{"title":"LED Strip Drivers 12V \u0026 24V","description":"\u003cp\u003eConstant voltage power supplies for 12V and 24V LED strip, ranging from small 12W screw terminal units up to 600W dimmable supplies for larger runs. These convert mains voltage down to a safe low voltage feed for strip lighting, cabinet lighting and signage.\u003c\/p\u003e\u003cp\u003eRunning LED strip at 24V rather than 12V halves the current needed for the same power, which cuts voltage drop over longer cable runs and reduces heat build up at the driver and connections. This makes 24V the better choice where strip runs are long or where multiple runs are joined together.\u003c\/p\u003e\u003cp\u003eOptions here include fixed output adaptors with UK and EU plugs, screw terminal supplies for fitting inside enclosures, and dimmable drivers for use with triac or trailing edge dimmer switches. Choose the voltage to match your strip and the wattage to comfortably cover your total LED load.\u003c\/p\u003e","products":[{"product_id":"led-driver-24v-60w-ip67-glacial","title":"LED Driver 24V 60W IP67 Constant Voltage | Glacial GP‐LS60P‐24CA","description":"\u003cp\u003eThe Glacial GP‐LS60P‐24CA is a 24V constant voltage LED driver rated at 60W, built with an aluminium housing potted in heat-conductive silicone. The sealed IP67 construction lets it work in dusty, oily, high-vibration and humid conditions where an unprotected driver would fail.\u003c\/p\u003e\u003ch2\u003eKey features of this 24v led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, active PFC rated at 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, free air convection, no fan required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, less than 0.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, OVP, OCP, SCP and OTP built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, universal 90~305V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e, ErP EU_1194_2012 Stage 3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperating mode\u003c\/h2\u003e\u003cp\u003eThe GP‐LS60P Series runs in constant current mode, with short circuit protection in hiccup mode that recovers once the fault clears. Over voltage and over temperature faults trigger latch mode, requiring a re-power to reset. Set-up time is under 0.5 seconds at 230VAC.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuitable as a power source for LED strips and moving sign installations, indoors or in exposed locations where the IP67 rating and wide temperature tolerance matter.\u003c\/p\u003e\u003ch2\u003eSafety and EMC\u003c\/h2\u003e\u003cp\u003eCertified to UL8750, EN61347-1 and EN61347-2-13, with EMI conduction and radiation compliant to EN55015 and FCC Part 15. Harmonic current output meets EN61000-3-2 Class C and EN61000-3-3, and EMS immunity is compliant to the EN61000-4 series and EN61547.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe unit measures 199.3 x 49.5 x 40.5mm and weighs 762g.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096614498592,"sku":"900408","price":24.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-900408-1.webp?v=1785762317"},{"product_id":"led-power-supply-24v-400w-ip67","title":"LED Driver 24V 400W IP67 Constant Voltage | Glacial GP-CVM400P","description":"\u003cp\u003eThe Glacial GP-CVM400P is a 400W constant voltage LED driver built for 24V LED strip installations. It ships in an IP67-rated aluminium enclosure, so it copes with dust, oil, humidity and vibration in outdoor or indoor settings alike.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V constant voltage, 400W, rated current 0-16.5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, universal AC input range 90 ~ 264Vac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, total efficiency at full load 93%, high efficiency 92.5% ~ 94%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, active PFC of 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, OVP, OCP, SCP and OTP built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, less than 0.5W at 230Vac\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild and cooling\u003c\/h2\u003e\u003cp\u003eThe housing is a fully isolated metal enclosure, potted with heat-conducted silicone and cooled by free air convection. Glacial states it runs without compromise between -30°C and +50°C. Dimensions are 300 x 98 x 35mm.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eOne driver can power multiple long runs of 24V LED strip from a single point, cutting down on wiring and installation cost across large arrays. It suits LED strip lighting and moving sign applications where a dust and waterproof enclosure is needed.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096621248800,"sku":"999013","price":87.1,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999013-1.webp?v=1785762794"},{"product_id":"24v-200w-led-driver-constant-voltage","title":"24V 200W Constant Voltage LED Driver IP67 | Glacial","description":"\u003cp\u003eThe Glacial 200W LED driver is a constant voltage power supply for 24V LED strip lighting, built into a sealed IP67 metal enclosure for use in damp, dusty or vibration-heavy environments. The aluminium housing is potted with heat-conducted silicone, combining two cooling methods to keep the driver stable under load.\u003c\/p\u003e\u003ch2\u003eKey features of this 24V LED driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 200W, constant voltage, 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, insulated metal case rated IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 93% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, active, 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, less than 0.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature\u003c\/strong\u003e, works from -30°C to +50°C under free air convection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED strip lighting and moving sign displays, particularly installations exposed to dust, oil, humidity or vibration. Free air convection cooling means no fan is needed, which keeps the unit quiet and reduces points of failure.\u003c\/p\u003e\u003ch3\u003eBuild and cooling\u003c\/h3\u003e\u003cp\u003eThe aluminium body is potted with heat-conducted silicone rather than left as an open PCB. This, paired with the metal housing, spreads heat away from the internal components and supports continuous running without derating in the stated temperature range.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096626721056,"sku":"999005","price":55.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999005-1.webp?v=1785762945"},{"product_id":"24v-2a-led-power-supply-adaptor","title":"24V 2A Mains Power Supply Adaptor | Ledison EU \u0026 UK Plugs","description":"\u003cp\u003eA wall-mounted mains power supply adaptor for LED strip lights, supplying Constant Voltage at 24V and 2A input current. It is non-dimmable and certified for safe domestic use, with the correct plug supplied for your country.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC, Constant Voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent\u003c\/strong\u003e, 2A input current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, non-dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, certified for safe domestic use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug type\u003c\/strong\u003e, UK, EU or US plug supplied according to your country\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to powering 24V LED strip lights in homes, where a simple wall-mounted supply is needed rather than an inline transformer. Because it runs at Constant Voltage, it pairs with standard 24V LED strips rather than constant current fittings.\u003c\/p\u003e\u003ch3\u003ePlug options\u003c\/h3\u003e\u003cp\u003eThe adaptor is supplied with the plug type matching your country, whether that's a UK three-pin, EU two-pin or US plug, so it's ready to use straight out of the box.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096627081504,"sku":"614001","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-614001-1.webp?v=1785762952"},{"product_id":"24v-1a-led-power-supply-adaptor","title":"24V 1A Mains Power Supply Adaptor UK Plug 230VAC Input","description":"\u003cp\u003eA wall-plug power supply delivering 24V DC at 1A, built for constant current LED strips and lights that need a 24V supply. It comes fitted with a UK plug for 230VAC mains input.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, 90~264VAC universal input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC 1A, constant current operation for LED products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 85% efficient with current ripple of ±5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, fully isolated, wall-mounted, Class II design without earth pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, OLP and SCP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature\u003c\/strong\u003e, -10°C to 40°C at full load, maximum case temperature 70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower lead length\u003c\/strong\u003e, 1000mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to domestic LED strip installations where a 24V constant current driver is needed. The unit is non-dimmable and certified for safe domestic use, and its slim wall-mounted body keeps the footprint small next to a socket.\u003c\/p\u003e\u003ch3\u003eWhy 24V\u003c\/h3\u003e\u003cp\u003eRunning at 24V rather than 12V means the internal electronics draw 1A instead of 2A for the same power, which keeps the transformer running cooler and should help it last longer.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096633176352,"sku":"614000","price":9.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-614000-1.webp?v=1785763202"},{"product_id":"led-driver-24v-triac-ip65","title":"LED Dimmable Driver 24V 40W TRIAC IP65 | Glacial GP-CVP040N","description":"\u003cp\u003eThe GP-CVP040N-24VH-P02 is a constant voltage LED driver that outputs 24V DC at 40.8W, built for TRIAC dimming on standard leading and trailing edge dimmers. It runs from a 220-240VAC mains supply and holds a wide 205-256VAC tolerance, so it copes with fluctuating supply voltage without dropping out.\u003c\/p\u003e\u003ch2\u003eLED driver 24V with TRIAC dimming\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC at 1.7A, rated 40.8W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, TRIAC, leading and trailing edge, 5% to 100% range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 220-240VAC rated, 205-256VAC tolerance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRipple and noise\u003c\/strong\u003e, 0.6Vp-p.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 84%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP65, sealed and potted housing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and build\u003c\/h2\u003e\u003cp\u003eThe driver includes over-voltage, over-current, short-circuit and over-temperature protection, each recovering automatically once the fault clears. The potted, fully isolated housing carries an IP65 rating and an operating temperature range of -20°C to +50°C, and Glacial rates the unit at 100,000 hours MTBF.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse it to power dimmable LED strip runs in homes, restaurants, retail fit-outs and theatres, wherever a TRIAC wall dimmer needs to control constant voltage LED tape. The IP65 housing means it can be fitted indoors or outdoors, provided it is wired to normal electrical regulations and paired with a compatible TRIAC dimmer.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe unit measures 107.5 x 43.5 x 32mm.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096641204512,"sku":"999032","price":26.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999032-1.webp?v=1785763839"},{"product_id":"24v-120w-led-power-supply","title":"24V 120W Non-Dimmable LED Power Supply | Ledison BK-DP-240500","description":"\u003cp\u003eThis 24V 120W power supply from Ledison is a non-dimmable desktop unit built to run LED strips and fittings that need a steady 24V DC feed. It takes a standard mains input and converts it to a clean low voltage output, making it a straightforward choice for LED installations that do not require dimming control.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, DC24V, 5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 100-240VAC 50~60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rating\u003c\/strong\u003e, 120W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 86W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e, AC\/DC adapter, desktop format\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e, HD-2450\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED strip runs and fixed LED fittings that draw on a 24V supply and do not need dimming. The desktop form factor keeps the unit compact and easy to site near the load rather than in a recessed enclosure.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x 24V 120W AC\/DC power supply (BK-DP-240500)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096641499424,"sku":"120180","price":27.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-120180-1.webp?v=1785763880"},{"product_id":"led-driver-24v-120w-dimmable","title":"LED Driver 24V 120W TRIAC Dimmable IP67 | Glacial GP-TH120N-24V","description":"\u003cp\u003eThe Glacial GP-TH120N-24V is a 120W constant voltage LED driver for 24V LED strip and module installations. It supports TRIAC phase-cut dimming direct from the mains, working with both leading edge and trailing edge dimmers, and is housed in a fully isolated IP67 metal enclosure.\u003c\/p\u003e\u003ch2\u003eLED driver 24v with TRIAC dimming\u003c\/h2\u003e\u003cp\u003eDimming adjustment runs from 1% to 100%, giving smooth control over strip and module brightness in restaurants, jewellery shops, homes and theatres. The AC input voltage range is 205 to 256VAC, and conversion efficiency is rated at 84%.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24VDC constant voltage, 120W rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 1% to 100%, compatible with leading edge and trailing edge TRIAC dimmers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 205 to 256VAC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP67 rated, Class I power unit with FG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, over-voltage (OVP), over-current (OCP), short-circuit (SCP) and over-temperature (OTP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 3 years, RoHS compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to 24V LED strip applications where dimmable, isolated power is needed outdoors or in damp locations, thanks to the IP67-rated metal case. The fully isolated design allows use across a wide range of environments, and the driver can be mounted where mains-voltage TRIAC dimmers are already installed for straightforward retrofit dimming control.\u003c\/p\u003e\u003ch3\u003eBuild and safety\u003c\/h3\u003e\u003cp\u003eThe metal enclosure carries four safety protections as standard: over-voltage, over-current, short-circuit and over-temperature. Combined with the Class I power unit and FG earthing, this driver is built for installations where reliability and electrical safety both matter.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096643301664,"sku":"999019","price":51.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999019-1.webp?v=1785764133"},{"product_id":"24v-12w-led-power-supply-screw-terminal","title":"24V Power Supply 12W Screw Terminal LED Driver | Glacial","description":"\u003cp\u003eThis 24V power supply delivers a 12W constant voltage output for small low voltage LED lighting circuits. It suits short runs of 24V LED strip lights, cabinet lighting, display lighting and compatible low voltage LED bulbs.\u003c\/p\u003e\u003ch2\u003e24v power supply for small LED circuits\u003c\/h2\u003e\u003cp\u003eThe unit provides up to 500mA output current at 24V DC and is suitable for LED loads up to 12W. Choosing a driver with some spare capacity helps performance and service life: powering a 6W to 7.2W LED strip from this 12W driver gives useful headroom without overloading it.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC constant voltage, up to 500mA, 12W rated power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, universal 90-264VAC, suitable for standard 230V mains supplies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass II design\u003c\/strong\u003e, fully isolated plastic enclosure with no earth connection required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections\u003c\/strong\u003e, screw terminal blocks for both input and output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit protection with automatic recovery, and over current protection via constant current limiting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby draw\u003c\/strong\u003e, no-load consumption under 0.5W at 230VAC.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits 24V LED strip lights, under cabinet lighting, display and shelf lighting, and other small decorative LED circuits. Also suitable for low voltage LED bulbs and fittings that need a 24V DC constant voltage input.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThis is a constant voltage 24V DC power supply and should only be used with compatible 24V LED products. Do not exceed the 12W rated output. Allow suitable ventilation and avoid locations exposed to excessive heat or moisture. Installation should be carried out by a qualified person in line with current wiring regulations.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096652640544,"sku":"999011","price":13.13,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999011-1.webp?v=1785765065"},{"product_id":"led-driver-24v-400w-ip67-dimmable","title":"LED Driver 24V 400W IP67 3in1 Dimmable | Glacial GP-CVM400P-24V","description":"\u003cp\u003eThe Glacial GP-CVM400P-24V is a constant voltage LED driver built for 24V LED strip lighting, signage and architectural installations. It outputs 24V DC at a rated 400.8W, with up to 16.7A of output current, so a single unit can run larger strip runs without stacking multiple smaller drivers.\u003c\/p\u003e\u003ch2\u003eLED driver 24v built for demanding sites\u003c\/h2\u003e\u003cp\u003eThe driver sits inside a fully insulated aluminium housing rated IP67, suitable for both indoor and outdoor use where dust and moisture are a factor. The metal case doubles as a heatsink, cooling the unit through free air convection with no fan required.\u003c\/p\u003e\u003ch3\u003e3-in-1 dimming\u003c\/h3\u003e\u003cp\u003eThe dimmable version supports three dimming methods: 0-10V DC, PWM dimming across a 0% to 100% duty cycle, and resistance dimming from 0KΩ to 100KΩ. A dim-to-off function is also available on compatible dimmable versions, useful for lighting control systems that need a full off state.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC, 400.8W rated, 0 to 16.7A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 93% typical at 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, greater than 0.98 at 115VAC, greater than 0.94 at 230VAC at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating\u003c\/strong\u003e, IP67, fully insulated aluminium housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection\u003c\/strong\u003e, 4kV\/2kV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in protection\u003c\/strong\u003e, over voltage, over current, short circuit and over temperature, with auto recovery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial LED strip lighting, shopfronts, signage, display lighting and architectural features where a stable 24V DC supply is needed. The IP67 housing also makes it a candidate for outdoor lighting and garden lighting projects where the driver itself is exposed to the weather.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096655360288,"sku":"999028","price":103.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999028-1.webp?v=1785765229"},{"product_id":"led-power-supply-12v-36w","title":"12V 36W LED Power Supply Screw Terminal | Glacial","description":"\u003cp\u003eThis 12V power supply from Glacial delivers a maximum output of 36W and is built for LED strip lights and low-voltage MR16 fittings. It runs on universal AC input from 90V to 264V, making it suitable across UK and European mains supplies, and draws less than 0.5W when idle.\u003c\/p\u003e\u003ch2\u003e12V power supply built for LED strips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 12V constant voltage, non-dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 83% peak, one of the higher figures for a small driver of this size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput range\u003c\/strong\u003e, 90 to 264VAC universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, over-voltage, short-circuit, over-temperature and over-current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, screw terminal blocks for both AC and DC connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-load draw\u003c\/strong\u003e, under 0.5W at 230VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eDesigned for LED strip lighting and low-voltage MR16 downlighters, where a clean, stable DC output matters. The output is flicker-free and free from harmonics and electromagnetic interference, protecting the LED array connected to it.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eTerminal blocks on both the AC input and DC output mean the driver can be wired with just a screwdriver, no soldering or crimping required. The case is fully isolated plastic.\u003c\/p\u003e\u003ch2\u003eBuild and protection\u003c\/h2\u003e\u003cp\u003eThe unit is a Class 2 power supply in constant voltage (CV) mode, with over-current and short-circuit protection built in. Under unstable mains conditions the driver and the connected LEDs are kept safe.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096659783968,"sku":"GP-CVP06N-12V-T02","price":20.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-gp-cvp06n-12v-t02-1.webp?v=1785765781"},{"product_id":"12v-led-strip-driver-12w","title":"12V 12W LED Strip Power Supply Screw Terminal | Glacial","description":"\u003cp\u003eThis Glacial power supply delivers 12W of constant voltage output for LED strip lighting and low voltage LED bulbs. It suits short lengths of strip, from a few centimetres up to 100cm, and the 12 Watt rating is intentionally overrated for 6W to 7.2W strips to give a safety margin.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 12W, constant voltage (CV mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, universal AC 90~264VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e, Class II, no earth pin required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, fully isolated plastic case with screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, OCP\/SCP (overcurrent and short circuit protection)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby draw\u003c\/strong\u003e, no load consumption under 0.5W at 230VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eScrew terminals remove the need for special connectors or crimping tools, so wiring the driver to a strip or fitting is straightforward. The plastic housing keeps the circuitry enclosed and protected once installed.\u003c\/p\u003e\u003ch3\u003eSize and operating range\u003c\/h3\u003e\u003cp\u003eThe unit measures 86 x 45 x 26mm (L x W x H). Operating temperature is rated from -10°C to 40°C at full load.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to short LED strip runs and ultra-low voltage LED bulbs where a compact, screw-terminal driver is preferred over a plug-in adaptor.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096659849504,"sku":"999021","price":12.02,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999021-1.webp?v=1785765791"},{"product_id":"12v-led-driver-200w-constant-voltage","title":"Glacial 200W 12V LED Driver Constant Voltage IP67 Power Supply","description":"\u003cp\u003eThe Glacial 200W LED driver is a constant voltage power supply built for LED strip lighting. Housed in an IP67 metal enclosure, it is rated for use in dusty, oily, high-vibration and humid environments. The aluminium housing is potted with heat-conducted silicone, a combination of cooling methods that helps the driver run from -30°C to +50°C under free air convection.\u003c\/p\u003e\u003ch2\u003eKey features of this 12v led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, 200W constant voltage output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, insulated metal case with IP67 protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, total efficiency at full load of 93%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, active power factor correction of 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby draw\u003c\/strong\u003e, no load consumption of less than 0.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, free air convection with silicone-potted aluminium housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuitable for LED strip light installations and moving sign applications where a stable 12V supply is needed in demanding conditions. The sealed metal housing suits fittings exposed to dust, oil, moisture or vibration, and the wide operating temperature range supports continuous running without interruption.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096671351072,"sku":"999004","price":54.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999004-1.webp?v=1785766558"},{"product_id":"led-driver-60w-ip67-12v","title":"60W LED Strip Driver 12V IP67 1-10V Dimmable | GlacialPower","description":"\u003cp\u003eThe GlacialPower LED strip driver delivers a constant voltage 60W output at 12V DC, built for lighting installations where stable, flicker-free brightness matters. Its fully insulated IP67 plastic housing means it can be fitted indoors or outdoors, and it works as a standard non-dimmable supply if dimming control is not connected.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 60W constant voltage at 12V DC (24V versions also available)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, IP67 fully insulated plastic casing for indoor and outdoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, CV + PWM dimming compatible with 1 to 10V control, giving 0 to 100% output adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, universal 90 to 305VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, OVP, OCP, SCP and OTP built in, with a 2-stage PFC function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e, free air convection, no fan required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to 12V LED strip lighting runs in both commercial and residential settings. The IP67 rating makes it a practical choice for outdoor lighting projects, and the 1 to 10V dimming input allows it to be paired with dimmable LED systems for smooth control without flicker.\u003c\/p\u003e\u003ch3\u003eDimming behaviour\u003c\/h3\u003e\u003cp\u003eThe 1 to 10V signal is directly proportional to the PWM duty cycle, so brightness tracks the control signal in equal steps rather than jumping between fixed levels. This driver is also available as an optional dimming variant, GP-LP060-xxVA.\u003c\/p\u003e\u003ch2\u003eClassification\u003c\/h2\u003e\u003cp\u003eThis is a Class 2 power supply unit, with constant voltage output in a PWM style, cooled entirely by free air convection with no moving parts.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096677675296,"sku":"900513","price":28.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-900513-1.webp?v=1785766919"},{"product_id":"led-strip-driver-24v-36w","title":"24V Power Supply 36W LED Strip Driver | Glacial GP-CVP036N-24V","description":"\u003cp\u003eA compact 24V power supply built for LED strip lighting and low voltage LED bulbs. Rated at 36W, the Glacial driver suits LED strips up to 5 metres long, including 6w-7.2w strips where an overrated supply is recommended for reliable operation.\u003c\/p\u003e\u003ch2\u003e24v power supply features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC, constant voltage design (CV mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, universal range 90~264VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, under 0.5W at 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, over current protection (OCP) and short circuit protection (SCP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature\u003c\/strong\u003e, -10°C to 40°C at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, fully isolated plastic case with screw terminals, Class 2 power supply unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits short runs of LED strip lighting from a few centimetres up to 5 metres, and any 24V LED circuit within that range. The screw terminal design means no special connectors or crimping tools are needed on site, which speeds up installation on strip runs and low voltage bulb circuits alike.\u003c\/p\u003e\u003ch3\u003eBuild\u003c\/h3\u003e\u003cp\u003eThe plastic enclosure houses the circuitry with overvoltage and short circuit protection built in as standard, despite the driver's small footprint.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003e110 x 35 x 25mm (L x W x H).\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096693535008,"sku":"900515","price":20.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-900515-1.webp?v=1785767442"},{"product_id":"led-power-supply-24v-600w","title":"600W Constant Voltage LED Power Supply 24V Dimmable | Glacial Power","description":"\u003cp\u003eThe Glacial Power GP-CVM600P is a constant voltage LED driver rated at 600W, built for LED strips, signage and long track lighting runs. This 24V dimmable version pairs a compact 2.4kg housing with 95% efficiency and 1-10V dimming control, and it carries UK and EU approval.\u003c\/p\u003e\u003ch2\u003eKey features of this LED power supply 24V\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e: up to 600W constant voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e: 1-10V dimmable switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e: 95% at 24V output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: compact 2.4kg housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput range\u003c\/strong\u003e: 90 to 305VAC universal AC input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e: OVP, OCP, SCP and OTP built in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eDesigned for LED strips, illuminated signage, light boxes, LED neon flex, aluminium profile and 48V magnetic track lighting. The active PFC design keeps power factor above 0.98 at 115VAC and above 0.95 at 230VAC at full load, with total harmonic distortion under 10% at 230VAC.\u003c\/p\u003e\u003ch3\u003eBuild and protection\u003c\/h3\u003e\u003cp\u003eThe case is fully insulated and IP67 rated, cooled by free air convection through a metal housing. Surge protection is rated at 4KV\/2KV, and standby power draw stays under 0.5W at 230VAC on dimming models.\u003c\/p\u003e\u003ch2\u003eOperating conditions\u003c\/h2\u003e\u003cp\u003eStandard operating temperature runs from -40°C to +50°C, subject to the output load derating curve. Inrush current at cold start is typically 55A at 230VAC.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096700907808,"sku":"999017","price":164.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999017-1.webp?v=1785767738"},{"product_id":"led-driver-200w-24v-constant-voltage","title":"LED Driver 24V 200W IP67 Constant Voltage 3in1 Dimmable | Glacial","description":"\u003cp\u003eThe Glacial 200W LED driver supplies a constant 24V output for LED strip lighting and sign applications. Its aluminium housing is potted with heat-conducted silicone and rated IP67, so it copes with dusty, oily, humid or high-vibration locations without a separate enclosure.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V constant voltage, 200W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 3in1: resistance dimming, 0-10V, PWM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, insulated metal case, IP67 protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 93% total efficiency at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, active power factor correction of 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby draw\u003c\/strong\u003e, no load consumption under 0.5W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperating conditions\u003c\/h2\u003e\u003cp\u003eCooling relies on the potted silicone housing combined with free air convection, allowing the driver to run between -30°C and +50°C without derating.\u003c\/p\u003e\u003ch3\u003eWhere it's used\u003c\/h3\u003e\u003cp\u003eIts constant voltage output and dimming options make it suited to LED strip installations and moving sign applications where continuous, uninterrupted power is needed.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096712573216,"sku":"999018","price":82.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999018-1.webp?v=1785768691"},{"product_id":"led-driver-24v-300w-ip67","title":"LED Driver 24V 300W IP67 Constant Voltage | Glacial GP-CVM300P","description":"\u003cp\u003eThe Glacial GP-CVM300P is a 300W constant voltage LED driver built for 24V LED strip lighting. It runs in a fully isolated aluminium metal housing rated IP67 for dust and waterproof protection, so it suits outdoor runs as well as indoor installations in dusty, oily or humid spaces.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 300W constant voltage, rated current 0 to 12.5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, universal range 90 to 264Vac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, total efficiency at full load 93%, up to 92.5% to 94% depending on load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, built-in active PFC, 0.98\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, over-current (OCP), short circuit (SCP), over-temperature (OTP) and over voltage (OVP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, less than 0.5W at 230Vac\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild and cooling\u003c\/h2\u003e\u003cp\u003eThe aluminium housing is potted with heat-conducted silicone and cooled by free air convection, with no fans involved. Glacial states it operates without compromise between -30°C and +50°C. The enclosure measures 250 x 98 x 35mm.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED strip lighting and moving sign applications where a steady 24V supply is needed in demanding environments. The IP67 rating and metal casing make it a practical choice for locations exposed to vibration, moisture or airborne contaminants.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096713294112,"sku":"999012","price":65.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999012-1.webp?v=1785768799"},{"product_id":"led-power-supply-24v-48w","title":"24V 2A 48W LED Power Supply | Glacial GP-LVB024-32D","description":"\u003cp\u003eThe Glacial GP-LVB024-32D is a 48W constant voltage power supply built for 24V LED strip lighting. It is non-dimmable and suits short runs from a few centimetres up to 5 metres of strip.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC, 0-2A rated current range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, 48W rated maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, universal AC input from 90 to 305VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby draw\u003c\/strong\u003e, less than 0.5W at no load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, over current protection (OCP) and short circuit protection (SCP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, slim enclosure with terminal block connections, 300 x 33.3 x 28mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eIts compact, slim housing and terminal block wiring make it well suited to furniture lighting and other cramped installation spaces where a bulky transformer will not fit. The built-in Active PFC function and constant voltage mode keep it dedicated to LED strip circuits rather than general purpose use.\u003c\/p\u003e\u003ch3\u003eOperating range\u003c\/h3\u003e\u003cp\u003eThe driver runs across an operating temperature range of -10°C to 40°C at full load, so check the installation location falls within that range before fitting.\u003c\/p\u003e\u003cp\u003eTerminal block wiring on both input and output keeps installation straightforward for anyone connecting up 24V LED strip circuits.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096713359648,"sku":"GP-LVB024-32D","price":27.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-gp-lvb024-32d-1.webp?v=1785768831"},{"product_id":"24v-power-supply-36w-led-driver","title":"24V Power Supply 36W Constant Voltage LED Driver | Glacial","description":"\u003cp\u003eThis 24V power supply delivers a 36W constant voltage output for LED strip lights, low voltage LED bulbs and small 24V DC lighting installations. The GP-CVP036N-24V-T12 provides 24V DC output at up to 1.5A, suitable for cabinet lighting, display lighting and decorative LED runs.\u003c\/p\u003e\u003ch2\u003e24V power supply for LED strip lighting\u003c\/h2\u003e\u003cp\u003eConstant voltage design keeps the output steady for 24V LED products that need a stable DC feed. Check the wattage per metre of any LED strip before wiring it in: this unit can carry loads up to 36W in total, which covers around 5 metres of 7.2W per metre strip provided the combined load stays within the rated output.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 24V DC constant voltage, up to 1.5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power\u003c\/strong\u003e, 36W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input\u003c\/strong\u003e, 90-264VAC universal range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass II design\u003c\/strong\u003e, fully isolated plastic case, no earth connection required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, over current, short circuit, over temperature and over voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo load consumption\u003c\/strong\u003e, under 0.5W at 230VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, 2P screw terminal blocks on input and output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFits 24V LED strip lights, under cabinet lighting, retail display lighting, shelf and showcase lighting, decorative low voltage LED lighting, and low voltage LED bulbs that need a 24V DC constant voltage input.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse only with compatible 24V LED products.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the 36W rated output.\u003c\/li\u003e\n\u003cli\u003eCheck the total wattage of the connected LED strip or circuit before wiring.\u003c\/li\u003e\n\u003cli\u003eAllow ventilation around the driver and avoid covering it with insulation.\u003c\/li\u003e\n\u003cli\u003eFit by a qualified person in line with current wiring regulations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096713851168,"sku":"999009","price":20.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999009-1.webp?v=1785768882"},{"product_id":"led-strip-power-supply-12v-2a","title":"12V 2A LED Strip Light Power Supply UK Plug | Ledison","description":"\u003cp\u003eThis wall-mounted power supply unit delivers a constant 12V output at 2A to run LED strip lighting safely from the mains. It is certified for domestic use and ships with the plug type matching your country, including UK, US or EU versions.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 12V constant voltage (C.V) at 2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug type\u003c\/strong\u003e, supplied to match your country: UK, US or EU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, non-dimmable, fixed output only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, certified for safe domestic use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, wall-mounted unit with lead and plug\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to powering 12V LED strip lighting in homes, from under-cabinet runs in a kitchen to accent lighting around a shelf or alcove. Because it is a fixed, non-dimmable supply, it works best where the strip itself handles any colour or brightness control, or where a constant level of light is wanted.\u003c\/p\u003e\u003ch3\u003eChoosing the right plug\u003c\/h3\u003e\u003cp\u003eThe adaptor is supplied to suit the country you are ordering from, so a UK order arrives with a UK three-pin plug, while US and EU customers receive the corresponding plug for their region.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e12V 2A power supply unit with mains lead and plug\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52097078526240,"sku":"002892","price":9.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002892-1.webp?v=1785769916"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/led-strip-power-supplies.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}