{"title":"Hytronik","description":"\u003cp\u003eHytronik make microwave presence sensors for lighting. Microwave detection sees movement through thin materials such as a fitting's diffuser, so the sensor can be hidden inside the luminaire rather than stuck on the outside of it.\u003c\/p\u003e\u003cp\u003eThe range covers attachable sensors that mount onto a fitting, detachable antenna versions for when the sensor body has to sit somewhere the antenna cannot, and SensorDIM drivers that combine the driver and the sensor in one unit. Bluetooth models let you set detection range, hold time and standby dimming from a phone instead of with a screwdriver and a ladder.\u003c\/p\u003e\u003cp\u003eThey are the usual answer for corridors, stairwells and stores where lights should not be on all day but should never leave anyone in the dark.\u003c\/p\u003e","products":[{"product_id":"hytronik-hc430s-microwave-sensor","title":"Hytronik HC430S Attachable Microwave Sensor On\/Off","description":"\u003cp\u003eThe Hytronik HC430S is an attachable microwave sensor with an on\/off switching function, built for fitting to the outside of commercial light fittings. It's intended for cases where a metallic body or louvre on the fixture would otherwise block microwave detection.\u003c\/p\u003e\u003cp\u003eAn optional external metal conduit can be added to extend the plastic conduit, useful where the recessed metal wall area is too thick for the standard conduit to pass through while keeping IP65 protection.\u003c\/p\u003e\u003ch2\u003eKey features of this microwave sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating voltage\u003c\/strong\u003e, 220-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitched power\u003c\/strong\u003e, Max. 400W (capacitive), Max. 800W (resistive)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby power\u003c\/strong\u003e, 0.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection area\u003c\/strong\u003e, 10\/30\/50\/75\/100%, can be customised\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold time\u003c\/strong\u003e, 5s\/30s\/180s\/300s\/15min\/25min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP20 \u0026amp; IP65\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eDesigned for commercial light fittings where the sensor needs to sit outside the fixture body. Three settings are adjustable on site: the detection area, the hold time, and the sensitivity of the photocell, so it can be tuned to the space it's controlling.\u003c\/p\u003e\u003ch3\u003eDetection and mounting\u003c\/h3\u003e\u003cp\u003eThe sensor works on microwave motion detection rather than passive infrared, letting it see through non-metallic housings. Detection range, angle and mounting height are all listed in the specification table below for reference during installation.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52049599430944,"sku":"HC430S\/R","price":43.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-hc430s-r-1.webp?v=1785330344"},{"product_id":"microwave-motion-sensor-bluetooth","title":"Hytronik Microwave Motion Sensor HC005\/BT | Bluetooth Control 400W","description":"\u003cp\u003eThe Hytronik HC005\/BT is a microwave motion sensor that switches LED lighting on and off using Bluetooth, with control from a mobile phone via the Koolmesh app. It works with single fittings or in groups using the 5.0 SIG Mesh Application, removing the need for hardwired switching between luminaires.\u003c\/p\u003e\u003ch2\u003eHow the microwave motion sensor works\u003c\/h2\u003e\u003cp\u003eThe sensor detects movement and turns lighting on, switching off again once a pre-selected hold time has passed with no motion detected. A built-in daylight sensor can also disable the light when there is enough natural light in the space, and this photocell function can be switched on or off as needed.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection range\u003c\/strong\u003e, 10 metres, with a coverage area of 10m x 30m indoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold time\u003c\/strong\u003e, adjustable from 5 seconds to 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotocell\u003c\/strong\u003e, integrated daylight sensor, can be enabled or disabled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, loop-in and loop-out terminals for straightforward installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching circuit\u003c\/strong\u003e, zero-crossing detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBluetooth app control\u003c\/h2\u003e\u003cp\u003eSetup and commissioning is handled through the Koolmesh app, which also supports grouping luminaires into a mesh network, three scene types, detailed sensor settings, scheduling by time and date, and an astro timer for sunrise and sunset. The system retains settings after a power loss, supports offline commissioning and network sharing, and can receive firmware updates over the air.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuitable for typical indoor spaces such as offices, classrooms, car parks, warehouses and other commercial or industrial areas where wireless lighting control is preferred over hardwired switching.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096611844384,"sku":"112005","price":49.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112005-1.webp?v=1785762026"},{"product_id":"microwave-motion-sensor-detachable-antenna","title":"Hytronik HC009S-KD Microwave Motion Sensor with Detachable Antenna","description":"\u003cp\u003eThe Hytronik HC009S-KD is a microwave motion sensor built for light fittings where space is tight, such as LED bulkheads, 2D lamps and LED tubes. It gives a 220-240V output signal with on\/off and dimming function, and detects movement across a 1-16m area. The antenna detaches from the sensor body, so only the small antenna needs to sit on the outer surface of the fitting while the sensor body and driver stay hidden behind the panel.\u003c\/p\u003e\u003cp\u003eMetal louvres on linear office lights block microwaves, which is a common problem for fittings with this kind of grille. The detachable antenna gets around this: clamp it onto a T5 or T8 tube on the outside of the fixture, and keep the sensor's main body behind the metal plate.\u003c\/p\u003e\u003ch2\u003eKey features of this microwave motion sensor light switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 220-240V, with on\/off and dimming function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection area\u003c\/strong\u003e, 1-16m, adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable antenna\u003c\/strong\u003e, clamps onto T5 and T8 tubes, separate from the sensor body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor principle\u003c\/strong\u003e, microwave motion detector, 5.8GHz +\/- 75MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to fittings where a full-size sensor won't fit inside the housing: LED bulkheads, 2D lamps and LED tubes, particularly in office lighting with metal louvred diffusers that would otherwise block microwave detection.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096611975456,"sku":"112018","price":52.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112018-1.webp?v=1785762033"},{"product_id":"led-driver-microwave-sensor-25w","title":"SensorDIM LED Driver 25W with Microwave Sensor | Hytronik HEC9025","description":"\u003cp\u003eThe Hytronik HEC9025 combines a constant current LED driver and a microwave motion sensor in a single unit, built for LED lights and LED boards up to 25 watt. Corridor function dimming and adjustable current levels let it match a range of fittings without extra control gear.\u003c\/p\u003e\u003ch2\u003eKey features of this led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor and driver 2-in-1\u003c\/strong\u003e, one unit handles detection and dimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 step dimming\u003c\/strong\u003e, corridor function for stepped light output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED current selection\u003c\/strong\u003e, adjustable current levels for different loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED max load and voltage\u003c\/strong\u003e, rated for LED lights and boards up to 25 watt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient daylight threshold\u003c\/strong\u003e, reacts to surrounding light levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 hour manual on mode\u003c\/strong\u003e, override for continuous operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to corridors, stairwells and similar spaces where a microwave motion sensor light switch and driver combination reduces the need for separate control units. The corridor function keeps a low light level between full detections rather than switching off completely.\u003c\/p\u003e\u003ch3\u003eDetection and control\u003c\/h3\u003e\u003cp\u003eSensing and dimming settings are adjustable, so the hold time, detection area and daylight threshold can be set to suit the installation once fitted.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096618594592,"sku":"112010","price":45.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112010-1.webp?v=1785762701"},{"product_id":"motion-sensor-led-driver-18w","title":"Microwave Motion Sensor LED Driver 18W IP20 | Hytronik HEC6018","description":"\u003cp\u003eThe Hytronik HEC6018 combines a microwave motion sensor and a constant current LED driver in a single casing, rated to power LED arrays and light fittings up to 18 watts. The output runs at 500mA, and a built-in daylight sensor is wired ahead of the motion sensor so the fitting only switches on when it is actually needed.\u003c\/p\u003e\u003ch2\u003eMotion sensor LED driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaylight threshold\u003c\/strong\u003e, selectable, so the driver ignores motion when there is already enough ambient light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-step dimming\u003c\/strong\u003e, 100%, dimmed, off, giving a light change notice before full switch-off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED max. load\u003c\/strong\u003e, 18W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection radius\u003c\/strong\u003e, 8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection height\u003c\/strong\u003e, 5m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e, IP20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eHytronik designed this driver for office spaces, meeting rooms and classrooms, where motion hold-time and a stand-by period can be set to suit occupancy patterns. The daylight threshold and detection area are both adjustable, so the same driver can be tuned to different rooms.\u003c\/p\u003e\u003ch3\u003eTiming and standby control\u003c\/h3\u003e\u003cp\u003eTwo selectable waiting periods are available: motion hold-time and a stand-by period. This lets an installer set how long the light stays at full output after movement stops, and how it dims down before switching off completely.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe sensor\/driver measures 119 x 53 x 26mm, a slim and compact shape that fits inside most light fixtures and LED fittings.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096622821664,"sku":"112006","price":38.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112006-1.webp?v=1785762817"},{"product_id":"daylight-sensor-switch-ds05","title":"Hytronik DS05 Daylight Sensor Photocell Switch 800W Max","description":"\u003cp\u003eThe Hytronik DS05 is a daylight sensor switch that gives automatic on\/off control to LED light fittings based on the level of natural light outside the fixture. It fits inside the luminaire and reads daylight through the diffuser or cover, so no drill hole is needed for detection.\u003c\/p\u003e\u003ch2\u003eDaylight sensor switch with advance detection\u003c\/h2\u003e\u003cp\u003eThe photocell technology in the DS05 tells natural daylight apart from the artificial light coming from the LED source it controls. That means it can sit behind a diffuser or fixture cover and still respond correctly to outdoor light levels, ignoring the light produced inside the fitting itself.\u003c\/p\u003e\u003ch3\u003eAdjustable lux threshold\u003c\/h3\u003e\u003cp\u003eAn installer sets the daylight threshold with the built-in DIP switches. Settings run from 2 lux up to 500 lux, with a disabled position for when photocell control is not wanted. Below the chosen level the connected light switches on; above it, the light stays off.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreshold range\u003c\/strong\u003e, 2, 10, 30, 50, 100, 300 or 500 lux, plus a disabled setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains input\u003c\/strong\u003e, 220-240VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e, 400VA capacitive \/ 800W resistive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm-up time\u003c\/strong\u003e, 20 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, loop-in and loop-out L and N terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, IP20, for indoor use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED ceiling lights, bulkhead fittings, corridor and stairwell lighting, and other commercial or communal indoor lighting where an internal, unobtrusive daylight control is preferred. Works equally in retrofit upgrades and new-build installations.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eFit the DS05 inside a suitable LED fixture where it can detect daylight through the cover or diffuser. A spacing of more than 2 metres between units is recommended to avoid false triggering, and installation should follow current wiring regulations.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096642449696,"sku":"DS05","price":17.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ds05-1.webp?v=1785764011"},{"product_id":"hytronik-hc009s-microwave-sensor","title":"Hytronik HC009S Eco Microwave Sensor 220-240V IP20","description":"\u003cp\u003eThe Hytronik HC009S Eco is a microwave motion sensor that switches a light on when it detects movement nearby and switches off again after a set hold time once the area is clear. A built-in daylight sensor can hold the light off when there is already enough natural light, and this photocell function can be switched on or off as needed.\u003c\/p\u003e\u003ch2\u003eKey features of this microwave motion sensor light switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection range\u003c\/strong\u003e, adjustable from 1 to 16 metres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-on time\u003c\/strong\u003e, adjustable from 5 seconds up to 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaylight sensor\u003c\/strong\u003e, integrated photocell, function can be enabled or disabled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection area\u003c\/strong\u003e, 12m x 6m\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe HC009S suits lighting circuits where presence detection and daylight cut-off are both wanted from a single sensor, with settings adjusted to match the space it covers.\u003c\/p\u003e\u003ch3\u003eAdjustable settings\u003c\/h3\u003e\u003cp\u003eRange and hold-on time are both set on the unit itself, so the same sensor can be tuned for a wide area with a long hold time or a narrower zone with a shorter one.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096659554592,"sku":"112003","price":24.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112003-1.webp?v=1785765748"},{"product_id":"hc005s-microwave-motion-sensor-switch","title":"Hytronik HC005S Microwave Motion Sensor Switch 220-240V","description":"\u003cp\u003eThe HC005S is a super-compact microwave motion sensor switch from Hytronik, built to turn lighting on when it detects movement and off again after a pre-set hold time once the area is clear. It runs from a 220-240V output signal and covers a detection range of 12m x 6m.\u003c\/p\u003e\u003cp\u003eA built-in daylight sensor can switch the light off when there is enough natural light available, and this photocell function can be enabled or disabled as needed. The hold-on time is adjustable from 5 seconds up to 30 minutes, letting installers fine-tune the sensor to the space it is fitted in.\u003c\/p\u003e\u003ch2\u003eKey features of this microwave motion sensor light switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 220-240V, on\/off function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection range\u003c\/strong\u003e, 12m x 6m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-on time\u003c\/strong\u003e, adjustable from 5 seconds to 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotocell\u003c\/strong\u003e, integrated daylight sensor, can be enabled or disabled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting height\u003c\/strong\u003e, 6 metres\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis sensor suits areas where lighting needs to respond to movement rather than stay on constantly, such as corridors, stairwells, storage areas and communal spaces. Its compact size makes it straightforward to fit alongside existing luminaires without much disruption to the ceiling or wall finish.\u003c\/p\u003e\u003ch3\u003eAdjustable settings\u003c\/h3\u003e\u003cp\u003eDetection area coverage and hold time can both be tuned to the installation, so the sensor can be set up for a wide open space or narrowed down for a tighter corridor.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096669942048,"sku":"112015","price":19.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112015-1.webp?v=1785766410"},{"product_id":"led-2d-emergency-battery-pack","title":"LED 2D Emergency Battery Pack 3 Hour Back-up | Hytronik HEM02-2D","description":"\u003cp\u003eThe Hytronik HEM02-2D emergency pack adds 3 hours of maintained or non-maintained emergency function to LED luminaires without any need to modify the existing LED circuit. Fit the emergency driver and battery and most LED fittings will operate as emergency lights.\u003c\/p\u003e\u003ch2\u003e2D led lamp emergency compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED array range\u003c\/strong\u003e, works with LED arrays from 8-60V, dimmed to 30% during emergency operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver function\u003c\/strong\u003e, automatically adjusts output LED current to match the battery and LED load for maximum illumination and battery duration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED compatibility\u003c\/strong\u003e, works with Philips Fortimo DLM, SLM and LLM ranges, Bridgelux LS\/ES\/RS ranges, Citizen 4-41W ranges, GE Infusion, Xicato and others\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLedison compatibility\u003c\/strong\u003e, compatible with Ledison 2D Lamps 12w and 16w standard version, and Ledison 2D Microwave sensor 12w and 16w\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConstant current power supply\u003c\/li\u003e\n\u003cli\u003eMaintain and non-maintain mode\u003c\/li\u003e\n\u003cli\u003eOver current protection for battery\u003c\/li\u003e\n\u003cli\u003eOver charge protection for battery\u003c\/li\u003e\n\u003cli\u003eGreen LED indication for status of the kit\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEmergency driver\u003c\/li\u003e\n\u003cli\u003e3.6V battery, high-temperature NiMH cells\u003c\/li\u003e\n\u003cli\u003eGreen LED indicator\u003c\/li\u003e\n\u003cli\u003eTest button\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFit this pack alongside an existing LED luminaire to provide emergency lighting cover without replacing the fitting itself. It suits commercial and industrial spaces where a maintained or non-maintained emergency function is required from standard LED arrays.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096676954400,"sku":"101015","price":46.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-101015-1.webp?v=1785766848"},{"product_id":"led-emergency-driver-battery-pack","title":"Hytronik HEM-02 Universal Emergency LED Driver \u0026 Battery Pack","description":"\u003cp\u003eThe Hytronik HEM-02 is an emergency LED driver and battery module that converts a wide range of LED luminaires and arrays for emergency operation. It fits into the low voltage connection between the mains LED driver and the LEDs, letting the fitting run as normal under mains healthy conditions and drop to reduced output if the mains supply fails.\u003c\/p\u003e\u003ch2\u003eLED emergency lighting conversion\u003c\/h2\u003e\u003cp\u003eThe driver automatically adjusts its output current to match the battery to the connected load, balancing illumination against battery duration. It works with a wide range of LED types, including Philips Fortimo DLM, SLM and LLM ranges, Bridgelux LS\/ES\/RS ranges, Citizen 4-41W ranges, GE Infusion and Xicato, alongside many other common LED arrays.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic adjustment\u003c\/strong\u003e, matches battery output to the connected LED load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay configuration\u003c\/strong\u003e, 2-pole changeover relay with an additional 3rd pole relay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery protection\u003c\/strong\u003e, deep discharge protection paired with a constant current charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery type\u003c\/strong\u003e, high-temperature NiCd cells (Yuasa)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, works with Ledison LED Tubes and 2D Lamps in 12W, 16W and 9W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis module suits installers converting standard mains LED fittings, such as tubes, 2D lamps and LED arrays, into maintained emergency luminaires without replacing the existing driver setup. It is fitted inline between the mains driver and the LED load, and switches over automatically on mains failure.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBattery NiCd\u003c\/li\u003e\n\u003cli\u003eCable with green LED indicator, 25cm lead length\u003c\/li\u003e\n\u003cli\u003eTest button\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096686031136,"sku":"101015-2","price":46.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-101015-1_77ba5cf1-382b-4d8a-bbd5-df965d87662c.webp?v=1785767236"},{"product_id":"microwave-motion-sensor-false-ceiling","title":"Hytronik HC009S\/EXT Microwave Sensor | False Ceiling","description":"\u003cp\u003eThe Hytronik HC009S\/EXT is a microwave occupancy sensor built for false or plasterboard ceilings, with an integrated photocell. It sits hidden above the ceiling line and remotely switches LED loads up to 1200W, so it works even when the light fitting itself has no room for an internal sensor.\u003c\/p\u003e\u003ch2\u003eKey features of the microwave sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection method\u003c\/strong\u003e, microwave technology using Doppler Frequency, sending radio waves and reading the reflected energy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliability\u003c\/strong\u003e, more reliable at detecting movement than infrared sensors and lasts five times longer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e, larger elliptical coverage than IR, picking up motion only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad handling\u003c\/strong\u003e, remotely switches LED loads up to 1200Watt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse time\u003c\/strong\u003e, lights switch on within milliseconds of detecting movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimer\u003c\/strong\u003e, lights switch off after a user-defined time scale once movement stops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotocell\u003c\/strong\u003e, integrated photocell included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe HC009S\/EXT is intended for small light fittings where a sensor cannot be fitted internally. A common project is an office with a false or plasterboard ceiling lit by 600x600 LED panels: the sensor mounts above the ceiling, invisible from below, and controls the panels remotely.\u003c\/p\u003e\u003ch3\u003eFalse ceiling installation\u003c\/h3\u003e\u003cp\u003eBecause the sensor sits above the ceiling tile rather than in the fitting itself, the surface finish stays clean with no visible sensor housing, while the microwave detection still reads movement in the room below.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096694518048,"sku":"112017","price":27.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112017-1.webp?v=1785767504"},{"product_id":"microwave-motion-sensor-ceiling-switch","title":"Microwave Motion Sensor Ceiling Switch 360\ff IP20 | Hytronik HMW28","description":"\u003cp\u003eThe Hytronik HMW28 is a flush-mounted microwave motion sensor for ceiling installation, replacing the discontinued HC008S, HC002S and HMW20. It switches lighting on when it detects movement and turns it off again after a chosen hold time if no motion is picked up.\u003c\/p\u003e\u003ch2\u003eMicrowave motion sensor light switch features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection angle\u003c\/strong\u003e, 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitched load\u003c\/strong\u003e, up to 800W resistive and up to 800W inductive\/capacitive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaylight sensor\u003c\/strong\u003e, built-in photocell switches off the load when there is enough natural light, with an adjustable threshold that can also be disabled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-out diameter\u003c\/strong\u003e, 78mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e, 73mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable settings\u003c\/strong\u003e, detection area, hold time and daylight threshold can all be set by the installer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFitted discreetly into plasterboard, suspended, false or wooden ceilings, with the photocell integrated into the top of the unit. Suited to corridors, offices, stairwells and other spaces where lights should respond automatically to occupancy and available daylight.\u003c\/p\u003e\u003ch3\u003eAdjustability\u003c\/h3\u003e\u003cp\u003eEvery parameter is user adjustable, so the sensor can be tuned to the room rather than left on factory defaults. The daylight function can be switched off entirely if the sensor needs to operate regardless of ambient light.\u003c\/p\u003e\u003cp\u003eFor design advice on siting or wiring this sensor, contact the technical team.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"No","offer_id":52096695796000,"sku":"112022","price":73.4,"currency_code":"GBP","in_stock":true},{"title":"Yes","offer_id":52096695828768,"sku":"112022+112023","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112022-1.webp?v=1785767565"},{"product_id":"microwave-motion-sensor-external-mount","title":"HC030S Microwave Motion Sensor 800W IP20\/IP65 | Hytronik","description":"\u003cp\u003eThe Hytronik HC030S is an external mount microwave motion sensor built for automated lighting control. It switches connected lights on when it detects movement and off again after a set hold time, with a built-in daylight sensor to stop activation when there's enough natural light.\u003c\/p\u003e\u003ch2\u003eKey features of the hytronik microwave sensor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn\/off control\u003c\/strong\u003e, detects motion and manages light activation based on presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaylight sensor\u003c\/strong\u003e, customisable settings for daylight, twilight and darkness operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable hold time\u003c\/strong\u003e, 10 seconds to 30 minutes to keep lights on after movement stops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomisable detection area\u003c\/strong\u003e, coverage adjustable from 10% to 100%.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOperating voltage 220-240V AC\u003c\/li\u003e\n\u003cli\u003eSwitched power capacity up to 800W (capacitive)\u003c\/li\u003e\n\u003cli\u003eDetection range up to 18m diameter with a 10m maximum mounting height\u003c\/li\u003e\n\u003cli\u003eIP20 or IP65 when mounted in Hytronik's special box\u003c\/li\u003e\n\u003cli\u003eOperating temperature range -20°C to +60°C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe HC030S suits new installations and retrofit projects where automated, energy aware lighting control is needed outdoors or in areas with variable daylight. Optional external metal conduit and double insulation cables are available for extended durability.\u003c\/p\u003e\u003ch2\u003eCertification\u003c\/h2\u003e\u003cp\u003eThe sensor carries certification from Semko, EMC, CE, R\u0026amp;TTE and SAA.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096702349600,"sku":"112024","price":30.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112024-1.webp?v=1785767849"},{"product_id":"microwave-sensor-ip65-enclosure","title":"Hytronik IP65 Enclosure Box for Microwave Sensors | 135mm","description":"\u003cp\u003eAn IP65 enclosure box designed for installing Hytronik microwave sensors outdoors. It gives you a safe, weatherproof way to fit a sensor where it will face rain, dust or damp conditions.\u003c\/p\u003e\u003cp\u003eThe box is made from transparent polycarbonate, which lets the built-in daylight sensor on the microwave unit keep working normally once enclosed. That means the sensor can still respond to ambient light levels as intended, even mounted inside the box.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating\u003c\/strong\u003e, IP65, dust tight and protected against water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e, 135 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e, transparent polycarbonate housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, designed for Hytronik microwave sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to environments with high humidity or exposure to the weather, where a microwave sensor would otherwise be at risk. Any standard LED light can be controlled independently once paired with a microwave sensor housed in this box.\u003c\/p\u003e\u003ch3\u003eSensor compatibility\u003c\/h3\u003e\u003cp\u003eThe microwave sensor itself is not included. Hytronik's HC008S and HC009S are commonly used with this enclosure. The two differ mainly in detection range: the HC009S detects movement from 1m up to 12 metres.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096702677280,"sku":"112013","price":19.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112013-1.webp?v=1785767877"},{"product_id":"microwave-motion-sensor-high-bay","title":"Hytronik HC430S Microwave Motion Sensor for High Bay Lights","description":"\u003cp\u003eThe Hytronik HC430S is a stand-alone microwave motion sensor built for high ceiling installations, with simple on\/off operation and no separate controller needed. It attaches directly to metal and aluminium louvre fittings, including high bay lights.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting height\u003c\/strong\u003e, up to 15 metres maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold-on time\u003c\/strong\u003e, adjustable from 5 seconds to 30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching capacity\u003c\/strong\u003e, 400 Watt at 240VAC load voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable settings\u003c\/strong\u003e, detection area, hold-on time and daylight lux level all set via switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation\u003c\/strong\u003e, stand-alone device with straightforward on\/off switching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to warehouses, storage rooms and industrial units where high bay led lights and linear lighting are fitted at height. The reinforced housing works with non-corrosive fittings commonly used in these environments.\u003c\/p\u003e\u003ch3\u003eAdjustable controls\u003c\/h3\u003e\u003cp\u003eDetection area, hold-on time and daylight lux threshold are each tuned with onboard switches, letting the sensor be matched to traffic levels and ambient light in the space it covers.\u003c\/p\u003e","brand":"Hytronik","offers":[{"title":"Default Title","offer_id":52096711557408,"sku":"112014","price":35.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-112014-1.webp?v=1785768504"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/hytronik.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}