{"title":"Off-Grid Kits","description":"\u003cp\u003eOff-grid kits bundle the core components for a standalone power system: solar panels, inverter or inverter charger, battery storage and the control cabinet or wiring to tie it together. They're built for properties, cabins and installations with no mains connection, or as backup for sites that need independence from the grid.\u003c\/p\u003e\u003cp\u003eThe range runs from compact 1500W setups with AGM or lithium batteries for smaller loads, up to multi-kilowatt cabinets with 400VAC three-phase output for larger properties and commercial sites. Some kits arrive as plug-and-play control cabinets, wired and assembled ready to connect; others are supplied as component kits for installers to configure on site.\u003c\/p\u003e\u003cp\u003eBattery chemistry and capacity vary by kit, from AGM and GEL through to lithium-ion packs from suppliers such as Pylontech and Pelio, alongside solar panels from JA Solar. A small-scale wind turbine option is also included for sites looking to add another generation source.\u003c\/p\u003e","products":[{"product_id":"off-grid-inverter-charger-5kw-cabinet","title":"Silent Power SP5048-C-P 5kW Off-Grid Inverter Charger Cabinet 48V","description":"\u003cp\u003eThe Voltacon Silent Power SP5048-C-P is a pre-wired 5kW 48V off-grid solar power cabinet built around a Conversol sine wave inverter-charger. It arrives with PV cables and the DC and AC protection accessories needed for a clean installation, so the bulk of the wiring work is already done before it reaches site. It works with AGM, lithium, LiFePO4 and flooded batteries.\u003c\/p\u003e\u003ch2\u003eOff grid inverter charger kit features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter-charger\u003c\/strong\u003e, 5kW Conversol sine wave unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem voltage\u003c\/strong\u003e, 48V battery, 230VAC output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection included\u003c\/strong\u003e, PV cables plus DC and AC protection accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, AGM, lithium, LiFePO4 and flooded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild state\u003c\/strong\u003e, pre-wired and ready to commission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic off-grid homes and cabins, and to remote buildings and agricultural premises where a grid connection isn't practical.\u003c\/p\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThis cabinet must be installed by a qualified electrician. Batteries and solar panels are ordered separately. All electrical work must comply with IET Wiring Regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053853077792,"sku":"0790404944733","price":2921.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404944733-1.webp?v=1785420410"},{"product_id":"off-grid-solar-kit-11kw-15kwh","title":"11kW Off-Grid Solar Kit 15kWh LiFePO4 4.6kW PV | Voltacon Supreme","description":"\u003cp\u003eThe Voltacon Supreme off-grid solar kit pairs an 11kW Conversol MAX-II inverter-charger with 15kWh of LiFePO4 lithium battery storage and 10x JA Solar 465W monocrystalline panels, giving 4,650W of total PV. It is supplied as a complete off grid solar power kit, with protection gear, monitoring and mounting included, ready for a full off-grid installation at a home, farm, workshop or commercial site.\u003c\/p\u003e\u003ch2\u003eKey features of this off grid solar kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter-charger\u003c\/strong\u003e, Conversol MAX-II 11kW with dual MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 15kWh LiFePO4 lithium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e, 10x JA Solar 465W monocrystalline, 4,650W total PV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant monitoring kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, full AC and DC protection included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtras\u003c\/strong\u003e, panel mounting structure, BMS communication cable and wiring diagram included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes, farms, workshops and commercial sites that need off-grid power, particularly where a grid connection is unavailable or unreliable.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis kit must be installed by a qualified electrician or an MCS-accredited solar installer. All wiring, protection and earthing must comply with IET Wiring Regulations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol MAX-II 11kW inverter-charger\u003c\/li\u003e\n\u003cli\u003e15kWh LiFePO4 lithium battery storage\u003c\/li\u003e\n\u003cli\u003e10x JA Solar 465W monocrystalline panels\u003c\/li\u003e\n\u003cli\u003eSolar Assistant monitoring kit\u003c\/li\u003e\n\u003cli\u003eAC and DC protection\u003c\/li\u003e\n\u003cli\u003ePanel mounting structure\u003c\/li\u003e\n\u003cli\u003eBMS communication cable\u003c\/li\u003e\n\u003cli\u003eWiring diagram\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060307947808,"sku":"PV11000W10P15KWH","price":6814.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pv11000w10p15kwh-1.webp?v=1785487445"},{"product_id":"silent-power-cabinet-33kw-off-grid","title":"33kW Floor-Mounted Silent Power Cabinet | Voltacon Off-Grid","description":"\u003cp\u003eThe Voltacon Silent Power 33kW is the largest single phase off-grid cabinet in the range and can also be configured as three phase. It comes in a floor-mounted industrial metallic enclosure with bottom cable entry, built for sites that need a self-contained off-grid power solution rather than a wall-mounted unit.\u003c\/p\u003e\u003ch2\u003eKey features of the 33kW off-grid power cabinet\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput configuration\u003c\/strong\u003e, 33kW, switchable between single phase and three phase 230V\/400VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, floor-mounted industrial metallic cabinet with bottom cable entry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant monitoring included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombiner boxes\u003c\/strong\u003e, integral AC and DC combiner boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery monitoring\u003c\/strong\u003e, smart shunt resistors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, full AC and DC surge protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSized for large off-grid commercial and agricultural sites that need 33kW of single or three phase power without a grid connection. The floor-standing format suits plant rooms and dedicated power enclosures rather than domestic wall space.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis is a high power system and must be installed and commissioned by a qualified electrical engineer. Protection coordination, earthing design and cable sizing all need careful planning at this scale. It is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060307980576,"sku":"SP3348-3PH","price":10473.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sp3348-3ph-1.webp?v=1785487467"},{"product_id":"off-grid-power-cabinet-15kw-24kw","title":"Triple Silent Off-Grid Power Cabinet 15kW\/24kW | Conversol MAX","description":"\u003cp\u003eThe Voltacon Triple Silent Power cabinet houses three parallel Conversol MAX 8kW inverters, delivering 15kW to 24kW of continuous AC power from a single or three phase configuration. It arrives factory wired and tested in the UK, ready for connection on site.\u003c\/p\u003e\u003ch2\u003eOff-grid power cabinet features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter set\u003c\/strong\u003e, 3x Conversol MAX 8kW inverters wired in parallel, giving 15kW or 24kW output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase configuration\u003c\/strong\u003e, configurable for single phase or three phase output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant monitoring included, with Wi-Fi connectivity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integral AC and DC combiner boxes and protection built into the cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, cooling fans fitted as standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion option\u003c\/strong\u003e, can integrate a 1kW wind turbine controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eBuilt for off-grid properties and commercial buildings with high power demand. Suited to remote sites needing single or three phase off-grid power without a grid connection.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis is a high power off-grid system and must be installed by a qualified electrician. Correct cable sizing, earthing and protection coordination are needed, along with commissioning by a qualified engineer. It is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"SP-15kW Inverters (3x5kW) \/ Without Wind Turbine","offer_id":52060308799776,"sku":"1023115","price":6890.63,"currency_code":"GBP","in_stock":true},{"title":"SP-15kW Inverters (3x5kW) \/ 1kW PMG Wind Turbine \u0026 Controller","offer_id":52060308832544,"sku":"10231151","price":10473.75,"currency_code":"GBP","in_stock":true},{"title":"SP-24kW Inverters (3x8kW) \/ Without Wind Turbine","offer_id":52060308865312,"sku":"10231152","price":10914.75,"currency_code":"GBP","in_stock":true},{"title":"SP-24kW Inverters (3x8kW) \/ 1kW PMG Wind Turbine \u0026 Controller","offer_id":52060308898080,"sku":"10231153","price":14497.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-1023115-1.webp?v=1785487542"},{"product_id":"wind-turbine-tower-kit-1kw","title":"Tower Kit for FuturEnergy AirForce 1 1kW Wind Turbine","description":"\u003cp\u003eThis tower kit is built for the FuturEnergy AirForce 1 1kW wind turbine, giving it a structure to stand on without the need for a concrete base. Ground anchors take the place of a poured foundation, which cuts down installation time and disruption to the site.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTower kit designed for the FuturEnergy AirForce 1 1kW wind turbine\u003c\/li\u003e\n\u003cli\u003eSpecial ground anchors mean no concrete foundation is required\u003c\/li\u003e\n\u003cli\u003eStrong, safe design intended for ease of assembly\u003c\/li\u003e\n\u003cli\u003eSuitable for off-grid and wind\/solar hybrid installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse this tower as the supporting structure for a FuturEnergy AirForce 1kW turbine, whether it forms part of a standalone off-grid setup or works alongside solar panels in a hybrid system.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified engineer. A site assessment, wind resource evaluation and structural ground assessment are all essential before the tower goes up.\u003c\/p\u003e","brand":"FuturEnergy","offers":[{"title":"Default Title","offer_id":52060311617824,"sku":"0790404942340","price":909.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404942340-1.webp?v=1785487962"},{"product_id":"off-grid-inverter-cabinet-5kw-6kw-pv","title":"Silent Power V7 5kW Off Grid Inverter Cabinet 6kW PV 48V\/230Vac","description":"\u003cp\u003eThe Silent Power V7 from Voltacon is an off-grid control cabinet built around a 5kW Axpert V7 inverter-charger with a fast MPPT charger that accepts up to 6kW of solar PV input. It runs a 48V battery system with 230VAC output, and comes assembled and tested in the UK before it reaches site.\u003c\/p\u003e\u003ch2\u003eKey features of this off grid inverter cabinet\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter-charger\u003c\/strong\u003e, 5kW Axpert V7 with fast MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar PV input\u003c\/strong\u003e, up to 6kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery system\u003c\/strong\u003e, 48V, 230VAC output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Wi-Fi enabled, Solar Assistant compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, AGM, lithium and LiFePO4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, assembled and tested in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic off-grid homes and remote buildings, as well as farm and rural off-grid power systems where mains connection isn't practical.\u003c\/p\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThis cabinet must be installed by a qualified electrician, with all electrical work carried out to IET Wiring Regulations. Batteries and solar panels are ordered separately and are not included with the cabinet.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060312731936,"sku":"SP-5048-6K-BPv","price":3034.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sp-5048-6k-bpv-1.webp?v=1785488116"},{"product_id":"11kw-off-grid-inverter-cabinet-48v","title":"Silent Power 11kW Off Grid Inverter Cabinet 48V | Conversol MAX III","description":"\u003cp\u003eThe Voltacon Silent Power 11kW cabinet is built around the Conversol MAX III dual-MPPT inverter-charger, wired and tested at the factory before it ships. It runs on a 48V battery system with 230VAC single phase output, and comes with a data logger and Solar Assistant monitoring already fitted.\u003c\/p\u003e\u003ch2\u003eKey features of this 11kw off grid inverter cabinet\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Conversol MAX III 11kW dual-MPPT inverter-charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery system\u003c\/strong\u003e, 48V, 230VAC output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant data logger included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, full AC and DC protection with surge protection on both sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerator support\u003c\/strong\u003e, auto-start capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, factory wired and tested before dispatch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid domestic and commercial properties with high demand, and remote sites needing 11kW of continuous power. It is designed for single phase off-grid setups.\u003c\/p\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician. Batteries and solar panels are not included and must be ordered separately.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060312863008,"sku":"SP11KW","price":4178.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sp11kw-1.webp?v=1785488169"},{"product_id":"1kw-wind-turbine-48v-battery-charger","title":"1kW Wind Turbine PMG 48V Battery Charger | FuturEnergy AirForce","description":"\u003cp\u003eThe FuturEnergy AirForce 1 is a 1kW wind turbine built around a three phase permanent magnet generator (PMG), paired with a 48V DC rectifier battery charger. It charges lead acid and LiFePO4 batteries and can run as a stand-alone wind system or alongside solar PV in a hybrid setup. The package includes a battery controller, remote monitoring software, cables and an anemometer.\u003c\/p\u003e\u003ch2\u003eKey features of this 1kW wind turbine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerator\u003c\/strong\u003e, 1kW three phase permanent magnet generator (PMG)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery charger\u003c\/strong\u003e, 48V DC rectifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, lead acid and LiFePO4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating modes\u003c\/strong\u003e, stand-alone wind or hybrid wind\/solar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied with\u003c\/strong\u003e, battery controller, remote monitoring software, cables and anemometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e, FuturEnergy in-house designed PMG\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid properties looking to charge a 48V battery bank from wind energy, either on its own or combined with solar PV in a hybrid system.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified engineer experienced with small wind systems. Wind resource assessment, tower foundation design and battery or grid connection all need to meet relevant standards and local planning requirements.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1kW PMG wind turbine\u003c\/li\u003e\n\u003cli\u003e48V DC rectifier battery charger\u003c\/li\u003e\n\u003cli\u003eBattery controller\u003c\/li\u003e\n\u003cli\u003eRemote monitoring software\u003c\/li\u003e\n\u003cli\u003eCables\u003c\/li\u003e\n\u003cli\u003eAnemometer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuturEnergy","offers":[{"title":"Default Title","offer_id":52060313518368,"sku":"0790404942210","price":3769.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404942210-1.webp?v=1785488273"},{"product_id":"off-grid-solar-cabinet-16kw-48v","title":"Silent Power SP1648-D 16kW Off Grid Cabinet 48V\/230V | Voltacon","description":"\u003cp\u003eThe Silent Power SP1648-D is a 16kW single phase off-grid control cabinet from Voltacon, built around two Conversol MAX inverter-chargers wired in parallel. Every unit is wired and tested in the UK before it ships, with Solar Assistant monitoring, AC and DC protection, and generator backup support built in. It suits domestic and commercial properties that need 16kW of continuous single phase off-grid power.\u003c\/p\u003e\u003ch2\u003eOff grid solar power system features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverters\u003c\/strong\u003e, 2x Conversol MAX inverter-chargers in parallel, 16kW total output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, single phase 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery system\u003c\/strong\u003e, 48V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, full AC and DC protection fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup\u003c\/strong\u003e, generator or grid backup support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic and commercial off-grid properties needing 16kW of single phase power, particularly where a generator or grid connection is available as backup. This cabinet forms the core of an off grid solar power kit sized for higher continuous loads.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician. High power off-grid systems need correct earthing, protection coordination, cable sizing and commissioning to operate safely.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060313616672,"sku":"0604947936912","price":5248.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0604947936912-1.webp?v=1785488305"},{"product_id":"8kw-off-grid-solar-cabinet","title":"8kW Off Grid Solar Cabinet | Silent Power SP848 Conversol MAX","description":"\u003cp\u003eThe Silent Power SP848 is a pre-wired 8kW off-grid solar cabinet from Voltacon, built around the Conversol MAX dual-MPPT inverter-charger. It arrives factory wired and tested, with Solar Assistant monitoring fitted and full AC and DC protection in place. Connect your batteries and panels and the system is ready to generate power.\u003c\/p\u003e\u003ch2\u003e8kW off grid solar power system features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter-charger\u003c\/strong\u003e, Conversol MAX 8kW dual-MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery system\u003c\/strong\u003e, 48V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC output\u003c\/strong\u003e, 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, full AC and DC protection fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, factory wired and tested\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic and agricultural off-grid properties, and remote buildings needing 8kW of continuous power without a grid connection.\u003c\/p\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThis cabinet must be installed by a qualified electrician. Batteries and solar panels are ordered separately and are not included.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060314009888,"sku":"SP-848","price":3412.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sp-848-1.webp?v=1785488333"},{"product_id":"10kw-off-grid-inverter-charger-cabinet","title":"Silent Power SP1048-D 10kW Off-Grid Inverter Charger Cabinet 48V","description":"\u003cp\u003eThe Silent Power SP1048-D is a complete off-grid inverter charger cabinet from Voltacon, built around a 10kW inverter with 4 independent MPPT solar inputs accepting up to 12kW of PV. It runs on a 48V battery system and outputs 230VAC, arriving pre-assembled and ready to install.\u003c\/p\u003e\u003ch2\u003eOff grid inverter charger features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter charger\u003c\/strong\u003e, 10kW rating with 4 independent MPPT solar inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar PV input\u003c\/strong\u003e, up to 12kW maximum across the MPPT inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery voltage\u003c\/strong\u003e, 48V system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC output\u003c\/strong\u003e, 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant on an Orange Pi LTS, included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, full AC and DC protection accessories included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuits off-grid homes, farms and commercial sites needing 10kW of continuous power, particularly where a large solar array can supply up to 12kW of PV to make the most of the four MPPT inputs.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician. The cabinet is supplied ready to install and commission, complete with wiring instructions, but batteries, solar panels and mounting hardware are not included and must be ordered separately.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060314239264,"sku":"0790404944764","price":5248.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404944764-1.webp?v=1785488348"},{"product_id":"off-grid-inverter-charger-3kw-24v","title":"3kW Off-Grid Inverter Charger Cabinet 24V | Silent Power 3024-S-P","description":"\u003cp\u003eThe Silent Power 3024-S-P is a pre-wired 3kW off-grid solar power cabinet built around a 24V battery system. It houses a Conversol sine wave inverter-charger along with PV cables and protection accessories, all wired ready for commissioning. This is a Voltacon product designed for smaller off-grid properties and outbuildings.\u003c\/p\u003e\u003ch2\u003eKey features of this off grid inverter charger\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter-charger\u003c\/strong\u003e, 3kW Conversol sine wave unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery system\u003c\/strong\u003e, 24V, with 230VAC output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded accessories\u003c\/strong\u003e, PV cables and protection accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild state\u003c\/strong\u003e, pre-wired and ready to commission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to small off-grid homes, cabins and outbuildings running on 24V battery systems, where a compact single cabinet solution simplifies installation.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician and comply with IET Wiring Regulations. Batteries and solar panels are not included and must be ordered separately.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060316270880,"sku":"0790404944948","price":3197.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404944948-1.webp?v=1785488588"},{"product_id":"off-grid-solar-kit-16kw-pylontech-us5000","title":"16kW Off-Grid Solar Kit 20kWh Pylontech US5000 | JA Solar 465W Panels","description":"\u003cp\u003eThis 16kW off-grid solar kit pairs two parallel Conversol MAX 8kW inverter-chargers with four Pylontech US5000 lithium batteries, giving 20kWh of usable storage at 95% depth of discharge. Twenty JA Solar 465W monocrystalline panels provide 9,300W of PV capacity, and the system can be expanded to 40 panels (18,600W) with up to six parallel inverters. It suits domestic and small commercial properties that need continuous off-grid power or grid-backup capability.\u003c\/p\u003e\u003ch2\u003eSolar off-grid kit features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 16kW from two Conversol MAX 8kW units running in parallel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 4x Pylontech US5000 48V 5.12kWh batteries, 20kWh total at 95% DoD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar array\u003c\/strong\u003e, 20x JA Solar 465W monocrystalline panels, 9,300W total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion\u003c\/strong\u003e, supports up to 40 panels (18,600W) and six parallel inverters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging\u003c\/strong\u003e, AC charge timer for off-peak overnight tariffs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant kit included with no subscription fee\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2x Conversol MAX 8kW MPPT inverter-charger\u003c\/li\u003e\n\u003cli\u003e4x Pylontech US5000 48V 5.12kWh lithium battery\u003c\/li\u003e\n\u003cli\u003e20x JA Solar 465W monocrystalline panels with mounting structure\u003c\/li\u003e\n\u003cli\u003eBlack metal indoor cabinet\u003c\/li\u003e\n\u003cli\u003e2x battery disconnector 200A and 4x battery fuses\u003c\/li\u003e\n\u003cli\u003e50m 6mm red and 50m 6mm black solar cable\u003c\/li\u003e\n\u003cli\u003eAC combiner box for paralleling two AC outputs\u003c\/li\u003e\n\u003cli\u003eBMS communication cable\u003c\/li\u003e\n\u003cli\u003e2x 2-metre 70mm² battery power cables\u003c\/li\u003e\n\u003cli\u003eSolar PV combiner box 4-in\/4-out\u003c\/li\u003e\n\u003cli\u003eVictron Lynx Distributor (1000A busbar)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic off-grid power systems, grid-backup for homes and small commercial sites, properties with unreliable grid supply, and EV charging alongside home energy use. Panels come with an adjustable triangular mounting structure for flat surfaces and ground mounting; other mounting options are available on request.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician experienced with off-grid and battery storage systems. DC wiring, battery connections, fusing, earthing and ventilation must follow IET Wiring Regulations and the manufacturers' guidelines. This is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060749234464,"sku":"PV16K20KWH","price":10867.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pv16k20kwh-1.webp?v=1785502460"},{"product_id":"off-grid-solar-power-kit-15kwh","title":"5.6kW Off-Grid Solar Kit 15kWh Battery Storage | Voltacon","description":"\u003cp\u003eThis 5.6kW off-grid solar kit from Voltacon is built around a Conversol MKS IV 5.6kW inverter-charger, three Pylontech US5000 lithium batteries giving 15kWh of usable storage, and eight 425W full black monocrystalline panels. It is designed and assembled in the UK and arrives palletised with a wiring diagram and technical support.\u003c\/p\u003e\u003ch2\u003eKey features of this off-grid solar kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter-charger\u003c\/strong\u003e, Conversol MKS IV 5.6kW single-MPPT, 48V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 3x Pylontech US5000 48V 5.12kWh batteries, 15kWh total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e, 8x 425W full black half cut monocrystalline (3,400W total PV)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable\u003c\/strong\u003e, up to 6,000W PV input, additional batteries can be added\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant kit (Orange Pi) with communication cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup switching\u003c\/strong\u003e, motorised 63A changeover switch for grid or generator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe MKS IV inverter charges the Pylontech battery bank directly from the panels through its single MPPT input, and further panels can be added up to the 6kW PV limit without changing the inverter. The three US5000 batteries communicate with the inverter through a BMS cable, managing charge and discharge automatically.\u003c\/p\u003e\u003cp\u003eThe motorised changeover switch moves the system between off-grid solar supply and a grid or generator source when battery charge drops below the configured threshold, so supply continues without manual switching. A Victron Lynx Distributor handles DC bus distribution with integrated fusing for the battery cables and inverter DC inputs.\u003c\/p\u003e\u003cp\u003eMounting is via an adjustable triangle bracket for flat surface or ground installation. Contact Voltacon before ordering if a different mounting arrangement is needed.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x Conversol MKS IV 5.6kW inverter-charger\u003c\/li\u003e\n\u003cli\u003e3x Pylontech US5000 48V 5.12kWh lithium batteries with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e8x 425W full black half cut monocrystalline solar panels with mounting structure\u003c\/li\u003e\n\u003cli\u003e1x Solar Assistant monitoring kit (Orange Pi) with communication cables\u003c\/li\u003e\n\u003cli\u003e1x Victron Lynx Distributor\u003c\/li\u003e\n\u003cli\u003e1x Motorised changeover switch 63A\u003c\/li\u003e\n\u003cli\u003e2x 100A Mersen fuse disconnectors\u003c\/li\u003e\n\u003cli\u003e1x Solar PV combiner box with DC isolator, 20A fuses and surge protection\u003c\/li\u003e\n\u003cli\u003e1x 25A AC isolator\u003c\/li\u003e\n\u003cli\u003e25m red and 25m black 6mm solar cable\u003c\/li\u003e\n\u003cli\u003eWiring diagram and installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic off-grid solar power systems, grid or generator backup for homes and small businesses, and remote properties without a reliable grid connection.\u003c\/p\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eThis kit must be installed by a qualified electrician. Battery connections, DC fusing, AC output wiring, BMS communication and earthing must comply with IET Wiring Regulations and the manufacturers' installation guidelines. Do not attempt DIY installation of the inverter or battery systems.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060749398304,"sku":"PV5600W8P3US5K","price":6945.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pv5600w8p3us5k-1.webp?v=1785502574"},{"product_id":"5kw-solar-off-grid-kit-lithium-battery","title":"Complete 5kW Off-Grid Solar Kit with 5kWh Lithium Batteries | Conversol","description":"\u003cp\u003eThis complete off-grid solar kit combines a Conversol M-5K-24 all-in-one inverter, 5kWh of lithium battery storage and 6 x JA Solar 450W N-Type monocrystalline panels for a 2700W PV array. The inverter delivers up to 5000W continuous AC output and is built for homes, workshops, holiday cabins and remote buildings where mains power is unreliable or unavailable. A full wiring diagram is included to support a professional installation.\u003c\/p\u003e\u003ch2\u003eKey features of this solar off-grid kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 5000W continuous AC from the Conversol M-5K-24 all-in-one unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 5kWh total from 2 x 2.5kWh modules with active cell balancing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar array\u003c\/strong\u003e, 2700W from 6 x JA Solar 450W N-Type monocrystalline panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable storage\u003c\/strong\u003e, battery modules can be paralleled up to 16 units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery enclosure\u003c\/strong\u003e, IP65 aluminium, suitable for indoor or outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection included\u003c\/strong\u003e, DC fuses, 100A isolator switch and PV combiner box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBattery specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eLIO-II-2410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal capacity\u003c\/td\u003e\n\u003ctd\u003e2.5kWh \/ 100Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e25.6V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous discharge current\u003c\/td\u003e\n\u003ctd\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak discharge current\u003c\/td\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in BMS\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible inverters\u003c\/td\u003e\n\u003ctd\u003e3000W to 5500W hybrid and off-grid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIP65 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e165 x 375 x 400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e26kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax parallel modules\u003c\/td\u003e\n\u003ctd\u003eUp to 16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x Conversol M-5K-24 5000W all-in-one solar inverter\u003c\/li\u003e\n\u003cli\u003e6 x JA Solar 450W N-Type monocrystalline panels (2700W total)\u003c\/li\u003e\n\u003cli\u003e2 x 2.5kWh lithium batteries with active cell balancing (5kWh total)\u003c\/li\u003e\n\u003cli\u003e25 metres of 6mm² solar cable pair (red\/black)\u003c\/li\u003e\n\u003cli\u003eDC fuses 100A and isolator switch\u003c\/li\u003e\n\u003cli\u003ePV combiner box (2 inputs \/ 1 output)\u003c\/li\u003e\n\u003cli\u003eConsumer unit with energy meter and MCB protection\u003c\/li\u003e\n\u003cli\u003e5 metres of 3-core AC cable\u003c\/li\u003e\n\u003cli\u003eWarranty certificates: 1 year inverter, 5 years batteries, 35 years panels\u003c\/li\u003e\n\u003cli\u003eComprehensive wiring diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to remote homes without a reliable mains supply, holiday cabins and summer houses, workshops and outbuildings, and as backup power for essential household circuits.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation should be carried out by a qualified installer. Correct cable sizing, fusing and earthing are required for both the DC and AC circuits. Comply with local wiring regulations for any grid backup connection. Contact us for technical support before and during installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060750512416,"sku":"002789","price":3412.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002789-1.webp?v=1785502882"},{"product_id":"off-grid-solar-kit-8kw-agm-batteries","title":"8kW Off-Grid Solar Kit 14.4kWh AGM Batteries | Voltacon","description":"\u003cp\u003eThis Voltacon off-grid solar power kit pairs a Conversol MAX-II 8kW dual-MPPT inverter-charger with 14.4kWh of AGM\/GEL battery storage and ten 430W half cut monocrystalline solar panels. Designed, assembled and tested by Voltacon in the UK, it is supplied palletised with a wiring diagram, full component list and UK technical support.\u003c\/p\u003e\u003ch2\u003eOff-grid solar power kit features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Conversol MAX-II 8kW with dual independent MPPT chargers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 8x 300Ah 6V AGM\/GEL maintenance-free batteries, 14.4kWh total, mounted on steel racks in two shelves of four\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e, 10x 430W half cut monocrystalline panels, 4,300W total PV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandability\u003c\/strong\u003e, inverter accepts up to 8kW PV and the system can scale to 48kW with 6 parallel units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant monitoring with Orange Pi controller included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, adjustable triangle structure for 30-degree ground or flat surface installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x Conversol MAX-II 8kW dual-MPPT inverter-charger\u003c\/li\u003e\n\u003cli\u003e8x Voltacon 300Ah 6V AGM\/GEL batteries on steel battery racks\u003c\/li\u003e\n\u003cli\u003e10x 430W half cut monocrystalline solar panels\u003c\/li\u003e\n\u003cli\u003eAdjustable triangle mounting structure\u003c\/li\u003e\n\u003cli\u003e1x Solar Assistant monitoring kit (Orange Pi)\u003c\/li\u003e\n\u003cli\u003e1x 200A fuse disconnector set (48V)\u003c\/li\u003e\n\u003cli\u003e1x Solar PV combiner box with DC isolator, 20A inline fuses and surge protection\u003c\/li\u003e\n\u003cli\u003e1x 40A AC isolator\u003c\/li\u003e\n\u003cli\u003e25m red and 25m black 6mm solar cable\u003c\/li\u003e\n\u003cli\u003eWiring diagram and installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the system works\u003c\/h2\u003e\u003cp\u003eThe dual MPPT design lets two independent solar strings connect to the inverter at once. The kit covers one MPPT input at 4.3kW, and a second PV string of up to 4kW can be added later without swapping hardware. The AGM\/GEL battery bank uses sealed valve-regulated lead-acid technology, so there is no electrolyte checking or topping up, and it can be expanded with an identical set of 8 batteries. Batteries arrive filled and charged.\u003c\/p\u003e\u003ch3\u003eGrid notification and compliance\u003c\/h3\u003e\u003cp\u003eBecause this off-grid solar kit has no grid export, it does not require a G98 or G99 notification to the DNO, which simplifies approval compared with grid-tied systems. All electrical work must still meet IET Wiring Regulations and be carried out by a qualified electrician.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDomestic off-grid properties and rural buildings\u003c\/li\u003e\n\u003cli\u003eFarm and agricultural off-grid power\u003c\/li\u003e\n\u003cli\u003eRemote site power for workshops, cabins and outbuildings\u003c\/li\u003e\n\u003cli\u003eGenerator-backup off-grid systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eThis kit must be installed by a qualified electrician. Battery connections, DC fusing, AC output wiring, earthing and ventilation must follow IET Wiring Regulations and the component manufacturers' installation guidelines. DIY installation of high-current DC or inverter systems is not recommended.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060752052512,"sku":"VSK8K14KWH","price":5953.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-vsk8k14kwh-1.webp?v=1785503401"},{"product_id":"solar-panel-kit-battery-inverter-3-6kw","title":"3.6kW Off-Grid Solar Kit Inverter MPPT Battery | Conversol","description":"\u003cp\u003eThis Voltacon off-grid solar kit is built around a 3.6kW Conversol inverter with an integrated 80A MPPT charger, paired with six 550W bifacial panels and four 150Ah GEL batteries on a 24V bank. It is sized to run AC loads up to 3kW continuously, and the whole system is assembled and tested in the UK before being delivered palletised with wiring instructions and technical support.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, 3.6kW Conversol off-grid inverter with integrated 80A MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery bank\u003c\/strong\u003e, 24V system, max PV input 4000W, MPPT range 30 to 115VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge current\u003c\/strong\u003e, max solar charge current 60A, max AC charge current 60A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, peak 93% in line mode, 90% in battery mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e, 6x 550W bifacial monocrystalline panels, 3,300W total PV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries\u003c\/strong\u003e, 4x 150Ah 12V GEL batteries with 12-year design life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTriangle adjustable mounting structure for flat surface installation\u003c\/li\u003e\n\u003cli\u003e15m red and 15m black 4mm solar flexible cable\u003c\/li\u003e\n\u003cli\u003e80A battery fuse and disconnector\u003c\/li\u003e\n\u003cli\u003e15A panel fuses and DC isolator for panels\u003c\/li\u003e\n\u003cli\u003e2.5 metre battery cables\u003c\/li\u003e\n\u003cli\u003eSmall consumer unit\u003c\/li\u003e\n\u003cli\u003e5m AC 3-core 6mm power cable for 230VAC output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSystem overview\u003c\/h2\u003e\u003cp\u003eThe 24V GEL battery bank provides 7.2kWh of gross energy storage, and the bifacial panel layout can pick up additional generation from reflected light on the rear side, depending on the installation. The MPPT charger takes up to 4,000W of solar input with up to 10% overload tolerance, and can also top up the batteries from mains or a generator at up to 60A. A generator can be set to auto-start via the auxiliary contact once the battery charge drops below a set threshold.\u003c\/p\u003e\u003cp\u003eThe included mounting structure is a triangular adjustable bracket for flat roof or ground installations. Contact Voltacon before ordering if a different mounting arrangement is needed; the mounting kit can be swapped at no extra cost.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic off-grid properties, cabins, and backup power for homes or small commercial premises. It also works for remote sites without a practical grid connection, and for generator-backed off-grid setups.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis kit must be installed by a qualified electrician, with battery connections, DC fusing, AC output wiring, and earthing carried out to IET Wiring Regulations. GEL batteries must be installed and charged within the manufacturer's specified temperature and voltage ranges. Do not attempt DIY installation of the inverter or battery system.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060753264928,"sku":"PVKIT3600","price":3064.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pvkit3600-1.webp?v=1785503571"},{"product_id":"off-grid-solar-kit-lithium-24v","title":"Off-Grid Solar Kit 24V 3.6kW with Lithium Battery | Voltacon","description":"\u003cp\u003eA complete off-grid solar power kit built around a Voltacon 3.6kW solar inverter with integrated MPPT battery charger. The kit delivers 3600W continuous AC output and pairs the inverter with 6 x 440W bifacial panels, a 2.5kWh 24V lithium battery and the cabling, protection devices and mounting hardware needed to get the system running.\u003c\/p\u003e\u003ch2\u003eOff grid solar panel kit with battery and inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 3.6kW continuous AC, pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, 2.5kWh 24V lithium with active cell balancing, IP65 enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar array\u003c\/strong\u003e, 2640W from 6 x 440W bifacial panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion\u003c\/strong\u003e, additional battery units can be added, up to 16 in parallel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC cabling\u003c\/strong\u003e, 25 metres red and 25 metres black 6mm² solar cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, AC consumer unit with surge protection, Mersen DC battery isolator with 2 x 100A fuses, solar string fuses, 25A AC isolator\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, remote buildings and cabins, backup power for essential loads, and agricultural buildings or workshops without a grid connection.\u003c\/p\u003e\u003ch3\u003eMounting and setup\u003c\/h3\u003e\u003cp\u003eThe mounting kit for the 6 panels allows an adjustable tilt of 15 to 30 degrees. A full wiring diagram and setup instructions are included, and installation should be carried out by a qualified installer.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x Voltacon 3.6kW solar inverter with MPPT charger, 230VAC\u003c\/li\u003e\n\u003cli\u003e1 x 2.5kWh 24V lithium battery (expandable)\u003c\/li\u003e\n\u003cli\u003e6 x 440W bifacial solar panels (2640W total)\u003c\/li\u003e\n\u003cli\u003e25m red and 25m black 6mm² solar DC cable\u003c\/li\u003e\n\u003cli\u003e2 x solar panel connectors\u003c\/li\u003e\n\u003cli\u003e5m 6mm² 3-core AC cable, 230V\u003c\/li\u003e\n\u003cli\u003e1 x AC consumer unit with surge protection\u003c\/li\u003e\n\u003cli\u003e2 x solar string fuses\u003c\/li\u003e\n\u003cli\u003e1 x solar panel DC isolator\u003c\/li\u003e\n\u003cli\u003e1 x AC isolator 25A\u003c\/li\u003e\n\u003cli\u003e6 x panel mounting kit, adjustable 15 to 30 degree tilt\u003c\/li\u003e\n\u003cli\u003e1 x Mersen DC battery isolator with 2 x 100A fuses\u003c\/li\u003e\n\u003cli\u003eWiring diagram and setup instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBattery specification\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eLIO-II-2410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal capacity\u003c\/td\u003e\n\u003ctd\u003e2.5kWh \/ 100Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\u003ctd\u003e25.6V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous discharge\u003c\/td\u003e\n\u003ctd\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak discharge\u003c\/td\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIP65 aluminium, indoor or outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e165 x 375 x 400mm \/ 26kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax parallel units\u003c\/td\u003e\n\u003ctd\u003eUp to 16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eWarranty: 1 year on the inverter, 5 years on the battery, 30 years on the panels.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060755951904,"sku":"002788","price":2403.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002788-1.webp?v=1785503952"},{"product_id":"off-grid-solar-power-kit-5kw","title":"5kW Multiplus-II GX AC Charger with US5000 Battery Storage | Victron","description":"\u003cp\u003eThe Victron Multiplus-II GX is a 5kW AC charger and inverter that charges Pylontech US5000 lithium-ion batteries directly from the mains, giving you an off grid solar power kit that works with or without solar panels already installed. Pair it with existing solar PV that has a feed-in tariff, or run it standalone using low-cost off-peak electricity.\u003c\/p\u003e\u003ch2\u003eOff grid solar power kit built around the Multiplus-II GX\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiplus-II GX 5kW\u003c\/strong\u003e inverter with integrated AC charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS5000 Pylontech battery\u003c\/strong\u003e with a 15 year design life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular\u003c\/strong\u003e energy storage that can be expanded over time\u003c\/li\u003e\n\u003cli\u003eNo need to feed energy back to the grid or apply for a feed-in tariff contract\u003c\/li\u003e\n\u003cli\u003eWorks with no solar panels connected, with the option to add photovoltaic modules later\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRunning alongside an existing FIT solar system\u003c\/h2\u003e\u003cp\u003eIf you already have Feed-in Tariff solar panels installed, the Multiplus-II GX AC charger connects in parallel. It charges the batteries from the FIT meter and the stored energy is used when you need it, without affecting your FIT earnings. External current sensing supports PowerControl and PowerAssist, with a maximum current of 50A or 100A. The current sensor is supplied with a 1m connection cable.\u003c\/p\u003e\u003ch2\u003ePylontech US5000 battery specification\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplier part number\u003c\/td\u003e\n\u003ctd\u003eUS5000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e39 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery type\u003c\/td\u003e\n\u003ctd\u003eLithium Ion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal energy\u003c\/td\u003e\n\u003ctd\u003e4800 Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth of discharge\u003c\/td\u003e\n\u003ctd\u003e95.00 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e48 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous discharge rate (normal use)\u003c\/td\u003e\n\u003ctd\u003e2400 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum discharge rate (5 minutes)\u003c\/td\u003e\n\u003ctd\u003e4800 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurge discharge rate (15 seconds)\u003c\/td\u003e\n\u003ctd\u003e5808 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum charge rate (5 minutes)\u003c\/td\u003e\n\u003ctd\u003e4800 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMultiplus-II Inverter GX 5kW with AC charger and lithium-ion batteries\u003c\/li\u003e\n\u003cli\u003eBattery cables and protection fuses, 160A\u003c\/li\u003e\n\u003cli\u003eBattery DC disconnector, 160A\u003c\/li\u003e\n\u003cli\u003eSingle-phase digital energy meter\u003c\/li\u003e\n\u003cli\u003eMounting brackets for batteries\u003c\/li\u003e\n\u003cli\u003eCurrent transformer sensor, 100A: 50mA, 5 metre cable\u003c\/li\u003e\n\u003cli\u003eMK3-USB programming adaptor\u003c\/li\u003e\n\u003cli\u003eUSB to RS485 cable for connecting the energy meter to the GX communication port\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"No US5000","offer_id":52060756476192,"sku":"ESS-5KW-US5000","price":1102.5,"currency_code":"GBP","in_stock":true},{"title":"4.8kWh - 1 Battery","offer_id":52060756508960,"sku":"ESS-5KW-US5000-1","price":2399.25,"currency_code":"GBP","in_stock":true},{"title":"9.6kWh - 2 Batteries + Brackets","offer_id":52060756541728,"sku":"ESS-5KW-US5000-2","price":3696.0,"currency_code":"GBP","in_stock":true},{"title":"14.4kWh - 3 Batteries + Brackets","offer_id":52060756574496,"sku":"ESS-5KW-US5000-3","price":4977.0,"currency_code":"GBP","in_stock":true},{"title":"19.2kWh - 4 Batteries + Cabinet","offer_id":52060756607264,"sku":"ESS-5KW-US5000-4","price":6867.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ess-5kw-us5000-1-1.webp?v=1785504141"},{"product_id":"11kw-off-grid-inverter-cabinet","title":"11kW Off-Grid Inverter Cabinet 48V Plug and Play | Voltacon","description":"\u003cp\u003eThe Voltacon Silent Power Cabinet is a factory-wired 11kW off-grid inverter system built into an IP65 industrial enclosure. It arrives fully assembled and pre-configured, so the only work left on site is connecting solar, battery, AC input and load cables.\u003c\/p\u003e\u003ch2\u003eKey features of this 11kW off-grid inverter cabinet\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, 11kW off-grid inverter on the Ultra MAX platform, single phase 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, dual MPPT charger with 2 x 6kW inputs, 12kW total PV capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC inputs\u003c\/strong\u003e, dual AC input supports grid and generator at the same time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC outputs\u003c\/strong\u003e, dual AC output, master output always live, secondary output programmable by timer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, PV surge protection, DC fuses, DC breaker, AC output RCD and 63A MCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Victron SmartShunt 500A for battery monitoring plus Solar Assistant online monitoring platform\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConnecting the cabinet\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolar: plug PV cables into the pre-fitted DC inputs\u003c\/li\u003e\n\u003cli\u003eGrid or generator: connect 230V AC cables to the AC input terminals\u003c\/li\u003e\n\u003cli\u003eLoad: connect single-phase supply to your property or building\u003c\/li\u003e\n\u003cli\u003eBattery: connect the pre-crimped battery cables to your lithium battery bank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, farms and remote buildings, and to hybrid installations running alongside grid or generator backup. The factory-tested enclosure suits sites where on-site wiring time needs to be kept to a minimum.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or solar installer. The cabinet arrives factory wired and tested, with on-site work limited to connecting solar, battery, AC input and AC load cables. Contact us before ordering to confirm battery compatibility and system sizing.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVoltacon Ultra 11K cabinet with cooling fan, AC relay and MCB for generator connection\u003c\/li\u003e\n\u003cli\u003eVictron SmartShunt 500A and BMS communication cable\u003c\/li\u003e\n\u003cli\u003eFree Solar LED light included with every cabinet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060756705568,"sku":"SP11KW-DUAL","price":3465.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sp11kw-dual-1.webp?v=1785504183"},{"product_id":"solar-off-grid-kit-8kw-450w","title":"8kW Off-Grid Solar Kit 10.24kWh Pylontech US5000 | Conversol MAX","description":"\u003cp\u003eThis 8kW off-grid solar kit pairs a Conversol MAX 8kW dual-MPPT inverter-charger with two Pylontech US5000 lithium batteries for 10.24kWh of usable storage. Ten JA Solar 450W monocrystalline panels supply 4,500W of PV capacity, with the inverter able to accept up to 8kW total PV for later expansion. Solar Assistant monitoring, DC and AC protection, cabling and the BMS communication cable are all included.\u003c\/p\u003e\u003ch2\u003eSolar off-grid kit overview\u003c\/h2\u003e\u003cp\u003eThe Conversol MAX dual-MPPT design gives two independent solar string inputs. This kit fills one string at 4.5kW, leaving room for a second string of up to 3.5kW without changing the inverter, bringing total PV to the 8kW maximum input.\u003c\/p\u003e\u003cp\u003eThe Pylontech US5000 batteries run at 48VDC with a 95% depth of discharge and talk to the inverter directly through the included BMS cable, so charge and discharge management is automatic once that connection is made. Solar Assistant gives real-time and historical performance data over Wi-Fi with no ongoing subscription.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Conversol MAX 8kW dual-MPPT inverter-charger, 48V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries\u003c\/strong\u003e, 2x Pylontech US5000 48V 5.12kWh, 10.24kWh total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e, 10x JA Solar 450W monocrystalline, 4,500W total PV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion\u003c\/strong\u003e, inverter accepts up to 8kW PV total; further US5000 batteries can be added\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant kit and BMS communication cable included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic off-grid systems, remote cabins, workshops, outbuildings and farm installations, and any property without a reliable grid supply. Off-grid systems of this type do not require G98 or G99 notification to the DNO, as there is no grid connection or export.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis kit must be installed by a qualified electrician. Battery connections, DC fusing, AC output wiring, BMS communication, earthing and ventilation must comply with IET Wiring Regulations and the manufacturers' installation guidelines. DIY installation of high-current DC or inverter systems is not recommended.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x Conversol MAX 8kW dual-MPPT inverter-charger\u003c\/li\u003e\n\u003cli\u003e2x Pylontech US5000 48V 5.12kWh lithium batteries\u003c\/li\u003e\n\u003cli\u003e2x Pylontech US5000 mounting brackets\u003c\/li\u003e\n\u003cli\u003e10x JA Solar 450W monocrystalline panels\u003c\/li\u003e\n\u003cli\u003e1x Solar Assistant monitoring kit\u003c\/li\u003e\n\u003cli\u003e1x BMS communication cable\u003c\/li\u003e\n\u003cli\u003e1x Battery disconnector 200A\u003c\/li\u003e\n\u003cli\u003e2x Battery fuses\u003c\/li\u003e\n\u003cli\u003e2x In-line 20A fuses\u003c\/li\u003e\n\u003cli\u003e1x Solar panel DC isolator 32A\u003c\/li\u003e\n\u003cli\u003e1x Pair MC4 connectors\u003c\/li\u003e\n\u003cli\u003e25m red and 25m black 6mm solar cable\u003c\/li\u003e\n\u003cli\u003e2m battery power cables\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060760178976,"sku":"VOLT-8KW-KIT","price":4567.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-volt-8kw-kit-1.webp?v=1785504583"},{"product_id":"solar-power-kit-off-grid-1500va","title":"Off-Grid Solar Power Kit 1500VA 12V with GEL Batteries | Conversol","description":"\u003cp\u003eThis 1500VA 12V off-grid solar power kit is built for cabins, outbuildings and small remote properties that need a self-contained power supply. At its core sits a Conversol 1200W\/1500VA MPPT inverter-charger, paired with two 430W bifacial half cut monocrystalline panels and an optional 150Ah GEL battery bank. Voltacon assembles and tests the kit in the UK before it ships, complete with wiring instructions and UK-based technical support.\u003c\/p\u003e\u003ch2\u003eOff-grid solar power kit features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter-charger\u003c\/strong\u003e, 1200W\/1500VA Conversol MPPT unit with 230VAC output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, single MPPT input, maximum solar charge current 40A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanels\u003c\/strong\u003e, two 430W bifacial half cut monocrystalline modules\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery bank\u003c\/strong\u003e, optional 150Ah 12V GEL batteries, selected at checkout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerator support\u003c\/strong\u003e, auxiliary contact for automatic generator start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabling\u003c\/strong\u003e, 15m red and 15m black 4mm solar cable, plus 5m 3-core 4mm AC output cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe MPPT charger draws power from the 430W panel string to charge the battery bank directly. When mains or generator supply is available, the inverter can also charge the batteries from AC input. The auxiliary generator contact starts a generator automatically once battery charge drops below a set threshold, keeping supply running when solar output is not enough on its own.\u003c\/p\u003e\u003cp\u003eThe 1500VA inverter carries continuous loads up to 1200W, enough for lighting, small appliances and basic electronics in a cabin or remote residential setting. Panels can be mounted in portrait, landscape, ground mount or roof mount arrangements; contact Voltacon before ordering if you need a different configuration.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to remote cabins, outbuildings and rural properties, small domestic off-grid systems, first-time solar installations, and generator backup setups with automatic transfer.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x 1200W\/1500VA Conversol MPPT inverter-charger, 230VAC\u003c\/li\u003e\n\u003cli\u003e2x 430W bifacial half cut monocrystalline panels\u003c\/li\u003e\n\u003cli\u003e150Ah 12V GEL batteries (optional, select at checkout)\u003c\/li\u003e\n\u003cli\u003eFuse disconnector for batteries\u003c\/li\u003e\n\u003cli\u003eDC isolator for solar panels and AC isolator\u003c\/li\u003e\n\u003cli\u003e15A panel fuses\u003c\/li\u003e\n\u003cli\u003e15m red and 15m black 4mm solar cable\u003c\/li\u003e\n\u003cli\u003e5m 3-core 4mm AC output cable, 230VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis kit must be installed by a qualified electrician, with battery connections, DC fusing, AC wiring and earthing carried out to IET Wiring Regulations. A panel mounting structure is not included; contact Voltacon to select the right mounting for your site.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"No Battery","offer_id":52060760441120,"sku":"500000","price":968.0,"currency_code":"GBP","in_stock":true},{"title":"1x 150Ah 12V","offer_id":52060760473888,"sku":"500000-1","price":1321.9,"currency_code":"GBP","in_stock":true},{"title":"2x 150Ah 12V","offer_id":52060760506656,"sku":"500000-2","price":1630.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-500000-1-1.webp?v=1785504736"},{"product_id":"off-grid-solar-cabinet-16kw-4-mppt","title":"16kW Off-Grid Solar Control Cabinet 4 MPPT | Conversol MAX","description":"\u003cp\u003eThe Voltacon 16kW off-grid solar control cabinet is a single phase energy system built around two parallel Conversol MAX 8kW inverter-chargers with four independent MPPT controllers. It arrives fully wired and tested in the UK, so a plug and play off grid solar system is ready for fast on-site commissioning on domestic and commercial installations. Solar Assistant monitoring with Orange Pi is included and pre-configured.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 16kW single phase via 2x Conversol MAX 8kW inverters in parallel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, 4 independent MPPT charge controllers, up to 16,000W total PV input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC distribution\u003c\/strong\u003e, 1000A copper busbar via Victron Lynx Distributor with 200A fuses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery monitoring\u003c\/strong\u003e, Victron SmartShunt 1000A with Bluetooth connectivity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabling\u003c\/strong\u003e, 70mm² heavy duty battery cables and double-insulated solar cabling with fused terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote monitoring\u003c\/strong\u003e, Solar Assistant controller (Orange Pi 3 LTS) with free licence, Wi-Fi access with no annual fees\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe cabinet integrates the off-grid power components into a single assembled enclosure, cutting on-site installation time compared with building a system from individual parts. The four independent MPPT controllers let multiple solar array strings be managed separately.\u003c\/p\u003e\u003cp\u003eThe Victron SmartShunt 1000A gives battery state of charge readings via Bluetooth from any Android device. The Solar Assistant controller monitors inverter performance in real time and gives remote access over Wi-Fi at no ongoing cost.\u003c\/p\u003e\u003ch3\u003eDimensions\u003c\/h3\u003e\u003cp\u003eThe cabinet measures 140cm wide x 120cm high x 25cm deep (model SP-1648-EM).\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic and commercial off-grid solar power systems, high demand single phase backup power installations, remote properties without a grid connection, and generator backup setups with soft start.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2x Conversol MAX 8kW inverter-chargers in parallel configuration\u003c\/li\u003e\n\u003cli\u003e4x independent MPPT solar charge controllers\u003c\/li\u003e\n\u003cli\u003eVictron Lynx Distributor with 200A fuses (1000A busbar)\u003c\/li\u003e\n\u003cli\u003eVictron SmartShunt 1000A with Bluetooth\u003c\/li\u003e\n\u003cli\u003eSolar Assistant controller (Orange Pi 3 LTS), pre-configured with free licence\u003c\/li\u003e\n\u003cli\u003eAC circuit breaker, RCD, and generator output breaker with soft start\u003c\/li\u003e\n\u003cli\u003eDC disconnectors for PV and battery\u003c\/li\u003e\n\u003cli\u003e70mm² battery cables\u003c\/li\u003e\n\u003cli\u003eDouble-insulated solar cabling with fused terminals\u003c\/li\u003e\n\u003cli\u003eUSB to RS232 cables for inverters and Pylontech batteries\u003c\/li\u003e\n\u003cli\u003eVE.Direct cable for SmartShunt monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis cabinet must be installed by a qualified electrician experienced in off-grid and battery storage systems. Battery connections, DC fusing, AC supply, earthing and ventilation must comply with IET Wiring Regulations and the manufacturer's installation guidelines. DIY installation of high-current DC or inverter systems is not recommended.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060762013984,"sku":"SP-1648-EM5000","price":5460.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sp-1648-em5000-1.webp?v=1785505041"},{"product_id":"off-grid-solar-kit-20kwh-battery","title":"11kW Off-Grid Solar Power Kit 20kWh Battery Storage | Voltacon","description":"\u003cp\u003eThis 11kW off grid solar power kit pairs a Conversol MAX-III 11kW off-grid inverter with 20kWh of lithium battery storage and ten JA Solar 450W panels, giving homes, farms and remote sites a complete route to energy independence. Solar power feeds your loads directly during the day, with any surplus stored in the battery bank for use overnight or on overcast days.\u003c\/p\u003e\u003ch2\u003eOff-grid solar power kit features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e: Conversol MAX-III 11kW off-grid inverter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e: 4 x US5000C lithium batteries in a black server cabinet, providing 20kWh total energy storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e: 10 x JA Solar 450W panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC cabling\u003c\/strong\u003e: red and black 6mm² solar DC cables, 25 metres total length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery protection\u003c\/strong\u003e: MERSEN fuse disconnector fitted with 250A fuses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e: Solar Assistant online monitoring platform for live performance and energy tracking.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes, farms, workshops, remote properties and commercial sites that need consistent power without a grid connection, or want an uninterruptible supply behind the meter. The system also supports optional grid connection and generator input, so batteries can top up from a low cost night tariff or a generator during extended low sun.\u003c\/p\u003e\u003ch3\u003eGrid backup without export\u003c\/h3\u003e\u003cp\u003eThe inverter is configured for non export operation, so no electricity is fed back into the grid. That means no export licence, approval process or long term energy supplier contract is needed when the optional grid connection is used.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol MAX-III 11kW off-grid inverter\u003c\/li\u003e\n\u003cli\u003e4 x US5000C lithium batteries in a server cabinet (20kWh total)\u003c\/li\u003e\n\u003cli\u003eRed and black 6mm² solar DC cables, 25 metres total\u003c\/li\u003e\n\u003cli\u003eMERSEN fuse disconnector with 250A fuses\u003c\/li\u003e\n\u003cli\u003eBMS communication cables and battery power cables\u003c\/li\u003e\n\u003cli\u003eLynx Power In DC distributor\u003c\/li\u003e\n\u003cli\u003eSolar Assistant monitoring\u003c\/li\u003e\n\u003cli\u003eSolar PV combiner box, 4 inputs and 4 outputs\u003c\/li\u003e\n\u003cli\u003eMounting kit for ground or flat roof installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA wiring diagram is supplied with every kit.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060762177824,"sku":"11KW20KWH","price":7245.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-11kw20kwh-1.webp?v=1785505127"},{"product_id":"solar-inverter-charger-22kw-cabinet","title":"22kW Off-Grid Solar Control Cabinet Single Phase | Conversol MAX","description":"\u003cp\u003eThe Voltacon 22kW Off-Grid Solar Control Cabinet is a complete single phase energy system built around dual parallel Conversol MAX inverter-chargers. It is wired and tested in the UK before dispatch, so on-site commissioning is quicker and installation errors are reduced for domestic and commercial off-grid or backup power projects.\u003c\/p\u003e\u003ch2\u003eSolar inverter charger with dual parallel inverters\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 22kW single phase off-grid power from two parallel Conversol MAX inverter-chargers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT solar charging\u003c\/strong\u003e, 150A charge current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC distribution\u003c\/strong\u003e, 1000A copper busbar with 70mm² heavy duty battery cabling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar cabling\u003c\/strong\u003e, double-insulated with fused terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Victron battery monitor plus app and Bluetooth monitoring for Android devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup switching\u003c\/strong\u003e, grid and generator compatibility with high speed AC transfer switching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eAll the critical off-grid components sit in one professionally assembled enclosure. The dual parallel Conversol MAX configuration gives 22kW of single phase output with the redundancy that larger installations need. DC distribution runs through the 1000A copper busbar and 70mm² battery cabling for low-resistance, high-current connections.\u003c\/p\u003e\u003cp\u003eThe Victron battery monitor reports state of charge and battery health through the app. Bluetooth and app access let installers and homeowners check battery temperature and system status remotely, which helps avoid battery stress over time.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic and commercial off-grid solar systems, high demand single phase backup installations, remote properties without a grid connection, and generator backup setups needing automatic transfer switching.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid control cabinet, wired and tested\u003c\/li\u003e\n\u003cli\u003e2x Conversol MAX inverter-chargers in parallel configuration\u003c\/li\u003e\n\u003cli\u003eMPPT solar charge controller (150A)\u003c\/li\u003e\n\u003cli\u003eVictron battery monitor\u003c\/li\u003e\n\u003cli\u003e1000A copper busbar DC distribution\u003c\/li\u003e\n\u003cli\u003e70mm² battery cables\u003c\/li\u003e\n\u003cli\u003eDouble-insulated solar cabling with fused terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis cabinet must be installed by a qualified electrician experienced with off-grid and battery storage systems. Battery connections, DC fusing, AC supply, earthing and ventilation must follow IET Wiring Regulations and the manufacturer's installation guidelines. DIY installation of high-current DC or inverter systems is not recommended.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060762767648,"sku":"SP-2248-EM5000","price":5449.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sp-2248-em5000-1.webp?v=1785505314"},{"product_id":"off-grid-solar-kit-1500w-battery","title":"1500W Off-Grid Solar Kit 5x JA Solar 450W Panels 2.5kWh 24V | Voltacon","description":"\u003cp\u003eA complete off-grid solar power kit built around 5 x JA Solar 450W bifacial panels and a 2.5kWh 24V lithium battery, sized for locations without reliable mains power. It suits summer houses, cabins, remote workshops, garages and agricultural buildings, and can run as a true off-grid system or accept grid power as a backup charging source. A wiring diagram and UK technical support are included.\u003c\/p\u003e\u003ch2\u003eOff grid solar power kit features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar array\u003c\/strong\u003e, 5 x JA Solar 450W bifacial panels with black frame, 2.25kW total PV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 2.5kWh 24V lithium ion battery, expandable with further modules\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, all-in-one unit with built-in MPPT solar charger and 230V pure sine wave output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabling\u003c\/strong\u003e, 15 metres of solar DC cable pair ready for connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, DC fuses and isolators for solar and battery, plus AC isolators and consumer unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, complete mounting kit for all 5 solar panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe JA Solar bifacial panels generate power from both the front and rear surfaces, picking up reflected light from the ground to add to total yield. They use PERC half-cut cell technology with multi-busbar construction, which helps in low light and suits the variable UK climate. The all-in-one inverter combines MPPT solar charging and pure sine wave AC output in one unit, so it can run motors, pumps and sensitive electronics cleanly. The battery can be expanded by connecting further modules in parallel as demand grows.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to summer houses, holiday cabins and remote properties, garden offices, garages and agricultural buildings, backup power for essential household loads, and off-grid workshops and outbuildings.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation should be carried out by a qualified installer, with correct cable sizing, fusing and earthing. Any grid backup connection must comply with local wiring regulations. Contact us for technical support before and during installation.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 x JA Solar 450W bifacial panels with black frame\u003c\/li\u003e\n\u003cli\u003e1 x all-in-one solar inverter with MPPT charger and 230V pure sine wave output\u003c\/li\u003e\n\u003cli\u003e1 x 24V 2.5kWh lithium ion battery (expandable)\u003c\/li\u003e\n\u003cli\u003e1 set of 15 metres solar DC cable pair\u003c\/li\u003e\n\u003cli\u003e1 set of DC fuses and DC isolators for solar and battery protection\u003c\/li\u003e\n\u003cli\u003e1 set of AC isolators and consumer unit\u003c\/li\u003e\n\u003cli\u003e1 set complete mounting kit for 5 solar panels\u003c\/li\u003e\n\u003cli\u003e1 x electrical wiring diagram\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060766175520,"sku":"PVKIT1500W","price":2089.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pvkit1500w-1.webp?v=1785505382"},{"product_id":"off-grid-solar-kit-11kw-15kwh-battery","title":"11kW Off-Grid Solar Kit 15kWh Battery | Conversol MAX II","description":"\u003cp\u003eA complete 11kW off-grid solar power kit for remote homes, farms, workshops, commercial premises and Type 2 EV charging stations. The system runs fully independently from the grid, combining 15kWh of Pylontech US5000 battery storage with 10 x JA Solar 450W panels for power day and night. Grid or generator connection is supported as an optional backup charging source where available.\u003c\/p\u003e\u003ch2\u003eOff grid solar kit key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Conversol MAX II 11kW single phase off-grid inverter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 15kWh from 3 x Pylontech US5000, supplied with racks and cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e, 10 x JA Solar 450W monocrystalline bifacial panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup charging\u003c\/strong\u003e, optional grid or generator connection, no export to the grid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant platform included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC protection\u003c\/strong\u003e, Lynx Power In distributor and Mersen 250A fuse disconnector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe system operates independently from the national grid. Solar energy powers connected loads directly, and surplus charges the batteries for use at night or in poor weather. When battery charge runs low and solar generation is insufficient, an optional grid or generator connection tops up the batteries without disrupting supply.\u003c\/p\u003e\u003cp\u003eGrid connection, where used, is passive. The system only draws power to top up the batteries, typically overnight during low-tariff periods. It does not export electricity back to the grid, so there is no need for export licences or DNO approval.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to remote homes and properties without a reliable grid connection, farms and agricultural buildings, workshops and commercial premises off the grid, and Type 2 EV charging stations in off-grid locations. Also fits sites that want solar as the primary source with generator backup.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 x JA Solar 450W monocrystalline bifacial panels\u003c\/li\u003e\n\u003cli\u003e1 x Conversol MAX II 11kW off-grid inverter, up to 12,500W PV input\u003c\/li\u003e\n\u003cli\u003e3 x Pylontech US5000 batteries with racks and cables, 15kWh total\u003c\/li\u003e\n\u003cli\u003eRed and black 6mm² solar DC cables, 25 metres total\u003c\/li\u003e\n\u003cli\u003eMersen fuse disconnector with 250A fuses\u003c\/li\u003e\n\u003cli\u003eBMS communication and battery power cables\u003c\/li\u003e\n\u003cli\u003eLynx Power In distributor\u003c\/li\u003e\n\u003cli\u003eSolar Assistant monitoring platform\u003c\/li\u003e\n\u003cli\u003ePV combiner box with 4 inputs\/outputs, expansion-ready\u003c\/li\u003e\n\u003cli\u003eGround or flat roof mounting kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or solar installer, with correct cable sizing, fusing, earthing and battery communication setup. Grid or generator backup connection must comply with local regulations. Contact us for pre-sales technical support and system sizing.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060768207136,"sku":"11KW15KWH","price":5775.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-11kw15kwh-1.webp?v=1785505850"},{"product_id":"pylontech-battery-cabinet-11kw-24kwh","title":"Voltacon 11kW Off Grid Power Cabinet 24kWh Pylontech Battery BESS","description":"\u003cp\u003eThe Voltacon BESS is a plug and play off grid power cabinet built around an 11kW single phase inverter and integrated Pylontech lithium battery storage. Housed inside an IP65 waterproof industrial cabinet, it brings together the inverter, batteries, a manual changeover switch and Solar Assistant online monitoring in one enclosure, cutting down on wiring and site errors compared with assembling separate components.\u003c\/p\u003e\u003cp\u003eDimensions: 60cm depth, 100cm width, 210cm height.\u003c\/p\u003e\u003ch2\u003ePylontech battery cabinet with 11kW off grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Conversol MAX-II 11kW single phase off grid inverter charger with pure sine wave output and dual MPPT solar charging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 24kWh nominal using 5 x Pylontech US5000C batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsable energy\u003c\/strong\u003e, 22.8kWh based on 95% depth of discharge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 waterproof industrial cabinet for indoor or sheltered outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChangeover\u003c\/strong\u003e, manual changeover switch included for source transfer and maintenance isolation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Solar Assistant online monitoring platform included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eWith the inverter, batteries, switchgear and monitoring already integrated, the installer connects the solar PV input, AC load supply and any backup source as required by the design. This keeps site work to a minimum and gives a tidy, professional cabinet finish rather than a rack of separate parts.\u003c\/p\u003e\u003ch3\u003eBattery chemistry\u003c\/h3\u003e\u003cp\u003eThe Pylontech US5000C battery bank uses Lithium Iron Phosphate (LFP) chemistry, supported by the batteries' own BMS protection.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off grid homes, remote properties, farm buildings, workshops, holiday homes and backup power installations, as well as technical rooms supplying essential services loads.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52061013442848,"sku":"VOLT11KW25BESS","price":9345.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-volt11kw25bess-1.webp?v=1785509033"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/off-grid-solar-kits.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}