":"90914167","price":787.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914167-1.webp?v=1785421187"},{"product_id":"vmi-inverter-extension-cable-1m","title":"1m VMI Microinverter Extension Cable 230Vac | Voltacon","description":"\u003cp\u003eThis 1m extension cable connects a Voltacon VMI microinverter to a junction box or consumer unit. One end fits the inverter's female AC output with a male connector; the other end is left open with three cores for wiring in.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 1 metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, male AC connector to open 3-core end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCores\u003c\/strong\u003e, live, neutral and earth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type\u003c\/strong\u003e, waterproof, suitable for outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, Voltacon VMI microinverter female AC output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed as the first connection point in a VMI microinverter AC bus chain, linking the inverter's output to a junction box or consumer unit. Suits installations where the run needs to be wired directly rather than through another inline connector.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis cable carries mains AC voltage. It must be installed by a qualified electrician, with the open end correctly terminated and protected. Wiring must comply with IET Wiring Regulations and G98 requirements.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053860679968,"sku":"3PIN-230V-EXT","price":8.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-3pin-230v-ext-1.webp?v=1785421231"},{"product_id":"victron-12-375-inverter-ve-direct","title":"Victron Inverter 12\/375 230V VE.Direct IEC | PIN121371110","description":"\u003cp\u003eThe Victron Inverter 12\/375 is a 12V DC to 230V AC pure sine wave inverter built for small off-grid and mobile power setups. It delivers 375VA continuous output through an IEC socket, and connects via VE.Direct for monitoring and configuration. Installers fitting out campervans, boats, small cabins and backup circuits with a modest AC load will find it a compact fit.\u003c\/p\u003e\u003ch2\u003eKey features of this Victron inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 375VA continuous, 230V AC pure sine wave from a 12V DC input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector\u003c\/strong\u003e, IEC output socket for straightforward appliance connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, VE.Direct port works with Victron's GX devices or the VictronConnect app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 3.2kg, suited to space-constrained installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, built-in low battery voltage, over-temperature and overload protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe 375VA rating suits lighting circuits, small power tools, laptop chargers and similar loads rather than kettles or heaters. It's a common choice for campervan and motorhome 230V supply from a 12V leisure battery, marine installations wanting an IEC output, small off-grid cabins or sheds, and backup power for low-draw equipment like routers or lighting.\u003c\/p\u003e\u003ch3\u003eMonitoring and setup\u003c\/h3\u003e\u003cp\u003eThe VE.Direct port lets an installer read real-time data and fault history through the VictronConnect app over Bluetooth, using a VE.Direct Bluetooth Smart dongle, or a direct USB connection, without needing a full GX system. That keeps commissioning and fault-finding simple on smaller installs.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit this inverter with correctly rated DC cabling kept as short as practicable to limit voltage drop, and fuse the battery connections close to the terminals. The unit isn't grid-connected, so it doesn't need G98 or G99 notification. Give it enough ventilation to avoid thermal shutdown, and have the work carried out by someone competent with 12V DC and 230V AC systems.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053860974880,"sku":"PIN121371110","price":92.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin121371110-1.webp?v=1785421271"},{"product_id":"600w-solar-microinverter-single-mppt","title":"600W Solar Microinverter G98 Single MPPT WIFI | Voltacon VMI600","description":"\u003cp\u003eThe Voltacon VMI600 is a 600W grid-tied micro solar inverter with integrated Wi-Fi monitoring, built for single-panel installations. It tracks the maximum power point of one module rather than an entire array, which helps recover lost yield when shading or mismatched orientation would otherwise drag down a whole string. It is G98 compliant and ENA registered (ZHEJI\/15702\/V1\/A1) for UK grid-connected solar.\u003c\/p\u003e\u003ch2\u003eKey features of this micro solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 600W rated AC output, 620VA peak.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT range\u003c\/strong\u003e, 24-50V, with an operating range of 16-60V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput current\u003c\/strong\u003e, 18A max input, 20A max short circuit current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel compatibility\u003c\/strong\u003e, 400-670W panels, 60-75 full cells or 120-150 half cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 96.5% peak, 96% European.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower quality\u003c\/strong\u003e, power factor greater than 0.99, THD below 3%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP67 enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eA string inverter reads the array as one combined signal, so a shaded or dirty panel pulls the whole line down with it. The VMI600 sits on a single module and tracks its own MPPT independently, so one underperforming panel does not cost the neighbouring ones their output. Built-in Wi-Fi reports generation and status directly from each unit, without a separate monitoring gateway.\u003c\/p\u003e\u003cp\u003eInside, the VMI600 uses GaN MOSFETs with no electrolytic capacitors and no cooling fan, cutting down on the parts most likely to wear out. A high-frequency transformer keeps the PV input electrically isolated from the AC output. Up to 8 units can be connected on a single string using a 24A circuit breaker and 10AWG cable.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuits residential roofs with partial shading, roofs with more than one orientation, building-integrated PV on walls or awkward surfaces, and commercial arrays where module-level monitoring is worth having.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or MCS-accredited installer. G98 notification to the DNO is required before connection, and AC wiring, protection and earthing must follow IET Wiring Regulations. The VMI600 needs a live grid connection to operate and will not run off-grid or alongside off-grid inverters.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eCovered by a 10-year standard warranty, with a 25-year extended warranty available as an option.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053861269792,"sku":"BYM600-WIFI-2","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bym600-wifi-1.webp?v=1785421390"},{"product_id":"victron-12-3000-smart-inverter","title":"Victron 12\/3000 230V Smart Inverter | Pure Sine Wave PIN122300000","description":"\u003cp\u003eThe Victron Inverter 12\/3000 230V Smart is a pure sine wave inverter for off-grid and mobile power setups. It converts 12V DC battery power into 230V AC at 3000VA continuous output, suitable for vehicles, boats, off-grid cabins and backup power systems. Bluetooth built into the unit links to the VictronConnect app for setup and monitoring without extra hardware.\u003c\/p\u003e\u003ch2\u003eKey features of the Victron 12\/3000 Smart inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 3000VA at 230V AC from a 12V DC battery bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave, suited to sensitive electronics and motor loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, built-in Bluetooth for VictronConnect on iOS and Android\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, overload and short-circuit protection with automatic shutdown and recovery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery safety\u003c\/strong\u003e, low battery voltage alarm and shutdown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration\u003c\/strong\u003e, VE.Direct port for connection to Victron system monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis model sits at the top of Victron's 12V inverter range. A 3000W load at 12V draws in excess of 250A from the battery, so cabling, fusing and battery capacity all need to be matched to that discharge rate to avoid excessive voltage drop.\u003c\/p\u003e\u003cp\u003eThe Smart designation refers to the integrated Bluetooth, allowing direct communication with VictronConnect. Installers can adjust low battery shutdown voltage, alarm thresholds and search mode without a separate interface cable, which helps during commissioning in confined vehicle or marine spaces.\u003c\/p\u003e\u003cp\u003eThe VE.Direct port lets the inverter connect into a wider Victron setup, including a Cerbo GX for central monitoring. It is a standalone inverter with no built-in charger; for combined inverter and charger functionality, look at the Victron MultiPlus range instead.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid cabins and remote buildings needing 230V AC from a 12V battery bank\u003c\/li\u003e\n\u003cli\u003eMarine installations without shore power\u003c\/li\u003e\n\u003cli\u003eLarge campervans, motorhomes and HGV sleeper cabs with high AC load needs\u003c\/li\u003e\n\u003cli\u003eBackup power for critical equipment during mains outages\u003c\/li\u003e\n\u003cli\u003eMobile workshops and site vehicles running 230V tools from a battery source\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter 12\/3000 230V Smart unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or accredited installer. DC cable runs must be kept short and rated for sustained currents above 250A, with an appropriately rated DC fuse or breaker fitted close to the battery. The inverter is not grid-connected and does not require G98 or G99 notification, but AC output wiring must comply with BS 7671 regulations. Size the battery bank to support the expected load duration without triggering low-voltage shutdown.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053863006496,"sku":"PIN122300000","price":625.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin122300000-1.webp?v=1785421512"},{"product_id":"12v-off-grid-inverter-1200w-mppt","title":"Conversol 1200W 12V Off Grid Solar Inverter Dual MPPT 230V","description":"\u003cp\u003eThe Conversol 1.5kVA Duo MPPT is an off-grid inverter and charger built for small 12V battery systems. It combines two independent MPPT solar chargers in one chassis with a 230V pure sine wave output, and weighs just 7kg, making it suited to boats, motorhomes, small cabins and other compact off-grid installations running a 12V system.\u003c\/p\u003e\u003ch2\u003eOff grid solar inverter charger key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 1500VA\/1200W, with 3000VA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 12V, with two independent MPPT solar chargers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 1000W, MPPT range 15V to 80VDC, maximum PV open circuit voltage 100VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge current\u003c\/strong\u003e, 40A solar, 100A combined maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput waveform\u003c\/strong\u003e, pure sine wave 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize and weight\u003c\/strong\u003e, 100 x 272 x 355mm, 7kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating range\u003c\/strong\u003e, -20°C to 55°C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Duo MPPT name refers to the two independent MPPT solar charge controllers inside the unit, which let two separate PV strings or panels be managed on their own for maximum energy harvest. That is useful on boats or vehicles where panels sit at different angles.\u003c\/p\u003e\u003cp\u003eThe unit runs on a 12V battery platform and works with standard lead-acid and sealed battery banks common in marine, caravan and small off-grid setups. Pure sine wave output means it suits all loads, including sensitive electronics and motors.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoats and marine off-grid power systems\u003c\/li\u003e\n\u003cli\u003eMotorhomes, caravans and campervans\u003c\/li\u003e\n\u003cli\u003eSmall off-grid cabins and lodges\u003c\/li\u003e\n\u003cli\u003eRemote monitoring and communications equipment\u003c\/li\u003e\n\u003cli\u003eLightweight backup power for 12V systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol 1.5kVA Duo MPPT off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or solar installer. 12V systems carry high currents, so correct cable sizing and fusing matters for fire safety. Do not exceed the maximum PV open circuit voltage of 100VDC, and set battery charge parameters to match the battery chemistry in use. Follow all applicable electrical safety regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053945614624,"sku":"90914111","price":409.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914111-1.webp?v=1785423821"},{"product_id":"conversol-8kw-inverter-charger-48v","title":"Conversol 8kW MAX-II IP65 Off-Grid Inverter Charger 48V","description":"\u003cp\u003eThe Conversol 8kW MAX-II Waterproof is an off-grid inverter and charger rated IP65, built for installations exposed to dust and moisture. It delivers 8kW continuous output with dual MPPT solar input, and up to six units can run in parallel for larger off-grid systems.\u003c\/p\u003e\u003ch2\u003eKey features of this 48v inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 8kW continuous, 16kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 waterproof, suited to outdoor and harsh-environment mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, dual MPPT, up to 8kW total PV input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, 48V bank, up to 150A combined charging current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, USB, RS232, RS485, Wi-Fi, dry contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe IP65 enclosure is what separates this unit from a standard indoor inverter. It can be wall-mounted in plant rooms, outbuildings and exposed locations where a conventional unit would be at risk. The dual MPPT charger accepts strings up to 500VDC open circuit and works across a 90V to 450VDC MPPT range.\u003c\/p\u003e\u003cp\u003ePure sine wave output means it plays well with sensitive loads: variable speed drives, medical equipment, communications gear. With 48V battery input and up to 150A of combined charging, it can support large lead-acid or lithium battery banks.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to outdoor and exposed off-grid installations, agricultural buildings, remote commercial sites and workshops, marine and waterside setups, and backup systems in harsh environments.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol 8kW MAX-II IP65 inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eCommunication cable and accessories\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or accredited solar installer. The IP65 rating applies to the enclosure only, so cable entries need correctly sealed glands to maintain it. Battery cabling, DC fusing and isolators must be sized for 48V high-current operation, and battery voltage and charge settings should be verified before use.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053945745696,"sku":"002135","price":1354.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002135-1.webp?v=1785423843"},{"product_id":"conversol-11kw-off-grid-inverter","title":"Conversol 11kW Ultra-Max Off-Grid Inverter | Dual AC Output 48V","description":"\u003cp\u003eThe Conversol 11kW Ultra-Max is an off-grid inverter and charger built for large residential, commercial and critical backup power systems. Dual AC input and output connections combine with two independent MPPT solar controllers and a combined 12kW of PV input capacity, giving installers a single unit capable of serious off-grid duty with full parallel expansion.\u003c\/p\u003e\u003ch2\u003eKey features of this 11kW off grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 11kW with 22kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual AC architecture\u003c\/strong\u003e, independent inputs and outputs for split or independent load management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, two independent MPPT solar chargers, up to 12kW total PV input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units for large-scale off-grid systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V with 150A combined charging current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave output for sensitive equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommunication and protection\u003c\/h2\u003e\u003cp\u003eThe Ultra-Max communicates via USB, RS232, RS485, Wi-Fi and Bluetooth, and includes built-in dry contact, GFCI, rapid shutdown and AFCI detection support.\u003c\/p\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eBuilt for demanding off-grid environments, the Ultra-Max pairs a high-output inverter with dual MPPT solar chargers and an AC charger in one enclosure. The dual AC design lets installers wire critical and non-critical loads separately, with precise control over priority and switching behaviour.\u003c\/p\u003e\u003cp\u003eMPPT voltage range runs from 90V to 450VDC, with open circuit voltage up to 500VDC, so the system accepts a wide range of PV string configurations. Battery charging supports both lead-acid and lithium chemistries. Up to six units can be paralleled for installations needing 66kW or more of off-grid capacity.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to large residential off-grid solar systems, commercial and agricultural installations, critical backup power for business continuity, remote sites and telecom infrastructure, and high-capacity battery storage systems.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol 11kW Ultra-Max off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eCommunication cable and accessories\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or accredited solar installer. Battery cabling, fusing and DC isolators need to be correctly sized, and battery bank voltage, capacity and chemistry must match the inverter configuration before commissioning. Parallel operation requires compatible firmware and synchronisation cabling. Do not install without reviewing the full manual and complying with applicable wiring regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053947777312,"sku":"002598","price":1101.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002598-1.webp?v=1785423959"},{"product_id":"hybrid-inverter-solis-6kw-wifi","title":"Solis S5-EH1P6K-L 6kW Hybrid Inverter Wi-Fi | Single-Phase","description":"\u003cp\u003eThe Solis S5-EH1P6K-L is a 6kW single-phase hybrid inverter for residential solar and battery storage. It combines integrated Wi-Fi monitoring, AFCI arc-fault protection and a 5kW backup output, switching to backup mode in under 20ms when the grid fails.\u003c\/p\u003e\u003ch2\u003eKey features of this hybrid solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 6kW single-phase rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup power\u003c\/strong\u003e, 5kW output for critical loads during a grid outage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching time\u003c\/strong\u003e, under 20ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT design\u003c\/strong\u003e, dual MPPT with max string input current of 15A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, fanless natural convection, no maintenance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, integrated Wi-Fi with remote control and firmware upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBattery compatibility and energy management\u003c\/h2\u003e\u003cp\u003eThe inverter works with lithium-ion battery systems that include a BMS, and with lead-acid batteries. An intelligent EMS runs 24-hour energy management, tracking PV output and load demand to prioritise self-consumption, then battery storage, then grid export. Multiple working modes let installers set up the system to suit time-of-use tariffs.\u003c\/p\u003e\u003ch3\u003eHow backup mode works\u003c\/h3\u003e\u003cp\u003eOn grid failure the inverter switches to backup within 20ms, drawing on the battery and solar array to supply up to 5kW to essential circuits. A changeover switch is required for the backup output circuit.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential single-phase installations pairing solar generation with battery storage, where backup resilience and self-consumption are the priority. An Eastron 100mA energy meter is included in the box.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolis S5-EH1P6K-L 6kW hybrid inverter\u003c\/li\u003e\n\u003cli\u003eEastron 100mA energy meter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited installer. Grid connection requires G98 notification or G99 application to the DNO, and battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053947908384,"sku":"S5-EH1P6K-L","price":824.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s5-eh1p6k-l-1.webp?v=1785424027"},{"product_id":"victron-rs-48-6000-smart-inverter","title":"Victron Inverter RS 48\/6000 230V Smart | PIN482600000","description":"\u003cp\u003eThe Victron Inverter RS 48\/6000 230V Smart is a 6000VA pure sine wave inverter built for 48V battery banks, outputting 230V AC. It suits off-grid installations, backup power systems and other setups where continuous high-power output and remote monitoring matter.\u003c\/p\u003e\u003ch2\u003eVictron inverter key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 6000VA continuous from a 48V DC bank to 230V AC single phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave output for sensitive loads such as motors and compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth\u003c\/strong\u003e, built-in VictronConnect connectivity for wireless setup, monitoring and firmware updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerControl and PowerAssist\u003c\/strong\u003e, lets the inverter supplement an AC source instead of overloading it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, configurable for lead-acid and lithium battery chemistries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, over-temperature, overload, short circuit and low battery voltage shutdown.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSystem integration\u003c\/h2\u003e\u003cp\u003ePairing the inverter with a Victron GX device, such as a Cerbo GX, extends monitoring to the VRM portal for remote oversight. The RS series uses a high-frequency topology, keeping the unit compact at 11 kg for its power rating.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid residential systems needing high continuous AC output from a 48V bank.\u003c\/li\u003e\n\u003cli\u003eRemote commercial or agricultural sites running AC loads without a grid connection.\u003c\/li\u003e\n\u003cli\u003eBackup power installations covering mains failure from stored battery energy.\u003c\/li\u003e\n\u003cli\u003eMarine and vehicle 48V DC systems with high AC load requirements.\u003c\/li\u003e\n\u003cli\u003eHybrid systems built around Victron GX devices for MPPT, battery and load management.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or accredited installer experienced with DC battery systems and off-grid AC wiring. At 6000VA from a 48V bank, DC cable sizing and fusing matter: use correctly rated cable and a fuse or breaker close to the battery. This is not a grid-tied inverter and does not hold G98 or G99 approval for export to the UK grid.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter RS 48\/6000 230V Smart unit\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053947973920,"sku":"PIN482600000","price":986.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin482600000-1.webp?v=1785424045"},{"product_id":"solis-10kw-hybrid-inverter-hv-battery","title":"Solis 10kW Three-Phase Hybrid Inverter HV Battery | RHI-3P10K-HVES-5G","description":"\u003cp\u003eThe Solis RHI-3P10K-HVES-5G is a 10kW three-phase hybrid solar inverter built for high-voltage lithium battery systems, including the Pylontech Force H2. Running the battery bank at 500-600V rather than a conventional 48V cuts current through the circuit, which lowers cabling losses and lets the battery connection run without a fan. Maximum efficiency reaches 98.4%, and the unit includes dual MPPT tracking, AFCI arc-fault protection, and an intelligent energy management system.\u003c\/p\u003e\u003ch2\u003eKey features of this three-phase hybrid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 10kW three-phase, for on-grid, off-grid, and backup operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, high-voltage DC, 500-600V typical, suited to Pylontech Force H2 and similar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT\u003c\/strong\u003e, 2 trackers with 4 DC inputs, up to 26A per MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC backup\u003c\/strong\u003e, up to 10kW continuous, 16kVA peak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSource switching\u003c\/strong\u003e, automatic transfer within 40ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated AFCI arc-fault detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the energy management works\u003c\/h2\u003e\u003cp\u003eThe EMS coordinates PV, battery, grid, and load in real time, with three operating modes: self-consumption, time-of-use, and off-grid backup. On a time-of-use tariff it can draw from the battery when grid rates are high and recharge from the grid when rates drop, alongside standard peak shaving. The 40ms switching time keeps disruption to critical loads short when the source changes between grid, solar, and battery.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eAimed at commercial three-phase installations pairing solar generation with high-voltage battery storage, particularly where time-of-use optimisation or peak shaving is part of the design. It also suits larger residential or commercial systems built around Pylontech Force H2 or equivalent HV battery packs.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is high-voltage DC equipment and must be installed by a qualified electrician or MCS-accredited solar installer, in line with BS EN 62619, IEC 62619, and local wiring regulations. Three-phase grid connection requires a G99 application and DNO approval. Cabling, isolators, and protection devices must be rated for the battery system voltage in use.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053948072224,"sku":"RHI-3P10K-HVES-5G","price":1569.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-rhi-3p10k-hves-5g-1.webp?v=1785424077"},{"product_id":"conversol-a8-24v-inverter-charger","title":"Conversol A8 3kVA Off-Grid Inverter 24V MPPT Bluetooth","description":"\u003cp\u003eThe Conversol A8 is a 3kVA off-grid inverter and MPPT charger built for 24V battery systems. It combines Bluetooth monitoring, fast AC charging and pure sine wave output, and it can be linked with other units for larger installations.\u003c\/p\u003e\u003ch2\u003eKey features of the Conversol A8 24v inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 3kVA\/3kW, with 6kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery platform\u003c\/strong\u003e, 24V input with integrated MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 1500W, MPPT range 30V to 115VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Bluetooth connectivity via smartphone app\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC charging\u003c\/strong\u003e, up to 80A combined charge current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid\/generator input\u003c\/strong\u003e, accepts 120VAC or 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScalability\u003c\/strong\u003e, parallel operation up to 9 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe A8 is a lightweight unit in the Conversol range, suited to properties, vehicles or installations where 3kW of continuous output is enough and the battery bank runs at 24V. Bluetooth monitoring lets you check status and adjust settings without a wired connection, useful where the unit is mounted somewhere awkward to reach.\u003c\/p\u003e\u003cp\u003eBecause it accepts both 120V and 230V AC supplies, the A8 fits a range of grid or generator setups, and fast charging helps recover battery capacity quickly when solar alone isn't enough. Linking up to 9 units in parallel takes the platform to 27kW for bigger 24V off-grid systems.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid residential systems on 24V battery platforms\u003c\/li\u003e\n\u003cli\u003eBoats, motorhomes and mobile power systems\u003c\/li\u003e\n\u003cli\u003eSmall commercial off-grid installations\u003c\/li\u003e\n\u003cli\u003eCabins, eco-lodges and remote properties\u003c\/li\u003e\n\u003cli\u003eBackup power systems needing parallel scalability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol A8 3kVA off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or solar installer. 24V systems run high currents at relatively low voltage, so correct cable sizing and fusing matters. Do not exceed the specified open circuit PV voltage of 145VDC, and make sure battery type and charge voltage settings match the battery chemistry fitted. Follow all applicable wiring regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053948104992,"sku":"90914122","price":682.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914122-1.webp?v=1785424088"},{"product_id":"victron-24-5000-ve-bus-inverter","title":"Victron Inverter 24\/5000 230V VE.Bus | PIN245020000","description":"\u003cp\u003eThe Victron Inverter 24\/5000 230V VE.Bus (PIN245020000) is a 5000VA pure sine wave inverter for 24V DC battery systems, built to supply 230V AC to demanding loads in off-grid, marine and vehicle installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 5000VA at 230V AC pure sine wave.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC input\u003c\/strong\u003e, runs from a 24V nominal battery bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Bus interface\u003c\/strong\u003e, links with other Victron VE.Bus units, GX devices and remote panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel and three-phase capable\u003c\/strong\u003e, stack multiple VE.Bus inverters for higher capacity or three-phase output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVEConfigure compatible\u003c\/strong\u003e, set thresholds, transfer settings and protection parameters through Victron's software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, built-in over-temperature, overload and short-circuit protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 28 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid cabins, lodges and remote buildings needing high-power AC from a battery bank, and to marine vessels running 24V DC systems that need 230V AC output. It also fits large vehicle and mobile installations such as coaches, expedition vehicles and broadcast units, and backup power for commercial or industrial premises with an unreliable mains supply. Multiple units can be stacked using VE.Bus parallel or three-phase configuration, and the system can be monitored through a Cerbo GX and the VRM portal.\u003c\/p\u003e\u003ch3\u003eStandalone inverter\u003c\/h3\u003e\u003cp\u003eThis is an inverter only, not an inverter-charger: it has no built-in battery charger or AC transfer switch, so charging needs to be handled separately, by a solar charge controller or a dedicated charger.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter 24\/5000 230V VE.Bus unit (PIN245020000)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe 24\/5000 draws high continuous current at full load, so DC cabling, fusing and busbars must be sized correctly. Installation should be carried out by a qualified electrician or accredited installer familiar with DC systems and Victron equipment. Any connection to the mains supply must meet current UK wiring regulations (BS 7671) and relevant DNO requirements. Configuring the VE.Bus interface requires Victron's VEConfigure software and an MK3-USB adapter or suitable interface cable.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053948137760,"sku":"PIN245020000","price":1343.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin245020000-1.webp?v=1785424099"},{"product_id":"multiplus-ii-8000va-inverter-charger","title":"Victron MultiPlus-II 48\/8000\/110-100 Inverter Charger 230V | PMP482805000","description":"\u003cp\u003eThe Victron MultiPlus-II 48\/8000\/110-100 combines a pure sine wave inverter and a multi-stage battery charger in one unit, rated for 8000VA continuous output from a 48V DC battery bank. Built-in components include a 110A charger and a 100A AC transfer switch, giving the flexibility of a full power inverter charger for off-grid, backup and hybrid solar systems.\u003c\/p\u003e\u003ch2\u003ePower inverter charger features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 8000VA \/ 8000W, with a 16000W peak surge rating for motor starting and demanding loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery charging\u003c\/strong\u003e, 110A adaptive four-stage charger (bulk, absorption, float, storage), suitable for lead-acid and lithium batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC transfer switch\u003c\/strong\u003e, 100A rating for changeover between grid, generator and inverter power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerAssist and PowerControl\u003c\/strong\u003e, supplements limited AC input with battery power, or caps AC input draw to a set limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in battery monitor\u003c\/strong\u003e, tracks state of charge without a separate device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Bus communication\u003c\/strong\u003e, integrates with GX devices for monitoring via VRM or Cerbo GX.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eParallel and three-phase operation\u003c\/h2\u003e\u003cp\u003eUp to six MultiPlus-II units can be connected in parallel or configured for three-phase supply using VE.Bus cabling, with no extra hardware required beyond the units themselves. Charge and discharge parameters, along with the programmable relay, are set through VEConfigure software.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe 48\/8000\/110-100 suits off-grid residential and commercial solar installations that need high continuous output, and hybrid systems with grid or generator backup where PowerAssist manages a limited AC input.\u003c\/p\u003e\u003ch2\u003eWeight and connections\u003c\/h2\u003e\u003cp\u003eThe unit weighs 40.8 kg and outputs 230V AC.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053948760352,"sku":"PMP482805000","price":1081.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pmp482805000-1.webp?v=1785424173"},{"product_id":"solis-mini-700-4g-inverter","title":"Solis Mini 700-4G 0.7kW Single Phase Grid Tie Inverter IP65 | Solis","description":"\u003cp\u003eThe Solis Mini 700-4G is a compact 0.7kW single-phase grid-tie solar inverter built for small PV installations. It converts DC power from the array into 230V\/50Hz AC for use in the property or export to the grid, starting up at just 60V so it begins generating at first light and continues in low irradiance conditions. It carries an IP65 rating for outdoor installation.\u003c\/p\u003e\u003ch2\u003eKey features of the Solis Mini 700-4G\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 0.7kW for small grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart-up voltage\u003c\/strong\u003e, ultra-low 60V, generating power from early morning and in low light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT efficiency\u003c\/strong\u003e, dynamic tracker delivering above 99% under all conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArray compatibility\u003c\/strong\u003e, systems up to 900Wp, panels with 36, 54 or 72 cells\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput current range\u003c\/strong\u003e, 0 to 8A, suited to modern high-power panel designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, QNS anti-islanding as standard, DRM integrated, IP65 rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe dynamic MPPT tracker continuously identifies the maximum power point of the connected array, achieving above 99% MPP output regardless of panel make, cell count or configuration. The wide 0 to 8A current input range makes it compatible with modern higher-efficiency panel designs. QNS anti-islanding protection is fitted as standard, disconnecting the inverter automatically from the grid during a power failure. The unit comes with a 5-year standard warranty.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall residential grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003eInstallations with a small number of panels for self-consumption or grid export\u003c\/li\u003e\n\u003cli\u003eRetrofit additions to existing systems that need a dedicated small-string inverter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThis inverter must be installed by a qualified electrician or MCS-accredited solar installer. In the UK, G98 notification to the DNO is required before grid connection, and all DC isolators, AC protection and earthing must comply with BS 7671 and the applicable MCS installation standard. Do not attempt DIY connection of grid-tied equipment.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053950136608,"sku":"999006","price":407.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999006-1.webp?v=1785424217"},{"product_id":"conversol-inverter-cooling-fan","title":"Cooling Fan DC 12V for 7.2kW \u0026 8kW Max Conversol Inverter","description":"\u003cp\u003eReplacement DC cooling fan for the 7.2kW and 8kW Max Conversol off-grid solar inverters, part number DZ08038B12HH. It connects directly to the inverter main board using a 4-pin connector, so no modification is needed for fitting.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, for 8kW Max and 7.2kW Conversol off-grid inverters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number\u003c\/strong\u003e, DZ08038B12HH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, DC 12V, 0.9A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector\u003c\/strong\u003e, 4-pin, wired for direct connection to the inverter main board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, three power and control wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting\u003c\/strong\u003e, direct replacement, no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis fan is an inverter spare part for owners of the 7.2kW or 8kW Max Conversol who need to replace a worn or failed cooling fan. Check the part number printed on your existing fan before ordering to confirm it matches DZ08038B12HH.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003ePower down and fully isolate the inverter before removing any internal components. If you are unsure how to proceed, have the fan replaced by a qualified electrician or an inverter service technician.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053950267680,"sku":"DZ08038B12HH","price":26.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-dz08038b12hh-1.webp?v=1785424273"},{"product_id":"solar-water-pump-inverter-11kw-mppt","title":"Aspire NERO 11kW Solar Water Pump Inverter MPPT 800V 3 Phase","description":"\u003cp\u003eThe Aspire NERO is a dedicated 11kW solar water pump inverter driver with an integrated MPPT controller. It runs a three-phase pump motor directly from solar panels without any battery storage, and is built for irrigation, boreholes, farms and remote sites where dependable daylight-hours pumping matters. An auxiliary AC input lets you bring in grid or generator power when solar irradiation isn't enough on its own.\u003c\/p\u003e\u003ch2\u003eKey features of this 3 phase solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-free operation\u003c\/strong\u003e, runs directly from solar panels, no battery storage required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated MPPT\u003c\/strong\u003e, continuously tracks the maximum available solar power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor output\u003c\/strong\u003e, three-phase, for water pumps and irrigation systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax DC input voltage\u003c\/strong\u003e, 800V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax PV array power\u003c\/strong\u003e, 17,600W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start\u003c\/strong\u003e, reduces water hammer and mechanical stress on the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, RS485 port for remote monitoring, with LCD and LED indicators showing real-time data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary AC input\u003c\/strong\u003e, accepts grid or generator supply when sunlight is limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe integrated MPPT pulls the maximum available power from the PV array at whatever irradiance level is present, feeding it straight to the three-phase motor drive. It can start pumping from a fraction of full solar power, so it keeps working in early morning and late afternoon light when a simpler on\/off system would sit idle. If irradiation drops too low to sustain the pump, the auxiliary AC input takes over from a grid connection or diesel generator. Soft start ramps the motor speed up gradually, easing mechanical shock on the pump and pipework.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAgricultural irrigation and livestock watering\u003c\/li\u003e\n\u003cli\u003eBorehole and groundwater extraction on farms and remote sites\u003c\/li\u003e\n\u003cli\u003eIndustrial and municipal water supply pumping\u003c\/li\u003e\n\u003cli\u003eThree-phase pump installations where mains power is unavailable or costly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis unit drives three-phase pump motors and is not a home energy storage or battery inverter. The PV string voltage needs to stay within the inverter's operating window across the expected temperature and irradiance range on site. Professional installation is required for wiring, protection and commissioning, and it must not be connected to a battery bank.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053950300448,"sku":"90914170","price":472.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914170-1.webp?v=1785424292"},{"product_id":"solis-dual-mppt-3-6kw-inverter","title":"Solis 3.6kW Dual MPPT Single Phase Grid Tie Inverter | S6-GR1P3.6K-DC","description":"\u003cp\u003eThe Solis S6-GR1P3.6K-DC is a 3.6kW single-phase grid-tie inverter built for residential solar PV systems. It uses a dual MPPT design, has an integrated DC switch and export power manager, and carries an IP66 rating for outdoor mounting.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 3600W (3.6kW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT inputs\u003c\/strong\u003e, 2 independent trackers, useful for roofs with different orientations or partial shading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax input current\u003c\/strong\u003e, 14A per string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAFCI protection\u003c\/strong\u003e, integrated arc-fault detection shuts down the affected string before a fault develops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExport Power Manager (EPM)\u003c\/strong\u003e, integrated, for DNO export limitation under G98\/G99\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress protection\u003c\/strong\u003e, IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax efficiency\u003c\/strong\u003e, 97.3%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 11.2kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eGinlong Solis has manufactured solar inverters since 2005 and is one of the larger inverter producers worldwide. The S6 series is its current residential platform, aimed at UK and European grid-connected installations. The dual MPPT strings are managed independently, so shaded or differently-angled arrays can still be handled by one unit. The AFCI function watches the DC circuit continuously and isolates a string if it detects an arc fault. The EPM lets an installer curtail export to a set level where a DNO connection agreement requires it.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential single-phase grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003eRoofs with two orientations or partial shading needing independent MPPT strings\u003c\/li\u003e\n\u003cli\u003eInstallations where AFCI protection and export limitation are required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited installer. G98 notification or G99 application to the DNO is required before connecting to the grid in the UK. DC isolators, AC protection, surge protection and earthing must meet BS 7671 and the relevant MCS installation standard. This is not a DIY-connection product.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053950333216,"sku":"S6-GR1P3.6K-DC","price":418.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p3-6k-dc-1.webp?v=1785424307"},{"product_id":"off-grid-inverter-terminal-6mm","title":"Off-Grid Inverter Power Terminal 2-Pin\/3-Pin 6mm² Cable | Voltacon","description":"\u003cp\u003eThis replacement power terminal fits a range of off grid inverters, giving you a direct swap when the original connector wears out or fails. It is offered in three variants: a 2-pin PV terminal, a 3-pin terminal for 5kW inverters, and a 3-pin terminal for 8kW and 11kW inverters. Each accepts cable up to 6mm² for 230V AC live, neutral and earth connections.\u003c\/p\u003e\u003ch2\u003eKey features for off grid inverters\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal types\u003c\/strong\u003e, 2-pin PV terminal and 3-pin terminal, covering 5kW and 8kW\/11kW inverter models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable capacity\u003c\/strong\u003e, accepts up to 6mm² power cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, suitable for 230V AC live, neutral and earth connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, direct replacement for compatible Conversol, MPP Solar and Voltronic inverters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoosing the right variant\u003c\/h2\u003e\u003cp\u003eThree versions cover different inverter capacities, so check your existing terminal or inverter model before ordering. Fitting the wrong variant means the connector won't match your inverter's terminal block.\u003c\/p\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eIsolate the inverter fully from both DC and AC sources before removing or replacing any terminal. Confirm the variant matches your specific inverter model. This is a wiring task and should be carried out by a qualified electrician.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"2P PV Terminal","offer_id":52053951447328,"sku":"27-030118-01G","price":3.78,"currency_code":"GBP","in_stock":true},{"title":"3P 5kW Inverters Terminal","offer_id":52053951480096,"sku":"27-030161-01G","price":4.31,"currency_code":"GBP","in_stock":true},{"title":"3P 8kW \/ 11kW Inverters Terminal","offer_id":52053951512864,"sku":"27-030405-00G","price":4.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-27-030118-01g-1.webp?v=1785424425"},{"product_id":"24v-off-grid-inverter-mppt-charger","title":"3.6kW 24V Off Grid Inverter MPPT Charger 80A | Conversol VM","description":"\u003cp\u003eThe Conversol VM 3.6kW is an off-grid inverter and MPPT charger built around a 24V battery bank. It delivers 3600W of continuous output with a 7200VA surge rating, and pairs a 120A MPPT solar charger with support for up to 4000W of PV input, making it a compact option for residential and small commercial off-grid solar systems.\u003c\/p\u003e\u003ch2\u003eKey features of this 24v off grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 3600W with 7200VA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery platform\u003c\/strong\u003e, 24V input with a 120A MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 4000W, MPPT range 120V to 450VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen circuit PV voltage\u003c\/strong\u003e, up to 500VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, LED display for real-time status\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, USB, RS232, RS485, Wi-Fi, dry contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe VM range sits among Conversol's more capable compact off-grid units, joining a high-current MPPT solar charger with a 3.6kW pure sine wave inverter in a wall-mount enclosure. The 120A MPPT charging current helps recharge larger battery banks quickly, and the 120V to 450VDC MPPT window gives installers room to configure the PV array to suit the site.\u003c\/p\u003e\u003cp\u003eAn AC charger adds a further 100A, taking the combined maximum charging current to 120A. That combination suits installations where rapid battery recovery matters. The LED display shows operational status without a separate monitoring device.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential off-grid solar systems on 24V batteries\u003c\/li\u003e\n\u003cli\u003eAgricultural and rural off-grid properties\u003c\/li\u003e\n\u003cli\u003eCabins, workshops and outbuildings\u003c\/li\u003e\n\u003cli\u003eMobile and semi-permanent off-grid installations\u003c\/li\u003e\n\u003cli\u003eBackup power systems with solar charging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol VM 3.6kW off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or accredited solar installer. The maximum PV open circuit voltage of 500VDC must not be exceeded, and battery cabling, fusing and DC isolators need to be correctly sized for 24V high-current operation. Confirm battery type and capacity against the charge settings before commissioning, and follow all applicable electrical regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053952200992,"sku":"002192","price":573.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002192-1.webp?v=1785424460"},{"product_id":"48v-8kw-off-grid-inverter-charger","title":"8kW Off-Grid Solar Inverter Charger 48V Dual MPPT | Conversol Max","description":"\u003cp\u003eThe Conversol Max 8kW is a fourth-generation off-grid solar inverter and battery charger delivering 8kW continuous pure sine wave output at 48V. Two independent MPPT chargers cover a 90-450V DC PV input range, and the unit includes built-in Wi-Fi and Bluetooth for remote monitoring, an RGB status indicator, and BMS compatibility with Pylontech and other lithium batteries.\u003c\/p\u003e\u003ch2\u003eKey features of this 48v inverter charger\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 8kW continuous pure sine wave AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT chargers\u003c\/strong\u003e, two independent inputs, 90-450V DC range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, Pylontech US3000C, US5000C (legacy US2000C), and other lithium batteries, plus AGM, GEL, forklift, leisure and flooded lead-acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, built-in Wi-Fi for Android and iOS, plus Bluetooth for local wireless monitoring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl panel\u003c\/strong\u003e, detachable LCD panel that can be mounted remotely\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units, giving 48kW single or three-phase\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt can also run without a battery bank connected, provided solar input is sufficient, and it offers direct 48V DC load connections for items such as fans, lighting or a router, bypassing inverter conversion for those small constant loads. A scheduled AC charging timer lets you set charging windows around an economy tariff.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to large off-grid homes, farms with pumps or refrigeration, and off-grid commercial or light industrial sites. The parallel operation option makes it a practical choice where a system needs to scale or have redundancy built in.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is an 8kW system and must be installed by a qualified electrician or solar installer, with correct cable sizing, fusing, isolators, surge protection and earthing. Battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053955608864,"sku":"90914123","price":1144.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914123-1.webp?v=1785424554"},{"product_id":"48v-off-grid-inverter-5kw-parallel","title":"Conversol V5 Super 5kW Off Grid Inverter 48V 140A MPPT","description":"\u003cp\u003eThe Conversol V5 Super is a 5kW off-grid solar inverter and battery charger built around a 140A MPPT supercharger. It combines Bluetooth monitoring, a removable LCD control panel, and parallel capability for up to 9 units, making it suited to off-grid homes, farms, workshops, and any installation that might need to scale up later.\u003c\/p\u003e\u003ch2\u003eOff grid inverter key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 5kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, 140A MPPT supercharger for faster battery recharge from solar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC, float charge configurable up to 64V for wider battery compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 9 units for single and three-phase configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control panel\u003c\/strong\u003e, removable LCD module, installable up to 20 metres from the inverter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, integrated Bluetooth with the WatchPower Android app, plus USB On-the-Go and RS485 BMS communication for lithium batteries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, farms, and workshops that need high solar charging capacity, and to systems that may need to expand later through parallel operation. Also useful where the control panel needs to sit away from the inverter itself, or where the battery bank calls for a higher float charge voltage than standard. AC or PV input priority is configurable via the control module, with grid or generator backup available when solar and battery cannot meet demand.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eMust be installed by a qualified electrician or solar installer. Battery systems must comply with BS EN 62619 and local building regulations. Float charge voltage has to be set correctly for the battery chemistry in use, as incorrect charging voltages can damage battery cells. This is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053955641632,"sku":"90914114","price":716.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914114-1.webp?v=1785424571"},{"product_id":"multiplus-ii-15kva-inverter-charger","title":"Victron MultiPlus-II 48\/15000\/200-100 Inverter Charger 230V | PMP483150000","description":"\u003cp\u003eThe Victron MultiPlus-II 48\/15000\/200-100 230V is a battery charger with inverter built into a single unit, rated for 15,000VA continuous output from a 48V battery bank. It combines a pure sine wave inverter, a 200A charger and an AC transfer switch, making it suited to demanding off-grid, backup and hybrid solar installations that need high continuous power and fast recharging.\u003c\/p\u003e\u003ch2\u003eKey features of this battery charger with inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 15,000VA continuous, pure sine wave, 230V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharger\u003c\/strong\u003e, 200A output with adaptive charge algorithm for 48V battery banks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input limit\u003c\/strong\u003e, 100A, configurable via VE.Bus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerAssist and PowerControl\u003c\/strong\u003e, draws extra power from the battery when demand exceeds the AC input limit, preventing generator or shore power overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransfer switch\u003c\/strong\u003e, integrated, with fast changeover for UPS style backup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, VE.Bus connectivity for configuration and integration with GX devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis is one of the largest single unit inverter chargers in the Victron range. At 15kVA it can supply substantial loads directly from a 48V bank, and the 200A charger recharges a large battery quickly from generator or grid power, cutting generator run time in hybrid systems. PowerAssist lets a smaller generator work alongside the battery without tripping, by supplying any shortfall from storage rather than the generator itself. PowerControl performs the same role on a fixed limit grid or shore connection.\u003c\/p\u003e\u003cp\u003eMultiple units can run in parallel, or in split phase and three phase arrangements for commercial sites. Configuration and monitoring go through VE.Bus, with full integration into Victron GX devices such as the Cerbo GX and remote access via the VRM portal.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePMP483150000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInverter output power\u003c\/td\u003e\n\u003ctd\u003e15,000VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery voltage\u003c\/td\u003e\n\u003ctd\u003e48V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC output voltage\u003c\/td\u003e\n\u003ctd\u003e230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger output current\u003c\/td\u003e\n\u003ctd\u003e200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC input current limit\u003c\/td\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC output frequency\u003c\/td\u003e\n\u003ctd\u003e50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e76.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e8719076056324\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eLarge off-grid residential or commercial sites needing 15kVA continuous output; critical backup systems requiring fast AC transfer; hybrid solar installations with generator backup using PowerAssist; three phase commercial systems built from multiple units; industrial sites with high peak demand on 48V storage; marine and vehicle systems running large 48V DC banks with 230V AC loads.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron MultiPlus-II 48\/15000\/200-100 230V inverter charger unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eAt 76.5 kg the unit needs careful handling and secure mounting. Installation should be carried out by a qualified electrician experienced with high-capacity inverter systems, and the 48V battery connections must be correctly fused and cabled to the manufacturer's specification. Grid-connected or export-capable UK installations must meet G98 or G99 requirements.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053955674400,"sku":"PMP483150000","price":1801.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pmp483150000-1.webp?v=1785424585"},{"product_id":"cooling-fan-assembly-max-ii-inverter","title":"Cooling Fan Assembly for 8kW Max-II Inverter | Voltacon","description":"\u003cp\u003eReplacement three-fan cooling assembly for 8kW Max-II off-grid solar inverters, fitting MPP Solar, Voltronic and Voltacon variants. The kit is supplied complete with AC input\/output terminals and the data and power cables needed for all three fans, so the whole assembly can be swapped in one go.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan count\u003c\/strong\u003e, three-fan cooling assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, fits 8kW Max-II inverters from MPP Solar, Voltronic and Voltacon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals included\u003c\/strong\u003e, AC input and output terminals supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabling included\u003c\/strong\u003e, data and power cables for all three fans\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e, direct replacement assembly with all components supplied together\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed as a spare part when replacing worn or failed cooling fans inside an 8kW Max-II off-grid inverter. As it is a direct replacement set, it covers the full fan assembly rather than a single fan, which keeps airflow balanced across the unit after fitting.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003ePower down the inverter fully and isolate it from both DC and AC sources before opening the case to fit this assembly. If you are not confident carrying out internal inverter work, have it done by a qualified electrician or an inverter service technician.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053955739936,"sku":"coolingfan-assembly-8kwmaxii","price":87.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-coolingfan-assembly-8kwmaxii-1.webp?v=1785424599"},{"product_id":"elios-5kw-grid-tie-inverter","title":"5kW Solar Grid Tie Inverter MPPT Wi-Fi IP65 | Elios","description":"\u003cp\u003eThe Elios 5000W solar grid tie inverter turns DC power from a solar array into 230V\/50Hz AC for use in the property or export to the grid. It uses high-efficiency MPPT tracking, gives a pure sine wave output, and carries an IP65 rating for outdoor mounting. A fanless design keeps operation quiet, and built-in anti-islanding protection disconnects the unit automatically if the grid fails.\u003c\/p\u003e\u003ch2\u003eKey features of this solar grid tie inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 5kW (5000W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT efficiency\u003c\/strong\u003e, up to 99.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput waveform\u003c\/strong\u003e, pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP65 rated for outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, fanless, natural convection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Wi-Fi and USB communications, viewable via mobile app\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExport control and grid safety\u003c\/h2\u003e\u003cp\u003eAnti-islanding protection shuts the inverter down automatically on grid failure, stopping backfeed to the network. Where a DNO requires export limitation, the included current sensor clamp measures household consumption in real time and modulates output between 0W and 5kW, with the option to set export to zero. AC input priority is configurable via the LCD.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential and small commercial on-grid solar PV systems, including installations where export limiting is required by the DNO, and outdoor locations where the IP65 rating matters.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis is grid-connected equipment and must be installed by a qualified electrician or solar installer. UK installations must meet G98 or G99 notification requirements, with DC isolators, AC protection and earthing carried out to BS 7671 and MCS standards. Not for DIY installation.\u003c\/p\u003e","brand":"Elios","offers":[{"title":"Default Title","offer_id":52053955772704,"sku":"9005111","price":472.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-9005111-1.webp?v=1785424616"},{"product_id":"solis-5kw-hybrid-inverter-afci","title":"5kW Hybrid Solar Inverter AFCI Fanless | Solis S5-EH1P5K-L","description":"\u003cp\u003eThe Solis S5-EH1P5K-L is a 5kW single-phase hybrid inverter built for residential solar and battery storage. It combines AFCI arc-fault protection, a 5kW backup output, and fanless natural cooling with a backup switching time under 20ms. It works with lithium-ion batteries fitted with a BMS, and with lead-acid batteries.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 5000W (5kW) single-phase rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup power\u003c\/strong\u003e, 5kW available to critical loads during a grid outage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching time\u003c\/strong\u003e, under 20ms when moving to backup mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT design\u003c\/strong\u003e, 2 MPPTs, max string input current 15A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, fanless natural convection, no moving parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated AFCI arc-fault detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eIn normal operation the inverter behaves as a grid-tie unit, sending solar power to household loads first, then to battery storage, then exporting any surplus. If the grid fails, it switches to backup mode within 20ms and supplies up to 5kW from battery and solar to the loads on the backup circuit. A changeover switch is required for this backup output.\u003c\/p\u003e\u003cp\u003eAn intelligent EMS runs continuously, letting the system be set to different working modes depending on tariff structure, household consumption, and battery state. It monitors the PV plant around the clock and adjusts automatically as conditions change. Remote control and firmware upgrades are also supported.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential single-phase hybrid solar and battery systems\u003c\/li\u003e\n\u003cli\u003eSelf-consumption setups that need backup resilience during grid failure\u003c\/li\u003e\n\u003cli\u003eInstallations managing time-of-use electricity tariffs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or an MCS-accredited solar installer. A changeover switch is needed for the backup output circuit, and grid connection requires a G98 notification or G99 application to the DNO. Battery systems must meet BS EN 62619 and applicable building regulations.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053959901472,"sku":"S5-EH1P5K-L","price":724.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s5-eh1p5k-l-1.webp?v=1785424718"},{"product_id":"8kw-max-ii-main-board-48v","title":"Main Board Replacement for 8kW MAX-II 48V Inverter | Voltacon","description":"\u003cp\u003eBrand new main PCB for 8kW MAX-II 48V off-grid solar inverters, supplied as a direct fit replacement. It fits Voltronic, MPP Solar and Conversol variants of the 8kW MAX-II range and needs no firmware update once installed.\u003c\/p\u003e\u003ch2\u003eKey features for this 8kw inverter board\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard type\u003c\/strong\u003e, brand new main printed circuit board for 8kW MAX-II 48V inverters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, Voltronic, MPP Solar and Conversol 8kW MAX-II variants\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment\u003c\/strong\u003e, direct fit replacement, no firmware update required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply condition\u003c\/strong\u003e, fully assembled board ready for installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart reference\u003c\/strong\u003e, CPCBA MAIN\/AXPERT MAX\/VOL 7.2KVA\/8.0KVA 230V W\/O COMM CE\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis board is built for the 48V version of the 8kW MAX-II inverter only. Check your inverter's model plate and battery voltage before ordering, since the MAX-II range covers more than one voltage variant and the boards are not interchangeable across them.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eIsolate the inverter fully from both DC and AC sources before opening the case. Fitting a main board involves working inside a live electrical enclosure, so this replacement should be carried out by a qualified electrician or an inverter service technician rather than as a DIY task.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053959934240,"sku":"31-550555-05G","price":472.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-31-550555-05g-1.webp?v=1785424731"},{"product_id":"smart-solar-inverter-rs-48-6000","title":"Victron Inverter RS 48\/6000 230V Smart Solar MPPT | PIN482601000","description":"\u003cp\u003eThe Victron Inverter RS 48\/6000 230V Smart Solar combines a 6000VA inverter and an integrated MPPT solar charge controller in one enclosure, built for 48V off-grid and hybrid battery systems. It suits professional installers working on residential, commercial and industrial off-grid projects who want a single unit instead of separate inverter and charge controller components.\u003c\/p\u003e\u003ch2\u003eKey features of the Victron Inverter RS 48\/6000 Smart Solar\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 6000VA continuous at 230V AC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated charge controller\u003c\/strong\u003e, Smart Solar MPPT built in, so a separate solar controller is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery voltage\u003c\/strong\u003e, 48V DC, compatible with lead-acid and lithium chemistries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, VE.Direct and Bluetooth for monitoring and setup through the Victron Connect app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 12 kg, in a wall-mounted enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC output\u003c\/strong\u003e, 230V, suitable for standard single-phase European and UK loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eHousing the inverter and MPPT charge controller together cuts wiring and cabinet space compared with fitting the two as separate units. The 48V DC input suits larger battery banks, where lower current draw at a given power level helps with cable sizing and heat losses.\u003c\/p\u003e\u003cp\u003eThe Smart Solar MPPT algorithm tracks the maximum power point of the connected PV array across changing irradiance and temperature. VE.Direct and Bluetooth connectivity allow the unit to sit within Victron's GX monitoring ecosystem and be configured remotely through VictronConnect, useful for installs needing ongoing monitoring or mobile commissioning.\u003c\/p\u003e\u003cp\u003eAt 12 kg one installer can wall-mount it unassisted, though the 6000VA output class means it will usually be paired with substantial battery and PV capacity. Confirm fusing, cable sizing and battery compatibility against Victron's installation documentation before commissioning.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid residential systems with 48V lithium or lead-acid battery banks.\u003c\/li\u003e\n\u003cli\u003eRemote commercial or agricultural sites needing AC power from solar.\u003c\/li\u003e\n\u003cli\u003eMarine and vehicle setups using a 48V DC bus with 230V AC output.\u003c\/li\u003e\n\u003cli\u003eBackup power systems where solar charging and inverting must run independently of the grid.\u003c\/li\u003e\n\u003cli\u003eRetrofits replacing separate inverter and charge controller units to free up enclosure space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter RS 48\/6000 230V Smart Solar unit (PIN482601000)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis unit operates at 48V DC and 230V AC and must be installed by a qualified electrician or MCS-accredited installer. Battery connections, PV wiring, fusing and earthing must meet BS 7671 and applicable local regulations. For installations connected to or working alongside the grid, G98 or G99 notification requirements should be checked with your DNO. Lithium battery integration may need extra BMS communication setup within the Victron ecosystem.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053959967008,"sku":"PIN482601000","price":1205.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin482601000-1.webp?v=1785424741"},{"product_id":"quattro-ii-inverter-charger-5000va","title":"Victron Quattro-II 48\/5000\/70-50\/50 Inverter Charger 230V | QUA482504010","description":"\u003cp\u003eThe Victron Quattro-II 48\/5000\/70-50\/50 230V is a 5000VA inverter charger built around a 48V battery bank, delivering 230V AC output with two independent AC inputs for grid and generator connections. It suits off-grid, backup and hybrid power systems that need reliable AC output alongside flexible charging.\u003c\/p\u003e\u003ch2\u003eInverter with charger for 48V systems\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 5000VA continuous at 230V AC from a 48V DC bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery charger\u003c\/strong\u003e, 70A output with adaptive multi-stage charging for lead-acid and lithium batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual AC inputs\u003c\/strong\u003e, two 50A AC inputs allow connection of grid or shore power and a generator, with automatic transfer switching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC pass-through\u003c\/strong\u003e, two 50A outputs for separate load circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerControl and PowerAssist\u003c\/strong\u003e, limits total AC draw and draws on battery power to supplement mains or generator supply when demand exceeds the input current limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, VE.Bus interface for monitoring and configuration through VictronConnect or Venus OS devices, including parallel and three-phase operation with multiple units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Quattro-II keeps the dual AC input layout of the original Quattro range with updated internals. Either AC input can be prioritised over the other, and the transfer switch operates without interrupting connected loads, which matters where a generator backs up grid power or where a vessel has both shore power and an onboard generator.\u003c\/p\u003e\u003cp\u003eThe 70A charger adjusts charge current based on battery temperature (with an optional sensor) and state of charge. PowerAssist draws from the battery to supplement a current-limited AC source, such as a small generator or restricted shore supply, rather than overloading it.\u003c\/p\u003e\u003cp\u003eWeighing 28.35 kg, the unit requires two people to install along with appropriate mounting provisions.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid residential and commercial systems with a 48V battery bank and generator backup.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat installations needing dual AC source management between shore power and an onboard generator.\u003c\/li\u003e\n\u003cli\u003eRemote telecoms, agricultural or industrial sites with unreliable or absent grid power.\u003c\/li\u003e\n\u003cli\u003eBackup power systems requiring uninterrupted AC output during mains failure.\u003c\/li\u003e\n\u003cli\u003eMulti-unit parallel or three-phase installations for higher output capacity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053960032544,"sku":"QUA482504010","price":899.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-qua482504010-1.webp?v=1785424760"},{"product_id":"easysolar-ii-48-3000-mppt-250-70-gx","title":"Victron EasySolar-II 48\/3000\/35-32 MPPT 250\/70 GX Inverter Charger | PMP482307010","description":"\u003cp\u003eThe Victron EasySolar-II 48\/3000\/35-32 MPPT 250\/70 GX is an all-in-one inverter charger that puts a 3000VA inverter, an MPPT solar charge controller and an AC battery charger into one wall-mounted enclosure. Model PMP482307010 also carries a built-in GX device for monitoring, so it suits off-grid systems, home storage and self-consumption setups where panel space is limited.\u003c\/p\u003e\u003ch2\u003eVictron EasySolar-II 48\/3000\/35-32 MPPT 250\/70 GX features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e 3000VA \/ 2400W pure sine wave at 230V AC, from a 48V battery bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e integrated 250\/70 MPPT controller, up to 250V PV open-circuit voltage and 70A charge current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC charging\u003c\/strong\u003e 32A battery charger with an adaptive algorithm for lead-acid and lithium chemistries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e built-in GX device with VRM portal access and DVCC support, no separate Cerbo GX or Color Control unit needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerAssist\u003c\/strong\u003e draws extra power from the battery when load demand exceeds a limited shore or generator supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e VE.Bus, VE.Direct and VE.Can accessory support, configurable through the VictronConnect app or the GX interface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePMP482307010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInverter output power\u003c\/td\u003e\n\u003ctd\u003e3000VA \/ 2400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery voltage\u003c\/td\u003e\n\u003ctd\u003e48V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC output voltage\u003c\/td\u003e\n\u003ctd\u003e230V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC charger current\u003c\/td\u003e\n\u003ctd\u003e32A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPPT charge controller\u003c\/td\u003e\n\u003ctd\u003e250\/70 (250V max PV VOC, 70A max charge current)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGX device\u003c\/td\u003e\n\u003ctd\u003eIntegrated (VRM, DVCC, VE.Bus, VE.Direct, VE.Can)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e28 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e8719076045786\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eOff-grid homes and rural properties, home storage systems prioritising self-consumption, narrowboats and larger leisure vessels on 48V banks, remote cabins without a grid connection, generator-backed systems where PowerAssist cuts run time, and backup power installations for critical loads.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eEasySolar-II 48\/3000\/35-32 MPPT 250\/70 GX wall-mount unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis unit runs at 48V DC with high DC currents and connects to 230V AC mains. Installation should be carried out by a qualified electrician experienced with battery-based inverter systems.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053960065312,"sku":"PMP482307010","price":906.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pmp482307010-1.webp?v=1785424771"},{"product_id":"victron-24-5000-smart-inverter","title":"Victron Inverter 24\/5000 230V Smart | PIN242501000","description":"\u003cp\u003eThe Victron Inverter 24\/5000 230V Smart converts 24V DC battery power into 230V AC at up to 5000VA continuous output. It produces a pure sine wave, making it suitable for sensitive electronics, motor loads and demanding professional installations. Built-in Bluetooth and a VE.Direct port allow monitoring and configuration without extra hardware.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e - 5000VA continuous at 230V AC from a 24V DC battery bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e - pure sine wave, suitable for sensitive electronics and motor loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth\u003c\/strong\u003e - built-in VictronConnect Bluetooth for wireless monitoring and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Direct port\u003c\/strong\u003e - connects to Victron GX devices, MPPT controllers and system monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable relay\u003c\/strong\u003e - for generator start, alarm or load control functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC input range\u003c\/strong\u003e - wide input voltage range with configurable low battery shutdown and alarm thresholds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis model sits at the top of Victron's sine wave inverter range for 24V systems, handling loads such as power tools, pumps and air conditioning units. The 24V input suits larger battery banks where the higher current draw of a 12V system would create cable losses and heat. The Smart designation refers to the built-in Bluetooth module, which lets installers adjust battery type, low voltage cutoffs, alarm thresholds and AES mode directly from the VictronConnect app. For system-level integration, the VE.Direct port connects to devices such as the Cerbo GX for DVCC control and remote monitoring via VRM.\u003c\/p\u003e\u003cp\u003eIt is a standalone DC to AC inverter, not a grid-tied or hybrid unit, and it does not include a battery charger.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC input voltage\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous output power\u003c\/td\u003e\n\u003ctd\u003e5000VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC output voltage\u003c\/td\u003e\n\u003ctd\u003e230V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput waveform\u003c\/td\u003e\n\u003ctd\u003ePure sine wave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eBluetooth (VictronConnect), VE.Direct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e29.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e8719076058281\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid cabins, lodges and rural properties with 24V battery banks.\u003c\/li\u003e\n\u003cli\u003eMarine and narrowboat installations requiring high continuous AC output.\u003c\/li\u003e\n\u003cli\u003eMobile and vehicle-based power systems such as expedition vehicles and large motorhomes.\u003c\/li\u003e\n\u003cli\u003eBackup power for critical loads in commercial or agricultural premises.\u003c\/li\u003e\n\u003cli\u003eTelecoms and remote site power where grid connection is unavailable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eAt 5000VA this inverter draws high DC current from the battery bank, so correctly rated DC cabling, fusing and busbar connections are essential. Installation should be carried out by a qualified electrician familiar with battery-based power systems, with AC output wired to BS 7671. It is not grid-tied and does not require G98 or G99 notification, though any connection to fixed building wiring must comply with Part P of the Building Regulations in England and Wales.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter 24\/5000 230V Smart unit (PIN242501000)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053960098080,"sku":"PIN242501000","price":1190.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin242501000-1.webp?v=1785424779"},{"product_id":"multiplus-ii-5000va-gx-inverter-charger","title":"Victron MultiPlus-II 48\/5000\/70-50 GX Inverter Charger 230V | PMP482506000","description":"\u003cp\u003eThe Victron MultiPlus-II 48\/5000\/70-50 GX is a 5000VA inverter charger built for 48V battery systems running at 230V AC. It combines an inverter, a battery charger and an integrated GX device in one enclosure, so a separate Cerbo GX or Color Control is not needed for monitoring or configuration.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 5000VA \/ 4000W continuous at 230V AC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery charger\u003c\/strong\u003e, 70A charge current for 48V battery banks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC transfer switch\u003c\/strong\u003e, 50A, for connecting a grid or generator input alongside the inverter output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerAssist\u003c\/strong\u003e, draws on the battery to supplement a current-limited grid or generator supply during peak loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated GX device\u003c\/strong\u003e, connects to the VRM portal for remote monitoring, with VE.Bus for communication with other Victron equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESS support\u003c\/strong\u003e, configurable for self-consumption, time-of-use optimisation or grid-tied battery backup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid installations with 48V battery banks, grid-tied ESS setups, and generator-backed systems where PowerAssist extends what a small generator can supply. It also fits marine and vehicle installs needing 230V AC from a 48V DC supply. The unit is single phase but can be paralleled or arranged into a three-phase system for larger commercial installations.\u003c\/p\u003e\u003ch3\u003eBattery compatibility\u003c\/h3\u003e\u003cp\u003eConfigurable charge algorithms support a range of 48V battery chemistries, including lithium (LiFePO4) and lead-acid types.\u003c\/p\u003e\u003ch2\u003eSpecifications summary\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWeight: 28.3 kg\u003c\/li\u003e\n\u003cli\u003eGTIN: 8719076048824\u003c\/li\u003e\n\u003cli\u003eSKU: PMP482506000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053960622368,"sku":"PMP482506000","price":751.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pmp482506000-1.webp?v=1785424884"},{"product_id":"three-phase-hybrid-inverter-15kw-48v","title":"Hybrid 15kW Three-Phase Solar Inverter 48V | Voltasol","description":"\u003cp\u003eThe Voltasol 15kW is a three-phase hybrid solar inverter built for on-grid and off-grid use with battery energy storage. It runs on a 48V DC battery input, uses dual MPPT with up to 22.5kW of PV input, and works with Pylontech lithium and lead-acid batteries. A three-phase energy meter, Wi-Fi card, and Modbus card are supplied as standard, and the unit can be expanded to 90kW when units are paralleled.\u003c\/p\u003e\u003ch2\u003eKey features of this three phase hybrid solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 15kW three-phase, with grid-tie, off-grid, and grid-tie with backup modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input\u003c\/strong\u003e, dual MPPT, up to 22.5kW across 4 inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC, compatible with Pylontech US2000C, US3000C, US5000C and lead-acid batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging current\u003c\/strong\u003e, user adjustable up to 300A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units for 90kW total output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications\u003c\/strong\u003e, USB, RS-232, Modbus, SNMP, plus included Wi-Fi card and three-phase energy meter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis inverter suits commercial and large residential installations that need a high-output hybrid system with battery backup. Solar generation, battery storage, and grid connection sit in one unit, which helps maximise self-consumption and gives backup power during grid outages.\u003c\/p\u003e\u003cp\u003eThe 22.5kW maximum PV input allows the solar array to be sized larger than the inverter's rated output, useful during lower irradiance periods. A 300A maximum charging current supports fast charging of a large Pylontech or lead-acid battery bank from either solar or grid.\u003c\/p\u003e\u003cp\u003eUp to 6 units can run in parallel to build three-phase systems as large as 90kW, without stepping up to a single larger inverter. The communication boards needed for parallel operation come included.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge residential and commercial three-phase hybrid solar PV and battery storage systems\u003c\/li\u003e\n\u003cli\u003eOn-grid installations that need battery backup during power outages\u003c\/li\u003e\n\u003cli\u003eOff-grid commercial and agricultural sites requiring three-phase power\u003c\/li\u003e\n\u003cli\u003eInstallations where expansion beyond 15kW is planned\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is a three-phase hybrid inverter and must be installed by a qualified electrician or MCS-accredited solar installer. Battery storage systems should follow BS EN 62619 and local building regulations, and three-phase grid connection requires a G99 application with DNO approval. Correct cable sizing, fusing, isolators, surge protection, and earthing all need to be in place. This is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053960687904,"sku":"9990210","price":3417.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-9990210-1.webp?v=1785424899"},{"product_id":"solar-inverter-charger-11kw-48v","title":"Conversol 11kW Off-Grid Solar Inverter Charger 48V | Voltacon","description":"\u003cp\u003eThe Conversol Max 11kW is a single-phase off-grid solar inverter charger delivering 11kW continuous pure sine wave AC output and 11kW PV input via dual independent MPPT. It runs on a 48V DC battery bank and works with lead-acid, GEL, lithium-ion and LiFePO4 batteries, with BMS communication ports already fitted for lithium setups.\u003c\/p\u003e\u003ch2\u003e11kW solar inverter charger features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC output\u003c\/strong\u003e, 11kW continuous pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input\u003c\/strong\u003e, 11kW via dual independent MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery voltage\u003c\/strong\u003e, 48V DC, compatible with lead-acid (AGM, GEL, flooded, forklift), lithium-ion and LiFePO4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-independent operation\u003c\/strong\u003e, runs loads direct from solar with 8 to 10 panels in series minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, built-in Wi-Fi for Android and iOS, plus RGB status indicator and USB On-the-Go\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units, giving 66kW single-phase or three-phase configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to large off-grid residential properties, farms, workshops and light commercial or industrial sites where continuous AC demand reaches or exceeds 11kW. It handles agricultural loads such as water pumps, air compressors and refrigeration, and can support off-grid EV charging, heat pumps and air conditioning at 230V.\u003c\/p\u003e\u003ch3\u003eParallel and redundancy\u003c\/h3\u003e\u003cp\u003eParallel hardware and communication ports come pre-installed, so units can be linked to scale output without extra interface hardware. If one unit in a parallel array fails, the rest keep supplying power, so the system has built-in redundancy.\u003c\/p\u003e\u003ch3\u003eBattery-independent mode\u003c\/h3\u003e\u003cp\u003eThe inverter can feed AC loads directly from the solar array without a battery connected, as long as the PV string voltage is high enough. Voltacon recommends a minimum of 8 to 10 panels wired in series for this mode.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is an 11kW system and must be installed by a qualified electrician or solar installer, with correct cable sizing, busbar ratings, fusing, DC and AC isolators, surge protection and earthing. Battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053960720672,"sku":"002136","price":1260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002136-1.webp?v=1785424930"},{"product_id":"conversol-max-ii-8kw-inverter-charger","title":"8kW Off Grid Inverter Charger 150A MPPT | Conversol Max-II","description":"\u003cp\u003eThe Conversol Max-II 8kW is an off grid inverter charger with dual MPPT solar input and time-controlled charging. It delivers 8kW continuous output with 16kVA surge capacity, pairing a pure sine wave inverter with a solar and AC charger in one unit for off-grid and backup power systems.\u003c\/p\u003e\u003ch2\u003eKey features of this 8kW off grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 8kW continuous, 16kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, 150A combined MPPT current across dual MPPT inputs, up to 8kW total PV capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime-controlled charging\u003c\/strong\u003e, schedule AC charging from grid or generator during off-peak hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V, compatible with lithium and lead-acid batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, USB, RS232, RS485, Wi-Fi and dry contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Max-II builds on the Conversol off-grid platform with programmable time-charging added. The dual MPPT charger operates between 90V and 450VDC, with an open circuit limit of 500VDC, covering a wide range of PV string arrangements.\u003c\/p\u003e\u003cp\u003eThe 150A MPPT charging current suits large battery banks where fast solar charging matters. Paralleling up to 6 units lets the platform scale to larger off-grid requirements.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, commercial and industrial energy storage, backup power systems with grid or generator input, agricultural and rural off-grid installations, and systems needing programmable charge scheduling.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol Max-II 8kW off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eCommunication cable and accessories\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or accredited solar installer. Correct DC cable sizing, fusing and battery isolators are mandatory at 48V high-current levels. Time-charging functions must be configured correctly to avoid unintended battery overcharge. Read the installation manual in full before commissioning.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053960917280,"sku":"002134","price":1092.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002134-1.webp?v=1785425015"},{"product_id":"three-phase-11kw-on-grid-inverter","title":"11kW Three-Phase On-Grid Solar Inverter IP65 | Elios","description":"\u003cp\u003eThe Elios 11kW is a three-phase on-grid solar inverter built for commercial and industrial PV systems on a 400VAC supply. It converts solar DC power for self-consumption or grid export, with built-in export limitation via three-phase CT current sensors and Wi-Fi monitoring for remote diagnostics.\u003c\/p\u003e\u003ch2\u003eThree-phase grid tie inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 11kW rated power at three-phase 400VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak efficiency\u003c\/strong\u003e, 98.3% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC input range\u003c\/strong\u003e, 160V to 1000V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController\u003c\/strong\u003e, DSP for grid management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, integrated Wi-Fi, plus USB and RS485 communications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExport control\u003c\/strong\u003e, three-phase CT current transformer sensors, with a zero-export mode for full self-consumption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, IP65 rated for outdoor mounting, with an integrated DC solar isolator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLED indicators in green, amber and red show operating status at a glance, and DC connections use standard MC4 connectors.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial and industrial three-phase grid-connected solar PV installations, particularly where the DNO requires export limitation or zero export. The three-phase CT sensor fits in the consumer unit and measures consumption across all three phases, so the inverter can throttle output to stay within the agreed limit. It also meets UK and European anti-islanding requirements, shutting down automatically if the grid supply is interrupted. The unit is G100 compliant.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited solar installer. Three-phase grid-connected inverters in the UK require a G99 application and DNO approval before connection. DC isolators, AC protection, surge protection and earthing must comply with BS 7671, and CT sensors must be fitted in the consumer unit by a qualified electrician. This is not a DIY installation.\u003c\/p\u003e","brand":"Elios","offers":[{"title":"Default Title","offer_id":52053960950048,"sku":"PH50-11000TM","price":1422.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ph50-11000tm-1.webp?v=1785425025"},{"product_id":"off-grid-solar-inverter-5kw-48v","title":"5kW Off Grid Solar Inverter Charger 48V 100A MPPT | Conversol V7","description":"\u003cp\u003eThe Conversol V7 is a 5kW off-grid solar inverter and battery charger built around a 100A MPPT controller with a 120-450V DC PV input range. It switches between grid, solar, and battery supply with zero (0ms) transfer time, so equipment that cannot tolerate a break in power keeps running. Built-in Wi-Fi gives remote monitoring through a mobile app, and the unit accepts lithium-ion batteries via RS485 or CAN-BUS BMS communication.\u003c\/p\u003e\u003ch2\u003eKey features of this off grid solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 5kW (5000W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, 100A MPPT with 120-450V DC PV input range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero transfer time\u003c\/strong\u003e, 0ms switching, suited to servers, NAS devices and ATMs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar array capacity\u003c\/strong\u003e, up to 6,000W across two symmetrical arrays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC, compatible with lithium-ion, LiFePO4, GEL and AGM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 9 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis is an upgrade on the earlier V5 Super, carrying a higher-amperage MPPT charger and zero millisecond transfer switching. The wider 120-450V DC input range allows longer PV strings, which cuts down on the number of parallel strings and simplifies cabling on larger arrays. The LCD control module is removable and can be wall-mounted away from the inverter itself, while the Wi-Fi app handles monitoring from anywhere with an internet connection. AC or solar input priority is configurable from the LCD.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuits off-grid homes, farms and workshops, and any installation where critical loads such as servers or security systems cannot tolerate an interruption in supply. The high PV input voltage range and parallel capability also make it suitable for larger or scalable off-grid systems.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or solar installer. PV string voltage must not exceed 450V DC under any expected temperature condition, and open-circuit voltage should be checked at minimum expected temperature before commissioning. Battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961081120,"sku":"90914124","price":509.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914124-1.webp?v=1785425089"},{"product_id":"hybrid-inverter-5500w-pylontech-48v","title":"Voltasol ESS 5.5kW Hybrid Inverter Charger 48V | Pylontech Compatible","description":"\u003cp\u003eThe Voltasol ESS 5500W is a single-phase hybrid inverter and battery charger built for energy storage systems running Pylontech lithium batteries. It delivers 5.5kW continuous output with a 100A solar and AC charger, and its BMS communication is compatible with Pylontech US3000C, US5000C and legacy US2000C modules. An energy meter and Modbus card come pre-installed.\u003c\/p\u003e\u003ch2\u003eKey features of this 48V hybrid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 5500W single-phase, higher than the 3600W limit found on many comparable hybrid inverters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, Pylontech US3000C, US5000C, legacy US2000C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharger\u003c\/strong\u003e, 100A AC and solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput waveform\u003c\/strong\u003e, pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExport control\u003c\/strong\u003e, adjustable from 0W to 5500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications\u003c\/strong\u003e, USB, RS232, Modbus, SNMP, GPRS, Wi-Fi\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperating modes\u003c\/h2\u003e\u003cp\u003eThe inverter can run off-grid with the grid as a backup source, or in hybrid mode where the inverter and grid supply AC loads together. Export to grid is adjustable across the full 0W to 5500W range, and a split-supply mode lets AC loads run from the grid while critical loads run off-grid, within the combined 5.5kW capacity. A timer charging function schedules AC charging from the grid during low-tariff periods.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential energy storage systems built around Pylontech lithium batteries, including self-consumption setups with higher continuous load demands, on-grid installations with battery backup and export control, and off-grid residential or agricultural single-phase systems.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited solar installer. Battery systems must comply with BS EN 62619 and local building regulations, with correct cable sizing, fusing, isolators and earthing in place. Grid connection requires G98 notification or a G99 application. This is not a DIY installation product.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnergy meter and Modbus card, pre-installed\u003c\/li\u003e\n\u003cli\u003eBMS communication cards\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961113888,"sku":"002257","price":943.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002257-1.webp?v=1785425105"},{"product_id":"grid-tie-inverter-15kw-three-phase","title":"Elios 15kW Three-Phase Grid Tie Solar Inverter G98\/G99 | Fanless","description":"\u003cp\u003eThe Elios 15kW is a three-phase grid tied solar inverter with three independent MPPT controllers, Wi-Fi monitoring and fanless cooling. It is G98\/G99 compliant for UK grid connection and suited to commercial and industrial solar PV installations. IP65 rated, with a maximum PV input of 18kW.\u003c\/p\u003e\u003ch2\u003eKey features of this grid tied solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 15kW three-phase on-grid output at 320 to 478VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT design\u003c\/strong\u003e, three independent MPPT controllers, 200V to 1000V DC range per MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString capacity\u003c\/strong\u003e, up to 20 panels in series per PV string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax PV input\u003c\/strong\u003e, 18000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak efficiency\u003c\/strong\u003e, 98.3% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, fanless natural convection through a large aluminium heatsink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating\u003c\/strong\u003e, IP65 for outdoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe inverter converts solar DC power into three-phase 320 to 478VAC output for self-consumption or export. Three independent MPPT controllers let it manage three separate string inputs, useful on commercial roofs with multiple orientations or partial shading across different sections.\u003c\/p\u003e\u003cp\u003eFanless cooling removes moving parts entirely. Natural convection through the aluminium heatsink keeps operating temperatures in check without noise or maintenance, which suits noise-sensitive commercial sites.\u003c\/p\u003e\u003cp\u003eExport limitation via CT clamp adjusts output in real time to match consumption, giving zero-export or a fixed export level as required by the DNO. Monitoring runs through the Wi-Fi app or a Solar Assistant Orange Pi controller for more detailed local and remote monitoring.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCommercial and industrial three-phase grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003eMulti-orientation rooftop arrays benefiting from three independent MPPTs\u003c\/li\u003e\n\u003cli\u003eInstallations requiring export limitation, zero-export mode or net metering\u003c\/li\u003e\n\u003cli\u003eNoise-sensitive sites where fanless operation is needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eFitting must be carried out by a qualified electrician or MCS-accredited solar installer. Three-phase grid-connected inverters in the UK need a G99 application and DNO approval before connection. DC isolators, AC protection, surge protection and earthing must comply with BS 7671. CT sensors must be fitted by a qualified electrician; this is not a DIY installation.\u003c\/p\u003e","brand":"Elios","offers":[{"title":"Default Title","offer_id":52053961146656,"sku":"PH50TM-15000","price":1537.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ph50tm-15000-1.webp?v=1785425122"},{"product_id":"three-phase-hybrid-inverter-15kw-ip65","title":"Infini Solar 15kW Three-Phase Hybrid Inverter IP65 48V | Voltacon","description":"\u003cp\u003eThe Infini Solar WP 15kW is a three-phase hybrid solar inverter built for outdoor installation in demanding conditions. It carries an IP65 rating and operates from -25°C to +60°C, with 150% unbalanced load support and parallel operation for up to 6 units.\u003c\/p\u003e\u003ch2\u003eKey features of this three-phase hybrid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 15kW three-phase, supporting on-grid, off-grid and grid-tie with backup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP65 waterproof and dustproof housing for direct outdoor mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating range\u003c\/strong\u003e, -25°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnbalanced load support\u003c\/strong\u003e, 150% across three phases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC with MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunications\u003c\/strong\u003e, built-in Wi-Fi, RS485 BMS, Modbus card and energy meter included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe WP designation marks this as the outdoor-rated variant of the Infini Solar three-phase hybrid range. The IP65 housing means it can go straight onto an exterior wall, into a dusty industrial building, or an agricultural plant room with no climate control, without a separate weatherproof enclosure.\u003c\/p\u003e\u003cp\u003eIts -25°C to +60°C range covers the UK climate and extends into cold storage and industrial settings. The 150% unbalanced load support helps where three-phase loads aren't evenly split, common in commercial and agricultural buildings. One of the two output ports can be configured as a generator input, so the unit can switch automatically between solar, battery, grid and generator sources.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis is a three-phase system and must be designed and fitted by a qualified electrician or solar installer. A G99 application and DNO approval are needed for grid connection. Even with IP65 protection, avoid direct sunlight without shading, as high ambient temperature reduces output. Battery and generator wiring must be carried out by a qualified electrician.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIndustrial and agricultural sites needing an outdoor-rated hybrid inverter\u003c\/li\u003e\n\u003cli\u003eCommercial buildings with dusty or uncontrolled indoor environments\u003c\/li\u003e\n\u003cli\u003eThree-phase systems with unbalanced load requirements\u003c\/li\u003e\n\u003cli\u003eInstallations combining solar, battery, grid and generator backup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961441568,"sku":"002137","price":3622.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002137-1.webp?v=1785425224"},{"product_id":"solar-pump-inverter-7-5kw-mppt","title":"Aspire 7.5kW Solar Water Pump Inverter MPPT 250-780V | 3 Phase","description":"\u003cp\u003eThe Aspire 7.5kW is a solar pump inverter built for three-phase asynchronous induction motors up to 10HP. It runs straight from a PV array with no battery needed, using an integrated MPPT covering a 250-780V DC input range and a maximum PV input of 9,500W. RS485 monitoring, a display screen, and a full protection suite are built in.\u003c\/p\u003e\u003ch2\u003eKey features of this solar pump inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-free operation\u003c\/strong\u003e, draws power directly from solar panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT input range\u003c\/strong\u003e, 250V to 780V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax PV input power\u003c\/strong\u003e, 9,500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor compatibility\u003c\/strong\u003e, three-phase asynchronous induction motors up to 10HP (7.5kW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop\u003c\/strong\u003e, responds to solar irradiation levels without manual input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start\u003c\/strong\u003e, reduces water hammer and inrush current at start-up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eA DSP-based closed-loop control drives the motor smoothly as irradiance changes through the day. The MPPT tracks the array's maximum power point continuously, so pump output adjusts with available sunlight rather than dropping out. Soft start limits mechanical shock on the pipework and motor at start-up, and the unit runs its own self-diagnostics alongside LED status indicators and an onboard display.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to agricultural irrigation, livestock watering, borehole and groundwater extraction, and rural water supply or sanitation projects. It fits any three-phase pump application where mains power is unavailable or not practical to install.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis is a pump inverter for three-phase motors, not a battery or home energy storage inverter. The PV string voltage must stay within the 250-780V MPPT window under all operating conditions, and installation should be carried out by a qualified professional. Do not connect it to a battery bank.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961474336,"sku":"90914169","price":409.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914169-1.webp?v=1785425242"},{"product_id":"solar-inverter-1kw-solis","title":"Solis 1kW Single-Phase Grid Tie Solar Inverter IP65 | S5-GR1P1K-M-EU-M08-4-CT","description":"\u003cp\u003eThe Solis S5-GR1P1K is a compact 1kW single-phase grid tied solar inverter built for small PV installations. A 60V start-up voltage lets it begin generating in low light, and its dynamic MPPT tracker holds efficiency above 99% across a range of panel types. The IP65 rating suits outdoor mounting.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 1kW, suitable for arrays up to 1200Wp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart-up voltage\u003c\/strong\u003e, 60V, so generation begins early morning and late afternoon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT efficiency\u003c\/strong\u003e, dynamic tracking above 99%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax DC input voltage\u003c\/strong\u003e, 600V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel compatibility\u003c\/strong\u003e, 36, 54 and 72-cell configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, IP65 enclosure, QNS anti-islanding included as standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe wide 0 to 8A current input range makes the inverter compatible with a broad set of modern panel designs, while the dynamic MPPT continues tracking the maximum power point regardless of cell count or configuration. QNS anti-islanding protection disconnects the unit from the grid automatically if supply is interrupted, meeting grid connection requirements. DRM (Demand Response Mode) is built in. The inverter carries a 5-year standard warranty and a design life stated at over 20 years.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall residential grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003eInstallations with a small number of panels feeding the grid\u003c\/li\u003e\n\u003cli\u003eRetrofit additions to existing arrays needing a dedicated small-array inverter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or MCS-accredited solar installer. UK grid-connected inverters require G98 notification or G99 application to the DNO before connection, and all DC isolators, AC protection and earthing must comply with BS 7671 and the relevant MCS standards. This is not a DIY connection to the grid.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053961605408,"sku":"S5-GR1P1K-M-EU-M08-4-CT","price":304.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s5-gr1p1k-m-eu-m08-4-ct-1.webp?v=1785425291"},{"product_id":"off-grid-solar-inverter-charger-48v-5-6kw","title":"5.6kW Off Grid Solar Inverter Charger 48V 120A MPPT | Conversol VM4","description":"\u003cp\u003eThe Conversol VM4 is a 5.6kW pure sine wave off grid solar inverter charger for 48V DC battery banks. It pairs a 120A MPPT solar charger, rated for up to 6kW of PV input, with Wi-Fi and Bluetooth monitoring, a 4.3-inch colour touchscreen and BMS communication for Pylontech, Leoch, Fogstar and other compatible lithium batteries.\u003c\/p\u003e\u003ch2\u003eKey features of this off grid solar inverter charger\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 5.6kW continuous pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC, compatible with Pylontech US5000, US3000C, US2000C, Leoch, Fogstar and lead-acid (lithium-ion, LiFePO4, GEL, AGM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, 120A MPPT with 6kW PV input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery independent\u003c\/strong\u003e, can run AC loads directly from solar without a battery bank connected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, built-in Wi-Fi (Android and iOS) and Bluetooth, 4.3-inch colour touchscreen, RGB status ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, RS485, CAN-BUS and RS232 BMS ports\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign details\u003c\/h2\u003e\u003cp\u003eThe VM4 is the fourth generation of the Voltacon off-grid inverter platform, adding a colour touchscreen, Bluetooth and USB On-the-Go support over earlier models. Because it can operate without a connected battery bank, it can supply daytime AC loads from the solar array before a storage system is fully installed. The 120A MPPT charger can also be scheduled to top up batteries from grid or generator power during off-peak tariff periods.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, cabins and workshops, agricultural and rural sites running on Pylontech or lead-acid batteries, and backup power systems combining solar and battery storage. It also fits installations that need solar operation from day one, ahead of battery storage being fitted.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eThis inverter must be installed by a qualified electrician or solar installer. Battery systems need to comply with BS EN 62619 and local building regulations, with correct cable sizing, fusing, isolators and earthing. It is not suitable for DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961736480,"sku":"90914136","price":577.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914136-1.webp?v=1785425315"},{"product_id":"24v-off-grid-inverter-1500w-mppt","title":"1500W Off-Grid Solar Inverter 24V MPPT | Conversol","description":"\u003cp\u003eThe Conversol 1.5kVA is a compact off grid solar inverter with a built-in MPPT charger, built for small autonomous systems running from a 24V battery bank. It outputs 230V pure sine wave power and accepts up to 2000W of solar input, with Bluetooth connectivity for remote monitoring.\u003c\/p\u003e\u003ch2\u003eOff grid solar inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower output\u003c\/strong\u003e, 1500VA\/1500W continuous, 3000VA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 24V with integrated MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 2000W, MPPT range 120VDC to 380VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum PV open circuit voltage\u003c\/strong\u003e, 400VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charge current\u003c\/strong\u003e, 60A maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave 230V output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMonitoring and communication\u003c\/h2\u003e\u003cp\u003eThe unit includes Bluetooth monitoring alongside USB, RS232 and RS485 communication, so it can be checked and configured without needing physical access. The MPPT charger's wide 120V to 380VDC range allows it to work with a range of panel configurations and string lengths.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to small off-grid cabins, holiday homes and lodges, boats and marine power systems, motorhomes and campervans, remote monitoring stations, and backup power for smaller loads. At 8.5kg and 100 x 280 x 390mm it is compact enough for installations where space and weight matter.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol 1.5kVA off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or solar installer. Cable sizing and fusing must suit 24V battery operation, the maximum PV open circuit voltage of 400VDC must not be exceeded, and battery charge settings should match the battery chemistry fitted.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961769248,"sku":"90914166","price":313.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914166-1.webp?v=1785425333"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/solar-power-inverters.oembed?page=4","provider":"LED \u0026 Solar","version":"1.0","type":"link"}