{"title":"Off-Grid Inverters","description":"\u003cp\u003eOff-grid inverters convert battery power into usable AC electricity, supplying whatever the connected loads demand up to their rated output, as long as the battery has energy to give. They're the core component in any battery-powered system that isn't tied to the mains.\u003c\/p\u003e\u003cp\u003eSmaller setups can run on DC alone, but most modern installations lean on AC thanks to more efficient inverter technology and better solar and wind integration. This range includes units with built-in MPPT charging, pure sine wave output, and Bluetooth monitoring, in various power and voltage ratings.\u003c\/p\u003e\u003cp\u003eSome systems mix AC and DC to balance efficiency and cost, since DC appliances often use less power but cost more and are harder to source, particularly for refrigeration, lighting and electronics. The inverters here suit anyone building or expanding an off-grid solar or battery system, from small cabins to larger installations.\u003c\/p\u003e","products":[{"product_id":"growatt-5kw-48v-off-grid-inverter","title":"Growatt SPF5000-ES 5kW 48V Off-Grid Inverter Charger | 100A MPPT","description":"\u003cp\u003eThe Growatt SPF5000-ES is a 5kW off-grid solar inverter and battery charger built around a 48V DC system and a 100A MPPT solar charger. PV input can run up to 450V DC, and the inverter can operate without a battery bank connected, drawing directly from solar. Wi-Fi monitoring is included as standard.\u003c\/p\u003e\u003ch2\u003eKey features of this Growatt 5kW off-grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 5kW off-grid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charger\u003c\/strong\u003e, 100A integrated MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input range\u003c\/strong\u003e, MPPT window from 120V to 450V DC, maximum PV input voltage 450V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery independent\u003c\/strong\u003e, runs from solar without a battery bank connected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined supply\u003c\/strong\u003e, draws from solar, battery and grid at once rather than dropping to bypass when reserves are low\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units for 30kW total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScheduled charging\u003c\/strong\u003e, built-in timer for overnight off-peak charging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Wi-Fi module included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe SPF5000-ES runs at higher PV string voltages than many 48V off-grid inverters, with an MPPT window from 120V up to 450V DC. Growatt recommends a minimum of six 300-500W panels wired in series to keep the string within the correct operating range, with a healthy system typically sitting between 300V and 350V.\u003c\/p\u003e\u003cp\u003eRather than switching to bypass mode when the battery is low, the inverter combines whatever solar, battery and grid power is available to keep supplying loads. This reduces reliance on the grid and makes better use of the solar generated during the day. The overnight timer can charge the battery bank from the grid at off-peak rates, so the batteries start each day full ahead of solar generation.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid homes needing higher PV string voltage operation\u003c\/li\u003e\n\u003cli\u003eSystems requiring simultaneous solar, battery and grid supply to loads\u003c\/li\u003e\n\u003cli\u003eOff-grid installations that may expand via parallel units\u003c\/li\u003e\n\u003cli\u003eSystems using overnight scheduled charging on an economy tariff\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or solar installer. PV string voltage must not exceed 450V DC at any time, including cold-weather open-circuit voltage, so this should be calculated for the coldest expected temperature before commissioning. Battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Growatt","offers":[{"title":"Default Title","offer_id":52053853929760,"sku":"002359","price":523.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002359-1.webp?v=1785421062"},{"product_id":"5kw-off-grid-inverter-24v-mppt-charger","title":"5kW Off-Grid Solar Inverter 24V 80A MPPT Charger | Conversol","description":"\u003cp\u003eThe Conversol M-5K-24 combines a 5kW inverter with an 80A MPPT solar charger in a single unit built around a 24V battery bank. It accepts either 120VAC or 230VAC input, so it suits grid, generator or off-grid setups across different regions.\u003c\/p\u003e\u003ch2\u003eOff grid solar inverter charger features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 5kW continuous, 10kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 24V, with 80A MPPT solar charging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT range\u003c\/strong\u003e, 30V to 115VDC, open circuit up to 145VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 2000W PV array\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, 120VAC or 230VAC grid or generator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak efficiency\u003c\/strong\u003e, 98%\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe M-5K-24 suits 24V off-grid systems where a lower battery voltage keeps wiring and equipment costs down. The wide AC input range covers both 230V and 120V connections, and voltage selection can be set for computer loads or general household appliances.\u003c\/p\u003e\u003cp\u003eSolar charging tops out at 80A from the PV array, and AC charging adds a further 60A, giving a combined charge current of 140A. That combination suits larger 24V battery banks that need to recharge quickly.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits 24V off-grid residential systems, cabins and remote properties, agricultural sites, boats, and backup power setups built around a 24V battery bank.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or solar installer. Cable sizing and fusing need to match the 24V high-current operation, and the battery bank must be matched to the inverter's charge settings. Do not exceed the 145VDC PV open circuit voltage limit, and follow all relevant electrical safety regulations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol M-5K-24 off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053854257440,"sku":"90914167","price":787.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914167-1.webp?v=1785421187"},{"product_id":"victron-12-3000-smart-inverter","title":"Victron 12\/3000 230V Smart Inverter | Pure Sine Wave PIN122300000","description":"\u003cp\u003eThe Victron Inverter 12\/3000 230V Smart is a pure sine wave inverter for off-grid and mobile power setups. It converts 12V DC battery power into 230V AC at 3000VA continuous output, suitable for vehicles, boats, off-grid cabins and backup power systems. Bluetooth built into the unit links to the VictronConnect app for setup and monitoring without extra hardware.\u003c\/p\u003e\u003ch2\u003eKey features of the Victron 12\/3000 Smart inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 3000VA at 230V AC from a 12V DC battery bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave, suited to sensitive electronics and motor loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, built-in Bluetooth for VictronConnect on iOS and Android\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, overload and short-circuit protection with automatic shutdown and recovery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery safety\u003c\/strong\u003e, low battery voltage alarm and shutdown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegration\u003c\/strong\u003e, VE.Direct port for connection to Victron system monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis model sits at the top of Victron's 12V inverter range. A 3000W load at 12V draws in excess of 250A from the battery, so cabling, fusing and battery capacity all need to be matched to that discharge rate to avoid excessive voltage drop.\u003c\/p\u003e\u003cp\u003eThe Smart designation refers to the integrated Bluetooth, allowing direct communication with VictronConnect. Installers can adjust low battery shutdown voltage, alarm thresholds and search mode without a separate interface cable, which helps during commissioning in confined vehicle or marine spaces.\u003c\/p\u003e\u003cp\u003eThe VE.Direct port lets the inverter connect into a wider Victron setup, including a Cerbo GX for central monitoring. It is a standalone inverter with no built-in charger; for combined inverter and charger functionality, look at the Victron MultiPlus range instead.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid cabins and remote buildings needing 230V AC from a 12V battery bank\u003c\/li\u003e\n\u003cli\u003eMarine installations without shore power\u003c\/li\u003e\n\u003cli\u003eLarge campervans, motorhomes and HGV sleeper cabs with high AC load needs\u003c\/li\u003e\n\u003cli\u003eBackup power for critical equipment during mains outages\u003c\/li\u003e\n\u003cli\u003eMobile workshops and site vehicles running 230V tools from a battery source\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter 12\/3000 230V Smart unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or accredited installer. DC cable runs must be kept short and rated for sustained currents above 250A, with an appropriately rated DC fuse or breaker fitted close to the battery. The inverter is not grid-connected and does not require G98 or G99 notification, but AC output wiring must comply with BS 7671 regulations. Size the battery bank to support the expected load duration without triggering low-voltage shutdown.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52053863006496,"sku":"PIN122300000","price":625.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin122300000-1.webp?v=1785421512"},{"product_id":"12v-off-grid-inverter-1200w-mppt","title":"Conversol 1200W 12V Off Grid Solar Inverter Dual MPPT 230V","description":"\u003cp\u003eThe Conversol 1.5kVA Duo MPPT is an off-grid inverter and charger built for small 12V battery systems. It combines two independent MPPT solar chargers in one chassis with a 230V pure sine wave output, and weighs just 7kg, making it suited to boats, motorhomes, small cabins and other compact off-grid installations running a 12V system.\u003c\/p\u003e\u003ch2\u003eOff grid solar inverter charger key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 1500VA\/1200W, with 3000VA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 12V, with two independent MPPT solar chargers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 1000W, MPPT range 15V to 80VDC, maximum PV open circuit voltage 100VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge current\u003c\/strong\u003e, 40A solar, 100A combined maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput waveform\u003c\/strong\u003e, pure sine wave 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize and weight\u003c\/strong\u003e, 100 x 272 x 355mm, 7kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating range\u003c\/strong\u003e, -20°C to 55°C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Duo MPPT name refers to the two independent MPPT solar charge controllers inside the unit, which let two separate PV strings or panels be managed on their own for maximum energy harvest. That is useful on boats or vehicles where panels sit at different angles.\u003c\/p\u003e\u003cp\u003eThe unit runs on a 12V battery platform and works with standard lead-acid and sealed battery banks common in marine, caravan and small off-grid setups. Pure sine wave output means it suits all loads, including sensitive electronics and motors.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoats and marine off-grid power systems\u003c\/li\u003e\n\u003cli\u003eMotorhomes, caravans and campervans\u003c\/li\u003e\n\u003cli\u003eSmall off-grid cabins and lodges\u003c\/li\u003e\n\u003cli\u003eRemote monitoring and communications equipment\u003c\/li\u003e\n\u003cli\u003eLightweight backup power for 12V systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol 1.5kVA Duo MPPT off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or solar installer. 12V systems carry high currents, so correct cable sizing and fusing matters for fire safety. Do not exceed the maximum PV open circuit voltage of 100VDC, and set battery charge parameters to match the battery chemistry in use. Follow all applicable electrical safety regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053945614624,"sku":"90914111","price":409.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914111-1.webp?v=1785423821"},{"product_id":"conversol-8kw-inverter-charger-48v","title":"Conversol 8kW MAX-II IP65 Off-Grid Inverter Charger 48V","description":"\u003cp\u003eThe Conversol 8kW MAX-II Waterproof is an off-grid inverter and charger rated IP65, built for installations exposed to dust and moisture. It delivers 8kW continuous output with dual MPPT solar input, and up to six units can run in parallel for larger off-grid systems.\u003c\/p\u003e\u003ch2\u003eKey features of this 48v inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 8kW continuous, 16kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP65 waterproof, suited to outdoor and harsh-environment mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, dual MPPT, up to 8kW total PV input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, 48V bank, up to 150A combined charging current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, USB, RS232, RS485, Wi-Fi, dry contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe IP65 enclosure is what separates this unit from a standard indoor inverter. It can be wall-mounted in plant rooms, outbuildings and exposed locations where a conventional unit would be at risk. The dual MPPT charger accepts strings up to 500VDC open circuit and works across a 90V to 450VDC MPPT range.\u003c\/p\u003e\u003cp\u003ePure sine wave output means it plays well with sensitive loads: variable speed drives, medical equipment, communications gear. With 48V battery input and up to 150A of combined charging, it can support large lead-acid or lithium battery banks.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to outdoor and exposed off-grid installations, agricultural buildings, remote commercial sites and workshops, marine and waterside setups, and backup systems in harsh environments.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol 8kW MAX-II IP65 inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eCommunication cable and accessories\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or accredited solar installer. The IP65 rating applies to the enclosure only, so cable entries need correctly sealed glands to maintain it. Battery cabling, DC fusing and isolators must be sized for 48V high-current operation, and battery voltage and charge settings should be verified before use.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053945745696,"sku":"002135","price":1354.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002135-1.webp?v=1785423843"},{"product_id":"conversol-11kw-off-grid-inverter","title":"Conversol 11kW Ultra-Max Off-Grid Inverter | Dual AC Output 48V","description":"\u003cp\u003eThe Conversol 11kW Ultra-Max is an off-grid inverter and charger built for large residential, commercial and critical backup power systems. Dual AC input and output connections combine with two independent MPPT solar controllers and a combined 12kW of PV input capacity, giving installers a single unit capable of serious off-grid duty with full parallel expansion.\u003c\/p\u003e\u003ch2\u003eKey features of this 11kW off grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 11kW with 22kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual AC architecture\u003c\/strong\u003e, independent inputs and outputs for split or independent load management\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, two independent MPPT solar chargers, up to 12kW total PV input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units for large-scale off-grid systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V with 150A combined charging current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave output for sensitive equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommunication and protection\u003c\/h2\u003e\u003cp\u003eThe Ultra-Max communicates via USB, RS232, RS485, Wi-Fi and Bluetooth, and includes built-in dry contact, GFCI, rapid shutdown and AFCI detection support.\u003c\/p\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eBuilt for demanding off-grid environments, the Ultra-Max pairs a high-output inverter with dual MPPT solar chargers and an AC charger in one enclosure. The dual AC design lets installers wire critical and non-critical loads separately, with precise control over priority and switching behaviour.\u003c\/p\u003e\u003cp\u003eMPPT voltage range runs from 90V to 450VDC, with open circuit voltage up to 500VDC, so the system accepts a wide range of PV string configurations. Battery charging supports both lead-acid and lithium chemistries. Up to six units can be paralleled for installations needing 66kW or more of off-grid capacity.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to large residential off-grid solar systems, commercial and agricultural installations, critical backup power for business continuity, remote sites and telecom infrastructure, and high-capacity battery storage systems.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol 11kW Ultra-Max off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eCommunication cable and accessories\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or accredited solar installer. Battery cabling, fusing and DC isolators need to be correctly sized, and battery bank voltage, capacity and chemistry must match the inverter configuration before commissioning. Parallel operation requires compatible firmware and synchronisation cabling. Do not install without reviewing the full manual and complying with applicable wiring regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053947777312,"sku":"002598","price":1101.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002598-1.webp?v=1785423959"},{"product_id":"conversol-a8-24v-inverter-charger","title":"Conversol A8 3kVA Off-Grid Inverter 24V MPPT Bluetooth","description":"\u003cp\u003eThe Conversol A8 is a 3kVA off-grid inverter and MPPT charger built for 24V battery systems. It combines Bluetooth monitoring, fast AC charging and pure sine wave output, and it can be linked with other units for larger installations.\u003c\/p\u003e\u003ch2\u003eKey features of the Conversol A8 24v inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 3kVA\/3kW, with 6kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery platform\u003c\/strong\u003e, 24V input with integrated MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 1500W, MPPT range 30V to 115VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Bluetooth connectivity via smartphone app\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC charging\u003c\/strong\u003e, up to 80A combined charge current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid\/generator input\u003c\/strong\u003e, accepts 120VAC or 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScalability\u003c\/strong\u003e, parallel operation up to 9 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe A8 is a lightweight unit in the Conversol range, suited to properties, vehicles or installations where 3kW of continuous output is enough and the battery bank runs at 24V. Bluetooth monitoring lets you check status and adjust settings without a wired connection, useful where the unit is mounted somewhere awkward to reach.\u003c\/p\u003e\u003cp\u003eBecause it accepts both 120V and 230V AC supplies, the A8 fits a range of grid or generator setups, and fast charging helps recover battery capacity quickly when solar alone isn't enough. Linking up to 9 units in parallel takes the platform to 27kW for bigger 24V off-grid systems.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid residential systems on 24V battery platforms\u003c\/li\u003e\n\u003cli\u003eBoats, motorhomes and mobile power systems\u003c\/li\u003e\n\u003cli\u003eSmall commercial off-grid installations\u003c\/li\u003e\n\u003cli\u003eCabins, eco-lodges and remote properties\u003c\/li\u003e\n\u003cli\u003eBackup power systems needing parallel scalability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol A8 3kVA off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or solar installer. 24V systems run high currents at relatively low voltage, so correct cable sizing and fusing matters. Do not exceed the specified open circuit PV voltage of 145VDC, and make sure battery type and charge voltage settings match the battery chemistry fitted. Follow all applicable wiring regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053948104992,"sku":"90914122","price":682.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914122-1.webp?v=1785424088"},{"product_id":"solar-water-pump-inverter-11kw-mppt","title":"Aspire NERO 11kW Solar Water Pump Inverter MPPT 800V 3 Phase","description":"\u003cp\u003eThe Aspire NERO is a dedicated 11kW solar water pump inverter driver with an integrated MPPT controller. It runs a three-phase pump motor directly from solar panels without any battery storage, and is built for irrigation, boreholes, farms and remote sites where dependable daylight-hours pumping matters. An auxiliary AC input lets you bring in grid or generator power when solar irradiation isn't enough on its own.\u003c\/p\u003e\u003ch2\u003eKey features of this 3 phase solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-free operation\u003c\/strong\u003e, runs directly from solar panels, no battery storage required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated MPPT\u003c\/strong\u003e, continuously tracks the maximum available solar power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor output\u003c\/strong\u003e, three-phase, for water pumps and irrigation systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax DC input voltage\u003c\/strong\u003e, 800V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax PV array power\u003c\/strong\u003e, 17,600W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start\u003c\/strong\u003e, reduces water hammer and mechanical stress on the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, RS485 port for remote monitoring, with LCD and LED indicators showing real-time data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary AC input\u003c\/strong\u003e, accepts grid or generator supply when sunlight is limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe integrated MPPT pulls the maximum available power from the PV array at whatever irradiance level is present, feeding it straight to the three-phase motor drive. It can start pumping from a fraction of full solar power, so it keeps working in early morning and late afternoon light when a simpler on\/off system would sit idle. If irradiation drops too low to sustain the pump, the auxiliary AC input takes over from a grid connection or diesel generator. Soft start ramps the motor speed up gradually, easing mechanical shock on the pump and pipework.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAgricultural irrigation and livestock watering\u003c\/li\u003e\n\u003cli\u003eBorehole and groundwater extraction on farms and remote sites\u003c\/li\u003e\n\u003cli\u003eIndustrial and municipal water supply pumping\u003c\/li\u003e\n\u003cli\u003eThree-phase pump installations where mains power is unavailable or costly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis unit drives three-phase pump motors and is not a home energy storage or battery inverter. The PV string voltage needs to stay within the inverter's operating window across the expected temperature and irradiance range on site. Professional installation is required for wiring, protection and commissioning, and it must not be connected to a battery bank.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053950300448,"sku":"90914170","price":472.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914170-1.webp?v=1785424292"},{"product_id":"24v-off-grid-inverter-mppt-charger","title":"3.6kW 24V Off Grid Inverter MPPT Charger 80A | Conversol VM","description":"\u003cp\u003eThe Conversol VM 3.6kW is an off-grid inverter and MPPT charger built around a 24V battery bank. It delivers 3600W of continuous output with a 7200VA surge rating, and pairs a 120A MPPT solar charger with support for up to 4000W of PV input, making it a compact option for residential and small commercial off-grid solar systems.\u003c\/p\u003e\u003ch2\u003eKey features of this 24v off grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 3600W with 7200VA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery platform\u003c\/strong\u003e, 24V input with a 120A MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 4000W, MPPT range 120V to 450VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen circuit PV voltage\u003c\/strong\u003e, up to 500VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, LED display for real-time status\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, USB, RS232, RS485, Wi-Fi, dry contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe VM range sits among Conversol's more capable compact off-grid units, joining a high-current MPPT solar charger with a 3.6kW pure sine wave inverter in a wall-mount enclosure. The 120A MPPT charging current helps recharge larger battery banks quickly, and the 120V to 450VDC MPPT window gives installers room to configure the PV array to suit the site.\u003c\/p\u003e\u003cp\u003eAn AC charger adds a further 100A, taking the combined maximum charging current to 120A. That combination suits installations where rapid battery recovery matters. The LED display shows operational status without a separate monitoring device.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential off-grid solar systems on 24V batteries\u003c\/li\u003e\n\u003cli\u003eAgricultural and rural off-grid properties\u003c\/li\u003e\n\u003cli\u003eCabins, workshops and outbuildings\u003c\/li\u003e\n\u003cli\u003eMobile and semi-permanent off-grid installations\u003c\/li\u003e\n\u003cli\u003eBackup power systems with solar charging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol VM 3.6kW off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting should be carried out by a qualified electrician or accredited solar installer. The maximum PV open circuit voltage of 500VDC must not be exceeded, and battery cabling, fusing and DC isolators need to be correctly sized for 24V high-current operation. Confirm battery type and capacity against the charge settings before commissioning, and follow all applicable electrical regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053952200992,"sku":"002192","price":573.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002192-1.webp?v=1785424460"},{"product_id":"48v-8kw-off-grid-inverter-charger","title":"8kW Off-Grid Solar Inverter Charger 48V Dual MPPT | Conversol Max","description":"\u003cp\u003eThe Conversol Max 8kW is a fourth-generation off-grid solar inverter and battery charger delivering 8kW continuous pure sine wave output at 48V. Two independent MPPT chargers cover a 90-450V DC PV input range, and the unit includes built-in Wi-Fi and Bluetooth for remote monitoring, an RGB status indicator, and BMS compatibility with Pylontech and other lithium batteries.\u003c\/p\u003e\u003ch2\u003eKey features of this 48v inverter charger\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 8kW continuous pure sine wave AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT chargers\u003c\/strong\u003e, two independent inputs, 90-450V DC range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, Pylontech US3000C, US5000C (legacy US2000C), and other lithium batteries, plus AGM, GEL, forklift, leisure and flooded lead-acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, built-in Wi-Fi for Android and iOS, plus Bluetooth for local wireless monitoring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl panel\u003c\/strong\u003e, detachable LCD panel that can be mounted remotely\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units, giving 48kW single or three-phase\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt can also run without a battery bank connected, provided solar input is sufficient, and it offers direct 48V DC load connections for items such as fans, lighting or a router, bypassing inverter conversion for those small constant loads. A scheduled AC charging timer lets you set charging windows around an economy tariff.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to large off-grid homes, farms with pumps or refrigeration, and off-grid commercial or light industrial sites. The parallel operation option makes it a practical choice where a system needs to scale or have redundancy built in.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is an 8kW system and must be installed by a qualified electrician or solar installer, with correct cable sizing, fusing, isolators, surge protection and earthing. Battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053955608864,"sku":"90914123","price":1144.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914123-1.webp?v=1785424554"},{"product_id":"48v-off-grid-inverter-5kw-parallel","title":"Conversol V5 Super 5kW Off Grid Inverter 48V 140A MPPT","description":"\u003cp\u003eThe Conversol V5 Super is a 5kW off-grid solar inverter and battery charger built around a 140A MPPT supercharger. It combines Bluetooth monitoring, a removable LCD control panel, and parallel capability for up to 9 units, making it suited to off-grid homes, farms, workshops, and any installation that might need to scale up later.\u003c\/p\u003e\u003ch2\u003eOff grid inverter key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 5kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, 140A MPPT supercharger for faster battery recharge from solar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC, float charge configurable up to 64V for wider battery compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 9 units for single and three-phase configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control panel\u003c\/strong\u003e, removable LCD module, installable up to 20 metres from the inverter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, integrated Bluetooth with the WatchPower Android app, plus USB On-the-Go and RS485 BMS communication for lithium batteries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, farms, and workshops that need high solar charging capacity, and to systems that may need to expand later through parallel operation. Also useful where the control panel needs to sit away from the inverter itself, or where the battery bank calls for a higher float charge voltage than standard. AC or PV input priority is configurable via the control module, with grid or generator backup available when solar and battery cannot meet demand.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eMust be installed by a qualified electrician or solar installer. Battery systems must comply with BS EN 62619 and local building regulations. Float charge voltage has to be set correctly for the battery chemistry in use, as incorrect charging voltages can damage battery cells. This is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053955641632,"sku":"90914114","price":716.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914114-1.webp?v=1785424571"},{"product_id":"solar-inverter-charger-11kw-48v","title":"Conversol 11kW Off-Grid Solar Inverter Charger 48V | Voltacon","description":"\u003cp\u003eThe Conversol Max 11kW is a single-phase off-grid solar inverter charger delivering 11kW continuous pure sine wave AC output and 11kW PV input via dual independent MPPT. It runs on a 48V DC battery bank and works with lead-acid, GEL, lithium-ion and LiFePO4 batteries, with BMS communication ports already fitted for lithium setups.\u003c\/p\u003e\u003ch2\u003e11kW solar inverter charger features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC output\u003c\/strong\u003e, 11kW continuous pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input\u003c\/strong\u003e, 11kW via dual independent MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery voltage\u003c\/strong\u003e, 48V DC, compatible with lead-acid (AGM, GEL, flooded, forklift), lithium-ion and LiFePO4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-independent operation\u003c\/strong\u003e, runs loads direct from solar with 8 to 10 panels in series minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, built-in Wi-Fi for Android and iOS, plus RGB status indicator and USB On-the-Go\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units, giving 66kW single-phase or three-phase configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to large off-grid residential properties, farms, workshops and light commercial or industrial sites where continuous AC demand reaches or exceeds 11kW. It handles agricultural loads such as water pumps, air compressors and refrigeration, and can support off-grid EV charging, heat pumps and air conditioning at 230V.\u003c\/p\u003e\u003ch3\u003eParallel and redundancy\u003c\/h3\u003e\u003cp\u003eParallel hardware and communication ports come pre-installed, so units can be linked to scale output without extra interface hardware. If one unit in a parallel array fails, the rest keep supplying power, so the system has built-in redundancy.\u003c\/p\u003e\u003ch3\u003eBattery-independent mode\u003c\/h3\u003e\u003cp\u003eThe inverter can feed AC loads directly from the solar array without a battery connected, as long as the PV string voltage is high enough. Voltacon recommends a minimum of 8 to 10 panels wired in series for this mode.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis is an 11kW system and must be installed by a qualified electrician or solar installer, with correct cable sizing, busbar ratings, fusing, DC and AC isolators, surge protection and earthing. Battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053960720672,"sku":"002136","price":1260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002136-1.webp?v=1785424930"},{"product_id":"conversol-max-ii-8kw-inverter-charger","title":"8kW Off Grid Inverter Charger 150A MPPT | Conversol Max-II","description":"\u003cp\u003eThe Conversol Max-II 8kW is an off grid inverter charger with dual MPPT solar input and time-controlled charging. It delivers 8kW continuous output with 16kVA surge capacity, pairing a pure sine wave inverter with a solar and AC charger in one unit for off-grid and backup power systems.\u003c\/p\u003e\u003ch2\u003eKey features of this 8kW off grid inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 8kW continuous, 16kVA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, 150A combined MPPT current across dual MPPT inputs, up to 8kW total PV capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime-controlled charging\u003c\/strong\u003e, schedule AC charging from grid or generator during off-peak hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V, compatible with lithium and lead-acid batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, USB, RS232, RS485, Wi-Fi and dry contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Max-II builds on the Conversol off-grid platform with programmable time-charging added. The dual MPPT charger operates between 90V and 450VDC, with an open circuit limit of 500VDC, covering a wide range of PV string arrangements.\u003c\/p\u003e\u003cp\u003eThe 150A MPPT charging current suits large battery banks where fast solar charging matters. Paralleling up to 6 units lets the platform scale to larger off-grid requirements.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, commercial and industrial energy storage, backup power systems with grid or generator input, agricultural and rural off-grid installations, and systems needing programmable charge scheduling.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol Max-II 8kW off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eCommunication cable and accessories\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or accredited solar installer. Correct DC cable sizing, fusing and battery isolators are mandatory at 48V high-current levels. Time-charging functions must be configured correctly to avoid unintended battery overcharge. Read the installation manual in full before commissioning.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053960917280,"sku":"002134","price":1092.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002134-1.webp?v=1785425015"},{"product_id":"off-grid-solar-inverter-5kw-48v","title":"5kW Off Grid Solar Inverter Charger 48V 100A MPPT | Conversol V7","description":"\u003cp\u003eThe Conversol V7 is a 5kW off-grid solar inverter and battery charger built around a 100A MPPT controller with a 120-450V DC PV input range. It switches between grid, solar, and battery supply with zero (0ms) transfer time, so equipment that cannot tolerate a break in power keeps running. Built-in Wi-Fi gives remote monitoring through a mobile app, and the unit accepts lithium-ion batteries via RS485 or CAN-BUS BMS communication.\u003c\/p\u003e\u003ch2\u003eKey features of this off grid solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 5kW (5000W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, 100A MPPT with 120-450V DC PV input range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero transfer time\u003c\/strong\u003e, 0ms switching, suited to servers, NAS devices and ATMs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar array capacity\u003c\/strong\u003e, up to 6,000W across two symmetrical arrays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC, compatible with lithium-ion, LiFePO4, GEL and AGM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 9 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThis is an upgrade on the earlier V5 Super, carrying a higher-amperage MPPT charger and zero millisecond transfer switching. The wider 120-450V DC input range allows longer PV strings, which cuts down on the number of parallel strings and simplifies cabling on larger arrays. The LCD control module is removable and can be wall-mounted away from the inverter itself, while the Wi-Fi app handles monitoring from anywhere with an internet connection. AC or solar input priority is configurable from the LCD.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuits off-grid homes, farms and workshops, and any installation where critical loads such as servers or security systems cannot tolerate an interruption in supply. The high PV input voltage range and parallel capability also make it suitable for larger or scalable off-grid systems.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or solar installer. PV string voltage must not exceed 450V DC under any expected temperature condition, and open-circuit voltage should be checked at minimum expected temperature before commissioning. Battery systems must comply with BS EN 62619 and local building regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961081120,"sku":"90914124","price":509.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914124-1.webp?v=1785425089"},{"product_id":"solar-pump-inverter-7-5kw-mppt","title":"Aspire 7.5kW Solar Water Pump Inverter MPPT 250-780V | 3 Phase","description":"\u003cp\u003eThe Aspire 7.5kW is a solar pump inverter built for three-phase asynchronous induction motors up to 10HP. It runs straight from a PV array with no battery needed, using an integrated MPPT covering a 250-780V DC input range and a maximum PV input of 9,500W. RS485 monitoring, a display screen, and a full protection suite are built in.\u003c\/p\u003e\u003ch2\u003eKey features of this solar pump inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-free operation\u003c\/strong\u003e, draws power directly from solar panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT input range\u003c\/strong\u003e, 250V to 780V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax PV input power\u003c\/strong\u003e, 9,500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor compatibility\u003c\/strong\u003e, three-phase asynchronous induction motors up to 10HP (7.5kW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop\u003c\/strong\u003e, responds to solar irradiation levels without manual input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start\u003c\/strong\u003e, reduces water hammer and inrush current at start-up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eA DSP-based closed-loop control drives the motor smoothly as irradiance changes through the day. The MPPT tracks the array's maximum power point continuously, so pump output adjusts with available sunlight rather than dropping out. Soft start limits mechanical shock on the pipework and motor at start-up, and the unit runs its own self-diagnostics alongside LED status indicators and an onboard display.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to agricultural irrigation, livestock watering, borehole and groundwater extraction, and rural water supply or sanitation projects. It fits any three-phase pump application where mains power is unavailable or not practical to install.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis is a pump inverter for three-phase motors, not a battery or home energy storage inverter. The PV string voltage must stay within the 250-780V MPPT window under all operating conditions, and installation should be carried out by a qualified professional. Do not connect it to a battery bank.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961474336,"sku":"90914169","price":409.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914169-1.webp?v=1785425242"},{"product_id":"off-grid-solar-inverter-charger-48v-5-6kw","title":"5.6kW Off Grid Solar Inverter Charger 48V 120A MPPT | Conversol VM4","description":"\u003cp\u003eThe Conversol VM4 is a 5.6kW pure sine wave off grid solar inverter charger for 48V DC battery banks. It pairs a 120A MPPT solar charger, rated for up to 6kW of PV input, with Wi-Fi and Bluetooth monitoring, a 4.3-inch colour touchscreen and BMS communication for Pylontech, Leoch, Fogstar and other compatible lithium batteries.\u003c\/p\u003e\u003ch2\u003eKey features of this off grid solar inverter charger\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 5.6kW continuous pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V DC, compatible with Pylontech US5000, US3000C, US2000C, Leoch, Fogstar and lead-acid (lithium-ion, LiFePO4, GEL, AGM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, 120A MPPT with 6kW PV input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery independent\u003c\/strong\u003e, can run AC loads directly from solar without a battery bank connected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, built-in Wi-Fi (Android and iOS) and Bluetooth, 4.3-inch colour touchscreen, RGB status ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, RS485, CAN-BUS and RS232 BMS ports\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign details\u003c\/h2\u003e\u003cp\u003eThe VM4 is the fourth generation of the Voltacon off-grid inverter platform, adding a colour touchscreen, Bluetooth and USB On-the-Go support over earlier models. Because it can operate without a connected battery bank, it can supply daytime AC loads from the solar array before a storage system is fully installed. The 120A MPPT charger can also be scheduled to top up batteries from grid or generator power during off-peak tariff periods.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, cabins and workshops, agricultural and rural sites running on Pylontech or lead-acid batteries, and backup power systems combining solar and battery storage. It also fits installations that need solar operation from day one, ahead of battery storage being fitted.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eThis inverter must be installed by a qualified electrician or solar installer. Battery systems need to comply with BS EN 62619 and local building regulations, with correct cable sizing, fusing, isolators and earthing. It is not suitable for DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961736480,"sku":"90914136","price":577.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914136-1.webp?v=1785425315"},{"product_id":"24v-off-grid-inverter-1500w-mppt","title":"1500W Off-Grid Solar Inverter 24V MPPT | Conversol","description":"\u003cp\u003eThe Conversol 1.5kVA is a compact off grid solar inverter with a built-in MPPT charger, built for small autonomous systems running from a 24V battery bank. It outputs 230V pure sine wave power and accepts up to 2000W of solar input, with Bluetooth connectivity for remote monitoring.\u003c\/p\u003e\u003ch2\u003eOff grid solar inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower output\u003c\/strong\u003e, 1500VA\/1500W continuous, 3000VA surge capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 24V with integrated MPPT solar charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 2000W, MPPT range 120VDC to 380VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum PV open circuit voltage\u003c\/strong\u003e, 400VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charge current\u003c\/strong\u003e, 60A maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave 230V output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMonitoring and communication\u003c\/h2\u003e\u003cp\u003eThe unit includes Bluetooth monitoring alongside USB, RS232 and RS485 communication, so it can be checked and configured without needing physical access. The MPPT charger's wide 120V to 380VDC range allows it to work with a range of panel configurations and string lengths.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to small off-grid cabins, holiday homes and lodges, boats and marine power systems, motorhomes and campervans, remote monitoring stations, and backup power for smaller loads. At 8.5kg and 100 x 280 x 390mm it is compact enough for installations where space and weight matter.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConversol 1.5kVA off-grid inverter\/charger unit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or solar installer. Cable sizing and fusing must suit 24V battery operation, the maximum PV open circuit voltage of 400VDC must not be exceeded, and battery charge settings should match the battery chemistry fitted.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053961769248,"sku":"90914166","price":313.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914166-1.webp?v=1785425333"},{"product_id":"victron-12-500-pure-sine-inverter","title":"Victron Inverter 12\/500 230V VE.Direct UK | PIN121501400","description":"\u003cp\u003eThe Victron Inverter 12\/500 230V VE.Direct UK is a 12V DC to 230V AC pure sine wave inverter rated at 500VA continuous output, built for off-grid solar inverter setups, mobile power and backup power where mains supply is not available. The VE.Direct port lets it communicate with compatible Victron monitoring equipment.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 500VA continuous at 230V AC from a 12V DC battery bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave, suitable for sensitive electronics and motor loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, VE.Direct port for connection to Victron GX devices or MPPT displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSocket\u003c\/strong\u003e, UK plug socket configuration included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 4.1 kg, compact enough for van conversions, boats and small off-grid installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, over-temperature, over-load and low battery voltage shutdown built in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe 12\/500 sits at the entry point of Victron's VE.Direct inverter range, sized for loads such as laptops, LED lighting, small power tools and phone chargers. Pure sine wave output means it will run equipment a modified sine wave inverter cannot, including many motor-driven appliances and audio or medical devices.\u003c\/p\u003e\u003cp\u003eVE.Direct sets this apart from a basic inverter. It can be monitored and configured through Victron's GX devices, the VictronConnect app via a VE.Direct to USB or Bluetooth adapter, or folded into a wider Victron system. This is a 12V unit only; check your battery bank voltage before specifying it, as it will not run on 24V or 48V systems.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits van and motorhome conversions, narrowboats and sailing vessels with 12V DC banks, small off-grid cabins and garden buildings with light AC loads, backup power for low-wattage equipment during outages, and remote site power for laptops, lighting and small tools. It can also be integrated into a monitored Victron off-grid system via VE.Direct.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eConnect to a 12V DC battery system with correctly rated DC cabling and fusing; undersized cable at this power level causes voltage drop and can create a fire risk. Installation should be carried out by a qualified electrician or competent person. The unit is not grid-connected and does not require G98 or G99 notification. Any wider solar or battery system should be installed to BS 7671 wiring regulations.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter 12\/500 230V VE.Direct, UK socket version\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060526641440,"sku":"PIN121501400","price":99.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin121501400-1.webp?v=1785492610"},{"product_id":"victron-1600w-12v-inverter-uk","title":"Victron 12\/1600 Pure Sine Wave Inverter 230V VE.Direct | PIN122161400","description":"\u003cp\u003eThe Victron 12\/1600 230V VE.Direct is a pure sine wave inverter that converts 12V DC battery power into 230V AC mains-compatible output. It suits off-grid installations, vehicle conversions, marine systems and backup power setups where a dependable AC supply is needed from a 12V battery bank. A VE.Direct port allows direct communication with compatible Victron monitoring equipment.\u003c\/p\u003e\u003ch2\u003eKey features of the Victron 12\/1600 inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 1600W continuous AC from a 12V DC input, at 230V AC compatible with UK and European appliances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave output, suitable for sensitive electronics, motors and compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, VE.Direct port for connection to Victron GX devices, the VE.Direct Bluetooth Smart dongle, or a compatible MPPT solar charge controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 8.82 kg, compact enough for confined spaces such as vehicle bays or marine cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, built-in over-temperature, overload and low battery voltage shutdown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug\u003c\/strong\u003e, UK configuration included, ready for standard British sockets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eOff-grid cabins and remote buildings running from a 12V battery bank charged by solar or wind. Motorhome, campervan and caravan conversions needing 230V AC from a leisure battery. Marine installations powering 230V AC loads from a 12V DC system. Backup power for critical loads during grid outages, used alongside a separate battery and charger. Mobile work vehicles needing 230V AC for tools without access to shore power.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003ePIN122161400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC input voltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous AC output\u003c\/td\u003e\n\u003ctd\u003e1600W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC output voltage\u003c\/td\u003e\n\u003ctd\u003e230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication port\u003c\/td\u003e\n\u003ctd\u003eVE.Direct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlug configuration\u003c\/td\u003e\n\u003ctd\u003eUK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e8.82 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN\u003c\/td\u003e\n\u003ctd\u003e8719076066361\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter 12\/1600 230V VE.Direct (UK plug configuration)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThis inverter operates at 12V DC and draws high DC currents at full load, so correct cable sizing and fusing on the DC side is essential and must comply with the relevant wiring regulations. Installation should be carried out by a qualified electrician or experienced installer familiar with DC power systems. For off-grid solar installations, connection to the battery bank and any associated solar charge controllers should follow Victron's published system design guidelines. This unit is not grid-tied and does not require G98 or G99 compliance. Ensure adequate ventilation around the unit to prevent thermal shutdown under sustained load.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060751003936,"sku":"PIN122161400","price":206.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin122161400-1.webp?v=1785502983"},{"product_id":"victron-2000va-vebus-inverter","title":"Victron Compact 24\/2000 230V VE.Bus Inverter | CIN242200000","description":"\u003cp\u003eThe Victron Inverter Compact 24\/2000 is a 2000VA pure sine wave inverter built for 24V DC battery systems, converting battery power into a 230V AC supply. It carries the VE.Bus communication interface, letting it link into Victron monitoring and control systems for full visibility over the installation.\u003c\/p\u003e\u003ch2\u003eKey features of this victron inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 2000VA continuous power from a 24V DC input, producing 230V AC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform\u003c\/strong\u003e, pure sine wave, suited to sensitive electronics, motors and compressor-based loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity\u003c\/strong\u003e, VE.Bus interface for integration with Victron GX devices and Color Control GX.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 13 kg, compact enough for space-limited installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration\u003c\/strong\u003e, can be built into larger Victron setups, including parallel and three-phase VE.Bus configurations where supported.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis unit suits off-grid cabins and rural properties running on 24V battery banks, marine installations on 24V DC systems, and van or motorhome conversions needing 230V AC from a 24V leisure battery. It also works in narrowboat electrical systems and as backup power during mains outages, where a 24V bank supplies AC during a cut.\u003c\/p\u003e\u003ch3\u003eSystem connectivity\u003c\/h3\u003e\u003cp\u003eThe VE.Bus interface separates this inverter from simpler units. It communicates with Victron's GX range for remote monitoring, programmable relay functions and battery management integration, which matters for installers building a complete Victron system.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter Compact 24\/2000 230V VE.Bus unit (CIN242200000)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician familiar with DC and AC wiring. DC cable sizing between the battery bank and inverter matters at 24V, since high current draw at full load needs correctly rated, short cable runs with proper fusing. The VE.Bus interface needs a compatible Victron GX device or MK3-USB adapter for setup and monitoring. This inverter is not grid-connected and does not require G98 or G99 notification. For marine use, check compliance with relevant marine electrical standards with a qualified marine electrician.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060751266080,"sku":"CIN242200000","price":566.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-cin242200000-1.webp?v=1785503165"},{"product_id":"off-grid-solar-inverter-11kw-48v","title":"11kW 48V Off-Grid Solar Inverter Dual MPPT | Conversol MAX-III","description":"\u003cp\u003eThe Conversol MAX-III is an 11kW 48V off-grid solar inverter built for single-phase hybrid systems that combine solar, battery and grid or generator power. It outputs 230V pure sine wave power, accepts up to 12kW of solar PV input through dual MPPT charge controllers, and switches automatically between solar, grid and battery sources depending on what is available.\u003c\/p\u003e\u003ch2\u003e48v off-grid solar inverter with dual AC in\/out\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous output\u003c\/strong\u003e, 11kW at 230V pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery input\u003c\/strong\u003e, 48V, compatible with lithium and lead-acid battery types\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar PV input\u003c\/strong\u003e, up to 12kW via dual MPPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual AC input\u003c\/strong\u003e, grid and generator supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual AC output\u003c\/strong\u003e, separates critical and non-critical loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel operation\u003c\/strong\u003e, up to 6 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cp\u003eA built-in CT sensor tracks grid import and export in real time so the inverter can prioritise self-consumption before drawing from the grid. A grid-support function lets the unit supplement a limited grid supply during peak periods without needing a utility upgrade. Output 1 stays live at all times, while Output 2 can be managed separately, useful for controlling appliances like water heaters or EV chargers away from the critical circuit.\u003c\/p\u003e\u003cp\u003eThe front cover slides open for tool-free access to all DC and AC terminals, which are clearly labelled to reduce wiring errors during installation or maintenance. Integrated AC and DC breakers plus a PV disconnect come fitted as standard, along with a reinforced wall-mount bracket. The unit has 12 user-configurable settings on a single screen with LED status indicators. Warranty is 2 years.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid homes, farms and remote buildings, hybrid systems combining solar, battery and grid or generator backup, sites with limited grid import capacity, and larger installations where up to 6 units are paralleled for extra capacity.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified installer. Battery type and charging parameters need setting before commissioning. For grid-connected use in the UK, comply with G98 or G99 regulations, and ensure all DC wiring, fusing and earthing meet current wiring regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060760277280,"sku":"002824","price":1260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002824-1.webp?v=1785504640"},{"product_id":"victron-12-2000-inverter-compact","title":"Victron Inverter Compact 12\/2000 230V VE.Bus | CIN122200000","description":"\u003cp\u003eThe Victron Inverter Compact 12\/2000 is a 2000VA pure sine wave inverter built for 12V DC systems, producing 230V AC output through a VE.Bus interface. It's designed for off-grid, marine and vehicle installations where panel space is tight but reliable AC power still matters.\u003c\/p\u003e\u003ch2\u003eVictron inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 2000VA continuous, pure sine wave, from a 12V DC battery bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVE.Bus port\u003c\/strong\u003e, connects to Victron Multi-unit systems, GX devices and remote panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact chassis\u003c\/strong\u003e, a smaller footprint than Victron's standard inverter models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurable via VEConfigure\u003c\/strong\u003e, set load-dependent shutdown, battery protection thresholds and other parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in protection\u003c\/strong\u003e, overload, over-temperature, short circuit and low battery voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Compact 12\/2000 shares the VE.Bus interface used on the MultiPlus and Quattro ranges, so it can be monitored through a Cerbo GX, Color Control or Digital Multi Control panel without needing a full Multi unit.\u003c\/p\u003e\u003cp\u003eRunning from a 12V lithium or AGM bank suits narrowboats, motorhomes, off-grid cabins and vehicle conversions. At 2000VA it will carry lighting circuits, small power tools, laptops, televisions and kitchen appliances, provided the battery bank can sustain the discharge. Cabling and battery sizing need to account for the current draw at 12V, which climbs quickly under load.\u003c\/p\u003e\u003cp\u003eVEConfigure lets you set low battery shutdown and restart voltages, useful for lithium systems needing exact cut-off points. This unit has no built-in charger, so it works purely as an inverter. Anyone needing charging as well should look at the MultiPlus range instead.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNarrowboat and canal boat AC systems running from 12V batteries.\u003c\/li\u003e\n\u003cli\u003eMotorhome and campervan conversions needing 230V AC from a 12V supply.\u003c\/li\u003e\n\u003cli\u003eOff-grid cabins and remote sites with 12V storage.\u003c\/li\u003e\n\u003cli\u003eCommercial vehicle conversions powering tools or equipment.\u003c\/li\u003e\n\u003cli\u003eStandalone backup power where a separate charger isn't wanted.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eVictron Inverter Compact 12\/2000 230V VE.Bus unit\u003c\/li\u003e\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060762112288,"sku":"CIN122200000","price":498.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-cin122200000-1.webp?v=1785505069"},{"product_id":"victron-12-1200-inverter-230v","title":"Victron 12\/1200 Inverter 230V VE.Direct UK | PIN122121410","description":"\u003cp\u003eThe Victron Inverter 12\/1200 230V VE.Direct is a pure sine wave inverter that converts 12V DC battery power into 230V AC mains voltage, rated for 1200W continuous output. It suits off-grid installations, vehicle conversions, marine setups and backup power systems where a clean AC supply is needed from a 12V battery bank. The VE.Direct port connects to compatible Victron monitoring devices and displays.\u003c\/p\u003e\u003ch2\u003eVictron 12\/1200 inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 1200W continuous at 230V AC from a 12V DC input, pure sine wave.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, VE.Direct port for Victron displays, Color Control GX and other compatible hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSocket\u003c\/strong\u003e, UK plug socket configuration, ready for direct use without adaptors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e, 7.64 kg, suited to vans, boats, cabins and off-grid enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, low battery voltage shutdown, high battery voltage, overload and over-temperature protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere it fits in the range\u003c\/h2\u003e\u003cp\u003eThe 12\/1200 sits in Victron's VE.Direct inverter range, between the basic Phoenix range and the full MultiPlus hybrid inverter\/charger series. The VE.Direct port allows monitoring and control via a Victron GX device, a BMV battery monitor, or the VictronConnect app through a VE.Direct to USB or Bluetooth dongle. For a monitored off-grid or backup system on a budget, that integration matters.\u003c\/p\u003e\u003cp\u003eAt 1200W continuous output the unit powers lighting circuits, small appliances, power tools and similar loads from a 12V battery bank. It will not sustain high-draw loads such as electric kettles or large compressors for extended periods, so load planning matters. The pure sine wave output suits inductive loads such as motors and equipment needing a clean AC waveform.\u003c\/p\u003e\u003cp\u003eThis is a DC to AC inverter only, with no built-in battery charger or solar charge controller. It is intended to work alongside a suitable charger or solar input as part of a wider system.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOff-grid cabins and outbuildings powered by a 12V battery bank with solar or generator charging.\u003c\/li\u003e\n\u003cli\u003eCampervan and motorhome conversions needing 230V AC from the leisure battery.\u003c\/li\u003e\n\u003cli\u003eMarine installations requiring 230V AC from a 12V DC battery system.\u003c\/li\u003e\n\u003cli\u003eBackup power for small offices, workshops or domestic circuits during outages.\u003c\/li\u003e\n\u003cli\u003eMobile work vehicles needing 230V AC for tools from a 12V auxiliary battery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eConnect this inverter to a 12V DC battery bank with appropriately rated DC cabling and fusing. High DC currents are present at 1200W output, and incorrect cabling or fusing is a fire risk, so installation should be carried out by a qualified electrician or experienced system integrator. The AC output does not carry G98 or G99 grid-tie approval and is not intended for connection to the public grid. Allow adequate ventilation around the unit to prevent thermal shutdown under sustained load.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52060768108832,"sku":"PIN122121410","price":178.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pin122121410-1.webp?v=1785505764"},{"product_id":"11kw-off-grid-inverter-mppt-charger","title":"Conversol Max-II 11kW Off Grid Inverter MPPT Charger 48V Twin Output","description":"\u003cp\u003eThe Conversol Max-II combines an 11kW off-grid inverter, MPPT solar charger and battery charger in one unit. Its dual MPPT design offers 5500W per controller with 27A PV input current, so it copes with smaller string configurations as well as larger 660W modules. Twin AC outputs, built-in Wi-Fi and broad lithium battery compatibility make it suited to demanding off-grid and hybrid residential or light commercial systems.\u003c\/p\u003e\u003ch2\u003e11kW off grid inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 11000VA \/ 11000W pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual MPPT solar charger\u003c\/strong\u003e, 5500W per tracker, 500VDC max PV input, 90 to 450VDC MPPT range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge current\u003c\/strong\u003e, up to 150A solar and 150A AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin AC outputs\u003c\/strong\u003e, for smart load management across separate circuits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, Pylontech, WECO and Soltaro lithium batteries (LIB, LIC, PYL protocols), plus AGM and lead-acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, built-in Wi-Fi, 5-inch colour LCD touchscreen, RS485, CAN-BUS and RS232 BMS communication ports\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Max-II runs at 48VDC battery voltage with a 54VDC floating charge voltage. In inverter mode it reaches 93% peak efficiency with a 16,000VA surge capacity. Transfer time is 15ms for PC-grade loads and 20ms for home appliances, keeping supply steady during mains outages or generator switching.\u003c\/p\u003e\u003cp\u003eTwin outputs let an installer assign loads to different circuits, giving priority power to critical equipment while secondary loads are managed separately. That matters in off-grid systems where battery capacity has to be watched closely. A built-in anti-dust kit protects internal components where airborne particles are a concern, cutting down on manual cleaning.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential and light commercial off-grid solar power systems\u003c\/li\u003e\n\u003cli\u003eHybrid installations with lithium or lead-acid battery storage\u003c\/li\u003e\n\u003cli\u003eBackup power for homes and small businesses\u003c\/li\u003e\n\u003cli\u003eThree phase systems when several units are run in parallel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eThis inverter must be installed by a qualified electrician or solar installer. Battery wiring, DC fusing, earthing and ventilation must comply with the manufacturer's guidelines and IET Wiring Regulations. Lithium battery BMS communication must be correctly configured before operation. Do not attempt DIY installation of inverter or battery systems.\u003c\/p\u003e\u003cp\u003eParallel operation is supported for up to 6 units, and the unit carries CE certification.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060768174368,"sku":"002691","price":1155.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002691-1.webp?v=1785505820"},{"product_id":"5kw-48v-off-grid-solar-inverter-conversol-premium-vm-ii","title":"5kW 48V Off-Grid Solar Inverter | Conversol Premium VM-II","description":"\u003cp\u003eThe Conversol Premium VM-II is a 5kW off-grid inverter and solar charger built for 48V lithium and lead-acid battery banks. It combines a pure sine wave inverter with an MPPT solar charge controller, giving a single unit for charging, inverting and managing a residential off-grid or hybrid battery system. It works with Pylontech US2000C, US5000C and active cell balancing lithium batteries.\u003c\/p\u003e\u003ch2\u003eKey features of this 5kw solar inverter off grid\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 5000VA \/ 5000W pure sine wave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar charging\u003c\/strong\u003e, MPPT charger with 500VDC max PV input and 4000W max PV power, MPPT voltage range 60 to 115V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge current\u003c\/strong\u003e, up to 100A from solar and 100A from AC, each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery compatibility\u003c\/strong\u003e, Pylontech US2000C, US5000C and active cell balancing lithium batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransfer time\u003c\/strong\u003e, 0ms in inverter mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, wall-mounted compact design with anti-dust filter and built-in BMS communication port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eBattery voltage runs at 48VDC, with a floating charge of 54VDC and overcharge protection triggered at 63VDC. Efficiency is 93% in line mode and 90% in battery mode. The selectable input range of 110 to 280VAC covers both utility mains and generator supplies, and the anti-dust filter helps keep cooling reliable where dust is a factor.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential off-grid solar systems and hybrid solar plus battery storage installations. It also serves as backup power for homes and small commercial premises, particularly where the battery bank is Pylontech or another active cell balancing lithium system.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis inverter must be installed by a qualified electrician or solar installer. DC wiring, fusing, earthing and battery connections need to follow IET Wiring Regulations and the battery manufacturer's guidelines. It is not intended for DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060768305440,"sku":"90914328","price":523.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914328-1.webp?v=1785505916"},{"product_id":"refurbished-conversol-5kw-inverter-charger","title":"Refurbished Conversol 5kW Off Grid Solar Inverter Charger MPPT WiFi | V7-5000-48","description":"\u003cp\u003eThis is a used and refurbished Conversol 5kW V7 solar inverter charger, repaired and tested by our technical team and supplied with a 6 month warranty. It pairs an off grid solar inverter charger with a built-in 100A MPPT solar charger, suited to larger PV arrays and battery charging for homes, workshops and backup power systems.\u003c\/p\u003e\u003ch2\u003eOff grid solar inverter charger features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 5kW inverter charger for off-grid and backup power systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT solar charger\u003c\/strong\u003e, 100A MPPT charger with a maximum PV input power of 6000W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV input voltage range\u003c\/strong\u003e, 120V to 450V DC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero transfer time\u003c\/strong\u003e, for sensitive loads such as computers, servers and security systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in WiFi\u003c\/strong\u003e, for monitoring and system control, with an LCD display for configurable settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMS communication\u003c\/strong\u003e, RS485 or CAN-BUS support, with parallel operation for up to 9 units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCondition and warranty\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUsed and refurbished item, fully repaired and tested before dispatch.\u003c\/li\u003e\n\u003cli\u003eMay show small cosmetic marks from previous use.\u003c\/li\u003e\n\u003cli\u003eSupplied with a 6 month warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to off-grid solar systems, battery backup systems, and installations in homes, cabins, workshops and small commercial sites. The wide PV voltage range helps reduce cable runs, and the zero transfer time suits sensitive electrical loads.\u003c\/p\u003e\u003ch2\u003eDimensions and weight\u003c\/h2\u003e\u003cp\u003eThe unit measures 135.5 x 300 x 500 mm and weighs 15kg net.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x Refurbished Conversol 5kW V7 solar inverter charger\u003c\/li\u003e\n\u003cli\u003e6 month warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation note\u003c\/h2\u003e\u003cp\u003eThis is a refurbished product, not new stock. It has been repaired and tested for correct operation before dispatch, though cosmetic condition may vary. Installation should be carried out by a qualified solar electrician, following the manual and local electrical regulations.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52061010657568,"sku":"90914124-USED","price":409.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-90914124-used-1.webp?v=1785508586"},{"product_id":"48v-hybrid-solar-inverter-12kw","title":"Axpert MAX III 12kW Hybrid Solar Inverter 48V Dual MPPT | Conversol","description":"\u003cp\u003eThe Conversol Axpert MAX III 12kW is a third-generation 48V single-phase hybrid inverter built for off-grid and grid-support solar systems. It outputs pure sine wave power at 230V and accepts up to 18kW of solar input across dual MPPT trackers, so installers can size larger arrays without adding a second inverter.\u003c\/p\u003e\u003ch2\u003eKey features of this hybrid solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power\u003c\/strong\u003e, 12000VA \/ 12000W with 24000VA surge capacity for demanding loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery voltage\u003c\/strong\u003e, 48VDC with a maximum charge current of 200A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, up to 18000W PV array power, max. 12000W per tracker, MPPT range 90-450VDC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, pure sine wave, dual AC inputs and dual AC outputs for flexible load management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, integrated DC breaker, AC breaker and PV DC switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, USB, RS232, RS485, WiFi and dry-contact.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and operation\u003c\/h2\u003e\u003cp\u003eA sliding front cover exposes all terminals without tools, and the layout is clearly labelled to speed up wiring. Twelve settings are displayed on a single screen with LED indicators giving a status check at a glance. A wall mount bracket is included to simplify fitting.\u003c\/p\u003e\u003ch3\u003eSmart hybrid and off-grid operation\u003c\/h3\u003e\u003cp\u003eThe inverter can be set to hybrid or off-grid operation. A built-in CT sensor supports self-consumption by prioritising stored or generated power before drawing from or exporting to the grid, and grid support allows higher output without needing a utility upgrade.\u003c\/p\u003e\u003ch3\u003eExpansion and warranty\u003c\/h3\u003e\u003cp\u003eUp to six units can be paralleled for greater system capacity as needs grow. The Conversol Axpert MAX III 12kW carries a two-year warranty.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52095395856672,"sku":"002825","price":1417.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002825-1.webp?v=1785748499"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/off-grid-solar-inverters.oembed?page=2","provider":"LED \u0026 Solar","version":"1.0","type":"link"}