{"title":"Accessories","description":"\u003cp\u003eThis category covers the components that make an LED installation work as intended rather than just light up: microwave and daylight sensors, dimmer switches, LED drivers and power supplies, and sockets and switches. It's the shelf trade installers turn to when a fitting needs controlling, dimming or triggering automatically.\u003c\/p\u003e\u003cp\u003eDrivers range from standard constant current units to 1-10V and DALI dimmable and DMX types, giving you precise control over output where a project calls for it. Sensor options include microwave presence detectors and daylight photocells, with compact and Eco versions available for tighter spaces or lower budgets.\u003c\/p\u003e\u003cp\u003eBecause these parts have to match the fitting they're paired with, the range spans multiple brands and specifications. Check driver current and voltage, sensor wattage rating and switch type against your existing setup before ordering.\u003c\/p\u003e","products":[{"product_id":"hytronik-hc430s-microwave-sensor","title":"Hytronik HC430S Attachable Microwave Sensor On\/Off","description":"\u003cp\u003eThe Hytronik HC430S is an attachable microwave sensor with an on\/off switching function, built for fitting to the outside of commercial light fittings. It's intended for cases where a metallic body or louvre on the fixture would otherwise block microwave detection.\u003c\/p\u003e\u003cp\u003eAn optional external metal conduit can be added to extend the plastic conduit, useful where the recessed metal wall area is too thick for the standard conduit to pass through while keeping IP65 protection.\u003c\/p\u003e\u003ch2\u003eKey features of this microwave sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating voltage\u003c\/strong\u003e, 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitched power\u003c\/strong\u003e, Max. 400W (capacitive), Max. 800W (resistive)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby power\u003c\/strong\u003e, 0.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection area\u003c\/strong\u003e, 10\/30\/50\/75\/100%, can be customised\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold time\u003c\/strong\u003e, 5s\/30s\/180s\/300s\/15min\/25min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP20 \u0026amp; IP65\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eDesigned for commercial light fittings where the sensor needs to sit outside the fixture body. Three settings are adjustable on site: the detection area, the hold time, and the sensitivity of the photocell, so it can be tuned to the space it's controlling.\u003c\/p\u003e\u003ch3\u003eDetection and mounting\u003c\/h3\u003e\u003cp\u003eThe sensor works on microwave motion detection rather than passive infrared, letting it see through non-metallic housings. Detection range, angle and mounting height are all listed in the specification table below for reference during installation.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52049599430944,"sku":"HC430S\/R","price":43.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-hc430s-r-1.webp?v=1785330344"},{"product_id":"dali-led-driver-25w-meanwell","title":"DALI Dimmable LED Driver 25W Constant Current | Meanwell LCM-25DA","description":"\u003cp\u003eThe Meanwell LCM-25DA is a constant current LED driver with a built-in DALI interface, designed for lighting designers and installers who need flexible dimming control in a compact footprint. Input and output connections sit on one side of the unit, which makes it straightforward to fit into restricted spaces.\u003c\/p\u003e\u003ch2\u003eDALI LED driver with multi-stage output\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming control\u003c\/strong\u003e, built-in DALI interface with push dimming, plus 0-10Vdc and PWM signal dimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, multi-stage current output, selectable via built-in DIP switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, universal input of 180V to 277VAC with active power factor correction (PFC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming curve\u003c\/strong\u003e, logarithmic or linear curve selectable, meeting IEC62386-207.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynchronisation\u003c\/strong\u003e, can be synchronised with up to 10 LCM-25D units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit, over voltage and over temperature protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild and certification\u003c\/h2\u003e\u003cp\u003eThe driver is housed in a fully isolated plastic case and is cooled by free air convection, so no fan or heatsink is required. It is a Class II power unit with no functional earth connection, and no-load power consumption stays below 0.5W. Certification covers ENEC EN61347-2-13, EN62384, UL8750 and IEC2386-101 for worldwide use.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis driver is intended for indoor LED lighting installations where DALI dimming control is required, from architectural fittings to commercial lighting schemes. Part number LCM-25DA. Meanwell backs the unit with a 5 year warranty.\u003c\/p\u003e","brand":"Meanwell","offers":[{"title":"Default Title","offer_id":52053861073184,"sku":"770010","price":25.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770010-1.webp?v=1785421304"},{"product_id":"led-dimmer-switch-varilight-vcom","title":"1 Gang LED Dimmer Switch 15-220W | Varilight V-Com Commercial","description":"\u003cp\u003eThe Varilight V-Com Commercial series is a 1 gang programmable intelligent dimmer switch for LED lighting, rated 15-220W and suitable for up to 26 LEDs. It uses a push-on\/push-off switch action with rotary dimming, giving leading edge dimming performance across a wide brightness range.\u003c\/p\u003e\u003ch2\u003eKey features of this LED dimmer switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad range\u003c\/strong\u003e, 15-220W, max 26 LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Com intelligent dimming technology\u003c\/strong\u003e for controlling large LED lighting loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start feature\u003c\/strong\u003e with intelligent overload protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable minimum brightness\u003c\/strong\u003e to optimise dimming performance for LED lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeading edge dimming\u003c\/strong\u003e for a smooth minimum to maximum brightness range without flicker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable white plastic\u003c\/strong\u003e construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis dimmer switch is suited to LED ceiling panels, LED tubes T8 and T5, downlighters, spotlights and bulbs. It's designed for larger dimmable LED loads than the Professional series push-on\/off dimmers, which suit lower loads up to 100W per gang and a maximum of 10 dimmable LEDs.\u003c\/p\u003e\u003ch3\u003eSoft start and thermal protection\u003c\/h3\u003e\u003cp\u003eSoft Start Technology brings the LED lamps up to brightness gradually rather than switching straight to full output. Thermal protection cuts power to the dimmer if it overheats from an overloaded circuit, protecting the unit from damage.\u003c\/p\u003e\u003ch2\u003eWhy choose the V-Com Commercial series\u003c\/h2\u003e\u003cp\u003eThe V-Com Commercial series is designed to meet current European Safety Legislation and offers adjustable minimum brightness, useful where LEDs still appear too bright at the lowest dimmer setting.\u003c\/p\u003e","brand":"Varilight","offers":[{"title":"Default Title","offer_id":52053861531936,"sku":"KQP221W","price":34.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-kqp221w-1.webp?v=1785421439"},{"product_id":"rotary-panel-dimmer-1-10v","title":"Rotary Panel Constant Voltage Dimmer 1-10V | Ledison","description":"\u003cp\u003eThis rotary panel dimmer gives you a 1-channel 0-10V\/1-10V output for controlling constant voltage LED drivers from a single knob. It takes a high voltage AC input and switches via a high voltage AC relay output, so it wires straight into an existing lighting circuit without extra control gear.\u003c\/p\u003e\u003ch2\u003eKey features of this 1-10v dimmer\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 1 channel 0-10V\/1-10V signal, for connection to a 0\/1-10V dimmable driver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\/output\u003c\/strong\u003e, high voltage AC input with high voltage AC relay output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl method\u003c\/strong\u003e, rotate the knob to change brightness, with push and long-push operation supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote compatibility\u003c\/strong\u003e, works with Skydance's 2.4G dimming remote control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKnob function\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush\u003c\/strong\u003e, turns the light on or off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotate\u003c\/strong\u003e, adjusts brightness across 2.5 turns, giving 50 levels once the light is on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong push (1-5s)\u003c\/strong\u003e, continuous adjustment across 256 brightness levels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFit this panel dimmer wherever a wall-mounted rotary control is wanted for constant voltage LED drivers running on a 0-10V or 1-10V dimming signal. It suits domestic and commercial rooms where a simple manual control point is preferred over an app or remote, while still allowing pairing with a Skydance 2.4G remote for extra flexibility.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096610205984,"sku":"201010","price":18.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-201010-1.webp?v=1785761702"},{"product_id":"triac-dimmable-led-driver-45w","title":"45W AC Triac Dimmable LED Driver 230V Constant Current | Euchips","description":"\u003cp\u003eThe Euchips EUP45T-1WMC-0 is a constant current mode LED driver built for indoor lighting that needs smooth, flicker-free dimming. It runs from a 230V AC mains supply and works with both leading-edge (Triac) and trailing-edge (ELV) dimmers, so it drops into most existing dimming setups without extra gear.\u003c\/p\u003e\u003ch2\u003eConstant current led driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable output current\u003c\/strong\u003e, 500\/700\/900\/1050mA, set via the built-in DIP switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimmer compatibility\u003c\/strong\u003e, works with leading-edge (Triac) and trailing-edge (ELV) dimmers, including systems from Philips, Panasonic, Lutron, Simon, ABB and Siemens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 40VAC to 240VAC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 87%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, built-in active PFC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, Class 2 power supply with a fully protective plastic enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit, overload and over-temperature protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to indoor LED fittings that need reliable dimming, such as downlights, spotlights and panel lights. The DIP switch current selection means one driver can cover several fitting types on a job, cutting down the number of SKUs an installer needs to stock.\u003c\/p\u003e\u003ch3\u003eDimming performance\u003c\/h3\u003e\u003cp\u003eSmooth, flicker-free operation across the stated dimming range makes it a straightforward swap where an existing Triac or ELV dimmer needs to control constant current LED loads.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52096610271520,"sku":"770022","price":25.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770022-1.webp?v=1785761712"},{"product_id":"constant-current-led-driver-60w-1-10v","title":"60W LED Driver 1-10V Constant Current Dimmable | Euchips EUP60A-1HMC-1","description":"\u003cp\u003eThe Euchips EUP60A-1HMC-1 is a 60W constant current LED driver built for indoor lighting where dimming needs to be smooth and dependable. Output current is selectable by DIP switch, so one driver can be matched to different luminaires without swapping parts.\u003c\/p\u003e\u003ch2\u003eKey features of this constant current LED driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, selectable via DIP switch: 1050mA \/ 9-58VDC \/ 60.9W, 1200mA \/ 9-50VDC \/ 60W, or 1400mA \/ 9-43VDC \/ 60.2W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 1-10V active signal, PWM signal, or adjustable resistance (3-in-1 control)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 86%, with built-in active PFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull output fallback\u003c\/strong\u003e, runs at 100% output when no dimming signal is connected, so it can also work as a standard power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, over voltage, short circuit and over power protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 200V to 240V AC, 50\/60Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis driver suits downlights, panel lights and similar indoor LED fittings in offices, retail spaces, residential interiors and commercial projects. Because the current can be reset through the DIP switch, it also works well for maintenance and replacement work where the original driver's output needs matching.\u003c\/p\u003e\u003ch3\u003eSetting the current\u003c\/h3\u003e\u003cp\u003eThe default factory setting is 1050mA with both DIP switches in the OFF position, according to the current select table in the manual. Installers can move between the three current settings to suit the luminaire being driven.\u003c\/p\u003e\u003ch2\u003eTechnical overview\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel \/ item code: EUP60A-1HMC-1\u003c\/li\u003e\n\u003cli\u003eMaximum output voltage: 95VDC\u003c\/li\u003e\n\u003cli\u003eCurrent accuracy: ±5%\u003c\/li\u003e\n\u003cli\u003eOutput LF current ripple: 4%\u003c\/li\u003e\n\u003cli\u003ePower factor: ≥0.9, THD ≤15%\u003c\/li\u003e\n\u003cli\u003eDimensions: 203.4 x 53.9 x 32.6mm, gross weight 365g\u003c\/li\u003e\n\u003cli\u003eWorking temperature: -20°C to 40°C, relative humidity 20 to 90% RH\u003c\/li\u003e\n\u003cli\u003eChannels: 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52096610304288,"sku":"770259","price":35.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770259-1.webp?v=1785761732"},{"product_id":"gold-double-switched-socket-13a","title":"13A 2-Gang Switched Socket Gold Brushed Metallic | Ledison","description":"\u003cp\u003eThis 13A 2-gang switched socket comes in a gold brushed metallic finish, giving a raised slim profile that suits both period and modern interiors. It fits a standard 40mm back box and uses angled in-line terminals with backed-out captive screws, making it straightforward to wire and fit.\u003c\/p\u003e\u003ch2\u003eKey features of this gold double switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 13A switched socket, 2-gang.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety shutter\u003c\/strong\u003e, operated by the earth pin of the plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching contact gap\u003c\/strong\u003e, minimum 3mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised slim profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires 40mm back box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, angled in-line terminals with captive screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing\u003c\/strong\u003e, twin earth fitted as standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRockers\u003c\/strong\u003e, outboard rockers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe angled in-line terminals and captive screws make this a practical retrofit option where an existing socket is being swapped for a gold finish. The slim raised profile keeps the plate close to the wall once fitted, and the twin earth as standard means it can be wired into most domestic ring circuits without extra parts.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096610337056,"sku":"102221","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102221-1.webp?v=1785761744"},{"product_id":"varilight-v-pro-1-gang-led-dimmer","title":"Varilight V-Pro 1 Gang LED Dimmer Switch | Brushed Steel JSP401","description":"\u003cp\u003eThe Varilight V-Pro JSP401 is a 1 gang, 1 or 2 way dimmer switch finished in brushed steel. It handles a single LED lighting load of 0-120W, covering up to 10 LEDs, and is built with a push-on-off button paired with a rotary dimming control.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e, 1 x 0-120W (1-10 LEDs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming type\u003c\/strong\u003e, trailing-edge and leading-edge control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl style\u003c\/strong\u003e, push-on-off button with rotary dimmer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable minimum brightness\u003c\/strong\u003e, set in three steps to suit the room, with a detailed data sheet included in the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e, brushed steel, 1 gang\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eV-Pro is built for the wide majority of dimmable LEDs on the market, and it also works with halogen and incandescent lighting and dimmable transformers where no minimum load is required. Varilight state that for a given LED load, their dimmers offer the best performance available.\u003c\/p\u003e\u003ch2\u003e2-way and 3-way circuits\u003c\/h2\u003e\u003cp\u003eThis dimmer is a 2-way switch, meaning it can be paired with a standard 2-way switch so a lighting point is controlled from two locations. It cannot itself be dimmed from two locations. For 3-way switching an intermediate switch is needed in the circuit. Where dimming from multiple locations is required, Varilight's Touch and Multipoint Touch range is the better fit, and the V-Pro Multipoint Touch system allows the same light or lights to be dimmed from several places.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits a 25mm deep wall box\u003c\/li\u003e\n\u003cli\u003eClean the metal surface with a microfibre cloth\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Varilight","offers":[{"title":"Default Title","offer_id":52096610664736,"sku":"JSP401","price":29.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-jsp401-1.webp?v=1785761777"},{"product_id":"constant-current-led-driver-33w","title":"LED Driver Constant Current 33.6W IP67 33-48VDC | Glacial GP-HS35P-48C","description":"\u003cp\u003eThe Glacial GP-HS35P-48C is a constant current LED driver rated at 33.6 watts, supplying a variable voltage output from 33 to 48Vdc. It suits LED spots, downlights, panels and general LED arrays that need a steady current supply.\u003c\/p\u003e\u003ch2\u003eKey features of this constant current LED driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, universal AC input 90~305VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation\u003c\/strong\u003e, constant voltage \/ constant current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e, for high brightness light-emitting diode products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFC\u003c\/strong\u003e, built-in power factor correction function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, fully isolated plastic case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtections\u003c\/strong\u003e, OVP \/ SCP \/ OTP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperating conditions\u003c\/h2\u003e\u003cp\u003eThe driver runs at full load across an operating range of -20°C to 50°C. It is classed as a Class 2 power supply unit and carries an IP67 rating, making it suitable for waterproof installations.\u003c\/p\u003e\u003ch3\u003eDimensions\u003c\/h3\u003e\u003cp\u003eThe unit measures 110 x 73.5 x 33 mm (L x W x H).\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFit this driver where LED spots, downlights or panels need a constant current supply across a 33-48Vdc range, indoors or in wet locations thanks to the IP67 housing.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096611090720,"sku":"GP-HS35P-48C","price":30.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-gp-hs35p-48c-1.webp?v=1785761833"},{"product_id":"led-touch-dimmer-switch-triac","title":"LED Touch Dimmer Switch AC Triac 100-240V | Ledison S1-T","description":"\u003cp\u003eThe Ledison S1-T is a touch glass panel dimmer switch built around an AC Triac circuit, designed to control dimmable LED, halogen and incandescent lighting. Input and output are both AC100-240V, and brightness is set using a virtual sliding bar on the tempered glass front.\u003c\/p\u003e\u003ch2\u003eLED touch dimmer switch features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel\u003c\/strong\u003e, S1-T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming control\u003c\/strong\u003e, touch slide plus RF 2.4GHz wireless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming levels\u003c\/strong\u003e, 256 levels across a 0-100% range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, max 1.2A, 120W \/ 288W output power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming type\u003c\/strong\u003e, leading edge or trailing edge, selected via an internal DIP switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad compatibility\u003c\/strong\u003e, dimmable LED, halogen and incandescent lamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTouch panel and RF control\u003c\/h2\u003e\u003cp\u003eThe glass surface responds to touch on a central sliding bar and includes backlighting so the panel stays visible in low light. Paired with a compatible Skydance remote, the dimmer can be switched on and off or adjusted in brightness from up to 30 metres away, which suits both home and commercial rooms where a wall switch is not always convenient to reach.\u003c\/p\u003e\u003ch2\u003eInstallation and build\u003c\/h2\u003e\u003cp\u003eWiring uses standard AC live and neutral connections along with the LED output wiring, and the unit fits a standard European 86-size back box. The dimmer measures 86 x 86 x 36.5mm and carries an IP20 rating, so it is intended for indoor, dry locations only.\u003c\/p\u003e\u003ch2\u003eCertifications and operating range\u003c\/h2\u003e\u003cp\u003eThe S1-T is CE marked and meets EMC and LVD requirements, including EN55015, EN61547 and EN61347. It operates across a -30°C to +55°C range and is covered by a 5-year manufacturer warranty.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096611451168,"sku":"201000","price":29.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-201000-1.webp?v=1785761998"},{"product_id":"led-triac-driver-58w-dimmable","title":"AC Triac LED Driver 58W IP66 Mains Dimmable | Ledison","description":"\u003cp\u003eThis 58W AC Triac LED driver gives a constant current output for indoor LED fittings that need mains dimming. It is IP66 rated and housed in an aluminium enclosure, with one side wired to the mains supply and the other feeding DC voltage to the connected LED array.\u003c\/p\u003e\u003ch2\u003eConstant current led driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e, 58W rated output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 25-42Vdc, 1400mA constant current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 180-240VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, 0.95 P.F. with active power factor correction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak efficiency\u003c\/strong\u003e, 90% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, TUV, CE and EMC certified for indoor lighting use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimmer compatibility\u003c\/h2\u003e\u003cp\u003eBuilt to work smoothly with trailing edge and leading edge switches, this driver has been tested with Varilight Vcom, Varilight VPro, Lutron dimmers and the Clipsal C-Bus system. It suits installations where a single driver needs to pair with a range of existing wall dimmers.\u003c\/p\u003e\u003ch2\u003eMechanical dimensions\u003c\/h2\u003e\u003cp\u003eThe unit measures 200 x 70 x 46mm and weighs 0.9kg. Other output versions of this driver are available on request.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cp\u003eSuited to indoor LED lighting projects that call for constant current dimming, including retrofits where an existing triac dimmer needs to stay in place.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096611778848,"sku":"770013","price":32.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770013-1.webp?v=1785762015"},{"product_id":"microwave-motion-sensor-bluetooth","title":"Hytronik Microwave Motion Sensor HC005\/BT | Bluetooth Control 400W","description":"\u003cp\u003eThe Hytronik HC005\/BT is a microwave motion sensor that switches LED lighting on and off using Bluetooth, with control from a mobile phone via the Koolmesh app. It works with single fittings or in groups using the 5.0 SIG Mesh Application, removing the need for hardwired switching between luminaires.\u003c\/p\u003e\u003ch2\u003eHow the microwave motion sensor works\u003c\/h2\u003e\u003cp\u003eThe sensor detects movement and turns lighting on, switching off again once a pre-selected hold time has passed with no motion detected. A built-in daylight sensor can also disable the light when there is enough natural light in the space, and this photocell function can be switched on or off as needed.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection range\u003c\/strong\u003e, 10 metres, with a coverage area of 10m x 30m indoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold time\u003c\/strong\u003e, adjustable from 5 seconds to 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotocell\u003c\/strong\u003e, integrated daylight sensor, can be enabled or disabled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, loop-in and loop-out terminals for straightforward installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching circuit\u003c\/strong\u003e, zero-crossing detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBluetooth app control\u003c\/h2\u003e\u003cp\u003eSetup and commissioning is handled through the Koolmesh app, which also supports grouping luminaires into a mesh network, three scene types, detailed sensor settings, scheduling by time and date, and an astro timer for sunrise and sunset. The system retains settings after a power loss, supports offline commissioning and network sharing, and can receive firmware updates over the air.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuitable for typical indoor spaces such as offices, classrooms, car parks, warehouses and other commercial or industrial areas where wireless lighting control is preferred over hardwired switching.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096611844384,"sku":"112005","price":49.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112005-1.webp?v=1785762026"},{"product_id":"microwave-motion-sensor-detachable-antenna","title":"Hytronik HC009S-KD Microwave Motion Sensor with Detachable Antenna","description":"\u003cp\u003eThe Hytronik HC009S-KD is a microwave motion sensor built for light fittings where space is tight, such as LED bulkheads, 2D lamps and LED tubes. It gives a 220-240V output signal with on\/off and dimming function, and detects movement across a 1-16m area. The antenna detaches from the sensor body, so only the small antenna needs to sit on the outer surface of the fitting while the sensor body and driver stay hidden behind the panel.\u003c\/p\u003e\u003cp\u003eMetal louvres on linear office lights block microwaves, which is a common problem for fittings with this kind of grille. The detachable antenna gets around this: clamp it onto a T5 or T8 tube on the outside of the fixture, and keep the sensor's main body behind the metal plate.\u003c\/p\u003e\u003ch2\u003eKey features of this microwave motion sensor light switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 220-240V, with on\/off and dimming function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection area\u003c\/strong\u003e, 1-16m, adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable antenna\u003c\/strong\u003e, clamps onto T5 and T8 tubes, separate from the sensor body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor principle\u003c\/strong\u003e, microwave motion detector, 5.8GHz +\/- 75MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to fittings where a full-size sensor won't fit inside the housing: LED bulkheads, 2D lamps and LED tubes, particularly in office lighting with metal louvred diffusers that would otherwise block microwave detection.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096611975456,"sku":"112018","price":52.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112018-1.webp?v=1785762033"},{"product_id":"1-10v-led-driver-18w-adjustable","title":"Easeic LNA118AL 18W 1-10V Dimmable LED Driver 200-1050mA","description":"\u003cp\u003eThe Easeic LNA118AL is a constant current LED driver with adjustable output, built for compact luminaires, recessed fittings and architectural lighting. Output current is adjustable from 200mA to 1050mA via integrated DIP switches, so installers can set the driver to match the connected LED array.\u003c\/p\u003e\u003ch2\u003eKey features of this 1-10v led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 18W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, 200mA to 1050mA, adjustable by DIP switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum open circuit voltage\u003c\/strong\u003e, under 77V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 0\/1-10V, PWM, resistance and PUSH-Dim, 0 to 100% range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimming and control\u003c\/h2\u003e\u003cp\u003eThree dimming methods are built into one driver: 0\/1-10V, PWM and resistance dimming, alongside PUSH-Dim for switching and dimming from a standard push-button. The analogue dimming curve runs smoothly from 0% to 100% without flicker, which suits offices, hospitality fit-outs, retail spaces and other commercial dimmable lighting.\u003c\/p\u003e\u003ch2\u003eEfficiency and protection\u003c\/h2\u003e\u003cp\u003eEfficiency reaches up to 88%, with a power factor above 0.90 at full load and THD below 10%. The driver includes protection against short circuit, over voltage, over current and open circuit conditions.\u003c\/p\u003e\u003ch2\u003eHousing and installation\u003c\/h2\u003e\u003cp\u003eThe slim housing measures 280 x 30 x 26mm, sized for recessed luminaires, LED panels, battens and other compact fittings where space is tight. Push terminals are fitted to speed up wiring on site. Operating temperature runs from -20°C to +50°C, and the driver carries a UL Damp and Dry environmental rating.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096612303136,"sku":"632118","price":22.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-632118-1.webp?v=1785762074"},{"product_id":"1-10v-led-dimmer-switch-osram","title":"1-10V LED Dimmer Switch Rotary Knob IP20 | Osram DIM MCU","description":"\u003cp\u003eThe Osram DIM MCU is a 1-10V dimmer switch with a rotary knob, designed to control dimmable LED drivers from a single wall-mounted point. It can control up to 50 LED lights and outputs a variable 1-10V signal that feeds directly into the dimmable driver of each connected fitting.\u003c\/p\u003e\u003ch2\u003eHow the 1-10v dimmer switch works\u003c\/h2\u003e\u003cp\u003eThe switch sends a control signal between 1-10V to the input of the LED drivers using a pair of red and black cables. Installers need to run a 4-core cable to set the system up correctly: one core for live, one for neutral, and a pair for the positive and negative control signal. A push on\/off function is built in, letting the installer cut the mains voltage directly at the switch.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDim interface\u003c\/strong\u003e, 1-10V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl output load capacity\u003c\/strong\u003e, max. 40 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad contact\u003c\/strong\u003e, 6 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal voltage\u003c\/strong\u003e, 230 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class\u003c\/strong\u003e, II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType of protection\u003c\/strong\u003e, IP20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eCompatible with Voltacon dimmable LED products including dimmable LED panels, LED T8 and T5 tubes, downlighters and round panels, 30W and 50W low\/high bay LED lights, non-corrosive fittings, and the full range of VOLTALED fittings. The unit installs into a standard flush device box.\u003c\/p\u003e\u003ch3\u003eDimensions and environment\u003c\/h3\u003e\u003cp\u003eThe switch measures 80 mm long, 80 mm wide and 40 mm high, finished in white, and operates within an ambient temperature range of 0 to +50°C at 50-60 Hz.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":52096612532512,"sku":"201023","price":46.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-201023-1.webp?v=1785762090"},{"product_id":"varilight-8-button-remote-dimmer","title":"Varilight V-Pro 8 Button Remote Control for LED Dimmers | YRC8","description":"\u003cp\u003eThe Varilight YRC8 is an 8 button remote control designed as an optional accessory for the V-Pro range of IR touch and touch \u0026amp; remote control dimmers. It gives handheld control over compatible Varilight dimmer switches without needing to reach the wall plate.\u003c\/p\u003e\u003cp\u003eV-Pro dimmers are built for dimmable LED lighting, with each dimmer (or gang on a multi-gang dimmer) able to control between 1 and 10 dimmable LEDs, subject to a maximum load per gang of 100W. The remote is designed to work with most Varilight remote controllers in the V-Pro IQ master remote and touch dimmer range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton layout\u003c\/strong\u003e, 8 button remote for individual control of paired dimmers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with most Varilight V-Pro remote controllers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad per gang\u003c\/strong\u003e, up to 100W, controlling 1 to 10 dimmable LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code\u003c\/strong\u003e, VL YRC8\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes and installations already fitted with Varilight V-Pro touch \u0026amp; remote dimmer switches, where a handheld remote adds convenience for controlling LED lighting from a distance, such as from a sofa or bed.\u003c\/p\u003e\u003ch3\u003eUsing with multi-gang dimmers\u003c\/h3\u003e\u003cp\u003eOn a multi-gang dimmer, each gang can be controlled separately, provided the load per gang stays within the 100W limit.\u003c\/p\u003e","brand":"Varilight","offers":[{"title":"Default Title","offer_id":52096612630816,"sku":"YRC8","price":8.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-yrc8-1.webp?v=1785762098"},{"product_id":"tempered-glass-socket-usb-type-a-c","title":"13A 2-Gang Switched Socket USB Type A \u0026 C | Ledison Tempered Glass","description":"\u003cp\u003eThis 13A 2-gang switched socket combines a tempered glass front plate with two built-in USB charging ports, one Type A and one Type C. It suits homes and offices where extra charging points are needed alongside standard mains sockets, and works well for charging phones, tablets, cameras and MP3 players without an adaptor.\u003c\/p\u003e\u003ch2\u003eKey features of this tempered glass socket\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB ports\u003c\/strong\u003e, one Type A and one Type C, compatible with USB 2.0 and USB 3.0 devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging compatibility\u003c\/strong\u003e, designed for optimum charging across a wide range of devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety\u003c\/strong\u003e, each USB port has an internal safety feature against overload or short circuits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety shutter\u003c\/strong\u003e, operated by the earth pin of the plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching contact gap\u003c\/strong\u003e, minimum 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing\u003c\/strong\u003e, twin earth fitted as standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation details\u003c\/h2\u003e\u003cp\u003eThe socket has a raised slim profile and outboard rockers, with angled in-line terminals and backed-out captive screws for easier fitting. It requires a 40mm back box and is described as an ideal retrofit for existing wiring setups.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to living rooms, bedrooms, kitchens and home offices where mains power and USB charging are needed from a single point. The tempered glass finish gives a plain, modern look that fits alongside other glass-fronted switches and sockets.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096612663584,"sku":"102229","price":18.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102229-1.webp?v=1785762118"},{"product_id":"led-dimmer-switch-3-gang-2way","title":"3 Gang 2 Way LED Dimmer Switch 100W Per Gang | Varilight V-Pro","description":"\u003cp\u003eThis Varilight 3 gang 2 way dimmer switch combines trailing edge (AC triac) dimming with a push-on\/push-off rotary button for each gang. It comes in a white case and each of the three gangs handles a maximum load of 0-100W, suitable for up to 10 LEDs per gang.\u003c\/p\u003e\u003ch2\u003eKey features of this 3 gang dimmer switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGangs\u003c\/strong\u003e, 3 gang, 2 way control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad per gang\u003c\/strong\u003e, 0-100W (10 LEDs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming type\u003c\/strong\u003e, trailing edge AC triac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch action\u003c\/strong\u003e, push-on\/push-off rotary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e, white case\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eV-Pro dimming technology\u003c\/h2\u003e\u003cp\u003eThis switch is part of the V-Pro range, which uses a microprocessor to manage overload protection. If too many lights or transformers are connected, the dimmer turns the load down or off rather than failing outright, then recovers once the load is corrected.\u003c\/p\u003e\u003cp\u003eV-Pro dimmers are built for wider compatibility across dimming modes. Some models in the range use push-on\/push-off rotary dimming, as fitted here, while others offer touch or remote control. Each is tuned to deliver dimming performance suited to its connected load.\u003c\/p\u003e\u003ch2\u003eWhere to use it\u003c\/h2\u003e\u003cp\u003eThis dimmer suits mains lighting circuits and most dimmable electronic transformers. There is no minimum load requirement, so it also works with dimmable low-energy lighting, including many dimmable LED fittings, making it a practical choice where multiple circuits need independent control from one plate.\u003c\/p\u003e","brand":"Varilight","offers":[{"title":"Default Title","offer_id":52096613450016,"sku":"JQP303W","price":60.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-jqp303w-1.webp?v=1785762194"},{"product_id":"led-driver-30w-constant-current","title":"LED Constant Current Driver 30W 650mA | Lifuid LF-GMR030YS650H","description":"\u003cp\u003eThe Lifuid LF-GMR030YS650H is a 30W constant current LED driver delivering 650mA output, built for installation inside the fitting rather than as an external unit. It suits LED tubes, battens, panels and arrays with a DC voltage up to 42Vdc, and runs flicker free.\u003c\/p\u003e\u003ch2\u003eKey features of this constant current LED driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, 30W at 650mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, AC220-240V, with a max input range of AC180-264V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC voltage range\u003c\/strong\u003e, 27-40V\/35-55V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor\u003c\/strong\u003e, Active PFC, PF\u0026gt;0.95@AC230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 89%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD\u003c\/strong\u003e, ≤20%\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild and protection\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase\u003c\/strong\u003e, linear metal case, non-dimmable version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation\u003c\/strong\u003e, isolated driver designed for class I LED luminaires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge protection\u003c\/strong\u003e, L-N: 2KV, L\/N-GND: 4KV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal lifetime\u003c\/strong\u003e, above 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e, 20 x 2.5 x 3.0 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFitted inside LED tri-proof lights and other linear LED fittings, this driver replaces a faulty unit without needing to swap the whole fixture. That keeps a working light body in service and cuts down on electronic waste. It meets ERP standards once installed inside a finished LED light.\u003c\/p\u003e","brand":"Lifuid","offers":[{"title":"Default Title","offer_id":52096613908768,"sku":"LF-GMR030YS0650H","price":6.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-lf-gmr030ys0650h-1.webp?v=1785762267"},{"product_id":"3-gang-2-way-light-switch-white","title":"16AX 3-Gang 2-Way Light Switch White | Ledison","description":"\u003cp\u003eA 16AX 3-gang 2-way light switch in white, built for controlling multiple lighting circuits from a single plate. It comes with fixing screws and covers included, ready to fit into a standard back box.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX, suitable for mains voltage lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching\u003c\/strong\u003e, 3-gang 2-way rocker switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised slim profile with a screwed faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 25mm back box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis white light switch suits homes and light commercial spaces where three separate lighting circuits need independent 2-way control, such as a landing with switches at two points or a room with several lighting zones. The screwed faceplate gives a fixed, secure finish once mounted.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eScrew terminals make wiring straightforward for anyone competent with domestic electrics. Fixing screws and a matching cover plate are supplied, so no separate hardware is needed.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16AX 3-gang 2-way light switch, white\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003cli\u003eCover plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096614203680,"sku":"102210","price":12.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102210-1.webp?v=1785762280"},{"product_id":"trailing-edge-led-dimmer-switch-chrome","title":"1 Gang 2 Way Trailing Edge LED Dimmer Switch 400W | Varilight Chrome","description":"\u003cp\u003eThe Varilight V-Pro JCP401 is a 1 gang, 1 or 2 way trailing edge dimmer switch built for silent, flicker-free control of LED lighting. It handles a maximum LED load of 400W and is rated for 1 x 0-120W up to 10 LEDs. The finish plate is chrome plate on stainless steel, and the switch is made in the UK.\u003c\/p\u003e\u003ch2\u003eKey features of this trailing edge dimmer switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e, maximum LED load of 400W, 1 x 0-120W covering up to 10 LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWay configuration\u003c\/strong\u003e, 1 gang, works as 1 or 2 way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e, chrome plate on stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation\u003c\/strong\u003e, completely silent, trailing edge control for smooth and flicker-free dimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft starter\u003c\/strong\u003e, linear increase of voltage to the lamp, intended to extend LED life span\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture\u003c\/strong\u003e, designed and made in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis switch works with leading edge and trailing edge dimming loads, dimmable CFL, dimmable mains LED, dimmable LED lights with external drivers, and very low wattage CFL or incandescent lamps.\u003c\/p\u003e\u003ch3\u003eNot suitable for\u003c\/h3\u003e\u003cp\u003eDo not use this dimmer with dimmable ballast or fluorescent tubes.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFit this dimmer switch where a single circuit of dimmable LED lighting needs quiet, stepless control, such as living rooms, bedrooms or hallways wired for either one way or two way switching.\u003c\/p\u003e","brand":"Varilight","offers":[{"title":"Default Title","offer_id":52096614334752,"sku":"JCP401","price":33.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-jcp401-1.webp?v=1785762286"},{"product_id":"tempered-glass-2-gang-socket","title":"13A 2-Gang Switched Socket Tempered Glass | Ledison","description":"\u003cp\u003eThis 13A 2-gang switched socket has a tempered glass front plate and a raised slim profile. It suits retrofit work where a neat, modern finish is wanted over a standard 40mm back box.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 13A 2-gang switched socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e, tempered glass faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety shutter\u003c\/strong\u003e, operated by the earth pin of the plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching contact gap\u003c\/strong\u003e, minimum 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, angled, in-line, with captive screws for easier fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing\u003c\/strong\u003e, twin earth fitted as standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRockers\u003c\/strong\u003e, outboard style\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe socket requires a 40mm back box. Captive screws are backed out from the terminals, so there's no fumbling with loose screws during fitting. The angled in-line terminal layout is designed to make wiring straightforward, particularly in tight back boxes.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to retrofit projects where existing white plastic sockets are being swapped for a glass finish, and to new installations where a slim raised profile is preferred. Works well in kitchens, living rooms and hallways where the socket is on show.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096614465824,"sku":"102231","price":11.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102231-1.webp?v=1785762309"},{"product_id":"brushed-steel-1-gang-2-way-switch","title":"16AX 1-Gang 2-Way Light Switch Brushed Stainless Steel | Ledison","description":"\u003cp\u003eA 16AX 1-gang 2-way light switch finished in brushed stainless steel. Fitted with a screwed faceplate and a slim raised profile, it suits mains voltage lighting circuits and comes with fixing screws and covers included.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX, suitable for mains voltage lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching\u003c\/strong\u003e, 1-gang 2-way rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e, stainless steel brushed faceplate, screwed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised slim design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections\u003c\/strong\u003e, screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 25mm back box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis brushed steel light switch works well anywhere a plain chrome or plastic switch would look out of place: hallways, living rooms, kitchens, wherever a 2-way lighting circuit needs a single gang control. The screwed faceplate keeps it flush and secure once fitted to a standard 25mm back box.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1-gang 2-way light switch\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003cli\u003eCover plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096615776544,"sku":"102234","price":7.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102234-1.webp?v=1785762488"},{"product_id":"led-driver-microwave-sensor-25w","title":"SensorDIM LED Driver 25W with Microwave Sensor | Hytronik HEC9025","description":"\u003cp\u003eThe Hytronik HEC9025 combines a constant current LED driver and a microwave motion sensor in a single unit, built for LED lights and LED boards up to 25 watt. Corridor function dimming and adjustable current levels let it match a range of fittings without extra control gear.\u003c\/p\u003e\u003ch2\u003eKey features of this led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor and driver 2-in-1\u003c\/strong\u003e, one unit handles detection and dimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 step dimming\u003c\/strong\u003e, corridor function for stepped light output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED current selection\u003c\/strong\u003e, adjustable current levels for different loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED max load and voltage\u003c\/strong\u003e, rated for LED lights and boards up to 25 watt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient daylight threshold\u003c\/strong\u003e, reacts to surrounding light levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 hour manual on mode\u003c\/strong\u003e, override for continuous operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to corridors, stairwells and similar spaces where a microwave motion sensor light switch and driver combination reduces the need for separate control units. The corridor function keeps a low light level between full detections rather than switching off completely.\u003c\/p\u003e\u003ch3\u003eDetection and control\u003c\/h3\u003e\u003cp\u003eSensing and dimming settings are adjustable, so the hold time, detection area and daylight threshold can be set to suit the installation once fitted.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096618594592,"sku":"112010","price":45.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112010-1.webp?v=1785762701"},{"product_id":"dali-bus-power-controller-module","title":"DALI Bus Management Module 2 Channel 64 Address | Easeic DBC202D","description":"\u003cp\u003eThe Easeic DBC202D is a 2 channel DALI bus management module built to control up to 128 addressable LED drivers across two independent DALI lines of 64 addresses each. It gives installers a compact way to run scene based lighting control without a full building management system, and works as an alternative to systems such as the Lutron Grafik Eye.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels\u003c\/strong\u003e, 2 channel DALI bus management, each channel handling 2 x 64 independent DALI addresses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSI mode\u003c\/strong\u003e, can drive 2 x 25 DSI protocol LED drivers when switched to DSI operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay outputs\u003c\/strong\u003e, 2 channel passive relay output rated 2A per channel, switching the main power to slave equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus power\u003c\/strong\u003e, integrated 2 x 250mA DALI bus power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol\u003c\/strong\u003e, compliant with IEC62386, supporting slave state feedback and single, group or all-slave control on the same bus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScenes\u003c\/strong\u003e, up to 99 predefined lighting scenes across 99 areas with 16 lighting effects, named and edited through the LCD display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial and residential installations where multiple DALI or DSI LED drivers need to be grouped, scened, or switched manually. The manual on\/off override lets an installer or user operate the slave equipment directly at any time, independent of the programmed scenes.\u003c\/p\u003e\u003ch3\u003eStatus and display\u003c\/h3\u003e\u003cp\u003eAn LED status indicator shows operating state in red or green as standard, with other colours available. The LCD dynamic display is used to name and manage each scene or area.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096620527904,"sku":"999015","price":417.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999015-1.webp?v=1785762768"},{"product_id":"motion-sensor-led-driver-18w","title":"Microwave Motion Sensor LED Driver 18W IP20 | Hytronik HEC6018","description":"\u003cp\u003eThe Hytronik HEC6018 combines a microwave motion sensor and a constant current LED driver in a single casing, rated to power LED arrays and light fittings up to 18 watts. The output runs at 500mA, and a built-in daylight sensor is wired ahead of the motion sensor so the fitting only switches on when it is actually needed.\u003c\/p\u003e\u003ch2\u003eMotion sensor LED driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaylight threshold\u003c\/strong\u003e, selectable, so the driver ignores motion when there is already enough ambient light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-step dimming\u003c\/strong\u003e, 100%, dimmed, off, giving a light change notice before full switch-off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED max. load\u003c\/strong\u003e, 18W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection radius\u003c\/strong\u003e, 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection height\u003c\/strong\u003e, 5m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eHytronik designed this driver for office spaces, meeting rooms and classrooms, where motion hold-time and a stand-by period can be set to suit occupancy patterns. The daylight threshold and detection area are both adjustable, so the same driver can be tuned to different rooms.\u003c\/p\u003e\u003ch3\u003eTiming and standby control\u003c\/h3\u003e\u003cp\u003eTwo selectable waiting periods are available: motion hold-time and a stand-by period. This lets an installer set how long the light stays at full output after movement stops, and how it dims down before switching off completely.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe sensor\/driver measures 119 x 53 x 26mm, a slim and compact shape that fits inside most light fixtures and LED fittings.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096622821664,"sku":"112006","price":38.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112006-1.webp?v=1785762817"},{"product_id":"dali-dimmable-led-driver-63w","title":"DALI Dimmable Constant Current LED Driver 63W 240V | Euchips","description":"\u003cp\u003eThe Euchips DALI Constant Current Dimming Driver delivers 63W at 240V with an adjustable output current from 1050mA to 1400mA, set via DIP switch. Housed in a metal casing, it is built for indoor LED fittings that need DALI-based dimming control.\u003c\/p\u003e\u003ch2\u003eKey features of this DALI driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, adjustable between 1050mA and 1400mA, selected by DIP S.W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol compliance\u003c\/strong\u003e, meets DALI Protocol IEC 62386\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming support\u003c\/strong\u003e, compatible with Touch DIM dimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD\u003c\/strong\u003e, 10% or lower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 86%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, over-voltage, short circuit and over power protection built in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to indoor LED lighting such as down lights and panel lights, wherever a single-channel constant current output with DALI dimming is needed. The driver's low ripple current output helps avoid visible flicker at low dim levels.\u003c\/p\u003e\u003ch3\u003eBuild and construction\u003c\/h3\u003e\u003cp\u003eThe metal casing houses an active PFC circuit alongside the constant current output stage, keeping the unit compact for fitting into luminaire housings or remote enclosures.\u003c\/p\u003e\u003ch2\u003ePart reference\u003c\/h2\u003e\u003cp\u003eSold under part number EUP60D-1HMC-0.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52096623771936,"sku":"770019","price":34.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770019-1.webp?v=1785762845"},{"product_id":"led-dimmer-switch-2-gang-250w","title":"LED Dimmer Switch 2-Gang 250W | Varilight V-Pro","description":"\u003cp\u003eA 2-gang LED dimmer switch from the Varilight V-Pro range, built for wide compatibility with LED loads and rated at 250W per gang. It combines a push on-off button with a rotary dimming control, so switching and dimming are separate, deliberate actions rather than one fiddly dial.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax load\u003c\/strong\u003e, 250W per gang\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl\u003c\/strong\u003e, push-on-off button with rotary dimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum brightness adjustment\u003c\/strong\u003e, set in three steps to match the room, with a detailed data sheet included in the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e, Satin Brass face with Polished Chrome edge and polished chrome rockers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e, Dark Smooth Stepped with Flat Edge, LED Period Dark stepped edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e, 86mm x 86mm x 22mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to modern interiors where a slim-line, dual-colour switch plate fits the rest of the room's hardware. Because it is built for LED loads specifically, it gives more even, flicker-free dimming than a dimmer designed around old filament bulbs. It works well anywhere a single plate needs to control two separate LED circuits, such as a living room with two lighting zones or a kitchen with under-cabinet and ceiling LEDs on the same plate.\u003c\/p\u003e\u003ch3\u003eGang options\u003c\/h3\u003e\u003cp\u003eThis listing covers the 2-gang version. The same V-Pro range is also available as 1\/2 Gang on a single plate and as 3\/4 Gang on a double plate, so matching plates can be fitted across a room with different circuit counts.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLedison V-Pro 2-Gang LED Dimmer Switch\u003c\/li\u003e\n\u003cli\u003eDetailed data sheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Varilight","offers":[{"title":"Default Title","offer_id":52096625246496,"sku":"DIM2GDSBLED","price":60.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-dim2gdsbled-1.webp?v=1785762893"},{"product_id":"rgb-cct-remote-dimmer-switch","title":"4 Zone RGB+CCT Wireless Remote Dimmer Switch T25 | Ledison","description":"\u003cp\u003eThis wall mount remote control dimmer switch runs without wiring, powered by 2 AAA batteries. It sends a 2.4GHz radio frequency signal to control 5 in 1 RGB+CCT LED strips across 4 separate zones, with no cabling needed for installation.\u003c\/p\u003e\u003ch2\u003eKey features of this remote control dimmer switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch panel\u003c\/strong\u003e, 4 zone control for RGB + CCT colours (5 in 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless operation\u003c\/strong\u003e, each zone controlled remotely without wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass panel\u003c\/strong\u003e, tough touch glass with a coloured slider for colour adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch keys\u003c\/strong\u003e, audible tones and LED indicators on each key press\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e, no wiring required, panel is removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish options\u003c\/strong\u003e, available in white or black glass panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eElectrical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput signal: 2.4GHz\u003c\/li\u003e\n\u003cli\u003eWorking voltage: AAA batteries, 1.5V x 2\u003c\/li\u003e\n\u003cli\u003eCurrent draw: less than 5mA\u003c\/li\u003e\n\u003cli\u003eStandby current: less than 20uA\u003c\/li\u003e\n\u003cli\u003eNet weight: 156gr\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe unit measures 86 x 86 x 33mm and fits standard wall mount positions without the need for a wired connection to the mains.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes and installations already using 5 in 1 RGB+CCT LED strips, where a wall mounted control point is wanted but running new cable is impractical. The battery power and RF signal mean it can be positioned on almost any wall or surface.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"White","offer_id":52096626327840,"sku":"201030","price":27.02,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":52096626360608,"sku":"201031","price":27.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-201030-1.webp?v=1785762935"},{"product_id":"led-dimmer-switch-2-gang-brushed-steel","title":"LED Dimmer Switch 2 Gang 2x120W Brushed Steel | Varilight V-Pro JSP252","description":"\u003cp\u003eThe Varilight V-Pro JSP252 is a 2 gang, 1 or 2 way dimmer switch finished in brushed steel. Each gang handles LED loads from 0W to 120W, up to 10 LEDs, giving a combined 2 x 120W across the switch.\u003c\/p\u003e\u003ch2\u003eKey features of this led dimmer switch 2 gang\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad range\u003c\/strong\u003e, 0W to 120W per gang, trailing-edge and leading-edge, up to 10 LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl type\u003c\/strong\u003e, push-on-off button with rotary dimming control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum brightness\u003c\/strong\u003e, adjustable to match the room, set in three steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, dimmable LEDs, halogen, incandescent lights and dimmable transformers with no minimum load required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e, brushed steel, 2 gang\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWiring and circuits\u003c\/h2\u003e\u003cp\u003eThis dimmer works in a 2-way circuit, where one lighting point is controlled from two locations. To set up 2-way switching, pair the V-Pro dimmer with a standard 2-way switch. For a 3-way circuit an intermediate switch also needs to be added. The V-Pro dimmer itself cannot be dimmed from two locations at once; for that, Varilight's Touch and Multipoint Touch range is the better fit.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe switch fits into a 25mm deep wall box, which suits most standard UK installations. A detailed data sheet is included in the box to guide setup and load adjustment.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eKeep the brushed steel surface clean using a microfibre cloth.\u003c\/p\u003e","brand":"Varilight","offers":[{"title":"Default Title","offer_id":52096629702944,"sku":"JSP252","price":41.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-jsp252-1.webp?v=1785763053"},{"product_id":"tempered-glass-light-switch-2-way","title":"16AX 1-Gang 2-Way Light Switch Tempered Glass | Ledison","description":"\u003cp\u003eA 16AX 1-gang 2-way light switch with a tempered glass faceplate in white, from Ledison. It comes supplied with fixing screws and covers, ready to fit into a standard back box.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX, suitable for mains voltage lighting circuits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e, 1-gang 2-way switching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate\u003c\/strong\u003e, tempered glass light switch with a screwed finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised slim design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 25mm back box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation\u003c\/strong\u003e, rocker switch action\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis glass light switch suits homes and rooms where a two-way lighting circuit is needed, such as controlling a landing light from two locations. The tempered glass faceplate gives a clean, modern look against a standard back box, and the screwed fixing keeps the plate secure over time.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1-gang 2-way light switch\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003cli\u003eCovers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096630554912,"sku":"102226","price":9.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102226-1.webp?v=1785763074"},{"product_id":"ottlite-wellness-desk-lamp-wireless-charging","title":"OttLite Wellness LED Desk Lamp with Clock \u0026 Qi Wireless Charging","description":"\u003cp\u003eThe OttLite Wellness Series Desk Lamp combines ClearSun LED technology with a built-in Qi wireless charging pad, a digital clock and a night light in one compact unit. OttLite designed the ClearSun LED to reduce eyestrain by 51%, making it a practical choice for long hours at a desk.\u003c\/p\u003e\u003ch2\u003eKey features of this LED desk lamp\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless charging\u003c\/strong\u003e, an integrated Qi charging pad powers compatible devices, including iPhone 8 and newer, without cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNight light\u003c\/strong\u003e, built into the base, with three adjustable brightness levels controlled by touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour temperature modes\u003c\/strong\u003e, switch between Warm White, Bright White and Natural Daylight to suit the task.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital display\u003c\/strong\u003e, shows a clock, calendar, alarm with snooze, ambient temperature and day of the week.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable neck\u003c\/strong\u003e, the flexible silicon neck adjusts from 15 to 19 inches for precise positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB port\u003c\/strong\u003e, an additional 5V 2.1A port charges phones and tablets alongside the Qi pad.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild and construction\u003c\/h2\u003e\u003cp\u003eThe lamp is made from durable plastic and measures 6.3 inches wide, 10.98 inches long and 13.58 inches high, with a 5.875 inch diameter base for stability on a desk. It weighs 2.75 lbs. Power output is 4.5 watts.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to home offices, bedside tables and study desks where task lighting, a clock and phone charging are all needed in one footprint. The night light function also works as a low-glare option for overnight use.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOttLite Wellness LED Desk Lamp\u003c\/li\u003e\n\u003cli\u003ePower adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCovered by a 2-year parts and labour warranty.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Black","offer_id":52096630915360,"sku":"1649270-B","price":51.45,"currency_code":"GBP","in_stock":false},{"title":"White","offer_id":52096630948128,"sku":"1649270-W","price":51.45,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-1649270-b-1.webp?v=1785763104"},{"product_id":"dali-master-controller-usb","title":"DALI 200 Master Controller USB PC Interface | Euchips","description":"\u003cp\u003eThe DALI 200 Master Controller from Euchips connects to a computer over USB, letting you set up and control DALI-compatible light fittings directly from your PC. It follows the DALI Protocol IEC62386, making it suitable for commissioning and managing DALI lighting installations.\u003c\/p\u003e\u003ch2\u003eKey features of this DALI master controller\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol compliance\u003c\/strong\u003e, meets DALI Protocol IEC62386\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment detection\u003c\/strong\u003e, automatically checks equipment accessible to the master\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddress allocation\u003c\/strong\u003e, automatically allocates short addresses according to the DALI Protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRe-addressing\u003c\/strong\u003e, supports re-addressing of all equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl modes\u003c\/strong\u003e, supports broadcast, single and group address control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParameter access\u003c\/strong\u003e, can set or read all parameters in the DALI Protocol parameter chart, including by groups and scenes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUse this controller to commission and manage DALI lighting systems from a PC. It suits installers setting up multiple DALI-compatible fittings that need short address allocation, group and scene programming, or ongoing parameter checks.\u003c\/p\u003e\u003ch3\u003eDebug support\u003c\/h3\u003e\u003cp\u003eA reserved debug command from the DALI Protocol is included, useful for troubleshooting during commissioning.\u003c\/p\u003e","brand":"Euchips","offers":[{"title":"Default Title","offer_id":52096631341344,"sku":"999014","price":340.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999014-1.webp?v=1785763110"},{"product_id":"tempered-glass-3-gang-light-switch","title":"16AX 3-Gang 2-Way Tempered Glass Light Switch | Ledison","description":"\u003cp\u003eThis 16AX 3-Gang 2-Way Light Switch has a tempered glass faceplate in white, built for mains voltage lighting circuits. It comes with fixing screws and covers included, ready to fit into a standard back box.\u003c\/p\u003e\u003ch2\u003eKey features of this tempered glass light switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate\u003c\/strong\u003e, tempered glass, white finish, screwed fixing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised slim profile design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 25mm back box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch type\u003c\/strong\u003e, rocker switch, 3-gang, 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX, suitable for mains voltage lighting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to any room where three separate lighting circuits need to be controlled from two locations, such as a hallway with stairs or a large living space with multiple light points. The glass faceplate gives a cleaner look than standard plastic plates, and the screwed fixing keeps it flush against the wall.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16AX 3-gang 2-way light switch\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003cli\u003eCover plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096633110816,"sku":"102228","price":12.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102228-1.webp?v=1785763190"},{"product_id":"gold-3-gang-2-way-light-switch","title":"16A 3-Gang 2-Way Light Switch Gold Brushed Metallic Plate | Ledison","description":"\u003cp\u003eA 16AX 3-gang 2-way light switch finished in a gold brushed metallic plate, built for controlling multiple lighting circuits from one position. It comes with a raised slim profile faceplate and is supplied with fixing screws and covers.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX, suitable for mains voltage lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching\u003c\/strong\u003e, 3-gang 2-way rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate\u003c\/strong\u003e, screwed, raised slim profile in gold brushed metallic finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 25mm back box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes or projects where a gold light switch is wanted to match brushed metal fittings elsewhere in the room. The 3-gang 2-way layout allows three separate lighting circuits to be switched from two locations each, useful in hallways, landings or larger rooms with multiple light points.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThe screwed faceplate sits on a 25mm back box and connects via screw terminals. Fixing screws and cover plates are included, so no separate hardware is needed.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16A 3-gang 2-way light switch, gold brushed metallic plate\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003cli\u003eCovers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096634421536,"sku":"102239","price":12.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102239-1.webp?v=1785763258"},{"product_id":"led-dimmer-switch-1-gang-vpro","title":"LED Dimmer Switch 1-Gang 250W Satin Brass | Varilight V-Pro","description":"\u003cp\u003eThe Varilight V-Pro is a programmable LED dimmer switch built for a single gang wall box, rated to 250W. It uses a push-on-off button with a rotary dimming control and works across a wide range of LED loads.\u003c\/p\u003e\u003ch2\u003eKey features of this LED dimmer switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax load per gang\u003c\/strong\u003e, 250W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl type\u003c\/strong\u003e, push-on-off button with rotary dimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum brightness\u003c\/strong\u003e, adjustable in three steps to suit the room\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate finish\u003c\/strong\u003e, Satin Brass face with Polished Chrome edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e, Dark Smooth Stepped with Flat Edge, dual colour metal casing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e, 86mm x 86mm x 22mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis dimmer suits modern interiors where a slim-line, dual colour switch plate is wanted alongside LED lighting. It fits a standard 25mm deep wall box, so it drops into most existing installations without extra chasing.\u003c\/p\u003e\u003ch3\u003e2-way and 3-way circuits\u003c\/h3\u003e\u003cp\u003eFor a 2-way circuit, where one light is controlled from two locations, pair this dimmer with a standard 2-way switch at the other point. A 3-way circuit needs an intermediate switch added to the wiring. Note that this V-Pro dimmer itself is not dimmable from a second location; for that, Varilight's V-Pro Multipoint Touch system is the option to look at.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits a 25mm deep wall box\u003c\/li\u003e\n\u003cli\u003eA detailed data sheet is included in the box\u003c\/li\u003e\n\u003cli\u003eClean the metal surface with a microfibre cloth only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Varilight","offers":[{"title":"Default Title","offer_id":52096634978592,"sku":"DIM1GDSBLED","price":41.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-dim1gdsbled-1.webp?v=1785763327"},{"product_id":"black-1-gang-2-way-light-switch","title":"16AX 1-Gang 2-Way Light Switch Black | Ledison","description":"\u003cp\u003eA 16AX 1-gang 2-way light switch in black, designed for controlling mains voltage lighting from two switching points. Comes complete with fixing screws and covers, ready to fit.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised slim profile faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate\u003c\/strong\u003e, screwed fixing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 25mm back box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch type\u003c\/strong\u003e, rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, suitable for mains voltage lighting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis black light switch suits stairways, hallways or any room where a light needs switching from two separate locations. The 1-gang, 2-way configuration makes it a straightforward swap for an existing switch of the same type, and the screwed faceplate gives a fixed, flush finish.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eFits a standard 25mm back box. Wiring is via screw terminals, and fixing screws plus covers are included in the box.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096635142432,"sku":"102200","price":7.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102200-1.webp?v=1785763373"},{"product_id":"led-driver-1-10v-54w-dimmable","title":"LED 1-10V Dimmable Driver 54W 200-1050mA | Easeic LNA154AL","description":"\u003cp\u003eThe Easeic LNA154AL is a constant current LED driver built for commercial, architectural and OEM lighting projects. It supports 0\/1-10V dimming and delivers up to 54W of output power with an adjustable current range set by onboard DIP switches.\u003c\/p\u003e\u003ch2\u003e1-10V LED driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 54W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, adjustable 200mA to 1050mA via DIP switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC, maximum open circuit voltage under 77V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 0\/1-10V, PWM, resistance dimming and PUSH-Dim, with a 0 to 100% dimming range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 88%, power factor above 0.95, THD below 10%.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eControl and compatibility\u003c\/h2\u003e\u003cp\u003eThe 3-in-1 dimming interface covers 0\/1-10V, PWM and resistance dimming from a single unit, so it works with the majority of existing lighting control systems. PUSH-Dim lets an installer switch and dim from a standard push button without a separate control signal, useful where a dimming line has not been run.\u003c\/p\u003e\u003ch2\u003eBuild and protection\u003c\/h2\u003e\u003cp\u003eHoused in a slim linear case measuring 280 x 30 x 26mm, the driver is sized to fit inside LED panels, recessed luminaires, linear battens and other narrow fittings where a bulky driver will not sit. It carries UL protection class certification and includes protection against short circuit, over voltage and over current conditions. Operating temperature is rated from -20°C to +50°C.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to OEM luminaire manufacturers and installers working on offices, hospitality fit-outs, retail lighting and other professional installations where adjustable constant current output and multiple dimming protocols are needed from one driver.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096635240736,"sku":"632154","price":36.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-632154-1.webp?v=1785763379"},{"product_id":"led-dimmable-driver-700ma-25w","title":"Meanwell PCD-25-700B LED Dimmable Driver 25W 700mA","description":"\u003cp\u003eThe Meanwell PCD-25-700B is a mains dimmable LED driver rated at 25W, delivering a constant current of 700mA. It runs on an AC triac input of 220-240VAC and controls LED arrays between 24-36VDC without flickering, using trailing and leading edge dimmer switches wired directly to the mains.\u003c\/p\u003e\u003ch2\u003eKey features of this led dimmable driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower output\u003c\/strong\u003e, 25W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant current\u003c\/strong\u003e, 700mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 220-240VAC AC triac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage range\u003c\/strong\u003e, 24-36VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical efficiency\u003c\/strong\u003e, 81%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor correction\u003c\/strong\u003e, single-stage PFC topology, PF≧0.9, complies with EN61000-3-2 Class C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned to work with LED tubes (T8\/T5), PLG24 lamps, PLL2G11 fittings and any LED light that can run from a 700mA constant current driver.\u003c\/p\u003e\u003ch2\u003eManufacture and standards\u003c\/h2\u003e\u003cp\u003ePCD power supplies are made by Mean Well for the indoor lighting market. The 25W version, along with the 16W model, suits leading edge and trailing edge AC-TRIAC dimmers, and is built for two global utility inputs: 115VAC (90~135VAC) type A and 230VAC (180~295VAC) type B. The single-stage power factor correction topology keeps current harmonics within the limits set for LED lighting equipment.\u003c\/p\u003e","brand":"Meanwell","offers":[{"title":"Default Title","offer_id":52096635306272,"sku":"770037","price":25.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770037-1.webp?v=1785763414"},{"product_id":"gold-light-switch-16ax-2-way","title":"16AX 1-Gang 2-Way Light Switch Brushed Gold | Ledison","description":"\u003cp\u003eThis Ledison 16AX 1-Gang 2-Way Light Switch comes in a brushed gold finish with a slim raised profile. It brings a premium look to a standard switch position without changing how it wires in.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX, suitable for mains voltage lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e, 1-gang, 2-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody\u003c\/strong\u003e, high-quality metal construction with an insulated plastic rocker button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate\u003c\/strong\u003e, screwed fixing for straightforward installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals for secure connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a standard 25mm back box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential and commercial rooms where a gold light switch finish is wanted to match other brushed gold fittings. The 2-way function allows control of a light from two switch positions, such as either end of a hallway or staircase.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1-gang 2-way light switch\u003c\/li\u003e\n\u003cli\u003eMatching cover plate\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096637141280,"sku":"102237","price":7.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102237-1.webp?v=1785763500"},{"product_id":"silver-2-gang-2-way-light-switch","title":"16AX 2-Gang 2-Way Light Switch Silver | Ledison","description":"\u003cp\u003eA 16AX 2-gang 2-way light switch in silver, finished with a screwed faceplate and a raised slim profile. Fixing screws and covers are included, so it's ready to fit straight from the pack.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX, suitable for mains voltage lighting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e, 2-gang, 2-way switching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate\u003c\/strong\u003e, screwed, raised slim profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch type\u003c\/strong\u003e, rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires 25mm back box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis switch suits standard household lighting circuits where two switch positions control the same light, such as a hallway or landing setup. The slim profile and screwed faceplate give a neat finish against most wall surfaces.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFit onto a 25mm back box. Screw terminals make wiring straightforward for anyone used to standard UK switch plates.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16AX 2-gang 2-way light switch\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003cli\u003eCovers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096637174048,"sku":"102235","price":10.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102235-1.webp?v=1785763506"},{"product_id":"led-driver-7-2w-constant-current","title":"Lifuid 7.2W LED Driver 180mA Constant Current Power Supply","description":"\u003cp\u003eCompact 7.2W constant current LED driver from Lifuid, built as a replacement power supply for small LED fittings. It outputs 180mA at 25-40Vdc from a 220-240VAC mains input, and runs at a variable voltage within that range to match the connected load.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower output\u003c\/strong\u003e, 7.2watt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant current\u003c\/strong\u003e, 180mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 25-40Vdc variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 220-240VAC mains\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, non-dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, TUV, CB, CE, RCM, CCC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis constant current driver suits LED downlights, tubes and small flat panels that call for a 180mA supply. It is designed for indoor use only, and is not a dimmable unit, so it should be paired with fittings that do not need dimming control.\u003c\/p\u003e\u003ch3\u003eSuitable fittings\u003c\/h3\u003e\u003cp\u003eLifuid lists it as suitable for LED panels, downlights, spot lights and small LED tubes, making it a straightforward swap where an existing constant current driver has failed.\u003c\/p\u003e","brand":"Lifuid","offers":[{"title":"Default Title","offer_id":52096638157088,"sku":"LF-GIR015YM0180H","price":4.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-lf-gir015ym0180h-1.webp?v=1785763652"},{"product_id":"2-gang-switched-socket-13a-white","title":"13A 2 Gang Switched Socket White | Ledison","description":"\u003cp\u003eA white 13A 2 gang switched socket from Ledison, built for retrofit installations where a slim profile and simple wiring matter. It has angled, in-line terminals and captive screws that stay backed out during fitting, so both hands are free to position the socket rather than chase loose screws.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety shutter\u003c\/strong\u003e, operated by the earth pin of the plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching contact gap\u003c\/strong\u003e, minimum 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised slim profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 40mm back box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, angled in-line terminals with captive screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing\u003c\/strong\u003e, twin earth fitted as standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRockers\u003c\/strong\u003e, outboard rockers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to retrofit work where an existing back box is already in place, and to general socket and switch upgrades around the home or office. The raised slim profile and outboard rockers make it a straightforward swap for older fittings without altering the wall opening.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eThe captive screws are backed out from the factory, and the angled in-line terminals are designed to make cable connection easier inside a standard 40mm back box.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096638419232,"sku":"102214","price":10.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102214-1.webp?v=1785763664"},{"product_id":"single-socket-usb-charging-ports","title":"13A 1-Gang Switched Socket with USB A \u0026 C Ports | Ledison","description":"\u003cp\u003eA black 1-gang switched socket fitted with two USB charging ports, one Type A and one Type C, for keeping phones, tablets and cameras topped up without a separate charger plugged into the wall.\u003c\/p\u003e\u003ch2\u003eKey features of this single socket with USB ports\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB outputs\u003c\/strong\u003e, 1 x Type A and 1 x Type C port for charging a wide range of devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety protection\u003c\/strong\u003e, each USB port has an internal safety feature against overload or short circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShutter mechanism\u003c\/strong\u003e, safety shutter operated by the earth pin of the plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB compatibility\u003c\/strong\u003e, works with USB 2.0 and USB 3.0 devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching contact gap\u003c\/strong\u003e, minimum 3mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e, angled in-line terminals and backed-out captive screws for easier fitting, requires a 40mm back box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to living rooms, bedrooms, home offices and anywhere a socket is used for both mains power and device charging. Handy beside a bed for charging a phone overnight, or at a desk for a tablet and mains lead together.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x 13A 1-gang switched socket with USB Type A and Type C ports\u003c\/li\u003e\n\u003cli\u003eBacked-out captive screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096638517536,"sku":"102203","price":9.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102203-1.webp?v=1785763714"},{"product_id":"1-gang-switched-socket-13a","title":"13A 1-Gang Switched Socket | Ledison Square Profile","description":"\u003cp\u003eA 13A 1-gang switched socket with a raised square profile and screwed faceplate, built for straightforward wiring and a neat finish on the wall.\u003c\/p\u003e\u003ch2\u003eLight switches and sockets: key features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, angled, in-line screw terminals for easier cable routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e, backed-out captive screws included, so nothing gets lost during fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised square profile with a screwed faceplate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 30mm back box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixings\u003c\/strong\u003e, supplied with fixing screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to standard domestic and light commercial wiring where a single switched 13A outlet is needed. The square-edged design pairs with other fittings in the same range for a consistent look across a room.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eThe angled terminals make it easier to dress cables neatly inside the back box, and the captive screws stay in place until you are ready to tighten them.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096638681376,"sku":"102204","price":7.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102204-1.webp?v=1785763760"},{"product_id":"switched-socket-usb-a-c-ports","title":"13A 1-Gang Switched Socket with USB A \u0026 C Ports | Ledison Brushed Steel","description":"\u003cp\u003eThis 1-gang switched socket combines a standard 13A outlet with two USB charging ports, one Type A and one Type C, finished in brushed stainless steel. It suits bedrooms, living rooms and offices where you want to charge a phone or tablet without an adaptor plugged into the socket.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB ports\u003c\/strong\u003e, 1x Type A and 1x Type C, compatible with USB 2.0 and USB 3.0 devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging compatibility\u003c\/strong\u003e, designed to charge iPads, iPhones, tablets, mobiles, cameras and similar devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverload protection\u003c\/strong\u003e, each USB port has an internal safety feature against overload or short circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety shutter\u003c\/strong\u003e, operated by the earth pin of the plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching contact gap\u003c\/strong\u003e, minimum 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e, angled in-line terminals and backed-out captive screws for easier fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eThe socket requires a 40mm back box. The captive screws and angled terminals are meant to make wiring more straightforward for an installer working behind a single back box.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eA single socket with USB charging ports like this one is useful anywhere you need to plug in an appliance and charge a device from the same point, such as a bedside table, hallway console or kitchen worktop area.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096638976288,"sku":"102225","price":9.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102225-1.webp?v=1785763785"},{"product_id":"3-gang-2-way-switch-black","title":"16AX 3-Gang 2-Way Light Switch Black | Ledison","description":"\u003cp\u003eA 16AX 3-gang 2-way light switch in black, built for standard mains voltage lighting circuits. It comes with fixing screws and covers included, ready to fit.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch type\u003c\/strong\u003e, rocker switch, 3-gang 2-way configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate\u003c\/strong\u003e, screwed faceplate with a raised slim profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals for a secure wired connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires a 25mm back box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX, suitable for mains voltage lighting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis black light switch suits any room where you want switches and sockets to match a darker decor scheme. The 3-gang layout controls three separate lighting circuits from one plate, useful in hallways, kitchens or living rooms with multiple light fittings.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eFixing screws and covers are supplied, so it installs onto a standard 25mm back box using the screw terminals provided. No additional fittings are needed beyond the back box itself.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096639041824,"sku":"102202","price":12.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102202-1.webp?v=1785763805"},{"product_id":"dali-dimmable-led-driver-36w","title":"LED DALI Dimmable Driver 36W 200-1050mA | Easeic LND136","description":"\u003cp\u003eThe Easeic LND136 is a constant current DALI dimmable driver built for LED arrays, panels and architectural luminaires that need flexible output current and smooth dimming control. Output power reaches up to 36W, with output current adjustable from 200mA to 1050mA via built-in DIP switches, so installers can match the driver to the LED load on site.\u003c\/p\u003e\u003ch2\u003eKey features of this dali dimmable led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, adjustable 200mA to 1050mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming protocols\u003c\/strong\u003e, DALI 2 with DALI feedback, 1-10V, PWM and PUSH-Dim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 0% to 100%, with LED start possible from 0.1% brightness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100V to 277V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, compact low-profile design, 167 x 39 x 30mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimming performance\u003c\/h2\u003e\u003cp\u003eThe LND136 uses analogue flicker-free dimming for smooth adjustment across its full range. Because it supports DALI 2 with feedback alongside 1-10V, PWM and PUSH-Dim, it fits into professional smart lighting control systems as well as simpler analogue setups. This makes it suited to offices, hospitality, retail and architectural lighting where visual comfort matters.\u003c\/p\u003e\u003ch2\u003eEfficiency and protection\u003c\/h2\u003e\u003cp\u003eEfficiency runs up to 88%, with a power factor greater than 0.95 and THD below 10%. The driver includes protection against short circuit, over current, over voltage and open circuit conditions for safe long-term operation.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eA terminal cover and cable retainer are included for installation safety. The compact housing allows fitting inside slim luminaires and confined fixtures, suiting both new builds and retrofit LED lighting projects.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096640778528,"sku":"613136","price":28.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-613136-1.webp?v=1785763823"},{"product_id":"dali-dimmable-led-driver-converter","title":"DALI Dimmable LED Driver Converter DA02 | Glacial","description":"\u003cp\u003eThe Glacial DA02 is a DALI dimmable LED driver that converts a DALI signal into a 1-10V output, suitable for constant current LED drivers. It also supports PWM and 0-10V DC outputs, making it compatible with 3-in-1 (DC\/PWM\/Resistor) LED drivers widely used in panels, downlighters and T8\/T5 LED tubes.\u003c\/p\u003e\u003cp\u003eBuilt to the IEC62386 (Part 102 and 206) DALI standard, the DA02 takes a digital DALI signal and outputs an analogue signal that most constant current and constant voltage drivers can read. It works as a compact DALI bus power supply link between a lighting control system and standard dimmable drivers.\u003c\/p\u003e\u003ch2\u003eKey features of this dali dimmable led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e, compliant with DALI IEC62386 Part 102 and Part 206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDALI input\u003c\/strong\u003e, polarity insensitive, so wiring orientation does not matter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector\u003c\/strong\u003e, screw-less terminals for quick installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput options\u003c\/strong\u003e, selectable PWM-10V, DC 0-10V or DC 1-10V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming curve\u003c\/strong\u003e, selectable logarithmic or linear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay\u003c\/strong\u003e, built-in relay to switch connected drivers off completely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eAs an indoor digital lighting control device, the DA02 (also referred to as LDN-DA02) suits office buildings, conference rooms, factories and intelligent home lighting. It sits between a DALI control system and downstream drivers, giving full on\/off control as well as dimming, which also helps cut wasted energy when devices are switched off completely rather than left on standby.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eThe DA02 converter carries a 5 year warranty.\u003c\/p\u003e","brand":"Glacial","offers":[{"title":"Default Title","offer_id":52096640942368,"sku":"770060","price":40.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-770060-1.webp?v=1785763830"},{"product_id":"1-gang-2-way-light-switch-white","title":"16AX 1-Gang 2-Way Light Switch White | Ledison","description":"\u003cp\u003eA 16AX 1-gang 2-way light switch in white, built with a raised slim profile and a screwed faceplate. Suitable for mains voltage lighting, it comes supplied with fixing screws and covers ready to fit.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, 16AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching\u003c\/strong\u003e, 1-gang 2-way rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile\u003c\/strong\u003e, raised slim profile with screwed faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\u003c\/strong\u003e, screw terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack box\u003c\/strong\u003e, requires 25mm back box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e, suitable for mains voltage lighting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis white light switch suits standard domestic and light commercial wiring where a 2-way switching arrangement is needed, such as controlling one light from two positions. The screwed faceplate and slim profile give a neat finish against most wall surfaces.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1-gang 2-way light switch\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003cli\u003eCover\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096641532192,"sku":"102208","price":9.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-102208-1.webp?v=1785763898"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/led-lighting-accessories.oembed?page=4","provider":"LED \u0026 Solar","version":"1.0","type":"link"}