{"title":"Grid-Tie Inverters","description":"\u003cp\u003eGrid-tie inverters convert the DC output from solar panels into AC power synchronised with the mains, allowing a system to feed excess generation back to the grid. This range covers single-phase and three-phase units from single kW outputs up to 15kW, suited to domestic and small commercial installations.\u003c\/p\u003e\u003cp\u003eModels include single and dual MPPT tracker configurations, with options for export limitation and net metering compliance to G98 and G99 standards. Wi-Fi monitoring is built into several units, giving installers and homeowners visibility of system performance without extra hardware.\u003c\/p\u003e\u003cp\u003eInstallers choose based on phase count, power rating and the number of MPPT trackers needed to match the array design, while homeowners benefit from remote monitoring and straightforward setup.\u003c\/p\u003e","products":[{"product_id":"sma-tripower-x-20kw-inverter","title":"3-Phase Grid-Tie Solar Inverter 20kW IP65 | SMA Sunny Tripower X","description":"\u003cp\u003eThe SMA Sunny Tripower X 20kW is a three phase grid tie inverter built for commercial PV systems and large residential installations. It runs three independent MPP trackers, accepts up to 1000VDC on the input side, and sits in an IP65 enclosure suitable for outdoor mounting. An integrated system manager adds monitoring and control across multiple inverters without extra hardware.\u003c\/p\u003e\u003ch2\u003eGrid tie inverter key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 20kW AC at 230V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPP trackers\u003c\/strong\u003e, three independent trackers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, up to 1000VDC maximum, 345 to 800V MPP range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent per tracker\u003c\/strong\u003e, 24A maximum usable input current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 98.2% maximum, 97.9% European efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 rated for outdoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt-in system functions\u003c\/h2\u003e\u003cp\u003eSMA ShadeFix improves yield during partial shading by optimising at the inverter level, without module-level optimisers. SMA ArcFix provides active DC arc-fault detection. The integrated system manager can monitor and control up to five SMA inverters plus one energy meter, handling dynamic power control and feed-in management for systems up to 135kVA. Communication runs over Ethernet, local WLAN, or RS485, using SMA Modbus and SunSpec Modbus protocols, with direct access to Sunny Portal via ennexOS for remote monitoring.\u003c\/p\u003e\u003ch2\u003eProduct family\u003c\/h2\u003e\u003cp\u003eThis 20kW model shares its platform and footprint with the 12kW, 15kW, and 25kW variants in the Sunny Tripower X range. The three MPP trackers give independent string management, which helps on roofs with mixed orientations or shading.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial rooftop and ground-mounted PV, large residential solar arrays, multi-inverter sites needing centralised monitoring, and installations with partial shading or several roof aspects.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrical engineer or MCS-accredited solar installer. Connection at this power level requires G99 notification and DNO approval in the UK. DC wiring, string fusing, AC protection and earthing must follow IET Wiring Regulations and SMA's installation manual, with commissioning completed via SMA's commissioning tools before the system is switched on.\u003c\/p\u003e","brand":"SMA","offers":[{"title":"Default Title","offer_id":52049599332640,"sku":"STP20-50","price":3142.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-stp20-50-1.webp?v=1785330321"},{"product_id":"solis-mini-700-4g-inverter","title":"Solis Mini 700-4G 0.7kW Single Phase Grid Tie Inverter IP65 | Solis","description":"\u003cp\u003eThe Solis Mini 700-4G is a compact 0.7kW single-phase grid-tie solar inverter built for small PV installations. It converts DC power from the array into 230V\/50Hz AC for use in the property or export to the grid, starting up at just 60V so it begins generating at first light and continues in low irradiance conditions. It carries an IP65 rating for outdoor installation.\u003c\/p\u003e\u003ch2\u003eKey features of the Solis Mini 700-4G\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 0.7kW for small grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart-up voltage\u003c\/strong\u003e, ultra-low 60V, generating power from early morning and in low light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT efficiency\u003c\/strong\u003e, dynamic tracker delivering above 99% under all conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArray compatibility\u003c\/strong\u003e, systems up to 900Wp, panels with 36, 54 or 72 cells\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput current range\u003c\/strong\u003e, 0 to 8A, suited to modern high-power panel designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, QNS anti-islanding as standard, DRM integrated, IP65 rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe dynamic MPPT tracker continuously identifies the maximum power point of the connected array, achieving above 99% MPP output regardless of panel make, cell count or configuration. The wide 0 to 8A current input range makes it compatible with modern higher-efficiency panel designs. QNS anti-islanding protection is fitted as standard, disconnecting the inverter automatically from the grid during a power failure. The unit comes with a 5-year standard warranty.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall residential grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003eInstallations with a small number of panels for self-consumption or grid export\u003c\/li\u003e\n\u003cli\u003eRetrofit additions to existing systems that need a dedicated small-string inverter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThis inverter must be installed by a qualified electrician or MCS-accredited solar installer. In the UK, G98 notification to the DNO is required before grid connection, and all DC isolators, AC protection and earthing must comply with BS 7671 and the applicable MCS installation standard. Do not attempt DIY connection of grid-tied equipment.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053950136608,"sku":"999006","price":407.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999006-1.webp?v=1785424217"},{"product_id":"solis-dual-mppt-3-6kw-inverter","title":"Solis 3.6kW Dual MPPT Single Phase Grid Tie Inverter | S6-GR1P3.6K-DC","description":"\u003cp\u003eThe Solis S6-GR1P3.6K-DC is a 3.6kW single-phase grid-tie inverter built for residential solar PV systems. It uses a dual MPPT design, has an integrated DC switch and export power manager, and carries an IP66 rating for outdoor mounting.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 3600W (3.6kW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT inputs\u003c\/strong\u003e, 2 independent trackers, useful for roofs with different orientations or partial shading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax input current\u003c\/strong\u003e, 14A per string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAFCI protection\u003c\/strong\u003e, integrated arc-fault detection shuts down the affected string before a fault develops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExport Power Manager (EPM)\u003c\/strong\u003e, integrated, for DNO export limitation under G98\/G99\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress protection\u003c\/strong\u003e, IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax efficiency\u003c\/strong\u003e, 97.3%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 11.2kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eGinlong Solis has manufactured solar inverters since 2005 and is one of the larger inverter producers worldwide. The S6 series is its current residential platform, aimed at UK and European grid-connected installations. The dual MPPT strings are managed independently, so shaded or differently-angled arrays can still be handled by one unit. The AFCI function watches the DC circuit continuously and isolates a string if it detects an arc fault. The EPM lets an installer curtail export to a set level where a DNO connection agreement requires it.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential single-phase grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003eRoofs with two orientations or partial shading needing independent MPPT strings\u003c\/li\u003e\n\u003cli\u003eInstallations where AFCI protection and export limitation are required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited installer. G98 notification or G99 application to the DNO is required before connecting to the grid in the UK. DC isolators, AC protection, surge protection and earthing must meet BS 7671 and the relevant MCS installation standard. This is not a DIY-connection product.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053950333216,"sku":"S6-GR1P3.6K-DC","price":418.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p3-6k-dc-1.webp?v=1785424307"},{"product_id":"elios-5kw-grid-tie-inverter","title":"5kW Solar Grid Tie Inverter MPPT Wi-Fi IP65 | Elios","description":"\u003cp\u003eThe Elios 5000W solar grid tie inverter turns DC power from a solar array into 230V\/50Hz AC for use in the property or export to the grid. It uses high-efficiency MPPT tracking, gives a pure sine wave output, and carries an IP65 rating for outdoor mounting. A fanless design keeps operation quiet, and built-in anti-islanding protection disconnects the unit automatically if the grid fails.\u003c\/p\u003e\u003ch2\u003eKey features of this solar grid tie inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 5kW (5000W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT efficiency\u003c\/strong\u003e, up to 99.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput waveform\u003c\/strong\u003e, pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP65 rated for outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, fanless, natural convection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Wi-Fi and USB communications, viewable via mobile app\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eExport control and grid safety\u003c\/h2\u003e\u003cp\u003eAnti-islanding protection shuts the inverter down automatically on grid failure, stopping backfeed to the network. Where a DNO requires export limitation, the included current sensor clamp measures household consumption in real time and modulates output between 0W and 5kW, with the option to set export to zero. AC input priority is configurable via the LCD.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential and small commercial on-grid solar PV systems, including installations where export limiting is required by the DNO, and outdoor locations where the IP65 rating matters.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis is grid-connected equipment and must be installed by a qualified electrician or solar installer. UK installations must meet G98 or G99 notification requirements, with DC isolators, AC protection and earthing carried out to BS 7671 and MCS standards. Not for DIY installation.\u003c\/p\u003e","brand":"Elios","offers":[{"title":"Default Title","offer_id":52053955772704,"sku":"9005111","price":472.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-9005111-1.webp?v=1785424616"},{"product_id":"three-phase-11kw-on-grid-inverter","title":"11kW Three-Phase On-Grid Solar Inverter IP65 | Elios","description":"\u003cp\u003eThe Elios 11kW is a three-phase on-grid solar inverter built for commercial and industrial PV systems on a 400VAC supply. It converts solar DC power for self-consumption or grid export, with built-in export limitation via three-phase CT current sensors and Wi-Fi monitoring for remote diagnostics.\u003c\/p\u003e\u003ch2\u003eThree-phase grid tie inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 11kW rated power at three-phase 400VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak efficiency\u003c\/strong\u003e, 98.3% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC input range\u003c\/strong\u003e, 160V to 1000V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController\u003c\/strong\u003e, DSP for grid management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, integrated Wi-Fi, plus USB and RS485 communications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExport control\u003c\/strong\u003e, three-phase CT current transformer sensors, with a zero-export mode for full self-consumption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, IP65 rated for outdoor mounting, with an integrated DC solar isolator\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLED indicators in green, amber and red show operating status at a glance, and DC connections use standard MC4 connectors.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial and industrial three-phase grid-connected solar PV installations, particularly where the DNO requires export limitation or zero export. The three-phase CT sensor fits in the consumer unit and measures consumption across all three phases, so the inverter can throttle output to stay within the agreed limit. It also meets UK and European anti-islanding requirements, shutting down automatically if the grid supply is interrupted. The unit is G100 compliant.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited solar installer. Three-phase grid-connected inverters in the UK require a G99 application and DNO approval before connection. DC isolators, AC protection, surge protection and earthing must comply with BS 7671, and CT sensors must be fitted in the consumer unit by a qualified electrician. This is not a DIY installation.\u003c\/p\u003e","brand":"Elios","offers":[{"title":"Default Title","offer_id":52053960950048,"sku":"PH50-11000TM","price":1422.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ph50-11000tm-1.webp?v=1785425025"},{"product_id":"grid-tie-inverter-15kw-three-phase","title":"Elios 15kW Three-Phase Grid Tie Solar Inverter G98\/G99 | Fanless","description":"\u003cp\u003eThe Elios 15kW is a three-phase grid tied solar inverter with three independent MPPT controllers, Wi-Fi monitoring and fanless cooling. It is G98\/G99 compliant for UK grid connection and suited to commercial and industrial solar PV installations. IP65 rated, with a maximum PV input of 18kW.\u003c\/p\u003e\u003ch2\u003eKey features of this grid tied solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 15kW three-phase on-grid output at 320 to 478VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT design\u003c\/strong\u003e, three independent MPPT controllers, 200V to 1000V DC range per MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString capacity\u003c\/strong\u003e, up to 20 panels in series per PV string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax PV input\u003c\/strong\u003e, 18000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak efficiency\u003c\/strong\u003e, 98.3% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, fanless natural convection through a large aluminium heatsink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating\u003c\/strong\u003e, IP65 for outdoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe inverter converts solar DC power into three-phase 320 to 478VAC output for self-consumption or export. Three independent MPPT controllers let it manage three separate string inputs, useful on commercial roofs with multiple orientations or partial shading across different sections.\u003c\/p\u003e\u003cp\u003eFanless cooling removes moving parts entirely. Natural convection through the aluminium heatsink keeps operating temperatures in check without noise or maintenance, which suits noise-sensitive commercial sites.\u003c\/p\u003e\u003cp\u003eExport limitation via CT clamp adjusts output in real time to match consumption, giving zero-export or a fixed export level as required by the DNO. Monitoring runs through the Wi-Fi app or a Solar Assistant Orange Pi controller for more detailed local and remote monitoring.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCommercial and industrial three-phase grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003eMulti-orientation rooftop arrays benefiting from three independent MPPTs\u003c\/li\u003e\n\u003cli\u003eInstallations requiring export limitation, zero-export mode or net metering\u003c\/li\u003e\n\u003cli\u003eNoise-sensitive sites where fanless operation is needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eFitting must be carried out by a qualified electrician or MCS-accredited solar installer. Three-phase grid-connected inverters in the UK need a G99 application and DNO approval before connection. DC isolators, AC protection, surge protection and earthing must comply with BS 7671. CT sensors must be fitted by a qualified electrician; this is not a DIY installation.\u003c\/p\u003e","brand":"Elios","offers":[{"title":"Default Title","offer_id":52053961146656,"sku":"PH50TM-15000","price":1537.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ph50tm-15000-1.webp?v=1785425122"},{"product_id":"solar-inverter-1kw-solis","title":"Solis 1kW Single-Phase Grid Tie Solar Inverter IP65 | S5-GR1P1K-M-EU-M08-4-CT","description":"\u003cp\u003eThe Solis S5-GR1P1K is a compact 1kW single-phase grid tied solar inverter built for small PV installations. A 60V start-up voltage lets it begin generating in low light, and its dynamic MPPT tracker holds efficiency above 99% across a range of panel types. The IP65 rating suits outdoor mounting.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 1kW, suitable for arrays up to 1200Wp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart-up voltage\u003c\/strong\u003e, 60V, so generation begins early morning and late afternoon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT efficiency\u003c\/strong\u003e, dynamic tracking above 99%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax DC input voltage\u003c\/strong\u003e, 600V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel compatibility\u003c\/strong\u003e, 36, 54 and 72-cell configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, IP65 enclosure, QNS anti-islanding included as standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe wide 0 to 8A current input range makes the inverter compatible with a broad set of modern panel designs, while the dynamic MPPT continues tracking the maximum power point regardless of cell count or configuration. QNS anti-islanding protection disconnects the unit from the grid automatically if supply is interrupted, meeting grid connection requirements. DRM (Demand Response Mode) is built in. The inverter carries a 5-year standard warranty and a design life stated at over 20 years.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSmall residential grid-connected solar PV systems\u003c\/li\u003e\n\u003cli\u003eInstallations with a small number of panels feeding the grid\u003c\/li\u003e\n\u003cli\u003eRetrofit additions to existing arrays needing a dedicated small-array inverter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or MCS-accredited solar installer. UK grid-connected inverters require G98 notification or G99 application to the DNO before connection, and all DC isolators, AC protection and earthing must comply with BS 7671 and the relevant MCS standards. This is not a DIY connection to the grid.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52053961605408,"sku":"S5-GR1P1K-M-EU-M08-4-CT","price":304.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s5-gr1p1k-m-eu-m08-4-ct-1.webp?v=1785425291"},{"product_id":"solis-2-5kw-dual-mppt-grid-tie-inverter","title":"Solis 2.5kW Dual MPPT Single Phase Grid-Tie Inverter | S6-GR1P2.5K-DC","description":"\u003cp\u003eThe \u003cstrong\u003eSolis S6-GR1P2.5K-DC\u003c\/strong\u003e is a 2.5kW single phase grid-tie inverter with dual MPPT, built for small residential solar PV installations. The fanless design keeps it quiet, and it supports up to 14A input current per string, working with high-efficiency and bifacial modules. An integrated DC switch, export power manager and AFCI protection come as standard, and the enclosure is IP66 rated.\u003c\/p\u003e\u003ch2\u003eKey features of this grid tie inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 2.5kW, single phase 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT inputs\u003c\/strong\u003e, dual MPPT, maximum input current 14A per string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, maximum 97.3%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, AFCI arc fault protection with integrated DC switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExport control\u003c\/strong\u003e, integrated Export Power Manager (EPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, fanless operation, IP66 rated enclosure, 11kg, 310 x 543 x 160mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to small residential rooftop solar PV systems, including grid-tied installations that need export limitation. As a grid tie power inverter it connects PV output directly to the domestic supply, feeding surplus generation back to the grid.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eGrid connection requires G98 compliance in the UK, and installation must be carried out by a qualified MCS-accredited installer. A compatible Wi-Fi datalogger is available separately for SolisCloud remote monitoring.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060749332768,"sku":"S6-GR1P2.5K-DC","price":325.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p2-5k-dc-1.webp?v=1785502518"},{"product_id":"three-phase-grid-tie-inverter-15kw","title":"Sunny Tripower X 15kW 3-Phase Grid-Tie Inverter | SMA","description":"\u003cp\u003eThe SMA Sunny Tripower X 15kW is a three phase grid-tied solar inverter built for commercial PV systems and larger residential installations. Three independent MPP trackers, a maximum input voltage of 1000VDC and an IP65 enclosure give it a specified platform for demanding solar projects.\u003c\/p\u003e\u003ch2\u003eThree phase grid tie inverter with independent string management\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated AC output\u003c\/strong\u003e, 15kW at 230V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPP trackers\u003c\/strong\u003e, three independent trackers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax input voltage\u003c\/strong\u003e, 1000VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPP voltage range\u003c\/strong\u003e, 260-800V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax input current per tracker\u003c\/strong\u003e, 24A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 98.2% maximum, 97.8% European\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65, suitable for outdoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSMA ShadeFix optimises yield during partial shading at inverter level\u003c\/li\u003e\n\u003cli\u003eSMA ArcFix provides active DC arc-fault detection\u003c\/li\u003e\n\u003cli\u003eIntegrated system manager monitors and controls up to 5 SMA inverters and one energy meter\u003c\/li\u003e\n\u003cli\u003eSMA Dynamic Power Control for active and reactive power management\u003c\/li\u003e\n\u003cli\u003eEthernet, local WLAN and RS485 communication, with SMA Modbus and SunSpec Modbus protocols\u003c\/li\u003e\n\u003cli\u003eOptiCool thermal management\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProduct overview\u003c\/h3\u003e\u003cp\u003eThis 15kW model sits within the Sunny Tripower X range, which spans 12kW to 25kW on a shared platform and installation footprint. The three MPP trackers let strings on different roof orientations or with different shading run independently, which helps yield across complex arrays. The system manager removes the need for a separate monitoring device on smaller commercial sites, coordinating up to five inverters, and connects directly to Sunny Portal via ennexOS for remote monitoring.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eCommercial rooftop and ground-mounted PV, larger residential systems, multi-inverter installations with centralised monitoring, and sites with partial shading or multiple roof orientations.\u003c\/p\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrical engineer or MCS-accredited solar installer. G99 notification and DNO approval are required at this power level in the UK. DC wiring, string fusing, AC protection and earthing must follow IET Wiring Regulations and SMA's installation manual, with commissioning via SMA tools before operation.\u003c\/p\u003e","brand":"SMA","offers":[{"title":"Default Title","offer_id":52060751429920,"sku":"STP15-50","price":2855.48,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-stp15-50-1.webp?v=1785503194"},{"product_id":"solis-2kw-mini-grid-tie-inverter","title":"Solis 2kW Mini Grid-Tie Solar Inverter | S6-GR1P2K-M-DC","description":"\u003cp\u003eThe \u003cstrong\u003eSolis S6-GR1P2K-M-DC\u003c\/strong\u003e is a 2kW single phase grid-tied inverter from the S6 Mini Series. It's fanless, compact and weighs just 7.4kg, making it suited to small residential PV systems running a single panel string up to 14A.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 2kW rated, single phase 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT\u003c\/strong\u003e, single MPPT, 14A maximum input current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, maximum 97.1%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, AFCI arc fault protection, integrated DC switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower management\u003c\/strong\u003e, integrated Export Power Manager (EPM), Demand Response Mode (DRM) and backflow power control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP66 rated, fanless design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u0026amp; weight\u003c\/strong\u003e, 310 x 373 x 160mm, 7.4kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years standard, extendable to 20 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eBuilt for small residential rooftop solar PV systems, including balcony and small-array grid-tied installations where a compact single-phase inverter is needed.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eGrid connection requires G98 compliance in the UK, and installation must be carried out by a qualified MCS-accredited installer. An optional Wi-Fi dongle is available separately for SolisCloud remote monitoring.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060753101088,"sku":"S6-GR1P2K-M-DC","price":239.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p2k-m-dc-1.webp?v=1785503476"},{"product_id":"solis-17kw-three-phase-inverter","title":"Solis 5G 17kW Three Phase Grid-Tie Inverter | S5-GR3P17K-DC","description":"\u003cp\u003eThe \u003cstrong\u003eSolis S5-GR3P17K-DC\u003c\/strong\u003e is a 17kW three-phase grid-tied solar inverter built for commercial installations. It reaches 98.7% maximum efficiency and uses two independent MPPT trackers spanning a 160V to 1000V range, with a 180V startup voltage that lets it begin generating earlier in the day.\u003c\/p\u003e\u003ch2\u003eKey features of this solis 3 phase inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 17kW, three phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum efficiency\u003c\/strong\u003e, 98.7%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT trackers\u003c\/strong\u003e, 2 independent, 160V to 1000V range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStartup voltage\u003c\/strong\u003e, 180V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString input current\u003c\/strong\u003e, 16A maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure rating\u003c\/strong\u003e, IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby consumption\u003c\/strong\u003e, below 1W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe natural convection cooling design removes the fan failure risk associated with active-cooled inverters over long service life. In dusty environments such as agricultural buildings or industrial sites, fans accumulate debris and need regular cleaning; a fanless approach avoids that maintenance entirely.\u003c\/p\u003e\u003cp\u003eA 180V startup voltage lets the inverter begin generating at lower irradiance than many comparable units, extending effective generation time either side of peak sun. On a UK site this can add useful output during spring and autumn mornings.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCommercial and industrial rooftop solar systems\u003c\/li\u003e\n\u003cli\u003eAgricultural buildings and farm solar installations\u003c\/li\u003e\n\u003cli\u003eSites requiring low-maintenance fanless inverter operation\u003c\/li\u003e\n\u003cli\u003eInstallations with export limitation requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThree-phase grid connection requires G99 compliance and DNO notification in the UK. Installation must be carried out by a qualified MCS-accredited installer, and string voltage should be calculated under cold conditions to stay within the 1000V maximum input.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060754182432,"sku":"S5-GR3P17K-DC","price":996.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s5-gr3p17k-dc-1.webp?v=1785503803"},{"product_id":"solis-6kw-dual-mppt-inverter","title":"Solis 6kW Dual MPPT Single Phase Grid-Tie Inverter | S6-GR1P6K-DC","description":"\u003cp\u003eThe Solis S6-GR1P6K-DC is a 6kW single phase grid-tied inverter built for residential solar PV systems. Dual MPPT gives it two independent string inputs, each rated for up to 14A, so it suits high-output and bifacial modules without derating. An integrated DC switch, export power manager and AFCI arc fault protection come as standard, and the enclosure carries an IP66 rating.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 6kW, single phase 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs\u003c\/strong\u003e, dual MPPT, 2 string inputs, 14A per string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 97.7% maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT voltage range\u003c\/strong\u003e, 90V to 520V, maximum input 600V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart-up voltage\u003c\/strong\u003e, 120V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended maximum PV power\u003c\/strong\u003e, 9kW\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt-in protection and control\u003c\/h2\u003e\u003cp\u003eAn Export Power Manager (EPM) is integrated for sites with export limitation requirements, alongside AFCI arc fault detection and an on-board DC switch. These come fitted as standard rather than as separate accessories.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential rooftop solar PV installs, grid-tied systems that need export limiting, and arrays using high-output or bifacial panels. The unit weighs 12kg and measures 310 x 543 x 160mm.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eUK grid connection requires G98 compliance, and installation should be carried out by an MCS-accredited installer. String voltage needs calculating for cold conditions and confirming against the 600V maximum input. A compatible Wi-Fi datalogger is sold separately for SolisCloud remote monitoring.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060755624224,"sku":"S6-GR1P6K-DC","price":498.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p6k-dc-1.webp?v=1785503909"},{"product_id":"solis-5g-pro-100kw-inverter","title":"Solis 100kW 3-Phase Grid-Tied Solar Inverter | 5G Pro","description":"\u003cp\u003eThe Solis 5G Pro 100kW is a transformerless three-phase grid-tied solar inverter built for commercial and industrial PV installations. It runs at up to 98.7% maximum efficiency (98.3% EU efficiency), using 6 or 8 MPPT trackers to handle up to 16 string inputs across large, high-density arrays.\u003c\/p\u003e\u003ch2\u003eGrid tied solar inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 100kW, with a peak of 110kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 98.7% maximum, 98.3% EU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT design\u003c\/strong\u003e, 6 or 8 trackers with up to 16 string inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString input current\u003c\/strong\u003e, 36A maximum per string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC\/AC ratio\u003c\/strong\u003e, above 150% for dense array layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP66 rated with intelligent redundant fan cooling\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNight SVG lets the inverter supply reactive power compensation to the grid outside solar generation hours, which matters on sites with grid operator power factor requirements. AFCI arc fault protection and PID recovery are available as optional functions.\u003c\/p\u003e\u003ch2\u003eWhy the 36A string current and 150% DC ratio matter\u003c\/h2\u003e\u003cp\u003eA 36A maximum string input current suits current high-output bifacial modules, which often produce string currents above 20A in real conditions. The 150% DC overloading allowance means a larger PV array can be connected against the inverter's AC rating, improving how much of the inverter's capacity gets used across the day.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge commercial and industrial rooftop solar systems\u003c\/li\u003e\n\u003cli\u003eGround-mounted solar farms and utility-scale arrays\u003c\/li\u003e\n\u003cli\u003eInstallations using high-output bifacial modules\u003c\/li\u003e\n\u003cli\u003eSites with grid reactive power compensation requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eGrid connection at this power level needs G99 compliance and a formal DNO application in the UK. Installation should be carried out by a qualified electrical engineer with commercial solar experience, with string design, array layout and protection coordination finalised before commissioning.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060759621920,"sku":"003073","price":3622.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-003073-1.webp?v=1785504452"},{"product_id":"solis-3kw-dual-mppt-grid-tie-inverter","title":"Solis 3kW Dual MPPT Single Phase Grid-Tie Inverter | S6-GR1P3K-DC","description":"\u003cp\u003eThe \u003cstrong\u003eSolis S6-GR1P3K-DC\u003c\/strong\u003e is a 3kW single phase grid-tied inverter with dual MPPT, built for residential solar PV installations. It weighs 11.2kg and accepts up to 14A per string, working with high-efficiency and bifacial modules. An integrated DC switch, export power manager and AFCI protection are built in, and the enclosure is IP66 rated.\u003c\/p\u003e\u003ch2\u003eSolis 3kW inverter key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 3kW, single phase 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT inputs\u003c\/strong\u003e, dual MPPT, maximum input current 14A per string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, maximum 97.3%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated Export Power Manager (EPM), AFCI arc fault protection and DC switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP66 rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize and weight\u003c\/strong\u003e, 310 x 543 x 160mm, 11.2kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis inverter suits residential rooftop solar PV systems, including installations where export limitation is required by the network operator.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eGrid connection must meet G98 compliance in the UK, and installation should be carried out by an MCS-accredited installer. A compatible Wi-Fi datalogger is available separately for SolisCloud remote monitoring.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060760375584,"sku":"S6-GR1P3K-DC","price":346.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p3k-dc-1.webp?v=1785504690"},{"product_id":"solis-3kw-grid-tie-inverter","title":"Solis 3kW Mini Grid-Tie Solar Inverter | S6-GR1P3K-M-DC","description":"\u003cp\u003eThe \u003cstrong\u003eSolis S6-GR1P3K-M-DC\u003c\/strong\u003e is a 3kW single phase grid-tie inverter from the S6 Mini Series. It's compact, fanless and weighs just 7.4kg, making it easy to mount in tight plant rooms or garages. A single MPPT handles up to 14A maximum string input current and the design works with high-efficiency and bifacial modules.\u003c\/p\u003e\u003ch2\u003eKey features of this solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 3kW, single phase 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, Single MPPT, 14A maximum input current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum efficiency\u003c\/strong\u003e, 97.1%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP66 rated, fanless design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, Integrated Export Power Manager, AFCI arc fault protection and integrated DC switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid compliance\u003c\/strong\u003e, Demand Response Mode (DRM) support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions and weight\u003c\/strong\u003e, 310 x 373 x 160mm, 7.4kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years as standard, extendable to 20 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential rooftop solar PV systems, including grid-tied installations where smart grid compliance is required.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eGrid connection needs G98 compliance in the UK, and fitting should be carried out by a qualified MCS-accredited installer. A Wi-Fi dongle for SolisCloud remote monitoring is available separately.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060761293088,"sku":"S6-GR1P3K-M-DC","price":313.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p3k-m-dc-1.webp?v=1785504835"},{"product_id":"solis-5kw-grid-tie-inverter","title":"Solis 5kW Single Phase Grid-Tie Solar Inverter | S6-GR1P5K-DC","description":"\u003cp\u003eThe Solis S6-GR1P5K-DC is a 5kW single phase grid-tie inverter for residential PV systems. It combines dual MPPT tracking, IP66 weatherproofing and built-in AFCI arc-fault protection, making it a well-specified option for UK and European rooftop solar installs.\u003c\/p\u003e\u003ch2\u003eKey features of this grid tie inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 5kW, with 97.7% peak efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual MPPT\u003c\/strong\u003e, up to 16A input current per string\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule compatibility\u003c\/strong\u003e, works with high-efficiency and bifacial panels up to 660W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP66 rated for outdoor mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety\u003c\/strong\u003e, integrated AFCI arc-fault circuit protection (activation required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid control\u003c\/strong\u003e, zero export power function, G98\/G99 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe MPPT voltage range runs from 90 to 550V, with a maximum input voltage of 600V and a 120V start-up voltage. Each of the two MPPT trackers takes up to 16A, so it pairs well with current high-output panels.\u003c\/p\u003e\u003cp\u003ePower factor stays above 0.99 and THDi below 3%, giving clean AC output to the grid. The transformerless design keeps the unit down to 8.9kg, which helps with wall mounting.\u003c\/p\u003e\u003cp\u003eAFCI monitors for DC arc faults in the array. Zero export control lets the inverter be set to stop energy flowing back to the grid, useful where export is restricted or the tariff is import-only.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential rooftop grid-tied solar PV systems\u003c\/li\u003e\n\u003cli\u003eSmall commercial rooftop installations\u003c\/li\u003e\n\u003cli\u003eNew build and retrofit solar projects across the UK and Europe\u003c\/li\u003e\n\u003cli\u003eSystems using high-efficiency or bifacial modules\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThis inverter must be installed by a qualified electrician or MCS-accredited solar installer. DC wiring, AC connection, grid protection settings and commissioning must follow G98 or G99 requirements as applicable, alongside IET Wiring Regulations and DNO notification procedures. This is not a DIY installation.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060766765344,"sku":"S6-GR1P5K-DC","price":660.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p5k-dc-1.webp?v=1785505511"},{"product_id":"solis-3-6kw-grid-tie-inverter","title":"Solis 3.6kW Single Phase Grid Tie Inverter | S6-GR1P3.6K-M-DC","description":"\u003cp\u003eThe Solis S6-GR1P3.6K-M-DC is a 3.6kW single phase grid tie inverter from the S6 Mini Series. It is fanless and compact, weighing 7.4kg, and supports a higher 19A maximum input current per string, making it suited to larger or high-output modules. The unit includes an export power manager, AFCI arc fault protection, an integrated DC switch and an IP66 rated enclosure.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 3.6kW, single phase 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput configuration\u003c\/strong\u003e, single MPPT, 19A maximum input current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 97.3% maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, AFCI arc fault protection and integrated DC switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP66 rated, fanless natural cooling design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions and weight\u003c\/strong\u003e, 310 x 373 x 160mm, 7.4kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis grid tie inverter suits residential rooftop solar PV systems, particularly installations using high-output modules that draw up to 19A of string current.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eGrid connection requires G98 compliance in the UK, and installation must be carried out by a qualified MCS-accredited installer. An optional Wi-Fi dongle is available separately for SolisCloud remote monitoring.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060768043296,"sku":"S6-GR1P3.6K-M-DC","price":351.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p3-6k-m-dc-1.webp?v=1785505747"},{"product_id":"solis-2-5kw-grid-tie-inverter","title":"Solis 2.5kW Mini Grid-Tie Solar Inverter | S6-GR1P2.5K-M-DC","description":"\u003cp\u003eThe \u003cstrong\u003eSolis S6-GR1P2.5K-M-DC\u003c\/strong\u003e is a 2.5kW single phase grid-tied inverter from the S6 Mini Series. It's fanless and compact, weighing 7.7kg, with a single MPPT rated for a 14A maximum input current. It works with high-efficiency and bifacial modules, and comes with export power manager, AFCI protection and an integrated DC switch built in.\u003c\/p\u003e\u003ch2\u003eSolis 2.5kW inverter key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 2.5kW, single phase 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT input\u003c\/strong\u003e, single MPPT, 14A maximum input current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum efficiency\u003c\/strong\u003e, 97.1%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP66 rated, fanless design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated Export Power Manager (EPM), AFCI arc fault protection, integrated DC switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid compliance\u003c\/strong\u003e, Demand Response Mode (DRM) and backflow power control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight \u0026amp; dimensions\u003c\/strong\u003e, 7.7kg, 310 x 373 x 160mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, standard 5-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to small residential rooftop solar PV systems, and to compact installations where space and weight are limited.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eGrid connection requires G98 compliance in the UK, and installation must be carried out by a qualified MCS-accredited installer. A Wi-Fi dongle for SolisCloud remote monitoring is available separately.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060768534816,"sku":"S6-GR1P2.5K-M-DC","price":261.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s6-gr1p2-5k-m-dc-1.webp?v=1785506023"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/solar-grid-tie-inverters.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}