{"title":"Strip Lights","description":"\u003cp\u003eLED strip lights are flexible circuit boards fitted with rows of LEDs, used for everything from under-cabinet lighting to decorative accents and coving. Because the strip is thin and cuttable at set points, it fits into places rigid fittings can't reach.\u003c\/p\u003e\u003cp\u003eThis category covers the strips themselves along with the power supplies and drivers needed to run them, including constant voltage and dimmable options in 12V and 24V. Picking the right driver wattage for your strip length is as important as the strip itself, so power supplies are grouped alongside the lighting for easier matching.\u003c\/p\u003e\u003cp\u003eTrade installers and DIY buyers both use this range, whether wiring a single shelf or a full room lighting scheme. If you need help specifying a system, our team can talk through the options by phone or email.\u003c\/p\u003e","products":[{"product_id":"led-strip-motion-sensor-kit","title":"LED Strip Light Kit with Motion Sensor 12V Warm White | Twin Pack","description":"\u003cp\u003eThis twin pack LED strip light kit combines two 1.2m warm white strips with infrared motion sensors for hands-free lighting under beds, in cupboards or along stairs. Each strip switches on automatically when movement is detected and turns off again after an adjustable time delay, so there's no need to reach for a switch in the dark.\u003c\/p\u003e\u003ch2\u003eKey features of this led strip light motion sensor kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIR motion sensor\u003c\/strong\u003e, turns the strip on when movement is detected and off after the set delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotocell sensor\u003c\/strong\u003e, keeps the strip off during daylight so it only lights up at night\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimmable warm white\u003c\/strong\u003e, 3000K colour temperature for a soft ambient glow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable on-time\u003c\/strong\u003e, from a few seconds up to 3 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong adhesive tape\u003c\/strong\u003e, fits to beds, cabinets, counters, shelves and cupboards without tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotion sensor range\u003c\/strong\u003e, detects movement from 0 to 3.5m\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuitable for double beds, kitchen cupboards, hallway furniture, closets and workbenches. The 1.2m strip and 1m cable to the sensor give enough reach to run lighting along a bed frame or under a cabinet, with the sensor to strip cable extending a further 1.2m.\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWattage: 7.5W\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eInput voltage: 100-240V AC\u003c\/li\u003e\n\u003cli\u003eLifespan: 35,000 hours\u003c\/li\u003e\n\u003cli\u003eColour temperature: 3000K (warm white)\u003c\/li\u003e\n\u003cli\u003eAdapter to sensor cable: 1m\u003c\/li\u003e\n\u003cli\u003eSensor to LED strip cable: 1.2m\u003c\/li\u003e\n\u003cli\u003eLED strip length: 1.2m\u003c\/li\u003e\n\u003cli\u003eMotion sensor distance: 0-3.5m\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 x LED strips\u003c\/li\u003e\n\u003cli\u003e1 x power supply\u003c\/li\u003e\n\u003cli\u003e2 x motion sensor controllers\u003c\/li\u003e\n\u003cli\u003e2 x adhesive tapes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52053854060832,"sku":"000032","price":35.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-000032-1.webp?v=1785421131"},{"product_id":"led-strip-controller-zigbee-2-4g","title":"Mi-Light 2 in 1 LED Controller Zigbee 3.0 and 2.4G | FUT035Z+","description":"\u003cp\u003eThe Mi-Light FUT035Z+ is a 2 in 1 LED strip controller that switches between single colour and dual white output with one button press. It runs on Zigbee 3.0 wireless protocol alongside 2.4GHz RF remote control, giving you a choice of control methods depending on your setup.\u003c\/p\u003e\u003ch2\u003eKey features of this led strip controller\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput modes\u003c\/strong\u003e, single colour or dual white, switched via one button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZigbee 3.0 protocol\u003c\/strong\u003e, control distance of 100m in open areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.4G RF remote\u003c\/strong\u003e, compatible with Mi-Light \/ MiBoxer 2.4GHz series remotes, 30m control distance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp control\u003c\/strong\u003e, works with the Tuya Smart app when paired with a Zigbee 3.0 gateway (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable output\u003c\/strong\u003e, brightness and colour temperature can be dimmed and tuned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice control\u003c\/strong\u003e, supports Amazon Alexa and Google Assistant through a Zigbee 3.0 gateway\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSignal transmitting\u003c\/h2\u003e\u003cp\u003eOne fixture can relay the remote control signal on to another fixture within 30m. As long as each fixture in the chain is within 30m of the next, the overall remote control range has no fixed limit.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to single colour or dual white LED strip installations where you want flexibility between app control, a Zigbee gateway, and a straightforward 2.4G remote. Useful where a smart home hub is already in place or planned, since the gateway unlocks group control, timing, and music rhythm functions alongside voice control.\u003c\/p\u003e\u003ch3\u003eGateway requirement\u003c\/h3\u003e\u003cp\u003eA Zigbee 3.0 gateway is required for app and voice control features. This is not included and must be purchased separately.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"Default Title","offer_id":52096607879456,"sku":"601202","price":25.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601202-1.webp?v=1785761605"},{"product_id":"dc-power-plug-jack-connector","title":"12V 24V DC Power Plug Jack Male \u0026 Female Connector 2.1mm | Ledison","description":"\u003cp\u003eMale and female DC connectors for LED strips with twin-cable output, designed to link a DC power supply to an LED board. Each connector is fitted with small screw terminals for a tool-light fit.\u003c\/p\u003e\u003ch2\u003e12v dc jack plug with screw-down fitting\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type\u003c\/strong\u003e, male and female DC-tip connectors, 2.1mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting method\u003c\/strong\u003e, screw-down terminals, no crimping tool required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower range\u003c\/strong\u003e, 12V to 36V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale connector size\u003c\/strong\u003e, 5.5mm x 2.1mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale connector size\u003c\/strong\u003e, 38 x 13 x 11mm, internal diameter 2.1mm, external diameter 5.5mm, overall size 38.4 x 14.8 x 11.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, high-conductivity metal contacts with a plastic outer housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse this pair to join twin-cable DC power to an existing 2.1mm DC-tip input, whether on an LED strip, a CCTV camera or another common DC-only device. The screw posts let you fit figure-8 cable directly with just a small screwdriver, which suits installers who need a quick connection on site without special tooling.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eWorks with common 2.1mm DC connector inputs found on CCTV cameras and LED strip power supplies, and with other DC or AC camera setups that use the same tip size.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096610173216,"sku":"BK-DMW-01+BK-DFW-01","price":1.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bk-dmw-01-bk-dfw-01-1.webp?v=1785761687"},{"product_id":"rgb-led-strip-light-usb-remote","title":"RGB LED Strip Light 6.5ft USB Powered with Remote | Lumen8","description":"\u003cp\u003eAdd colour-changing light to a TV, desk or cabinet with this Lumen8 RGB strip. It runs from any 5V USB port and comes with a remote control for adjusting colour and pattern on the fly.\u003c\/p\u003e\u003ch2\u003eKey features of this led strip lights set\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, runs from any 5V standard USB port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 6.5ft strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours\u003c\/strong\u003e, 16 colour options plus 4 mood light settings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote range\u003c\/strong\u003e, works from up to 26' away\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting\u003c\/strong\u003e, 3M self-adhesive backing for a peel-and-stick install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe flexible strip suits backlighting for TVs, monitors, stereo systems and cabinets. Peel the backing off and press onto any flat, clean surface, then plug into a USB port to power it.\u003c\/p\u003e\u003ch3\u003eUsing the remote\u003c\/h3\u003e\u003cp\u003eThe included remote lets you switch between the 16 colours and 4 mood settings, so you can set a static colour or a changing pattern to suit the room.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096611287328,"sku":"2392943090","price":31.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-2392943090-1.webp?v=1785761915"},{"product_id":"rgbww-led-strip-light-24v-5m","title":"LED Strip Light IP65 RGBWW 5 in 1 24V 5m Roll | Ledison","description":"\u003cp\u003eThis RGBWW LED strip combines RGB colour mixing with warm and cool white in a single 5 in 1 chip, giving you full colour control and adjustable white tones from one tape. It is IP65 rated and encased in a silicone extrusion, so it copes with dust, moisture and outdoor use. Supplied as a 5m roll running on 24V DC.\u003c\/p\u003e\u003ch2\u003eKey features of this led strip light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED chip\u003c\/strong\u003e, SMD5050, 5 in 1 RGB plus warm white and cool white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED density\u003c\/strong\u003e, 60 LEDs per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproofing\u003c\/strong\u003e, IP65, silicone extrusion casing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour rendering\u003c\/strong\u003e, CRI 85+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption\u003c\/strong\u003e, 18W per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl\u003c\/strong\u003e, 5-pin input, dimmable, works with RGBWW\/CW controllers including Mi-Light and Skydance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe mix of RGB colour and adjustable white output suits accent lighting, task lighting and mood lighting alike, indoors or outside. Millions of colours are possible through RGB mixing, alongside a white range running from warm to cool daylight tones.\u003c\/p\u003e\u003ch3\u003ePower and mounting\u003c\/h3\u003e\u003cp\u003eThe strip runs on 24V DC and needs a constant voltage supply; a 100 to 120W supply is recommended to run a full 5m roll. The PCB is 12mm wide, and the manufacturer recommends 3 mounting clips per metre for a secure fit.\u003c\/p\u003e\u003ch2\u003eController compatibility\u003c\/h2\u003e\u003cp\u003eThe 5-pin connection is designed to pair with RGBWW\/CW controllers, including those from Mi-Light and Skydance, for stable colour control and smooth dimming.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096613482784,"sku":"601026","price":59.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601026-1.webp?v=1785762230"},{"product_id":"rgb-cct-led-remote-control","title":"6 Zone RGB CCT LED Remote Control | Mi-Light FUT089S","description":"\u003cp\u003eThe Mi-Light FUT089S is an RF remote control for LED strips, working without Wi-Fi and communicating over 2.4G radio frequency. It controls up to 8 RGB, CCT and dimmable LED devices across 6 zones from a single handset, and pairs with Mi-Light and MiBoxer 2.4G series receivers.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless technology\u003c\/strong\u003e, 2.4G RF, no Wi-Fi required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl distance\u003c\/strong\u003e, up to 30m, extendable by signal re-transmission\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour range\u003c\/strong\u003e, 16 million colours via 5-in-1 LED chip support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustments\u003c\/strong\u003e, brightness, colour temperature and saturation, per zone or all zones together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory\u003c\/strong\u003e, saves 4 favourite colours or a dynamic mode (lamp firmware 2.0 or higher)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, runs on two AAA batteries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe FUT089S suits installations using any of the following lighting types:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMONO, single colour\u003c\/li\u003e\n\u003cli\u003eCCT, variable colour temperature\u003c\/li\u003e\n\u003cli\u003eRGB, multicolour\u003c\/li\u003e\n\u003cli\u003eRGB+W, multicolour with extra white\u003c\/li\u003e\n\u003cli\u003eRGB+CCT, multicolour with variable colour temperature\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eZone and dynamic controls\u003c\/h3\u003e\u003cp\u003eEach of the 6 zones can be switched, dimmed and coloured individually or all together. Dynamic programs are available, with adjustable playback speed, alongside standard on\/off and monochromatic colour selection.\u003c\/p\u003e\u003ch2\u003eCompatible receivers\u003c\/h2\u003e\u003cp\u003eThe remote works with the following Mi-Light and related models: FUT043, FUT044, FUT045, FUT037, FUT039, FUT036, LS2, LS2S, WLS, PX1, FUT012, FUT013, FUT014, FUT092.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMi-Light FUT089S remote control\u003c\/li\u003e\n\u003cli\u003eWall holder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mi-Light","offers":[{"title":"Default Title","offer_id":52096614367520,"sku":"FUT089S","price":16.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-fut089s-1.webp?v=1785762302"},{"product_id":"led-driver-24v-60w-ip67-glacial","title":"LED Driver 24V 60W IP67 Constant Voltage | Glacial GP‐LS60P‐24CA","description":"\u003cp\u003eThe Glacial GP‐LS60P‐24CA is a 24V constant voltage LED driver rated at 60W, built with an aluminium housing potted in heat-conductive silicone. The sealed IP67 construction lets it work in dusty, oily, high-vibration and humid conditions where an unprotected driver would fail.\u003c\/p\u003e\u003ch2\u003eKey features of this 24v led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, active PFC rated at 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, free air convection, no fan required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, less than 0.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, OVP, OCP, SCP and OTP built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, universal 90~305V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e, ErP EU_1194_2012 Stage 3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperating mode\u003c\/h2\u003e\u003cp\u003eThe GP‐LS60P Series runs in constant current mode, with short circuit protection in hiccup mode that recovers once the fault clears. Over voltage and over temperature faults trigger latch mode, requiring a re-power to reset. Set-up time is under 0.5 seconds at 230VAC.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuitable as a power source for LED strips and moving sign installations, indoors or in exposed locations where the IP67 rating and wide temperature tolerance matter.\u003c\/p\u003e\u003ch2\u003eSafety and EMC\u003c\/h2\u003e\u003cp\u003eCertified to UL8750, EN61347-1 and EN61347-2-13, with EMI conduction and radiation compliant to EN55015 and FCC Part 15. Harmonic current output meets EN61000-3-2 Class C and EN61000-3-3, and EMS immunity is compliant to the EN61000-4 series and EN61547.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe unit measures 199.3 x 49.5 x 40.5mm and weighs 762g.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096614498592,"sku":"900408","price":24.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-900408-1.webp?v=1785762317"},{"product_id":"rgbww-4-zone-remote-skydance","title":"Mi-Light RGBWW 4 Zone Remote Control | Skydance FUT092","description":"\u003cp\u003eA 4-zone RF remote for MiLight RGB-CCT smart LED lights, built with a transparent crystal front case and a night luminous frame so it stays visible in the dark. It runs on 2.4GHz GFSK transmission for low power use and long-distance control that will not interfere with other electronics.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission\u003c\/strong\u003e, 2.4G RF technology with GFSK control method\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZones\u003c\/strong\u003e, 4-zone control, with an unlimited number of LED bulbs per zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, controls LED light bulbs, LED downlights, LED rail tracklights and LED controllers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment\u003c\/strong\u003e, dimming, colour temperature adjustment, colour change and saturation control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest suited to\u003c\/strong\u003e, RGB, warm white and cool white strip lights using 5 in 1 chips\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it to group and control several LED fittings across four separate zones from one handset, ideal for homes or installations running multiple MiLight RGB-CCT products from a single point. The quick, strong link to MI-Light controllers means colour, saturation and white tone can all be adjusted without touching a switch.\u003c\/p\u003e\u003ch3\u003eDesign\u003c\/h3\u003e\u003cp\u003eThe crystal front case and night luminous frame make the remote easy to find and read in low light, without changing how it operates.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"Default Title","offer_id":52096615219488,"sku":"601047","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-fut092-1.webp?v=1785762441"},{"product_id":"led-strip-t-connector-10mm-2pin","title":"T-Shape LED Strip Connector 10mm 2 PIN PCB | Ledison","description":"\u003cp\u003eThis T-shape connector joins 10mm wide single colour LED strips without any soldering. It has two PIN terminals marked positive and negative, and a standard plier applies the gentle force needed to seat the connection.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e, 10mm PCB for 2 way LED strips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply compatibility\u003c\/strong\u003e, approved for 12V, 24V and 48V LED power supplies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip compatibility\u003c\/strong\u003e, works with SMD2835, SMD5050 and SMD3528\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage\u003c\/strong\u003e, DC 300V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current\u003c\/strong\u003e, 10Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour\u003c\/strong\u003e, white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e, plastic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse this connector to create T-shape junctions in a single colour LED strip run, joining board to board without a soldering iron. It suits installers extending or branching 10mm strips on the same circuit.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eOpen the terminal, slide the strip end into the PCB channel, then close it with a plier to lock the contact in place. No tools beyond a plier are needed.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096615678240,"sku":"0790404943675","price":2.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404943675-1.webp?v=1785762481"},{"product_id":"led-strip-adapter-connector-cable","title":"LED Strip Adapter Cable 2-Pin\/4-Pin Connector 3528\/5050\/5050 10mm | Skydance","description":"\u003cp\u003eThis adapter cable joins or extends non-waterproof LED strips using a 2-pin connector for single colour strips or a 4-pin connector for RGB strips. It suits 3528 and 5050 strip types at 12V and 24V, and is built for strips 10mm wide.\u003c\/p\u003e\u003ch2\u003eKey features of this led strip adapter cable\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type\u003c\/strong\u003e, 2 pin for single colour strips, 4 pin for RGB strips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip width\u003c\/strong\u003e, fits 10mm wide LED strips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible strips\u003c\/strong\u003e, 3528 and 5050 single colour, plus 5050 RGB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length\u003c\/strong\u003e, 150mm connecting line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it to run a strip around a corner without cutting into the copper pads, or to join two lengths of strip on a straight run. It is a quick connector, so no soldering is needed for the join.\u003c\/p\u003e\u003ch3\u003eImportant note\u003c\/h3\u003e\u003cp\u003eThis connector is designed for non-waterproof strip light only. It is not suitable for outdoor or wet-location strips with a silicone coating.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"2 Pin 10mm single colour","offer_id":52096617775392,"sku":"2P10MM-STR","price":0.98,"currency_code":"GBP","in_stock":true},{"title":"4 pin 10mm RGB","offer_id":52096617808160,"sku":"4P10MM-STR","price":0.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-2p10mm-str-1.webp?v=1785762625"},{"product_id":"motion-sensor-led-strip-kit-12v","title":"LED Strip Light Kit with Motion Sensor 12V Dimmable Warm White | Ledison","description":"\u003cp\u003eA motion sensor LED strip kit for warm white ambient lighting, built around a 12V PIR sensor and a 1.2m LED strip. It switches on automatically as you move, giving a soft glow instead of a harsh overhead light, and works well as a night safety light in a hallway or bedroom.\u003c\/p\u003e\u003ch2\u003eMotion sensor LED strip light kit features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection distance\u003c\/strong\u003e, 3-5 metres at a 100-degree angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply\u003c\/strong\u003e, UK plug, input 100-240V, output DC12V0.5A, with a 1.5m DC leadline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIR sensor\u003c\/strong\u003e, 1 unit, dimmable and flicker-free from 1W up to a maximum of 24W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED strip\u003c\/strong\u003e, 1 roll, DC12V, 8mm wide, 30 LEDs\/M, 3W per strip, 1.2m length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED strip type\u003c\/strong\u003e, 2835 white LEDs, 30 LEDs\/M, 8mm width, DC12V, silica gel construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, supplied with 3M adhesive tape and a sticky pad for the sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to spaces where you want light without reaching for a switch: bed frames, cots, wardrobes, stair treads, cabinets, hallways and mirror surrounds. Stretch a foot out of bed and the strip lights up automatically, letting you move around a dark room safely without turning on a ceiling light.\u003c\/p\u003e\u003ch3\u003eDimmable control\u003c\/h3\u003e\u003cp\u003eThe strip dims smoothly from 1W to its full 24W maximum, so brightness can be set to suit the room rather than staying fixed at one level.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLED strip, 1.2m\u003c\/li\u003e\n\u003cli\u003ePIR motion sensor\u003c\/li\u003e\n\u003cli\u003eUK plug power supply with 1.5m leadline\u003c\/li\u003e\n\u003cli\u003e3M adhesive tape and sticky pad\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096618168608,"sku":"000031","price":20.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-000031-1.webp?v=1785762663"},{"product_id":"skydance-wt5-led-strip-controller","title":"Skydance WT5 WiFi \u0026 RF LED Strip Controller | Tuya 2.4GHz","description":"\u003cp\u003eThe Skydance WT5 is a smart LED strip controller that pairs with either a 2.4GHz RF remote or a WiFi network, giving you two ways to manage your lighting. It works with LED strips built on 51 chips, covering RGB and CCT setups, and needs a 12V or 24V power supply. Control comes through the free Smart Life app by Tuya, available on iOS and Android.\u003c\/p\u003e\u003ch2\u003eKey features of this led strip controller\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip compatibility\u003c\/strong\u003e, works with RGB, single colour, dual colour, RGB + CCT and RGBWW LED strips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply\u003c\/strong\u003e, requires 12V or 24V input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl methods\u003c\/strong\u003e, pairs with RF handheld remotes or connects via WiFi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp control\u003c\/strong\u003e, free Smart Life by Tuya app for iOS and Android\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote compatibility\u003c\/strong\u003e, works with all Skydance 2.4G RF remotes and touch panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver sync\u003c\/strong\u003e, works with LED dimmable drivers and synchronises with Skydance RF controllers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVoice and remote control\u003c\/h2\u003e\u003cp\u003eVoice control works through Google Home and Amazon Alexa, letting you switch lights on or off, change colour or adjust brightness by voice alone.\u003c\/p\u003e\u003ch2\u003eGateway-free WiFi control\u003c\/h2\u003e\u003cp\u003eThe controller connects to your WiFi network directly, with no separate gateway needed. Cloud data support means you can control your lights over a long distance when you are away from home.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes and installations running multiple LED strip types from one system, whether that is downlights, bulbs or several lighting zones controlled through the Mobile App.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"No","offer_id":52096618266912,"sku":"601034","price":35.28,"currency_code":"GBP","in_stock":true},{"title":"Yes","offer_id":52096618299680,"sku":"601034+201033","price":42.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601034-1.webp?v=1785762676"},{"product_id":"led-power-supply-24v-400w-ip67","title":"LED Driver 24V 400W IP67 Constant Voltage | Glacial GP-CVM400P","description":"\u003cp\u003eThe Glacial GP-CVM400P is a 400W constant voltage LED driver built for 24V LED strip installations. It ships in an IP67-rated aluminium enclosure, so it copes with dust, oil, humidity and vibration in outdoor or indoor settings alike.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V constant voltage, 400W, rated current 0-16.5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, universal AC input range 90 ~ 264Vac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, total efficiency at full load 93%, high efficiency 92.5% ~ 94%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, active PFC of 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, OVP, OCP, SCP and OTP built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, less than 0.5W at 230Vac\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild and cooling\u003c\/h2\u003e\u003cp\u003eThe housing is a fully isolated metal enclosure, potted with heat-conducted silicone and cooled by free air convection. Glacial states it runs without compromise between -30°C and +50°C. Dimensions are 300 x 98 x 35mm.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eOne driver can power multiple long runs of 24V LED strip from a single point, cutting down on wiring and installation cost across large arrays. It suits LED strip lighting and moving sign applications where a dust and waterproof enclosure is needed.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096621248800,"sku":"999013","price":87.1,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999013-1.webp?v=1785762794"},{"product_id":"24v-200w-led-driver-constant-voltage","title":"24V 200W Constant Voltage LED Driver IP67 | Glacial","description":"\u003cp\u003eThe Glacial 200W LED driver is a constant voltage power supply for 24V LED strip lighting, built into a sealed IP67 metal enclosure for use in damp, dusty or vibration-heavy environments. The aluminium housing is potted with heat-conducted silicone, combining two cooling methods to keep the driver stable under load.\u003c\/p\u003e\u003ch2\u003eKey features of this 24V LED driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 200W, constant voltage, 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, insulated metal case rated IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 93% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, active, 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, less than 0.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature\u003c\/strong\u003e, works from -30°C to +50°C under free air convection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED strip lighting and moving sign displays, particularly installations exposed to dust, oil, humidity or vibration. Free air convection cooling means no fan is needed, which keeps the unit quiet and reduces points of failure.\u003c\/p\u003e\u003ch3\u003eBuild and cooling\u003c\/h3\u003e\u003cp\u003eThe aluminium body is potted with heat-conducted silicone rather than left as an open PCB. This, paired with the metal housing, spreads heat away from the internal components and supports continuous running without derating in the stated temperature range.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096626721056,"sku":"999005","price":55.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999005-1.webp?v=1785762945"},{"product_id":"24v-2a-led-power-supply-adaptor","title":"24V 2A Mains Power Supply Adaptor | Ledison EU \u0026 UK Plugs","description":"\u003cp\u003eA wall-mounted mains power supply adaptor for LED strip lights, supplying Constant Voltage at 24V and 2A input current. It is non-dimmable and certified for safe domestic use, with the correct plug supplied for your country.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC, Constant Voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent\u003c\/strong\u003e, 2A input current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, non-dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, certified for safe domestic use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug type\u003c\/strong\u003e, UK, EU or US plug supplied according to your country\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to powering 24V LED strip lights in homes, where a simple wall-mounted supply is needed rather than an inline transformer. Because it runs at Constant Voltage, it pairs with standard 24V LED strips rather than constant current fittings.\u003c\/p\u003e\u003ch3\u003ePlug options\u003c\/h3\u003e\u003cp\u003eThe adaptor is supplied with the plug type matching your country, whether that's a UK three-pin, EU two-pin or US plug, so it's ready to use straight out of the box.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096627081504,"sku":"614001","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-614001-1.webp?v=1785762952"},{"product_id":"24v-1a-led-power-supply-adaptor","title":"24V 1A Mains Power Supply Adaptor UK Plug 230VAC Input","description":"\u003cp\u003eA wall-plug power supply delivering 24V DC at 1A, built for constant current LED strips and lights that need a 24V supply. It comes fitted with a UK plug for 230VAC mains input.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, 90~264VAC universal input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC 1A, constant current operation for LED products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 85% efficient with current ripple of ±5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, fully isolated, wall-mounted, Class II design without earth pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, OLP and SCP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature\u003c\/strong\u003e, -10°C to 40°C at full load, maximum case temperature 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower lead length\u003c\/strong\u003e, 1000mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic LED strip installations where a 24V constant current driver is needed. The unit is non-dimmable and certified for safe domestic use, and its slim wall-mounted body keeps the footprint small next to a socket.\u003c\/p\u003e\u003ch3\u003eWhy 24V\u003c\/h3\u003e\u003cp\u003eRunning at 24V rather than 12V means the internal electronics draw 1A instead of 2A for the same power, which keeps the transformer running cooler and should help it last longer.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096633176352,"sku":"614000","price":9.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-614000-1.webp?v=1785763202"},{"product_id":"dual-colour-led-strip-light-24v","title":"LED Strip Light Dual Colour 18W\/m 24V 5m | Ledison Mi-Light","description":"\u003cp\u003eThis 5m roll of dual colour LED strip runs at 18W per metre on a 24V system, switching between 3000K warm white and 6000K cool white. It uses SMD5050 chips fabricated by Epistar and Samsung, with 240 chips stated per metre across a 300 LED array, giving a strip that can be dimmed and colour mixed with a wireless controller sold separately.\u003c\/p\u003e\u003ch2\u003eDual colour led strip features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour temperature\u003c\/strong\u003e, switches between 3000K and 6000K, with CCT blending across the spectrum from 2700K to 6000K using the remote's digital mixer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower and voltage\u003c\/strong\u003e, 18W per metre at 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuminous flux\u003c\/strong\u003e, 800 lumens in warm white, 900 lumens in cool white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, pure copper double layer PCB with white paint finish, gold wire at 99.99% purity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years as standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexibility\u003c\/strong\u003e, resistant to bending, cuttable every 6 LEDs with scissors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFit it to coving, joinery or display shelving where a single fitting needs to shift from a warm ambience to a cooler working light. A single 10 metre run can be powered from one controller and power supply, and longer runs can be built by adding further power supplies in series.\u003c\/p\u003e\u003ch3\u003eController and power supply\u003c\/h3\u003e\u003cp\u003eThe wireless controller has WIFI built in and lets you change colour temperature and dim each channel from a remote control, creating a real mood light rather than a single fixed white. The controller and power supply are sold on separate listings.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThe adhesive backing needs a clean, smooth surface to bond properly, so prepare the mounting surface before fitting.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"5 Meters","offer_id":52204460114208,"sku":"601019","price":55.02,"currency_code":"GBP","in_stock":true},{"title":"5 Meters Extra","offer_id":52204460146976,"sku":"601019-2","price":93.61,"currency_code":"GBP","in_stock":true},{"title":"10 Meters Extra","offer_id":52204460179744,"sku":"601019-3","price":132.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601019-1.webp?v=1785763276"},{"product_id":"led-strip-controller-fut006-remote","title":"Mi-Light FUT006 4-Zone RF Remote Control | Skydance","description":"\u003cp\u003eThe Mi-Light FUT006 is a 4-zone radio remote from the Mi-Light series, giving individual control over each zone through a dedicated radio receiver. It works as a controller for LED strip and other lighting fittings across the Mi-Light\/MiBoxer 2.4G range, letting you adjust brightness and colour temperature from one handset.\u003c\/p\u003e\u003ch2\u003eKey features of this led strip controller\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless technology\u003c\/strong\u003e, 2.4G RF transmission for a stable link to receivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with MiBoxer\/Mi-Light 2.4G series products including receivers, bulbs and downlights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl distance\u003c\/strong\u003e, 30m range between remote and receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment modes\u003c\/strong\u003e, two operating modes for changing brightness and colour temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZone control\u003c\/strong\u003e, four zones can be operated independently from a single remote\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe FUT006 suits any installation already running Mi-Light\/MiBoxer 2.4G fittings, from a single led light strip with controller in one room to a multi-zone setup across a home or small commercial space. Pair it with a compatible receiver on each zone and adjust warmth and output without touching a switch panel.\u003c\/p\u003e\u003ch3\u003eCompatibility note\u003c\/h3\u003e\u003cp\u003eThis remote only operates with specified Mi-Light\/MiBoxer products. Not every item in the wider Mi-Light\/MiBoxer range will respond to this remote, so check your receiver model before pairing.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"Default Title","offer_id":52096634749216,"sku":"601146","price":11.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601142-1.webp?v=1785763315"},{"product_id":"24v-led-strip-light-ip54","title":"24V LED Strip Light SMD2835 8W\/m IP54 5m | Ledison","description":"\u003cp\u003eThe Diamanti LED Strip is a 24V flexible tape light built for indoor accent and feature lighting. Supplied as a single colour 5 metre roll with 60 LEDs per metre, it suits kitchens, bathrooms, bedrooms, living rooms, cabinets and display shelving where a smooth, even light line is wanted.\u003c\/p\u003e\u003ch2\u003e24v led strip lights: key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24V system\u003c\/strong\u003e for lower current draw and reduced voltage drop over longer runs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 LEDs per metre\u003c\/strong\u003e with SMD2835 chips for even light distribution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8W per metre\u003c\/strong\u003e power consumption, up to 900 lumens per metre and up to 4500 lumens across the 5 metre roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP54 protection\u003c\/strong\u003e from a silicone coating on the top surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3M self adhesive backing\u003c\/strong\u003e for fixing to clean, dry, smooth surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuttable\u003c\/strong\u003e at the marked cutting points, with solderless connectors supplied\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it under cabinets, along shelf edges, inside display units or as continuous feature lighting in living spaces. The flexible strip follows corners and curved surfaces, and the pure copper double layer PCB with white finish and gold wire LED chips is intended to keep colour consistent between rolls.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eFit to a clean, dry, non-porous surface free from dust, grease and moisture so the adhesive bonds properly. Cut only at the marked points using sharp scissors; cutting elsewhere can damage the circuit. IP54 is rated for indoor areas with occasional moisture, such as kitchens and bathrooms, but it is not for submersion or direct outdoor rain exposure.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eSupplied with a 5 year warranty as standard.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White","offer_id":52096637927712,"sku":"601008","price":4.4,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52096637960480,"sku":"601010","price":4.4,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52096637993248,"sku":"601009","price":4.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601008-1.webp?v=1785763600"},{"product_id":"zigbee-wifi-gateway-zb-box1","title":"Skydance ZB-Box1 Zigbee 3.0 WiFi Gateway 50 Devices | FUT035W","description":"\u003cp\u003eThe ZB-Box1 is a Zigbee 3.0 gateway from Skydance that bridges Zigbee and WiFi communication in a single compact unit. It works through the MiBoxer Smart APP, letting you add Zigbee 3.0 devices, not only MiBoxer's own range, group them together, and control them from anywhere. No network cable is required, as the gateway communicates with your router over WiFi rather than through an Ethernet port.\u003c\/p\u003e\u003ch2\u003eZigbee 3.0 WiFi gateway for smart lighting control\u003c\/h2\u003e\u003cp\u003eOnce paired, the ZB-Box1 supports up to 50 connected devices and communicates over a range of up to 100 metres in open areas. It sits between your router and your Zigbee network, giving you smartphone app control, voice control and automation from one small box measuring L90.5 x W66 x H15mm.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eZigbee 3.0 standard protocol, supporting the full Zigbee 3.0 product series\u003c\/li\u003e\n\u003cli\u003eSmartphone app control via the MiBoxer Smart APP\u003c\/li\u003e\n\u003cli\u003eThird-party voice control through Amazon Alexa or Google Assistant\u003c\/li\u003e\n\u003cli\u003eScene customisation with Tap-to-Run and automation\u003c\/li\u003e\n\u003cli\u003eTiming settings, Do Not Disturb mode and a sleep\/wake up plan\u003c\/li\u003e\n\u003cli\u003eDevice sharing between users\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe ZB-Box1 suits smart home setups built around Zigbee 3.0 lighting and other Zigbee devices, where one WiFi connected hub is needed to group, schedule and voice control a network without running Ethernet cable to the gateway. It also supports music rhythm response and biorhythm based lighting plans for MiBoxer compatible fittings.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"Default Title","offer_id":52096638058784,"sku":"FUT035W","price":35.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-fut035w-1.webp?v=1785763623"},{"product_id":"led-driver-24v-triac-ip65","title":"LED Dimmable Driver 24V 40W TRIAC IP65 | Glacial GP-CVP040N","description":"\u003cp\u003eThe GP-CVP040N-24VH-P02 is a constant voltage LED driver that outputs 24V DC at 40.8W, built for TRIAC dimming on standard leading and trailing edge dimmers. It runs from a 220-240VAC mains supply and holds a wide 205-256VAC tolerance, so it copes with fluctuating supply voltage without dropping out.\u003c\/p\u003e\u003ch2\u003eLED driver 24V with TRIAC dimming\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC at 1.7A, rated 40.8W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, TRIAC, leading and trailing edge, 5% to 100% range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 220-240VAC rated, 205-256VAC tolerance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRipple and noise\u003c\/strong\u003e, 0.6Vp-p.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 84%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP65, sealed and potted housing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and build\u003c\/h2\u003e\u003cp\u003eThe driver includes over-voltage, over-current, short-circuit and over-temperature protection, each recovering automatically once the fault clears. The potted, fully isolated housing carries an IP65 rating and an operating temperature range of -20°C to +50°C, and Glacial rates the unit at 100,000 hours MTBF.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it to power dimmable LED strip runs in homes, restaurants, retail fit-outs and theatres, wherever a TRIAC wall dimmer needs to control constant voltage LED tape. The IP65 housing means it can be fitted indoors or outdoors, provided it is wired to normal electrical regulations and paired with a compatible TRIAC dimmer.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe unit measures 107.5 x 43.5 x 32mm.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096641204512,"sku":"999032","price":26.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999032-1.webp?v=1785763839"},{"product_id":"24v-120w-led-power-supply","title":"24V 120W Non-Dimmable LED Power Supply | Ledison BK-DP-240500","description":"\u003cp\u003eThis 24V 120W power supply from Ledison is a non-dimmable desktop unit built to run LED strips and fittings that need a steady 24V DC feed. It takes a standard mains input and converts it to a clean low voltage output, making it a straightforward choice for LED installations that do not require dimming control.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, DC24V, 5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 100-240VAC 50~60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rating\u003c\/strong\u003e, 120W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 86W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e, AC\/DC adapter, desktop format\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e, HD-2450\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED strip runs and fixed LED fittings that draw on a 24V supply and do not need dimming. The desktop form factor keeps the unit compact and easy to site near the load rather than in a recessed enclosure.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x 24V 120W AC\/DC power supply (BK-DP-240500)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096641499424,"sku":"120180","price":27.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-120180-1.webp?v=1785763880"},{"product_id":"zigbee-led-strip-controller-rgbw-cct","title":"LED Strip Controller Zigbee 3.0 +2.4G RGB\/RGBW\/CCT | FUT037Z+","description":"\u003cp\u003eThis 3 in 1 LED controller switches between RGB, RGB+W and RGB+CCT modes with one button, giving you a single receiver for multicolour, white-enhanced or tunable white LED strips. It runs on DC12~24V and is rated for up to 12A total output across its channels.\u003c\/p\u003e\u003ch2\u003eLED strip controller with Zigbee 3.0 and 2.4G control\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, Zigbee 3.0 + 2.4GHz protocol, using a Zigbee 3.0 gateway to link with a mobile app or transmitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 6A per channel, max 12A total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, DC12~24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl distance\u003c\/strong\u003e, Zigbee 100m in open area, 2.4G RF 30m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModes\u003c\/strong\u003e, switch between RGB, RGBW and RGB+CCT with one button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking temperature\u003c\/strong\u003e, -10~40°C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFit this receiver behind multicolour or tunable-white LED strip installations where a Zigbee 3.0 mesh network is already in place, or where 2.4G RF remotes are preferred. It is compatible with the Mi-Light \/ MiBoxer 2.4GHz remote series, and can be brought into an Amazon Alexa or Google Home voice setup using the appropriate module.\u003c\/p\u003e\u003ch3\u003eChoosing the right driver\u003c\/h3\u003e\u003cp\u003eBrightness, colour temperature and RGB colour are all adjustable, but the mode you get depends on the LED driver and output mode selected at setup.\u003c\/p\u003e\u003ch2\u003eWireless specification\u003c\/h2\u003e\u003cp\u003eThe controller follows the ZigBee 3.0 standard, operating on the 802.15.4 wireless technology at 2.400-2.480GHz.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"Default Title","offer_id":52096641859872,"sku":"601203","price":35.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601203-1.webp?v=1785763936"},{"product_id":"led-driver-24v-120w-dimmable","title":"LED Driver 24V 120W TRIAC Dimmable IP67 | Glacial GP-TH120N-24V","description":"\u003cp\u003eThe Glacial GP-TH120N-24V is a 120W constant voltage LED driver for 24V LED strip and module installations. It supports TRIAC phase-cut dimming direct from the mains, working with both leading edge and trailing edge dimmers, and is housed in a fully isolated IP67 metal enclosure.\u003c\/p\u003e\u003ch2\u003eLED driver 24v with TRIAC dimming\u003c\/h2\u003e\u003cp\u003eDimming adjustment runs from 1% to 100%, giving smooth control over strip and module brightness in restaurants, jewellery shops, homes and theatres. The AC input voltage range is 205 to 256VAC, and conversion efficiency is rated at 84%.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24VDC constant voltage, 120W rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 1% to 100%, compatible with leading edge and trailing edge TRIAC dimmers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 205 to 256VAC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP67 rated, Class I power unit with FG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, over-voltage (OVP), over-current (OCP), short-circuit (SCP) and over-temperature (OTP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 3 years, RoHS compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to 24V LED strip applications where dimmable, isolated power is needed outdoors or in damp locations, thanks to the IP67-rated metal case. The fully isolated design allows use across a wide range of environments, and the driver can be mounted where mains-voltage TRIAC dimmers are already installed for straightforward retrofit dimming control.\u003c\/p\u003e\u003ch3\u003eBuild and safety\u003c\/h3\u003e\u003cp\u003eThe metal enclosure carries four safety protections as standard: over-voltage, over-current, short-circuit and over-temperature. Combined with the Class I power unit and FG earthing, this driver is built for installations where reliability and electrical safety both matter.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096643301664,"sku":"999019","price":51.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999019-1.webp?v=1785764133"},{"product_id":"recessed-aluminium-led-profile-channel","title":"Recessed U Channel Aluminium Profile 12mm LED Strips | Ledison","description":"\u003cp\u003eThis recessed U channel aluminium profile is built to house LED strips up to 12mm wide, making it a fit for 12V and 24V strips using SMD2538 and SMD5050 chips. The base surface is smooth aluminium, giving a flat, even seat for the strip along its length.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner width\u003c\/strong\u003e, 12.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e, 8.9mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip compatibility\u003c\/strong\u003e, up to 12mm wide, suits SMD2538 and SMD5050 chips at 12V and 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold by the metre\u003c\/strong\u003e, priced and supplied per metre length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis aluminium led channel is designed for recessed installation, sitting flush into a surface such as a ceiling, shelf or cabinet run. The recessed profile gives the LED strip a clean, low-profile finish once fitted with a diffuser.\u003c\/p\u003e\u003ch3\u003eLED strip not included\u003c\/h3\u003e\u003cp\u003eThe profile is supplied on its own. LED strips are sold separately, so pair this channel with a strip that matches the 12mm width and voltage above.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 metre aluminium profile\u003c\/li\u003e\n\u003cli\u003e2 end caps\u003c\/li\u003e\n\u003cli\u003e2 metal mounting clips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096644972832,"sku":"770041","price":6.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770041-1.webp?v=1785764227"},{"product_id":"aluminium-u-channel-led-profile","title":"Aluminium U Channel LED Profile 13mm High Profile | Ledison","description":"\u003cp\u003eA pure aluminium U-shaped channel with a high profile design, resistant to corrosion and supplied ready to fit. This aluminium led channel is 14mm in height and 13mm wide, sold per metre, and comes complete with end caps, a frosted plastic lens and mounting screws.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e, pure aluminium, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e, 14mm height x 13mm width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile shape\u003c\/strong\u003e, U-shaped, high profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, fits 8mm, 10mm and 12mm LED strips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens\u003c\/strong\u003e, frosted plastic lens included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 metre aluminium profile\u003c\/li\u003e\n\u003cli\u003e2 end caps\u003c\/li\u003e\n\u003cli\u003e2 metal clips\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting screws are also included, along with the frosted lens fitted over the channel to diffuse the LED strip below.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis U channel suits a wide range of lighting designs where a recessed or surface aluminium profile for LED lights is needed. The high profile shape gives more depth than slimmer channels, useful where an 8mm to 12mm LED strip needs extra cover or heat dissipation. It works equally well surface mounted or recessed into joinery, shelving or ceiling details.\u003c\/p\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eThe LED strip itself is not included with this profile. Price shown is per metre.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096645988640,"sku":"770044","price":7.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770044-1.webp?v=1785764413"},{"product_id":"led-drywall-profile-corner-1m","title":"LED Recessed Drywall Profile 1m Corner Flange | Ledison","description":"\u003cp\u003eThe Ledison L-Shape Aluminium Recessed Profile is a 1 metre length designed for inside corners of walls and ceilings. It plasters directly into plaster and concrete surfaces and sits on top of the drywall, giving a flush finish once the wall is skimmed. The L-shaped trim lines up the corner neatly for a clean edge.\u003c\/p\u003e\u003ch2\u003eKey features of this led drywall profile\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 1 metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e, 23mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth\u003c\/strong\u003e, 11.3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover\u003c\/strong\u003e, frosted diffuser for even, ambient light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED strip compatibility\u003c\/strong\u003e, IP65-rated strips up to 12mm wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd caps\u003c\/strong\u003e, one with cable entry, one without\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to inside corners where a strip needs to disappear into the join between wall and ceiling, or between two wall faces. The plaster-in fitting works for both residential and commercial rooms, and the frosted cover keeps the light diffused rather than showing individual LEDs.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThe profile is set into plaster or concrete and finished flush with the drywall surface. Once skimmed and painted, only the diffuser and the light line are visible.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x 1 metre L-shape aluminium profile\u003c\/li\u003e\n\u003cli\u003e1 x frosted diffuser cover\u003c\/li\u003e\n\u003cli\u003e1 x end cap with cable entry\u003c\/li\u003e\n\u003cli\u003e1 x end cap without cable entry\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096646381856,"sku":"770055","price":10.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770055-1.webp?v=1785764475"},{"product_id":"aluminium-led-profile-1-metre","title":"Aluminium LED Profile 1 Metre for Strips up to 15mm | Ledison LEDECO","description":"\u003cp\u003eAn anodised aluminium profile for LED strip lights, sold in 1 metre lengths and built to take strips up to 15mm wide. The LEDECO channel suits SMD5050, 3528 and 2835 strips, giving a clean recessed or surface-mounted line of light rather than a visible strip stuck to a surface.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e, anodised aluminium profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 1 metre per unit, priced per metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel size\u003c\/strong\u003e, 18.8mm\/16mm x 7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip compatibility\u003c\/strong\u003e, fits LED strips up to 15mm wide, including SMD5050, 3528 and 2835\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 metre aluminium profile\u003c\/li\u003e\n\u003cli\u003e2 end caps\u003c\/li\u003e\n\u003cli\u003e2 metal mounting clips\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote that the LED strip itself is not included with this profile. Ledison stocks a range of compatible LED strips separately.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe mounting clips allow the profile to be fixed under kitchen cabinets, along shelving, staircases or coving. Anodised aluminium gives a tidy finish and helps spread heat away from the LED strip, which can help the strip run cooler than when fitted with no housing at all.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096647168288,"sku":"0790404944887","price":7.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404944887-1.webp?v=1785764586"},{"product_id":"plaster-in-led-profile-plasterboard","title":"Plaster In Recessed LED Profile for Drywall 1m | Ledison","description":"\u003cp\u003eThis plaster in recessed LED profile is an aluminium channel made to be set into drywall and plasterboard for a trimless, built-in lighting line. Supplied as a 1 metre length with a frosted diffuser, it takes LED strips up to 20mm wide, including two 10mm strips side by side.\u003c\/p\u003e\u003ch2\u003eKey features of this plaster in LED profile\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation type\u003c\/strong\u003e, plasters into drywall and plasterboard for a recessed finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip width\u003c\/strong\u003e, fits LED strips up to 20mm wide, or two 10mm strips together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiffuser\u003c\/strong\u003e, frosted polycarbonate cover for a more even, spot-free light effect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, aluminium extrusion for heat dissipation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, sold as 1 metre pieces as standard, with alternative lengths available for larger projects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible LED strips\u003c\/h2\u003e\u003cp\u003eAny LED strip up to 20mm wide can be fitted into the channel, including common formats such as SMD5050, SMD3528 and SMD2835. The LED strip itself is not included.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis profile suits homes, hotels, offices, retail spaces and commercial interiors where a seamless, integrated lighting line is wanted rather than a surface-mounted fitting. Typical uses include recessed ceiling lighting, wall feature lighting and corridor lighting where the profile becomes part of the finished surface.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 metre aluminium profile with frosted diffuser\u003c\/li\u003e\n\u003cli\u003eEnd caps\u003c\/li\u003e\n\u003cli\u003eMounting clips and brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant information\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLED strip is not included\u003c\/li\u003e\n\u003cli\u003ePrice is per 1 metre length\u003c\/li\u003e\n\u003cli\u003eProduct dimensions are shown in the 3D drawings in the image gallery\u003c\/li\u003e\n\u003cli\u003eEAN: 0604947935991\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096648544544,"sku":"770040","price":9.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770040-1.webp?v=1785764766"},{"product_id":"24v-12w-led-power-supply-screw-terminal","title":"24V Power Supply 12W Screw Terminal LED Driver | Glacial","description":"\u003cp\u003eThis 24V power supply delivers a 12W constant voltage output for small low voltage LED lighting circuits. It suits short runs of 24V LED strip lights, cabinet lighting, display lighting and compatible low voltage LED bulbs.\u003c\/p\u003e\u003ch2\u003e24v power supply for small LED circuits\u003c\/h2\u003e\u003cp\u003eThe unit provides up to 500mA output current at 24V DC and is suitable for LED loads up to 12W. Choosing a driver with some spare capacity helps performance and service life: powering a 6W to 7.2W LED strip from this 12W driver gives useful headroom without overloading it.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC constant voltage, up to 500mA, 12W rated power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, universal 90-264VAC, suitable for standard 230V mains supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass II design\u003c\/strong\u003e, fully isolated plastic enclosure with no earth connection required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections\u003c\/strong\u003e, screw terminal blocks for both input and output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit protection with automatic recovery, and over current protection via constant current limiting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby draw\u003c\/strong\u003e, no-load consumption under 0.5W at 230VAC.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits 24V LED strip lights, under cabinet lighting, display and shelf lighting, and other small decorative LED circuits. Also suitable for low voltage LED bulbs and fittings that need a 24V DC constant voltage input.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis is a constant voltage 24V DC power supply and should only be used with compatible 24V LED products. Do not exceed the 12W rated output. Allow suitable ventilation and avoid locations exposed to excessive heat or moisture. Installation should be carried out by a qualified person in line with current wiring regulations.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096652640544,"sku":"999011","price":13.13,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999011-1.webp?v=1785765065"},{"product_id":"led-driver-24v-400w-ip67-dimmable","title":"LED Driver 24V 400W IP67 3in1 Dimmable | Glacial GP-CVM400P-24V","description":"\u003cp\u003eThe Glacial GP-CVM400P-24V is a constant voltage LED driver built for 24V LED strip lighting, signage and architectural installations. It outputs 24V DC at a rated 400.8W, with up to 16.7A of output current, so a single unit can run larger strip runs without stacking multiple smaller drivers.\u003c\/p\u003e\u003ch2\u003eLED driver 24v built for demanding sites\u003c\/h2\u003e\u003cp\u003eThe driver sits inside a fully insulated aluminium housing rated IP67, suitable for both indoor and outdoor use where dust and moisture are a factor. The metal case doubles as a heatsink, cooling the unit through free air convection with no fan required.\u003c\/p\u003e\u003ch3\u003e3-in-1 dimming\u003c\/h3\u003e\u003cp\u003eThe dimmable version supports three dimming methods: 0-10V DC, PWM dimming across a 0% to 100% duty cycle, and resistance dimming from 0KΩ to 100KΩ. A dim-to-off function is also available on compatible dimmable versions, useful for lighting control systems that need a full off state.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC, 400.8W rated, 0 to 16.7A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 93% typical at 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, greater than 0.98 at 115VAC, greater than 0.94 at 230VAC at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating\u003c\/strong\u003e, IP67, fully insulated aluminium housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection\u003c\/strong\u003e, 4kV\/2kV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in protection\u003c\/strong\u003e, over voltage, over current, short circuit and over temperature, with auto recovery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial LED strip lighting, shopfronts, signage, display lighting and architectural features where a stable 24V DC supply is needed. The IP67 housing also makes it a candidate for outdoor lighting and garden lighting projects where the driver itself is exposed to the weather.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096655360288,"sku":"999028","price":103.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999028-1.webp?v=1785765229"},{"product_id":"l-shape-led-strip-connector-8mm-10mm","title":"LED Strip L-Shape Connector 2-Pin 8mm-10mm | Ledison","description":"\u003cp\u003eThis L-shape connector joins two single colour LED strips around a corner without soldering. It fits strip boards between 8mm and 10mm wide and uses a 2 pin connection, so strips can be extended or turned through a right angle in minutes.\u003c\/p\u003e\u003ch2\u003eKey features of this LED strip L-shape connector\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner design\u003c\/strong\u003e, connects two LED strips around a right angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard width\u003c\/strong\u003e, compatible with 8mm-10mm single colour strips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo soldering\u003c\/strong\u003e, no special tools or solder required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation\u003c\/strong\u003e, plastic casing insulates at 12V, 24V and 48V, tested to a maximum of 100Vdc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation time\u003c\/strong\u003e, clips strips together quickly compared with soldered joins\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUseful anywhere a single colour LED strip run needs to change direction, such as around cabinet edges, coving or shelving. Because it works without solder, it suits installers and DIY users who want a quick, tool-free join.\u003c\/p\u003e\u003ch3\u003eImportant note\u003c\/h3\u003e\u003cp\u003eThis connector is non-waterproof, so it should only be used on indoor, dry installations where the strip itself is also non-waterproof.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096655589664,"sku":"0790404943668","price":2.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404943668-1.webp?v=1785765256"},{"product_id":"rgb-led-strip-wifi-remote-5m","title":"RGB LED Strip Light 5m 3-in-1 Wi-Fi \u0026 Remote | Ledison","description":"\u003cp\u003eThis 5 metre RGB LED strip uses large-chip 3-in-1 LEDs to produce full-spectrum colour, controlled either through a smartphone app or the included infrared remote. It is built as a complete kit, so everything needed for a working install is in the box.\u003c\/p\u003e\u003ch2\u003eLed rgb remote control features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour range\u003c\/strong\u003e, 3-in-1 RGB LEDs create custom colours and dim levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi control\u003c\/strong\u003e, Skydance WT-5 controller lets you switch the strip on or off and set scenes from your phone, anywhere with a connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control\u003c\/strong\u003e, RT11 infrared remote gives full control without needing the app\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan\u003c\/strong\u003e, 50,000-hour LED lifespan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB only\u003c\/strong\u003e, for tunable white output, choose an RGB+CCT or 5-in-1 strip instead\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to home ambience lighting or commercial décor where colour-changing effects are wanted. The Wi-Fi function also works as a presence simulator, letting you switch lighting on remotely while away from home. Installation is straightforward enough for a DIY fit, with no electrician required.\u003c\/p\u003e\u003ch3\u003eCorner and run installations\u003c\/h3\u003e\u003cp\u003eL-shape and T-shape connectors handle corners and junctions, and the long cable links let you extend the run between sections without cutting into the strip itself.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5m RGB LED strip (3-in-1 large-chip LEDs)\u003c\/li\u003e\n\u003cli\u003eSkydance WT-5 Wi-Fi controller\u003c\/li\u003e\n\u003cli\u003eRT11 remote control\u003c\/li\u003e\n\u003cli\u003e4 x L-shape connectors\u003c\/li\u003e\n\u003cli\u003e4 x T-shape connectors\u003c\/li\u003e\n\u003cli\u003e4 x long cable links\u003c\/li\u003e\n\u003cli\u003e120W power supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096655655200,"sku":"601027-custom","price":136.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601027-custom-1.webp?v=1785765267"},{"product_id":"es32-pir-stair-light-controller","title":"Skydance ES32 Staircase Light Controller for LED Strip | PIR Sensor","description":"\u003cp\u003eThe Skydance ES32 is a PIR sensor stair light controller for LED strip installations. It switches lighting on automatically when motion is detected and off again once the area is clear, helping avoid poorly lit steps and wasted energy. The kit includes 2 sensors as standard, with spares available from the drop-down menu.\u003c\/p\u003e\u003ch2\u003eKey features of this motion sensor led light strip controller\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor input\u003c\/strong\u003e, multifunctional PIR controller with daylight sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels\u003c\/strong\u003e, 32-channel constant voltage output for low-voltage LED strips, max 1A per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital output\u003c\/strong\u003e, dual SPI (TTL) signal output for driving 28 types of digital RGB LED strip, compatible with TM1804, TM1809, TM1812, UCS1903, UCS1912, UCS2903, WS2811, WS2812, GS8208, LPD6803, LPD8806, SK9822 and more\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface\u003c\/strong\u003e, OLED display with 3-button control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight modes\u003c\/strong\u003e, selectable modes with adjustable speed and brightness across 1 to 8 levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCascade support\u003c\/strong\u003e, two controllers can be linked together\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFault tolerance\u003c\/strong\u003e, any of the 32 channels can be individually disabled if an LED section fails, and the unit has a built-in self-test function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor options\u003c\/strong\u003e, works with standard IR reflection sensors or the ES-T sensor set for closer sensing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to staircase illumination, pathway and corridor lighting, home and office automation projects, and architectural LED displays. The push switch can also be configured as an induction input, and the controller can be brought into a wider home automation setup with suitable peripherals.\u003c\/p\u003e\u003ch3\u003eProgramming\u003c\/h3\u003e\u003cp\u003eLight duration, motion sensitivity and dimming can all be adjusted through the OLED interface, giving installers control over how the stair lighting behaves once movement is detected.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"No","offer_id":52096657228064,"sku":"601043","price":99.23,"currency_code":"GBP","in_stock":true},{"title":"Yes","offer_id":52096657260832,"sku":"601043+601053","price":115.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601043-1.webp?v=1785765436"},{"product_id":"aluminium-led-channel-slim-7mm","title":"Aluminium LED Profile U Channel Slim 7mm Height | Ledison","description":"\u003cp\u003eA slim U channel aluminium profile for LED strip installations, with a smooth base surface that takes LED strips fitted with 3M self-adhesive backing. Sold per metre.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e, 14.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e, 7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e, Aluminium 6060\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface\u003c\/strong\u003e, smooth aluminium base for strip adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis aluminium led channel suits recessed or surface installations where a low profile is needed, such as under cabinets, shelving or joinery edges. The straight, slim shape keeps the fitting discreet once installed.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eThe base is designed for LED strips fixed with their own 3M adhesive. No strip is included with this profile; strips can be selected separately to suit the run length and colour required.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 metre aluminium profile\u003c\/li\u003e\n\u003cli\u003e2 end caps\u003c\/li\u003e\n\u003cli\u003e2 metal clips\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: this listing is priced per metre and does not include an LED strip.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096657588512,"sku":"0790404944870","price":7.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404944870-1.webp?v=1785765517"},{"product_id":"zigbee-gateway-led-strip-controller","title":"Zigbee 3.0 Smart Gateway for LED Strip Controller | Mi-Light ZB-Box1","description":"\u003cp\u003eThe ZB-Box1 is a Zigbee 3.0 gateway that bridges Wi-Fi and Zigbee communication, letting you bring any Zigbee 3.0 device, not just MiBoxer products, into one app-based control system. Pair it with the MiBoxer Smart APP for group control, remote access and voice control through Amazon Alexa or Google Assistant.\u003c\/p\u003e\u003ch2\u003eLed strip controller integration made simple\u003c\/h2\u003e\u003cp\u003eOnce connected, the ZB-Box1 acts as the hub for your led strip controller network, allowing multiple fittings to be grouped, scheduled and triggered together rather than managed one at a time.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eZigbee 3.0 standard protocol\u003c\/li\u003e\n\u003cli\u003eSupports the wider Zigbee 3.0 product range, not limited to one brand\u003c\/li\u003e\n\u003cli\u003eControl from a smartphone via the MiBoxer app\u003c\/li\u003e\n\u003cli\u003eMusic rhythm response\u003c\/li\u003e\n\u003cli\u003eThird-party voice control support\u003c\/li\u003e\n\u003cli\u003eScene customisation, timing settings and Do Not Disturb mode\u003c\/li\u003e\n\u003cli\u003eSleep and wake-up plans with biorhythm settings\u003c\/li\u003e\n\u003cli\u003eTap-to-Run automation and device sharing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSetup and range\u003c\/h2\u003e\u003cp\u003eNo network cable is required. The ZB-Box1 talks to your router over Wi-Fi and reaches connected Zigbee devices up to 100 metres away in open areas, supporting up to 50 connected devices from a single unit.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes or small installations already running Zigbee lighting or looking to add a controller for led strip setups without rewiring. It works alongside existing MiBoxer compatible products, and long-range control means one gateway can often cover a full floor.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"Default Title","offer_id":52096659390752,"sku":"601200","price":35.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601200-1.webp?v=1785765717"},{"product_id":"led-power-supply-12v-36w","title":"12V 36W LED Power Supply Screw Terminal | Glacial","description":"\u003cp\u003eThis 12V power supply from Glacial delivers a maximum output of 36W and is built for LED strip lights and low-voltage MR16 fittings. It runs on universal AC input from 90V to 264V, making it suitable across UK and European mains supplies, and draws less than 0.5W when idle.\u003c\/p\u003e\u003ch2\u003e12V power supply built for LED strips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 12V constant voltage, non-dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 83% peak, one of the higher figures for a small driver of this size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput range\u003c\/strong\u003e, 90 to 264VAC universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, over-voltage, short-circuit, over-temperature and over-current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, screw terminal blocks for both AC and DC connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-load draw\u003c\/strong\u003e, under 0.5W at 230VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eDesigned for LED strip lighting and low-voltage MR16 downlighters, where a clean, stable DC output matters. The output is flicker-free and free from harmonics and electromagnetic interference, protecting the LED array connected to it.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eTerminal blocks on both the AC input and DC output mean the driver can be wired with just a screwdriver, no soldering or crimping required. The case is fully isolated plastic.\u003c\/p\u003e\u003ch2\u003eBuild and protection\u003c\/h2\u003e\u003cp\u003eThe unit is a Class 2 power supply in constant voltage (CV) mode, with over-current and short-circuit protection built in. Under unstable mains conditions the driver and the connected LEDs are kept safe.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096659783968,"sku":"GP-CVP06N-12V-T02","price":20.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-gp-cvp06n-12v-t02-1.webp?v=1785765781"},{"product_id":"12v-led-strip-driver-12w","title":"12V 12W LED Strip Power Supply Screw Terminal | Glacial","description":"\u003cp\u003eThis Glacial power supply delivers 12W of constant voltage output for LED strip lighting and low voltage LED bulbs. It suits short lengths of strip, from a few centimetres up to 100cm, and the 12 Watt rating is intentionally overrated for 6W to 7.2W strips to give a safety margin.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 12W, constant voltage (CV mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, universal AC 90~264VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e, Class II, no earth pin required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, fully isolated plastic case with screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, OCP\/SCP (overcurrent and short circuit protection)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby draw\u003c\/strong\u003e, no load consumption under 0.5W at 230VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eScrew terminals remove the need for special connectors or crimping tools, so wiring the driver to a strip or fitting is straightforward. The plastic housing keeps the circuitry enclosed and protected once installed.\u003c\/p\u003e\u003ch3\u003eSize and operating range\u003c\/h3\u003e\u003cp\u003eThe unit measures 86 x 45 x 26mm (L x W x H). Operating temperature is rated from -10°C to 40°C at full load.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to short LED strip runs and ultra-low voltage LED bulbs where a compact, screw-terminal driver is preferred over a plug-in adaptor.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096659849504,"sku":"999021","price":12.02,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999021-1.webp?v=1785765791"},{"product_id":"rgb-cct-strip-controller-fut039","title":"Mi-Light RGB+CCT LED Strip Controller FUT039 | Skydance","description":"\u003cp\u003eThe Mi-Light RGB+CCT LED strip controller from Skydance gives you full colour and colour temperature control over compatible 5 in 1 LED strips. It works over 2.4GHz RF with a matching touch remote, so you can shift between warm, natural and cool white or run full colour changing effects from across the room.\u003c\/p\u003e\u003ch2\u003eRGB CCT LED strip controller features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl method\u003c\/strong\u003e, 2.4GHz RF, controlled via touch remote or smartphone app\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour control\u003c\/strong\u003e, colour changing with adjustable saturation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite tuning\u003c\/strong\u003e, dimmable with adjustable colour temperature and brightness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 12-24Vdc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 6A per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange\u003c\/strong\u003e, control distance up to 30 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel number\u003c\/strong\u003e, FUT039\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to 5 in 1 LED strip installations where a single controller needs to handle both RGB colour and CCT white tuning. The wide 12-24Vdc input covers most strip setups, and the RF link means no wired connection is needed between the remote and the receiver.\u003c\/p\u003e\u003ch3\u003eApp and remote control\u003c\/h3\u003e\u003cp\u003eAlongside the RF touch remote, the controller can be operated through a smartphone app for adjusting colour, saturation, brightness and colour temperature without extra wiring.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"Default Title","offer_id":52096663748896,"sku":"601147","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601147-1.webp?v=1785766122"},{"product_id":"rgb-led-strip-kit-5m","title":"RGB LED Strip Light Kit 5m 12W\/m 24V | Ledison","description":"\u003cp\u003eThis RGB LED strip kit gives you a full 5 metre roll of colour changing tape, built at 12 watts per metre and running on 24Vdc for indoor use. It uses SMD5050 LEDs, 300 in total across the roll, and comes complete with a power supply, connectors and a remote control.\u003c\/p\u003e\u003ch2\u003eKey features of this rgb led strip light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED type\u003c\/strong\u003e, SMD5050, 300 LEDs across the 5 metre roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower draw\u003c\/strong\u003e, 12W per metre, 24Vdc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour mixing\u003c\/strong\u003e, 16 colour combinations from red, green and blue, adjusted with a single button on the remote\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput per colour\u003c\/strong\u003e, Red 110 lumen, Green 320 lumen, Blue 90 lumen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, pure copper double layer tape with white paint finish, 99.99% pure gold wire LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years, with a rated life cycle of 50000h\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eDesigned for indoor use in homes, this strip suits ambient lighting in living rooms, kitchens or feature walls. The 24V system allows a single power supply to run a long continuous piece of strip, up to 30 metres, with lower current draw and less voltage drop than a 12V equivalent.\u003c\/p\u003e\u003ch3\u003eCutting and joining\u003c\/h3\u003e\u003cp\u003eThe strip can be cut every 8 LEDs along the marked cutting lines using sharp scissors. Cutting off the marked line breaks the electrical conductivity. Solderless cable and strip connectors are supplied for linking multiple strips together.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eNo special tools or wiring are needed. The adhesive backing needs a clean, smooth surface to bond properly. The strip tolerates any bending radius.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 metre roll, SMD5050, RGB\u003c\/li\u003e\n\u003cli\u003eMi-Light remote controller with soft touch panel\u003c\/li\u003e\n\u003cli\u003eMi-Light RGB mixer\u003c\/li\u003e\n\u003cli\u003ePower supply unit, 120 watts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096664207648,"sku":"601027","price":132.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601027-1.webp?v=1785766160"},{"product_id":"led-strip-light-72w-3m","title":"72W LED Strip Light 3m 24V 2650lm\/m | Ledison","description":"\u003cp\u003eThis 3 metre LED strip runs at 24V DC and delivers 2650 lumen per metre, giving 72W of output across the full roll. It works from a standard or dimmable 24V power supply and is built for single colour installations.\u003c\/p\u003e\u003ch2\u003eKey features of this led strip light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 2650 lumen per metre, 72W across the 3m roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED chips\u003c\/strong\u003e, 120 SMD2835 LEDs per metre for even light distribution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, pure gold wire (99.99%) and pure copper double layer with white paint finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting\u003c\/strong\u003e, cuttable every 8 LEDs along the marked line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive\u003c\/strong\u003e, strong 3M self-adhesive tape on the back for fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 year warranty offered as standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eStrip lights like this suit decorative accents, general lighting and accent lighting in homes and offices. The flexible design allows it to bend around most radii, so it can follow coving, shelving or cabinet edges.\u003c\/p\u003e\u003ch3\u003ePower supply requirements\u003c\/h3\u003e\u003cp\u003eA 30W power supply is needed for every metre, so a full 3m roll needs a 90W power supply. Running at 24V rather than 12V means lower current draw and less voltage drop, which is useful for longer continuous runs from a single power supply.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3m LED strip light roll\u003c\/li\u003e\n\u003cli\u003eCable and strip connectors for solderless joining of multiple strips\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFit the strip to a clean, smooth surface so the adhesive bonds properly. Multiple rolls of the same colour temperature will match, so runs can be combined without visible colour difference.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Warm White \/ Without Power Supply","offer_id":52096670892320,"sku":"601012","price":31.97,"currency_code":"GBP","in_stock":true},{"title":"Warm White \/ Power Supply 100W","offer_id":52096670925088,"sku":"601012-2","price":53.92,"currency_code":"GBP","in_stock":true},{"title":"Natural White \/ Without Power Supply","offer_id":52096670957856,"sku":"601011","price":31.97,"currency_code":"GBP","in_stock":true},{"title":"Natural White \/ Power Supply 100W","offer_id":52096670990624,"sku":"601011-2","price":53.92,"currency_code":"GBP","in_stock":true},{"title":"Cool White \/ Without Power Supply","offer_id":52096671023392,"sku":"601013","price":31.97,"currency_code":"GBP","in_stock":true},{"title":"Cool White \/ Power Supply 100W","offer_id":52096671056160,"sku":"601013-2","price":53.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601012-1.webp?v=1785766497"},{"product_id":"12v-led-driver-200w-constant-voltage","title":"Glacial 200W 12V LED Driver Constant Voltage IP67 Power Supply","description":"\u003cp\u003eThe Glacial 200W LED driver is a constant voltage power supply built for LED strip lighting. Housed in an IP67 metal enclosure, it is rated for use in dusty, oily, high-vibration and humid environments. The aluminium housing is potted with heat-conducted silicone, a combination of cooling methods that helps the driver run from -30°C to +50°C under free air convection.\u003c\/p\u003e\u003ch2\u003eKey features of this 12v led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, 200W constant voltage output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, insulated metal case with IP67 protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, total efficiency at full load of 93%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, active power factor correction of 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby draw\u003c\/strong\u003e, no load consumption of less than 0.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, free air convection with silicone-potted aluminium housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuitable for LED strip light installations and moving sign applications where a stable 12V supply is needed in demanding conditions. The sealed metal housing suits fittings exposed to dust, oil, moisture or vibration, and the wide operating temperature range supports continuous running without interruption.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096671351072,"sku":"999004","price":54.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999004-1.webp?v=1785766558"},{"product_id":"led-strip-light-ip67-warm-white","title":"LED Strip Light 220V IP67 5m Warm White 120 LEDs\/m | Diamanti","description":"\u003cp\u003eThe Diamanti LED Strip Light is a 5 metre run of warm white LEDs housed in a sturdy, transparent silicon tube, rated IP67 for use in wet or damp locations. Each metre carries 120 LEDs, giving a dense, even line of light along the full length of the strip.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof rating\u003c\/strong\u003e, IP67, suitable for outdoor and damp indoor areas such as bathrooms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED density\u003c\/strong\u003e, 120 LEDs per metre across a 5 metre roll.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour\u003c\/strong\u003e, warm white output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing\u003c\/strong\u003e, silicon tube extrusion that shields the LEDs from dust and knocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, permanent 3M adhesive backing plus silicon clips with screws for a secure fix on flat surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePower supply and connectors\u003c\/h2\u003e\u003cp\u003eA waterproof LED driver is included, supplied at 60 watts and rated around 20% above the strip's nominal power so it runs comfortably without strain. The strip itself operates from a 24V supply once stepped down from the mains, and is certified to US and European standards.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUnroll the strip and use the silicon clips to hold the length in place, or rely on the 3M adhesive backing to stick it directly onto a clean, smooth surface. It suits patios, window frames, and other spots where a run of warm, even light is wanted, indoors or out.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it for garden edging, under eaves, along a bar top, or tucked behind a bathroom mirror. The silicon casing and IP67 rating mean it can stay outdoors through wet weather or sit in a steamy room without trouble.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Without Power Supply","offer_id":52096671449376,"sku":"601030","price":44.0,"currency_code":"GBP","in_stock":true},{"title":"LED Driver IP65 60W","offer_id":52096671482144,"sku":"601030-2","price":70.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601030-1.webp?v=1785766590"},{"product_id":"rgb-cct-led-strip-kit-24v","title":"LED Strip Light Kit 5m RGB + CCT WW CW 24V | Ledison","description":"\u003cp\u003eThis 5 in 1 LED strip combines RGB colour with warm white and cool white CCT in one 5 metre kit. It runs on 24V and comes complete with a remote control, a 4-zone Wi-Fi and IR controller and a 120W power supply, so it is ready to install and control from the box.\u003c\/p\u003e\u003ch2\u003eKey features of this RGB CCT LED strip\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour options\u003c\/strong\u003e, 5 in 1 SMD5050 LEDs give RGB, warm white and cool white in a single strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl\u003c\/strong\u003e, remote control with Wi-Fi connectivity and a 4-zone controller that manages up to four zones independently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply\u003c\/strong\u003e, 120W mains power supply included, sized for a 24V system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour rendering\u003c\/strong\u003e, CRI of 90 for natural, accurate colour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, pure gold wire (99.99%) and a pure copper double-layer PCB with white solder mask for heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 year warranty, with the strip maintaining 80% of its original brightness after 50,000 hours of use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it under kitchen cabinets, along bathroom mirrors, behind media units or as a general ambience strip anywhere you want warm white, cool white or full colour on demand. The 24V design keeps current draw lower than a 12V strip of the same length, which helps limit voltage drop over longer runs.\u003c\/p\u003e\u003ch3\u003eCutting and extending\u003c\/h3\u003e\u003cp\u003eThe strip is cuttable every 6 LEDs along the marked lines. One controller and power supply can drive up to 10 metres in a single run; beyond that, connect additional strips in series with extra power supplies. Mount on a clean, smooth, dust-free surface for the adhesive to hold properly.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 metre LED strip\u003c\/li\u003e\n\u003cli\u003e120W mains power supply\u003c\/li\u003e\n\u003cli\u003e4-zone Wi-Fi and IR controller\u003c\/li\u003e\n\u003cli\u003eRemote control\u003c\/li\u003e\n\u003cli\u003e3 x L-shape connectors and 3 x cable connectors\u003c\/li\u003e\n\u003cli\u003eWiring instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096676593952,"sku":"601024-kit","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601024-kit-1.webp?v=1785766812"},{"product_id":"led-driver-60w-ip67-12v","title":"60W LED Strip Driver 12V IP67 1-10V Dimmable | GlacialPower","description":"\u003cp\u003eThe GlacialPower LED strip driver delivers a constant voltage 60W output at 12V DC, built for lighting installations where stable, flicker-free brightness matters. Its fully insulated IP67 plastic housing means it can be fitted indoors or outdoors, and it works as a standard non-dimmable supply if dimming control is not connected.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 60W constant voltage at 12V DC (24V versions also available)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, IP67 fully insulated plastic casing for indoor and outdoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, CV + PWM dimming compatible with 1 to 10V control, giving 0 to 100% output adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, universal 90 to 305VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, OVP, OCP, SCP and OTP built in, with a 2-stage PFC function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, free air convection, no fan required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to 12V LED strip lighting runs in both commercial and residential settings. The IP67 rating makes it a practical choice for outdoor lighting projects, and the 1 to 10V dimming input allows it to be paired with dimmable LED systems for smooth control without flicker.\u003c\/p\u003e\u003ch3\u003eDimming behaviour\u003c\/h3\u003e\u003cp\u003eThe 1 to 10V signal is directly proportional to the PWM duty cycle, so brightness tracks the control signal in equal steps rather than jumping between fixed levels. This driver is also available as an optional dimming variant, GP-LP060-xxVA.\u003c\/p\u003e\u003ch2\u003eClassification\u003c\/h2\u003e\u003cp\u003eThis is a Class 2 power supply unit, with constant voltage output in a PWM style, cooled entirely by free air convection with no moving parts.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096677675296,"sku":"900513","price":28.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-900513-1.webp?v=1785766919"},{"product_id":"l-shape-led-strip-connector-rgbww","title":"L Shape LED Strip Connector 6 Pin PCB for RGBWW | Ledison","description":"\u003cp\u003eThis L shape connector joins 12mm RGBWW LED strip sections without any soldering. It uses a 6 pin PCB design, making it a quick way to change direction on a run of strip or link two lengths together at a corner.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector shape\u003c\/strong\u003e, L shape, for turning a corner on a strip run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin count\u003c\/strong\u003e, 6 pin PCB connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip width\u003c\/strong\u003e, 12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible strip type\u003c\/strong\u003e, RGBWW LED strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting method\u003c\/strong\u003e, solder-free, push fit connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse this connector wherever an RGBWW LED strip run needs to change direction, such as around a corner on a shelf, cabinet or coving. It suits installers and DIY users who want a tidy corner joint without a soldering iron.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096678002976,"sku":"0790404943644","price":3.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0790404943644-1.webp?v=1785766949"},{"product_id":"rgb-cct-led-strip-light-24v","title":"LED Strip Light 5-in-1 RGB CCT Warm \u0026 Cool White 24V 5M | Ledison","description":"\u003cp\u003eThis LED Strip Light combines RGB colour with warm white and cool white in one 5-in-1 strip, running at 24V over a 5 metre length. Switch between colour effects and natural white light depending on the room and the mood you want.\u003c\/p\u003e\u003ch2\u003eKey features of this RGB CCT LED strip\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-in-1 colour technology\u003c\/strong\u003e, RGB plus warm white and cool white in a single strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, 24V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 5 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED type\u003c\/strong\u003e, SMD5050 with gold wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour rendering\u003c\/strong\u003e, CRI above 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl\u003c\/strong\u003e, dimmable and compatible with remote control and Wi-Fi systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to kitchens, bathrooms, living rooms, retail displays and architectural lighting. The dual white tones handle everyday, functional lighting while the RGB side covers decorative or accent work, so one strip does both jobs without swapping fittings.\u003c\/p\u003e\u003ch3\u003eBuild and installation\u003c\/h3\u003e\u003cp\u003eThe strip uses a double-layer PCB for heat dissipation and is built for a long service life, with a rated lifespan of up to 50,000 hours and a 5 year warranty. It can be cut every 6 LEDs to set a custom length and is flexible enough for curved surfaces. A strong adhesive backing on the back makes fitting straightforward, and one controller can run up to 10 metres of strip.\u003c\/p\u003e\u003ch3\u003eColour accuracy\u003c\/h3\u003e\u003cp\u003eWith a CRI rating above 90, colours render close to natural daylight. That matters in kitchens and retail displays, where accurate colour under artificial light affects how food or products actually look.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 metre LED strip light\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096682098976,"sku":"601024","price":49.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601024-1.webp?v=1785767087"},{"product_id":"miboxer-wl5-rgb-cct-strip-controller","title":"MiBoxer WL5 WiFi 5 in 1 LED Strip Controller RGB+CCT 12-24V","description":"\u003cp\u003eThe MiBoxer WL5 is a WiFi LED strip controller built for Single Colour, CCT, RGB, RGBW and RGB+CCT strips. It runs on a 12-24V DC supply and connects straight to a 2.4GHz WiFi network, so no extra hub or bridge is needed to bring it onto your home network.\u003c\/p\u003e\u003ch2\u003eMiboxer wifi 5 in 1 led strip controller features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip compatibility\u003c\/strong\u003e, works with Single Colour, CCT, RGB, RGBW and RGB+CCT LED strips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower input\u003c\/strong\u003e, DC12~24V working voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 6A per channel, 15A total maximum output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl options\u003c\/strong\u003e, Amazon Alexa and Google Assistant voice control, Tuya Smart app control, and a 2.4G RF remote control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour range\u003c\/strong\u003e, 16 million colours with adjustable colour temperature and saturation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, WiFi-IEEE 802.11b\/g\/n 2.4GHz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConnectivity and setup\u003c\/h2\u003e\u003cp\u003eThe WL5 connects directly to a 2.4GHz WiFi network without extra hardware. Multiple controllers can be grouped into zones for scenes across a room or a whole property, and a timer function lets you schedule strips to switch on and off automatically.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes and commercial spaces running mixed LED strip types where a single controller needs to switch between Single Colour, CCT, RGB, RGBW or RGB+CCT strips, with app, voice or remote control on hand.\u003c\/p\u003e\u003ch3\u003eDimensions\u003c\/h3\u003e\u003cp\u003eThe unit measures 124mm x 38mm x 23mm and operates in temperatures from -20 to 60°C.\u003c\/p\u003e","brand":"Skydance","offers":[{"title":"Default Title","offer_id":52096682983712,"sku":"001204","price":24.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-001204-1.webp?v=1785767168"},{"product_id":"led-strip-lights-rgb-white-wifi","title":"Smart WiFi RGB+White LED Strip Light 5m 12V 24W | Ledison","description":"\u003cp\u003eThis Ledison LED strip combines RGB colour with a white channel in a single 5 metre run, controlled from a phone app over Bluetooth or WiFi. It works with Amazon Alexa and Google Assistant for voice control, and comes with a remote controller for use without the app.\u003c\/p\u003e\u003ch2\u003eSmart control for led strip lights\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 5m strip with a PU cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e, 60 LEDs\/M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply\u003c\/strong\u003e, 12V 24W adaptor included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl\u003c\/strong\u003e, Bluetooth or WiFi via app, plus included remote controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice control\u003c\/strong\u003e, works with Amazon Alexa and Google Assistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSetup and app control\u003c\/h2\u003e\u003cp\u003eThe strip pairs with the Smart Life app, available for iOS and Android. Plug the strip in, turn the power off for five seconds, then switch it on and off three times in sequence until the light starts blinking rapidly, which puts it into pairing mode. From there, open the Smart Life app, create an account, tap the plus button on the Home screen, choose the Lighting category, then select Strip Lights (BLE+WiFi) and follow the steps shown on screen.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to under-cabinet lighting, shelving, coving and other decorative runs where colour changing and white light are both wanted from one fitting, with the option of controlling it by voice, app or the supplied remote.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5m RGB+White LED strip with PU cover\u003c\/li\u003e\n\u003cli\u003e1 x remote controller\u003c\/li\u003e\n\u003cli\u003e1 x 24W adaptor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"UK Plug","offer_id":52096688128288,"sku":"601045","price":32.53,"currency_code":"GBP","in_stock":true},{"title":"EU Plug","offer_id":52096688161056,"sku":"601045-2","price":32.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-601045-1.webp?v=1785767316"},{"product_id":"led-profile-corner-drywall-tiles","title":"Recessed LED Profile for Tiles and Drywall Corners 1m | Ledison","description":"\u003cp\u003eAn aluminium LED profile built for inside corners, made by Ledison Lighting for setting into plasterboard, tiles or marble surfaces. The L-shaped trim sits into plaster or concrete for a flush finish, and the frosted PC cover spreads light evenly along flexible LED strips.\u003c\/p\u003e\u003ch2\u003eKey features of this recessed led profile\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, supplied as a 1 metre length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth and width\u003c\/strong\u003e, 11.3mm overall depth, 23mm overall width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip compatibility\u003c\/strong\u003e, fits IP65-rated LED strips up to 12mm wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover\u003c\/strong\u003e, frosted PC diffuser included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd caps\u003c\/strong\u003e, one with cable entry, one without, both included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number\u003c\/strong\u003e, 770056 SJ-ALP4714A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003ePlaster the profile into inside corners of interior walls and ceilings, or set it under the coping of an exterior brick wall to run a lit line along a garden fence. The corner shape keeps the strip hidden until it is switched on, giving a clean line of light rather than a visible fitting.\u003c\/p\u003e\u003ch3\u003eFitting into tiles and drywall\u003c\/h3\u003e\u003cp\u003eBecause the trim is designed for recessing, it works equally well cut into plasterboard before boarding up or set into a tiled corner during installation, so it suits both new-build and renovation work.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1m aluminium profile\u003c\/li\u003e\n\u003cli\u003eFrosted PC cover\u003c\/li\u003e\n\u003cli\u003eEnd cap with cable entry\u003c\/li\u003e\n\u003cli\u003eEnd cap without cable entry\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096688521504,"sku":"770056","price":10.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770056-1.webp?v=1785767329"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/led-tape-strip-lights.oembed?page=2","provider":"LED \u0026 Solar","version":"1.0","type":"link"}