{"title":"LED Emergency Lighting","description":"\u003cp\u003eEmergency LED lighting covers bulkheads, conversion packs and emergency drivers that keep an installation legal when mains power fails. This range includes maintained self-test bulkheads with IP65 ratings for indoor or outdoor use, and emergency kits designed to fit into existing LED tube and PL fittings.\u003c\/p\u003e\u003cp\u003eConversion packs use lithium or Ni-MH battery options to add emergency autonomy to standard LED luminaires and arrays, typically running at reduced power for a set period to meet BS5266 requirements. Drivers and packs are available for different LED array voltages and configurations, from small DALI addressable units to higher output emergency packs.\u003c\/p\u003e\u003cp\u003eThese products suit installers working on residential blocks, student accommodation, hospitals and public buildings where emergency lighting compliance is required. Options range from complete bulkhead fittings to standalone conversion kits for retrofitting existing luminaires.\u003c\/p\u003e","products":[{"product_id":"led-emergency-conversion-kit-lifepo4","title":"Liteplan NLP\/1S\/80-K LED Emergency Conversion Pack LiFePO4","description":"\u003cp\u003eThe Liteplan NLP\/1S\/80-K is an LED emergency conversion pack for integral use inside LED luminaires, giving compatible fittings a 3-hour switchable emergency lighting function alongside normal operation. It suits LED loads from 6V to 55V and is built around long life LiFePO4 battery technology.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency duration\u003c\/strong\u003e, 3-hour switchable emergency lighting module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded parts\u003c\/strong\u003e, module, single cell battery and charge LED indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED load range\u003c\/strong\u003e, suitable for 6V to 55V LED loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery type\u003c\/strong\u003e, long life LiFePO4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e, slim module for mounting inside the luminaire, suited to linear applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, fitted cables with a strain relief module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eOnce installed, the fitting operates as normal from its standard switch. When an unswitched power supply is connected, the pack takes over and provides emergency operation during a mains failure. This gives one system dual functionality: everyday lighting and maintained emergency backup in a single conversion.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eLiteplan has tested and verified this conversion pack for use with Ledison T8 tube lights, T5 tube lights, GU10 spots and GLS LED bulbs, provided the correct installation method is followed. Its slim profile makes it a practical fit for linear tube applications where space inside the fitting is limited.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis conversion pack is intended for compatible LED luminaires, particularly linear fittings, in offices, corridors, commercial buildings and educational spaces where emergency lighting is needed. It is aimed at installers, maintenance teams and lighting manufacturers looking to add emergency backup to approved LED products.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNLP\/1S\/80-K emergency module\u003c\/li\u003e\n\u003cli\u003eSingle cell LiFePO4 battery\u003c\/li\u003e\n\u003cli\u003eCharge LED indicator\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Liteplan","offers":[{"title":"Default Title","offer_id":52096611156256,"sku":"NLP\/1S\/80-K","price":41.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-nlp-1s-80-k-1.webp?v=1785761858"},{"product_id":"emergency-led-spotlight-twin-ip65","title":"LED Twin Emergency Spotlight IP65 2x3W Self Test | Knightsbridge EMTWINST","description":"\u003cp\u003eThe EMTWINST from Knightsbridge is a 230V twin-head LED emergency spotlight rated IP65. It pairs two 3W LED heads with a 3 hour non-maintained operation, giving commercial buildings the emergency led lighting needed to guide occupants to safety during a power cut.\u003c\/p\u003e\u003ch2\u003eKey features of this led emergency lighting fitting\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation\u003c\/strong\u003e, 3 hour non-maintained emergency operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, polycarbonate construction with a white finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight output\u003c\/strong\u003e, 490lm in emergency mode at 6000K daylight colour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption\u003c\/strong\u003e, 6 watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEDs\u003c\/strong\u003e, 12 LEDs, non-dimmable, 80 degree beam angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime\u003c\/strong\u003e, 50,000 hours rated lamp life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFitted in commercial and public buildings where emergency lighting is a legal requirement. The twin spotlight heads direct people toward exits when mains power fails, and the self test function checks the unit is working without manual testing.\u003c\/p\u003e\u003ch3\u003eDimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight: 301mm\u003c\/li\u003e\n\u003cli\u003eWidth: 280mm\u003c\/li\u003e\n\u003cli\u003eProjection: 90mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild and safety\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSafety Class II\u003c\/li\u003e\n\u003cli\u003eIP65 weatherproof rating, suitable where moisture is present\u003c\/li\u003e\n\u003cli\u003ePrismatic diffuser\u003c\/li\u003e\n\u003cli\u003ePrimary voltage 230V 50Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003e3 years, excluding the battery.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":52096611385632,"sku":"110855","price":51.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-110855-1.webp?v=1785761973"},{"product_id":"dali-led-emergency-driver-lithium","title":"DALI LED Emergency Driver 3 Hour Lithium | Liteplan DNA\/1","description":"\u003cp\u003eThe Liteplan DNA\/1 is a DALI addressable emergency lighting conversion driver fitted with a lithium ion battery, an LED status indicator and full wiring instructions. It is compatible with DALI dimming systems and works with LED tubes, downlights, bulbs and panels.\u003c\/p\u003e\u003ch2\u003eDali led driver for emergency conversion\u003c\/h2\u003e\u003cp\u003eThis is a 3 hour DALI self-test emergency lighting conversion kit built to suit a wide range of LED types and circuits. It automatically adjusts the output LED current to match the battery and the load, so illumination and battery duration are balanced without manual setup. The DNA\/1 operates LED loads between 6-55V forward.\u003c\/p\u003e\u003cp\u003eIf the module is commissioned without a DALI control system present, it reverts to a standalone self-test and shows any fault through the charge LED, in keeping with the DALI Standard.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDALI device\u003c\/strong\u003e, DiiA Registered DALI 1 Device\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay protection\u003c\/strong\u003e, 2-pole changeover relay with an additional 3rd pole relay for driver protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, LiFePO4 cells with deep discharge protection and automatic recovery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging\u003c\/strong\u003e, intelligent, low energy charging circuit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, average emergency output of 2.1W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor\u003c\/strong\u003e, slim module for integral mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and certification\u003c\/h2\u003e\u003cp\u003eThe DNA\/1 can operate with the LiteMesh wireless system and has been independently tested and certified by TÜV against national and international safety regulations.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Default Title","offer_id":52096611713312,"sku":"DNA\/1-K-DALI","price":60.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-dna-1-k-dali-1.webp?v=1785762005"},{"product_id":"led-emergency-spot-light-module","title":"Halo LED Emergency Spot Light 6W\/3W IP20 | Ledison","description":"\u003cp\u003eThe Halo is a non-maintained emergency spotlight module built around a lithium-ion battery pack, offering 6Watt\/3Watt operation with a single LED spotlight. Its slim circular design suits surface or recessed mounting on plasterboard ceilings, walls, cable trays and baskets, making it a practical choice for emergency lighting where a discreet fitting is needed.\u003c\/p\u003e\u003ch2\u003eKey features for emergency lighting\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 6Watt\/3Watt emergency operation, 300 lumen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup duration\u003c\/strong\u003e, 3 hours of non-maintained operation after mains failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, IP20, for indoor use only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, overcurrent and voltage protection, battery failure warning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting\u003c\/strong\u003e, auto self-test with a fitted manual test button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, 3 cell lithium 3.7V\/2200mAh pack, 24 hour recharge time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to corridors and escape routes where a compact emergency spot light is required, whether as a standalone unit or as part of a wider emergency lighting scheme.\u003c\/p\u003e\u003ch3\u003eConstruction and mounting\u003c\/h3\u003e\u003cp\u003eThe body is moulded polycarbonate with an acrylic lens. The recessed version is supplied with a 140mm mounting disc. Circular or oval light distribution is available; specify the \/OVAL suffix for oval distribution.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHalo LED emergency spot light module\u003c\/li\u003e\n\u003cli\u003e140mm mounting disc (recessed fitting)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ledison","offers":[{"title":"Surface Mounted","offer_id":52096636944672,"sku":"CRW\/1\/NM\/OA","price":24.26,"currency_code":"GBP","in_stock":true},{"title":"Recessed","offer_id":52096636977440,"sku":"CRW\/1\/NM\/OA-2","price":24.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-crw-1-nm-oa-1.webp?v=1785763474"},{"product_id":"led-t8-tube-120cm-emergency-conversion","title":"T8 LED Tube 120cm 20W with NLP\/1S\/80-K Emergency Pack | Liteplan","description":"\u003cp\u003eThis kit pairs a 120cm LED T8 tube with the Liteplan NLP\/1S\/80-K emergency conversion pack, giving a linear LED fitting the ability to switch to emergency mode during a mains power failure. The tube runs at 20W with a normal light output of 2000 lumens, while the conversion pack keeps the fitting lit for 3 hours once mains power is lost.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined kit\u003c\/strong\u003e: 120cm LED T8 tube and Liteplan NLP\/1S\/80-K emergency conversion pack supplied together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency duration\u003c\/strong\u003e: 3 hours from the LiFePO4 lithium iron phosphate battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED load range\u003c\/strong\u003e: suitable for LED loads from 6V to 80V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic current adjustment\u003c\/strong\u003e: matches output current to the connected battery and LED load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage emergency power\u003c\/strong\u003e: 2.6W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e: third party tested and certified by TÜV.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe kit suits corridors, utility areas, commercial spaces, offices and workshops, and any indoor location where a linear LED fitting needs emergency lighting backup. The NLP\/1S\/80-K is designed for integral use inside the luminaire itself, so it sits within the fitting rather than as a separate accessory.\u003c\/p\u003e\u003ch2\u003eTube and emergency pack details\u003c\/h2\u003e\u003ch3\u003e120cm LED T8 tube\u003c\/h3\u003e\u003cp\u003eThe tube is a 120cm LED T8 unit rated at 20W with a normal light output of 2000 lumens, intended for use in compatible T8 fittings.\u003c\/p\u003e\u003ch3\u003eLiteplan NLP\/1S\/80-K emergency pack\u003c\/h3\u003e\u003cp\u003eThe conversion pack includes deep discharge protection and battery temperature protection, and draws low power during charging. It runs from long life LiFePO4 batteries and is built as a slim module suited to linear lighting fittings.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e120cm LED T8 tube, 20W\u003c\/li\u003e\n\u003cli\u003eLiteplan NLP\/1S\/80-K emergency conversion pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Liteplan","offers":[{"title":"Warm White","offer_id":52096637042976,"sku":"EM+110813","price":57.33,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52096637075744,"sku":"EM+110814","price":57.33,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52096637108512,"sku":"EM+110815","price":57.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-em-110813-1.webp?v=1785763491"},{"product_id":"twin-spot-3hr-emergency-led-light","title":"Twin Spot 3hr Emergency LED Light IP65 IK10 | Olympia Power Lights","description":"\u003cp\u003eThe Olympia Power Lights Twin Spot is a 12.6W LED emergency luminaire built for large industrial spaces. It runs for 3 hours in non-maintained mode after a mains failure, with self-testing to BS5266 as standard. The IK10 impact rating and IP65 waterproof polycarbonate body suit demanding and exposed installations.\u003c\/p\u003e\u003ch2\u003eKey features of this led emergency lighting fitting\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption\u003c\/strong\u003e, 12.6W maximum LED draw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation\u003c\/strong\u003e, 3 hours non-maintained on battery after mains failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight output\u003c\/strong\u003e, 1760lm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test\u003c\/strong\u003e, built-in self-testing to BS5266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact rating\u003c\/strong\u003e, IK10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP65 polycarbonate body\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign\u003c\/h2\u003e\u003cp\u003eTwo independently adjustable lenses let installers direct light exactly where it is needed across each space. The high-power LED sources are matched to the twin-lens layout to cover wide areas from a single fitting, and the whole unit weighs only 3kg despite its IK10-rated construction.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe Power Light series is intended for large open areas with high ceilings: warehouses, logistics centres, car parks and industrial installations where a single fitting needs to cover a wide floor area reliably during a power outage.\u003c\/p\u003e\u003ch3\u003eBattery and operation\u003c\/h3\u003e\u003cp\u003eThis is a non-maintained LED fitting, meaning the LEDs only operate during a mains failure or a self-test cycle. It is supplied with NiCd batteries.\u003c\/p\u003e","brand":"Olympia","offers":[{"title":"Basic","offer_id":52096638550304,"sku":"923009007","price":162.62,"currency_code":"GBP","in_stock":true},{"title":"Waterproof IP65","offer_id":52096638583072,"sku":"923009007-2","price":179.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-923009007-1.webp?v=1785763732"},{"product_id":"emergency-recessed-spot-light","title":"Emergency Recessed Spot Light 186lm 6500K | Liteplan S-HLP\/1\/43\/FL","description":"\u003cp\u003eThe S-HLP\/1\/43\/FL is a non-maintained emergency recessed spot light with an illuminated dual-colour halo effect, built for ceiling recess installations through a 43mm aperture. It delivers 186 lumens at its 550mA output and runs for 3 hours on emergency power once mains supply fails.\u003c\/p\u003e\u003ch2\u003eKey features of this emergency spot light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated power\u003c\/strong\u003e, 3 Watt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, 3.2V 3.6Ah LiFePO4 pack in a moulded housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED emitter\u003c\/strong\u003e, Samsung LH315B with flood lens to illuminate points of emphasis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour temperature\u003c\/strong\u003e, 6500K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam angle\u003c\/strong\u003e, 110°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel finish\u003c\/strong\u003e, white to RAL9016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eDesigned for ceiling recess applications where a discreet emergency fitting is needed alongside a visible point-of-emphasis indicator. The circular halo signals fitting status, useful in corridors, stairwells and escape routes where staff or occupants need a quick visual check.\u003c\/p\u003e\u003ch3\u003eWiring and connection\u003c\/h3\u003e\u003cp\u003eThe non-maintained emergency driver is supplied with strain relief cables and interconnecting leads, wired in series connection via the C4201 plug, simplifying installation across multiple fittings on the same circuit.\u003c\/p\u003e\u003ch2\u003eOutput at different currents\u003c\/h2\u003e\u003cp\u003eLumen output scales with drive current: 118 delivered lumens at 350mA, 186 delivered lumens at 550mA, and 237 delivered lumens at 700mA, giving installers flexibility depending on driver configuration.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Non Maintained 186 Lumen","offer_id":52204461293856,"sku":"S-HLP\/1\/LED\/43\/FL\/W","price":43.0,"currency_code":"GBP","in_stock":true},{"title":"Maintained 237 Lumen","offer_id":52204461326624,"sku":"S-HLP\/1\/LED\/43\/FL\/W-2","price":43.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s-hlp-1-led-43-fl-w-1.webp?v=1785764396"},{"product_id":"led-t8-tube-emergency-pack","title":"T8 LED Tube 60cm 10W Emergency Conversion Pack | Liteplan NLP\/1S\/80-K","description":"\u003cp\u003eThis kit pairs a 60cm T8 LED tube with the Liteplan NLP\/1S\/80-K emergency conversion pack, giving a linear LED fitting the ability to keep running through a mains power cut. The tube handles day to day lighting; the conversion pack takes over automatically if the mains supply fails.\u003c\/p\u003e\u003ch2\u003eT8 LED tube with emergency conversion pack\u003c\/h2\u003e\u003cp\u003eThe 60cm T8 LED tube is rated at 10W with a normal light output of 1000 lumens, suitable for compatible T8 fittings in offices, workshops and other indoor spaces. The Liteplan NLP\/1S\/80-K module fits inside the luminaire and switches the tube to emergency mode when mains power is lost.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined kit\u003c\/strong\u003e: 60cm T8 LED tube and Liteplan NLP\/1S\/80-K emergency conversion pack in one order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 hour emergency duration\u003c\/strong\u003e during a mains power failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiFePO4 lithium iron phosphate battery\u003c\/strong\u003e for long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED load voltage range of 6V to 80V\u003c\/strong\u003e for use with a range of LED circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic output current adjustment\u003c\/strong\u003e to match the battery and the connected LED load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTÜV third-party tested and certified\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe combination suits corridors, utility areas, commercial spaces, offices and workshops, anywhere a linear LED fitting needs a backup light source during a power failure. The NLP\/1S\/80-K is designed for integral fitting inside the luminaire rather than as a separate enclosure.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Warm White","offer_id":52096648577312,"sku":"EM+110803","price":54.02,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52096648610080,"sku":"EM+110804","price":54.02,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52096648642848,"sku":"EM+110805","price":54.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-em-110803-1.webp?v=1785764778"},{"product_id":"emergency-exit-sign-6w-arrow-down","title":"LED Emergency Exit Sign 6W Arrow Down IP20 | Ledison","description":"\u003cp\u003eThis LED emergency exit sign gives clear directional guidance during a power failure, with a white trim and a polycarbonate arrow down legend. It runs at 6W and is built for roof mounting in indoor spaces where a reliable illuminated fire exit sign is needed.\u003c\/p\u003e\u003ch2\u003eKey features of this emergency exit sign\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED power\u003c\/strong\u003e, 5.5W LED for maintained mode operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup\u003c\/strong\u003e, 3.6V 1.5Ah Ni-CD battery gives up to 3 hours of illumination during a power cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest button\u003c\/strong\u003e, a test button at the bottom allows quick, easy checks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArrow legend\u003c\/strong\u003e, supplied with an arrow down direction; up, left and right legends are also available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating\u003c\/strong\u003e, IP20, suited to indoor use only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViewing distance\u003c\/strong\u003e, readable up to 30m away.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and fitting\u003c\/h2\u003e\u003cp\u003eThe housing is powder-coated white mild steel, fitted with 20mm cable entries and a BESA box fixing for a secure roof-mounted installation. The legend panel is polycarbonate for durability against knocks.\u003c\/p\u003e\u003ch3\u003eOptional legends\u003c\/h3\u003e\u003cp\u003eAdditional arrow directions are available if you need a different orientation for your layout. A running man through door design is also offered, ordered with the \/v2 suffix.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to offices, retail units and industrial buildings where an emergency exit led light is required to mark escape routes clearly when the mains supply fails.\u003c\/p\u003e","brand":"Ledison","offers":[{"title":"Default Title","offer_id":52096648741152,"sku":"0022523","price":16.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-0022523-1.webp?v=1785764830"},{"product_id":"led-emergency-spot-light-3w","title":"3W LED Emergency Spot Light Non-Maintained LiFePO4 | Liteplan","description":"\u003cp\u003eThe Liteplan S\/BNM\/1 is a compact recessed emergency spot light built for ceiling installation in commercial, residential and public buildings. It runs emergency only, non-maintained operation, staying off during normal mains supply and switching on automatically if the mains fails.\u003c\/p\u003e\u003ch2\u003eKey features of this emergency spot light\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-maintained operation\u003c\/strong\u003e for emergency only lighting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3 hour emergency duration\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700mA emergency driver\u003c\/strong\u003e for constant current LED devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiFePO4 lithium iron phosphate battery\u003c\/strong\u003e for long life performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40mm to 43mm ceiling aperture\u003c\/strong\u003e with a minimum void depth of 90mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugs, leads and strain relief module\u003c\/strong\u003e included for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to corridors, stairwells, offices, shops, hotels and communal areas where discreet emergency lighting is needed. The recessed housing keeps the driver and battery pack hidden within the ceiling void, so only a small bezel is visible from below.\u003c\/p\u003e\u003ch3\u003eNon-maintained emergency operation\u003c\/h3\u003e\u003cp\u003eThe LED stays off during normal mains operation and only activates during a power failure. Once triggered, it can provide up to 3 hours of emergency lighting to help occupants find escape routes and circulation areas.\u003c\/p\u003e\u003ch3\u003eLED optic options\u003c\/h3\u003e\u003cp\u003eThe S\/BNM\/1 range can be supplied with different LED and optic combinations: an open area lens giving 266 lumens, a corridor lens giving 268 lumens, a flood option with no lens giving 237 lumens, or a dimming charge LED option giving 266 lumens. White is the standard bezel colour, with black available if specified.\u003c\/p\u003e\u003ch3\u003eProtection features\u003c\/h3\u003e\u003cp\u003eThe unit includes deep discharge protection and battery temperature protection, and is made in the UK by Liteplan.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Default Title","offer_id":52096655524128,"sku":"S\/BNM\/1\/43\/OA","price":47.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s-bnm-1-43-oa-1.webp?v=1785765249"},{"product_id":"emergency-exit-sign-arrow-down","title":"Aries LED Emergency Exit Sign 5.5W IP20 Arrow Down | Olympia","description":"\u003cp\u003eThe Aries LED Emergency Exit Sign is an indoor emergency fitting with a 5.5W LED and 6W power consumption in maintained mode. A NiCd battery keeps the LED board running for 3 hours if mains power fails, and a test button on the fitting lets you check operation without extra tools.\u003c\/p\u003e\u003ch2\u003eKey features of this emergency exit sign\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED rating\u003c\/strong\u003e, 5.5W LED, 6W power consumption in maintained mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup\u003c\/strong\u003e, 3.6V 1.5Ah NiCd batteries, giving 3 hours of maintained operation after a mains failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViewing distance\u003c\/strong\u003e, maximum viewing distance of 30m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating\u003c\/strong\u003e, IP20, suitable for indoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting\u003c\/strong\u003e, built-in test button for quick checks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegend included\u003c\/strong\u003e, supplied with an arrow-down polycarbonate legend\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction\u003c\/h2\u003e\u003cp\u003eThe body is powder-coated white mild steel with 20mm cable entries and BESA box fixing, giving a straightforward install onto a standard ceiling box.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to offices, retail units and industrial buildings where a clear, illuminated exit route needs to be marked.\u003c\/p\u003e\u003ch3\u003eOptional legends\u003c\/h3\u003e\u003cp\u003eGreen Man Legends are available with arrows pointing up, down, left or right. For a running man legend through the door, add the suffix \/v2 when ordering.\u003c\/p\u003e","brand":"Olympia","offers":[{"title":"Default Title","offer_id":52096657654048,"sku":"002252","price":21.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002252-1.webp?v=1785765528"},{"product_id":"emergency-led-spotlight-corridor-optic","title":"LED Emergency Spotlight Corridor Optic 3W IP54 | Liteplan S-HLP\/1\/LED\/43\/CO\/W","description":"\u003cp\u003eThe Liteplan S-HLP\/1\/LED\/43\/CO\/W is a non-maintained emergency spotlight fitted with an elliptical corridor lens, built for spacing along corridors where a wide, even throw of light is needed. It delivers 232 delivered lumens from a 550mA output, backed by a 3.2V 3.6Ah LiFePO4 battery pack housed in a moulded casing for 3 hours of emergency operation.\u003c\/p\u003e\u003ch2\u003eEmergency lighting led with corridor optics\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, 3.2V 3.6Ah LiFePO4 pack in a moulded housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency duration\u003c\/strong\u003e, 3 hour non-maintained operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 550mA drive current, 232 delivered lumens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptic\u003c\/strong\u003e, LED\/43 emitter with elliptical corridor lens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicator\u003c\/strong\u003e, circular halo indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBezel\u003c\/strong\u003e, white, finished to RAL9016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInterconnecting cables and strain relief are supplied, so the module wires directly into a corridor circuit without extra terminal work. The elliptical corridor lens spreads light along the run of a corridor rather than in a tight circle, which helps with fitting spacing along the ceiling line.\u003c\/p\u003e\u003ch3\u003eProduct code\u003c\/h3\u003e\u003cp\u003eOrdered as S-HLP\/1\/LED\/43\/CO\/W, SKU LED\/43\/CO.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Non-Maintained","offer_id":52204461785376,"sku":"LED\/43\/CO","price":43.0,"currency_code":"GBP","in_stock":true},{"title":"Maintained","offer_id":52204461818144,"sku":"LED\/43\/CO-2","price":53.92,"currency_code":"GBP","in_stock":true},{"title":"Self-Test Non-Maintained","offer_id":52204461850912,"sku":"LED\/43\/CO-3","price":53.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-led-43-co-1.webp?v=1785765924"},{"product_id":"dali-addressable-emergency-pack-dna2","title":"DALI Addressable Emergency Pack 4.7W LiFePO4 | Liteplan DNA\/2","description":"\u003cp\u003eThe Liteplan DNA\/2 is a high voltage DALI emergency pack with a lithium-ion battery, built to work with a wide range of LED lights and circuits. It forms part of a 3 hour High Output DALI self-test emergency lighting conversion kit.\u003c\/p\u003e\u003ch2\u003eDALI emergency lighting with automatic load matching\u003c\/h2\u003e\u003cp\u003eThe DNA\/2 adjusts its output LED current automatically to match the battery to the load, giving the best illumination while keeping full battery duration. It operates LED loads between 10 and 55V forward. A related variant, the DNA\/2S\/80, covers LED loads between 10 and 80V forward.\u003c\/p\u003e\u003cp\u003eThe unit is fully DALI compliant. If commissioned without a DALI control system present, it reverts to standalone self-test mode and shows any faults through its charge LED. The DNA range has been independently certified by TÜV for safety and for compliance with national and international regulations. It is also suitable for use with the LiteMesh wireless monitoring system.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDALI registration\u003c\/strong\u003e, DiiA Registered DALI 1 Device\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, high output for more powerful luminaires, with an average emergency output of 4.7W (the DNA\/2S version outputs 5.1W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay configuration\u003c\/strong\u003e, 2-pole changeover relay plus an additional 3rd pole relay for driver protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery protection\u003c\/strong\u003e, deep discharge protection with automatic LiFePO4 battery protection and recovery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging\u003c\/strong\u003e, intelligent, low energy charging circuit paired with extra long life LiFePO4 cells\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, slim module for integral mounting, with a strain relief module available for remote mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED luminaires needing DALI addressable emergency conversion, where installers need a self-test module that also works as a standalone fallback if no DALI controller is fitted. TÜV testing supports use where compliance with recognised safety standards is required.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Default Title","offer_id":52096667091232,"sku":"DNA\/2","price":60.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-dna-2-1.webp?v=1785766302"},{"product_id":"led-emergency-driver-battery-pack","title":"Hytronik HEM-02 Universal Emergency LED Driver \u0026 Battery Pack","description":"\u003cp\u003eThe Hytronik HEM-02 is an emergency LED driver and battery module that converts a wide range of LED luminaires and arrays for emergency operation. It fits into the low voltage connection between the mains LED driver and the LEDs, letting the fitting run as normal under mains healthy conditions and drop to reduced output if the mains supply fails.\u003c\/p\u003e\u003ch2\u003eLED emergency lighting conversion\u003c\/h2\u003e\u003cp\u003eThe driver automatically adjusts its output current to match the battery to the connected load, balancing illumination against battery duration. It works with a wide range of LED types, including Philips Fortimo DLM, SLM and LLM ranges, Bridgelux LS\/ES\/RS ranges, Citizen 4-41W ranges, GE Infusion and Xicato, alongside many other common LED arrays.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic adjustment\u003c\/strong\u003e, matches battery output to the connected LED load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay configuration\u003c\/strong\u003e, 2-pole changeover relay with an additional 3rd pole relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery protection\u003c\/strong\u003e, deep discharge protection paired with a constant current charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery type\u003c\/strong\u003e, high-temperature NiCd cells (Yuasa)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Ledison LED Tubes and 2D Lamps in 12W, 16W and 9W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis module suits installers converting standard mains LED fittings, such as tubes, 2D lamps and LED arrays, into maintained emergency luminaires without replacing the existing driver setup. It is fitted inline between the mains driver and the LED load, and switches over automatically on mains failure.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBattery NiCd\u003c\/li\u003e\n\u003cli\u003eCable with green LED indicator, 25cm lead length\u003c\/li\u003e\n\u003cli\u003eTest button\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096686031136,"sku":"101015-2","price":46.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-101015-1_77ba5cf1-382b-4d8a-bbd5-df965d87662c.webp?v=1785767236"},{"product_id":"emergency-led-tube-180cm-32w","title":"Emergency LED T8 Tube 180cm 32W Conversion Pack | Liteplan NLP\/1S\/80-K","description":"\u003cp\u003eThis kit pairs a 180cm LED T8 tube with the Liteplan NLP\/1S\/80-K emergency conversion pack, giving a single order for everyday and emergency lighting in one linear fitting. The tube runs at 32W and produces 3200 lumens for normal use, while the conversion pack takes over automatically for 3 hours if the mains supply fails.\u003c\/p\u003e\u003ch2\u003eEmergency LED tube kit for mains failure backup\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined kit\u003c\/strong\u003e, 180cm LED T8 tube plus the Liteplan NLP\/1S\/80-K conversion pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency duration\u003c\/strong\u003e, 3 hours from a LiFePO4 lithium iron phosphate battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED load range\u003c\/strong\u003e, suitable for loads operating between 6V and 80V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic current adjustment\u003c\/strong\u003e, matches output current to the battery and connected LED load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage emergency power\u003c\/strong\u003e, 2.6W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThird party tested\u003c\/strong\u003e, certified by TÜV.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e180cm LED T8 tube\u003c\/h3\u003e\u003cp\u003eThe tube included in the kit is a 180cm LED T8 rated at 32W with a normal light output of 3200 lumens. It fits compatible T8 linear fittings and suits indoor commercial and domestic upgrades.\u003c\/p\u003e\u003ch3\u003eLiteplan NLP\/1S\/80-K emergency pack\u003c\/h3\u003e\u003cp\u003eThe NLP\/1S\/80-K is a slim module built for integral use inside a luminaire. Deep discharge protection and battery temperature protection are built in, and power draw during charging is kept low. Its slim profile suits linear lighting layouts where space inside the fitting is limited.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe combined tube and conversion pack suits corridors, utility areas, commercial spaces, offices, workshops and other indoor locations that need emergency lighting backup during a power cut.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Warm White","offer_id":52096689176864,"sku":"EM+110823","price":62.84,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52096689209632,"sku":"EM+110824","price":62.84,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52096689242400,"sku":"EM+110825","price":62.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-em-110823-1.webp?v=1785767349"},{"product_id":"led-emergency-conversion-kit-lifepo4-nlp-1s-80-tp40","title":"LED Emergency Conversion Kit LiFePO4 Battery | Liteplan NLP\/1S\/80\/TP40","description":"\u003cp\u003eThe Liteplan NLP\/1S\/80\/TP40 is a 3-hour emergency lighting conversion kit built around a long life LiFePO4 battery. Supplied with strain relief cables for remote mounting, it converts a wide range of LED types and circuits using just two stock items, and fits into most standard existing fittings.\u003c\/p\u003e\u003ch2\u003eKey features of this led conversion kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim module\u003c\/strong\u003e, designed for linear applications with restricted space, suitable for apertures of 40mm or greater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery type\u003c\/strong\u003e, Long Life LiFePO4, giving double the life of traditional emergency lighting batteries and lower power consumption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep discharge protection\u003c\/strong\u003e, protects the battery pack during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage emergency power\u003c\/strong\u003e, 2.2W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, third party tested and certified by TÜV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus indication\u003c\/strong\u003e, a green LED shows the operating status of the unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe unit automatically adjusts the output LED current to match the battery to the load, giving the best available illumination while keeping full battery duration. It provides autonomy to LED panels for up to 3 hours at 30% reduced power, meeting the minimum legal requirement for emergency lighting. The kit can run in maintained or non-maintained mode.\u003c\/p\u003e\u003ch2\u003eCompatible panels\u003c\/h2\u003e\u003cp\u003eCompatible with 99% of LED panels, T8 tubes and LED downlights, including CoB spot luminaires. If you need the version for tube lights specifically, the NLP\/1S\/80 covers that application.\u003c\/p\u003e\u003ch2\u003eEnclosure and dimensions\u003c\/h2\u003e\u003cp\u003eThe inverter, battery and fused power connector block sit inside a galvanized enclosure. Module dimensions are 231 x 33.6 x 22.5mm, and the battery measures 94 x 34.5mm.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Default Title","offer_id":52096710410528,"sku":"NLP\/1S\/80\/TP40","price":52.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-nlp-1s-80-tp40-1.webp?v=1785768334"},{"product_id":"led-emergency-bulkhead-3w-ip42","title":"LED Emergency Bulkhead Light 3W IP42 100lm | Olympia","description":"\u003cp\u003eThis Olympia emergency bulkhead is a non-maintained \/ maintained LED exit sign fitting for indoor use, supplied with stickers and a 3-hour minimum autonomy on its Ni-Cd battery. It runs from a permanent mains supply and switches automatically to battery power if the mains fails.\u003c\/p\u003e\u003ch2\u003eKey features for led emergency lighting bulkhead\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating voltage\u003c\/strong\u003e, 220-240VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum power consumption\u003c\/strong\u003e, 3Watt\/3.5VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, Ni-Cd, 3.6V \/ 1Ah\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging time\u003c\/strong\u003e, 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum autonomous duration\u003c\/strong\u003e, 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination source\u003c\/strong\u003e, 12 LEDs, 100lm on emergency mode (230V AC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperation\u003c\/h2\u003e\u003cp\u003eUnder normal conditions the LED board stays lit and a green indicator shows the battery charging. On a power cut the LED strip is fed from the battery automatically, and normal mode resumes once mains power returns. A jumper lets the installer choose between non-maintained and maintained operation.\u003c\/p\u003e\u003ch3\u003eTesting\u003c\/h3\u003e\u003cp\u003eA TEST button checks the emergency circuit without cutting the mains supply. The indicator should be checked monthly, and the full 3-hour autonomy should be tested every 6 months by removing mains power and timing the duration. If autonomy has dropped well below 3 hours, replace the battery. Disconnect the battery via its connector if the fitting will be unused for more than 2 months.\u003c\/p\u003e\u003ch2\u003eStandards\u003c\/h2\u003e\u003cp\u003eProduced in Greece to EN 60598-1, EN 60598-2-22, EN 55015, EN 61547, EN 61000-3-2 and EN 61000-3-3, for use indoors at ambient temperatures up to 40C.\u003c\/p\u003e","brand":"Olympia","offers":[{"title":"Default Title","offer_id":52096710607136,"sku":"211077","price":24.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-led-emergency-bulkhead-3w-ip42-1.webp?v=1785768415"},{"product_id":"t8-led-tube-emergency-conversion-kit-em-110820","title":"T8 LED Tube 150cm 30W Emergency Conversion Pack | Liteplan NLP\/1S\/80-K","description":"\u003cp\u003eThis kit pairs a 150cm LED T8 tube with the Liteplan NLP\/1S\/80-K emergency conversion pack, giving a linear LED fitting the ability to keep working during a mains power failure. It suits corridors, offices, workshops, utility rooms and other indoor spaces where emergency backup lighting is needed.\u003c\/p\u003e\u003ch2\u003eT8 led tube and emergency conversion pack\u003c\/h2\u003e\u003cp\u003eThe 150cm tube runs at 30W and produces 3200 lumens of normal light output for everyday use. The NLP\/1S\/80-K is a slim module built for integral fitting inside a luminaire, and it works with LED loads across a 6V to 80V range. It uses a long life LiFePO4 lithium iron phosphate battery and automatically adjusts output current to match the connected battery and load.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined kit\u003c\/strong\u003e, 150cm LED T8 tube plus the NLP\/1S\/80-K conversion pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency duration\u003c\/strong\u003e, 3 hours during a mains failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED load range\u003c\/strong\u003e, suitable for loads from 6V to 80V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage emergency power\u003c\/strong\u003e, 2.6W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, long life LiFePO4 lithium iron phosphate cell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, deep discharge protection and battery temperature protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, third party tested and certified by TÜV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe kit fits into compatible T8 fittings and linear LED luminaires used in commercial and domestic buildings. It gives existing LED tube installations an emergency lighting function without needing separate emergency fittings, and the low power consumption during charging keeps standby draw modest.\u003c\/p\u003e\u003ch3\u003eSlim module design\u003c\/h3\u003e\u003cp\u003eThe conversion pack is built to sit inside the luminaire body rather than as an external unit, keeping the fitting's profile intact while adding emergency backup capability.\u003c\/p\u003e","brand":"Liteplan","offers":[{"title":"Warm White","offer_id":52096711885088,"sku":"EM+110820","price":59.54,"currency_code":"GBP","in_stock":true},{"title":"Natural White","offer_id":52096711917856,"sku":"EM+110821","price":59.54,"currency_code":"GBP","in_stock":true},{"title":"Cool White","offer_id":52096711950624,"sku":"EM+110822","price":59.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-em-110820-1.webp?v=1785768578"},{"product_id":"led-emergency-bulkhead-3w-ip65","title":"LED Emergency Bulkhead Light 3W IP65 130lm | Olympia","description":"\u003cp\u003eThe Olympia LED Emergency Bulkhead is a 3W LED fitting for maintained or non-maintained emergency lighting, built in polycarbonate and rated IP65 for internal or external use. It runs for a minimum of 3 hours in emergency mode and can be switched remotely.\u003c\/p\u003e\u003ch2\u003eKey features for LED emergency lighting bulkhead installs\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight output\u003c\/strong\u003e, 130 lumens from a 3W LED lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating modes\u003c\/strong\u003e, remote switching and non-maintained modes, plus maintained operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency duration\u003c\/strong\u003e, minimum 3 hours in emergency mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLamp life\u003c\/strong\u003e, 35,000 hours average life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, 3.6V, 1.5Ah Nickel Cadmium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, polycarbonate body, IP65 rated, slim and compact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eA hinged gear tray and push fit terminal block make wiring and servicing straightforward without removing the fitting from its mount. 20mm gland entries are fitted as standard, and the unit is suited to internal or external mounting positions where a slim, compact bulkhead is needed.\u003c\/p\u003e\u003ch2\u003eLegends and signage\u003c\/h2\u003e\u003cp\u003eA self-adhesive legend pack is included, offering a combination of symbols so the fitting can be set up for multiple exit path designations. An additional legend set, LGDSET, is available separately and can be used as extra legends or as individual stickers for walls and doors.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOlympia LED Emergency Bulkhead (LEDEME3W)\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive legend set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Olympia","offers":[{"title":"Default Title","offer_id":52096713818400,"sku":"LEDEME3W","price":32.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ledeme3w-1.webp?v=1785768875"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/led-emergency-lighting-drivers.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}