{"title":"Micro Inverters","description":"\u003cp\u003eMicro inverters for grid-tied solar setups, built to work with single, double or quadruple MPPT inputs and matched to monocrystalline panels rated from 200 watts up to 650 watts. They convert DC output from one or more panels directly to 230Vac, making them a practical option where roof space or budget only allows for a single panel install.\u003c\/p\u003e\u003cp\u003eThis range includes the Voltacon MicroInverter VMI range alongside the cables and accessories needed to install and monitor them: extension cables with UK 3-pin plugs, branch connectors for linking multiple units, and an Ethernet gateway for online monitoring of VMI-version inverters.\u003c\/p\u003e\u003cp\u003eInstallation is plug-and-play, aimed at DIY installers as well as trade, with no licence or certification required to fit them. Products are certified to meet UK and European grid standards.\u003c\/p\u003e","products":[{"product_id":"vmi-inverter-extension-cable-1m","title":"1m VMI Microinverter Extension Cable 230Vac | Voltacon","description":"\u003cp\u003eThis 1m extension cable connects a Voltacon VMI microinverter to a junction box or consumer unit. One end fits the inverter's female AC output with a male connector; the other end is left open with three cores for wiring in.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 1 metre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, male AC connector to open 3-core end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCores\u003c\/strong\u003e, live, neutral and earth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type\u003c\/strong\u003e, waterproof, suitable for outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, Voltacon VMI microinverter female AC output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed as the first connection point in a VMI microinverter AC bus chain, linking the inverter's output to a junction box or consumer unit. Suits installations where the run needs to be wired directly rather than through another inline connector.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis cable carries mains AC voltage. It must be installed by a qualified electrician, with the open end correctly terminated and protected. Wiring must comply with IET Wiring Regulations and G98 requirements.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053860679968,"sku":"3PIN-230V-EXT","price":8.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-3pin-230v-ext-1.webp?v=1785421231"},{"product_id":"600w-solar-microinverter-single-mppt","title":"600W Solar Microinverter G98 Single MPPT WIFI | Voltacon VMI600","description":"\u003cp\u003eThe Voltacon VMI600 is a 600W grid-tied micro solar inverter with integrated Wi-Fi monitoring, built for single-panel installations. It tracks the maximum power point of one module rather than an entire array, which helps recover lost yield when shading or mismatched orientation would otherwise drag down a whole string. It is G98 compliant and ENA registered (ZHEJI\/15702\/V1\/A1) for UK grid-connected solar.\u003c\/p\u003e\u003ch2\u003eKey features of this micro solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 600W rated AC output, 620VA peak.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT range\u003c\/strong\u003e, 24-50V, with an operating range of 16-60V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput current\u003c\/strong\u003e, 18A max input, 20A max short circuit current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel compatibility\u003c\/strong\u003e, 400-670W panels, 60-75 full cells or 120-150 half cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 96.5% peak, 96% European.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower quality\u003c\/strong\u003e, power factor greater than 0.99, THD below 3%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP67 enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eA string inverter reads the array as one combined signal, so a shaded or dirty panel pulls the whole line down with it. The VMI600 sits on a single module and tracks its own MPPT independently, so one underperforming panel does not cost the neighbouring ones their output. Built-in Wi-Fi reports generation and status directly from each unit, without a separate monitoring gateway.\u003c\/p\u003e\u003cp\u003eInside, the VMI600 uses GaN MOSFETs with no electrolytic capacitors and no cooling fan, cutting down on the parts most likely to wear out. A high-frequency transformer keeps the PV input electrically isolated from the AC output. Up to 8 units can be connected on a single string using a 24A circuit breaker and 10AWG cable.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuits residential roofs with partial shading, roofs with more than one orientation, building-integrated PV on walls or awkward surfaces, and commercial arrays where module-level monitoring is worth having.\u003c\/p\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation should be carried out by a qualified electrician or MCS-accredited installer. G98 notification to the DNO is required before connection, and AC wiring, protection and earthing must follow IET Wiring Regulations. The VMI600 needs a live grid connection to operate and will not run off-grid or alongside off-grid inverters.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eCovered by a 10-year standard warranty, with a 25-year extended warranty available as an option.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52053861269792,"sku":"BYM600-WIFI-2","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bym600-wifi-1.webp?v=1785421390"},{"product_id":"microinverter-branch-cable-kit","title":"Microinverter AC Bus Branch Cable 1 to 8 Way | Voltacon VMI","description":"\u003cp\u003eThese pre-assembled AC bus branch cables let you wire multiple Voltacon VMI500 and VMI600 micro inverters together on a shared single phase AC bus. Configurations run from 1 inverter up to 8, each cable factory-made with SINBON connectors and fixed lengths, so there is no on-site crimping or connector assembly to get wrong.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, pre-assembled SINBON connectors, factory-made cable assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem size\u003c\/strong\u003e, available for 1 to 8 VMI micro inverters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInter-inverter length\u003c\/strong\u003e, 2.4m cable between each inverter in the chain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTermination length\u003c\/strong\u003e, 2m cable from the last inverter to the UK socket or AC termination\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating\u003c\/strong\u003e, waterproof connectors rated for outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, for use with Voltacon VMI500 and VMI600 micro inverters only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eIn a multi micro inverter installation, each inverter's AC output is daisy-chained into a shared AC bus before it reaches the consumer unit. These factory cables remove the need for any on-site wiring work at the connector stage, which cuts install time and takes out a common source of wiring errors. Choose the number of inverters in your system at checkout and you get the matching cable configuration.\u003c\/p\u003e\u003cp\u003eA 5m UK plug extension cable, sold separately, connects the last inverter in the chain to a standard 230VAC wall socket to complete the run.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed for parallel AC bus wiring on Voltacon VMI micro inverter installations, including rooftop, facade and balcony solar micro inverter systems.\u003c\/p\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThese cables carry mains AC voltage. Installation must be carried out by a qualified electrician, in line with IET Wiring Regulations and G98 requirements for UK grid-connected micro inverter systems. Do not exceed the rated current for the number of inverters connected in the AC bus chain.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"1-Way AC Connector 2.4m Cable","offer_id":52060749988128,"sku":"Y3-12AWG-VMI","price":20.95,"currency_code":"GBP","in_stock":true},{"title":"2-Way AC Connector 2.4m Cable","offer_id":52060750020896,"sku":"Y3-12AWG-VMI-2","price":48.51,"currency_code":"GBP","in_stock":true},{"title":"3-Way AC Connector 2.4m Cable","offer_id":52060750053664,"sku":"Y3-12AWG-VMI-3","price":65.05,"currency_code":"GBP","in_stock":true},{"title":"4-Way AC Connector 2.4m Cable","offer_id":52060750086432,"sku":"Y3-12AWG-VMI-4","price":87.1,"currency_code":"GBP","in_stock":true},{"title":"5-Way AC Connector 2.4m Cable","offer_id":52060750119200,"sku":"Y3-12AWG-VMI-5","price":109.15,"currency_code":"GBP","in_stock":true},{"title":"6-Way AC Connector 2.4m Cable","offer_id":52060750151968,"sku":"Y3-12AWG-VMI-6","price":131.2,"currency_code":"GBP","in_stock":true},{"title":"7-Way AC Connector 2.4m Cable","offer_id":52060750184736,"sku":"Y3-12AWG-VMI-7","price":142.22,"currency_code":"GBP","in_stock":true},{"title":"8-Way AC Connector 2.4m Cable","offer_id":52060750217504,"sku":"Y3-12AWG-VMI-8","price":153.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-y3-12awg-vmi-1.webp?v=1785502738"},{"product_id":"600w-microinverter-single-mppt","title":"600W Grid-Tied Solar Microinverter IP67 | Voltacon VMI600","description":"\u003cp\u003eThe Voltacon VMI600 is a 600W single phase grid-tied micro inverter with integrated Wi-Fi monitoring, built for single panel installations. It performs individual maximum power point tracking at module level, which helps recover lost yield when panels are partially shaded or face different directions. It is G98 compliant and ENA registered, making it suitable for UK residential and commercial grid-connected solar systems.\u003c\/p\u003e\u003ch2\u003eMicro inverter features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 600W rated, 620VA peak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT\u003c\/strong\u003e, single MPPT per unit, voltage range 24-50V, operating range 16-60V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput current\u003c\/strong\u003e, max 18A, max short circuit current 20A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel compatibility\u003c\/strong\u003e, 400-670W panels (60-75 full cells or 120-150 half cells)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 96.5% peak, 96% European\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower quality\u003c\/strong\u003e, power factor greater than 0.99, THD less than 3%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP67 weatherproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, integrated Wi-Fi, no separate hub required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eA string inverter tracks an entire array as one unit, so shading or soiling on a single panel drags down the whole string's output. The VMI600 tracks each panel on its own MPPT, so one weak panel does not pull down the rest of the array. GaN MOSFET technology is used with no electrolytic capacitors or cooling fans, and a high-frequency transformer provides electrical isolation between the PV input and the AC output. Up to 8 units can be connected per string.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential rooftops with partial shading or mixed panel orientations, building-integrated PV on walls or irregular surfaces, and commercial installations where module-level monitoring is wanted.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited solar installer. G98 notification to the DNO is required before connection. The VMI600 needs a live grid connection to operate and will not run off-grid or in parallel with off-grid inverters.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060751036704,"sku":"BYM600-WIFI","price":124.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-bym600-wifi-1_5d8bec2a-beac-4e1c-86ed-c29b4678c850.webp?v=1785503008"},{"product_id":"micro-inverter-extension-cable-uk-plug","title":"5m Extension Cable UK 13A Plug for VMI Micro Inverters | Voltacon","description":"\u003cp\u003eThis 5-metre outdoor rubber extension cable connects a Voltacon VMI microinverter to the mains, fitted with a UK 13A 3-pin plug. Use it to link the final inverter in an AC bus chain to a mains socket, or to wire a single VMI microinverter straight into a 230VAC outlet.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 5 metres of heavy-duty rubber-insulated cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug\u003c\/strong\u003e, UK 13A 3-pin plug fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, connects to Voltacon VMI microinverter AC output connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse case\u003c\/strong\u003e, single inverter direct connection or final cable in a multi-inverter AC bus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, rated for outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eIn a multi-microinverter setup, each inverter's AC output joins a shared bus using branch connector cables. This extension forms the last link in that chain, running from the final inverter to the mains socket or AC termination point. The rubber sheath gives it flexibility and UV resistance, suited to rooftop and wall-mounted outdoor runs.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConnecting a single VMI microinverter to a 230VAC UK socket\u003c\/li\u003e\n\u003cli\u003eFinal connection in a multi-VMI microinverter AC bus\u003c\/li\u003e\n\u003cli\u003eBalcony and plug-in solar systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eThis cable carries mains AC voltage in use, so all AC connections must be made by someone competent in electrical installation. UK grid-connected microinverter systems must meet G98 requirements and be notified to the DNO before connection.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060753068320,"sku":"PWR4MM5M-UK","price":35.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pwr4mm5m-uk-1.webp?v=1785503462"},{"product_id":"vmi-ethernet-monitoring-gateway","title":"Ethernet Gateway for VMI Micro Inverters | Online Monitoring","description":"\u003cp\u003eThe VMI monitoring gateway communicates with Voltacon VMI microinverters via PLCC\/Zigbee and connects to the internet using a standard Ethernet cable from your router. One gateway is needed per installation, no matter how many microinverters are in the system. It gives panel-level monitoring and management of every inverter from a mobile or desktop browser.\u003c\/p\u003e\u003ch2\u003eEthernet gateway for micro inverters\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, PLCC\/Zigbee link to all VMI microinverters in the system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternet connection\u003c\/strong\u003e, Ethernet cable to router or network switch, no Wi-Fi support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e, one gateway monitors an entire VMI installation regardless of inverter count\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e, mobile app and desktop browser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData\u003c\/strong\u003e, panel-level generation figures for each inverter and its solar panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManagement\u003c\/strong\u003e, remote monitoring of individual microinverters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe gateway reads performance data from each VMI microinverter and uploads it to the online monitoring platform, so real-time and historical generation figures per panel are visible. This panel-level view makes it straightforward to spot an underperforming or faulted inverter without a site visit.\u003c\/p\u003e\u003cp\u003eA standard Ethernet cable must run from the gateway to the nearest router or switch. The gateway itself has no Wi-Fi connection for internet access. One unit is sufficient for the whole VMI installation.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to performance monitoring on residential and commercial VMI microinverter installations, and for remote fault identification and generation reporting.\u003c\/p\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThe gateway is a low-voltage communications device. The VMI microinverters it monitors carry mains AC and DC solar voltages, and must only be installed or serviced by a qualified electrician. A stable Ethernet network connection should be available at the installation site.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060755919136,"sku":"BYR990","price":187.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-byr990-1.webp?v=1785503919"},{"product_id":"micro-inverter-extension-cable-230vac","title":"1m AC Extension Cable Male\/Female 3 Pin 230Vac | VMI","description":"\u003cp\u003eThis 1-metre extension cable links two Voltacon VMI microinverters in a daisy-chain AC bus parallel connection, using male and female 3-pin 230VAC connectors. It runs the female AC output of one microinverter to the male AC input of the next in the chain.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 1m with male and female 3-pin AC connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse\u003c\/strong\u003e, daisy-chains VMI microinverters in a parallel AC bus setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e, live, neutral and earth connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors\u003c\/strong\u003e, waterproof, rated for outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, Voltacon VMI microinverters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eThis cable carries mains AC voltage. It must be connected by a qualified electrician, with all wiring complying with IET Wiring Regulations and G98 requirements for UK grid-connected microinverter systems.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eUsed on residential and small commercial solar arrays where several VMI microinverters are linked on a shared AC bus, keeping the run between adjacent units tidy and outdoor-rated.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060759490848,"sku":"EXT-CABLE-VMI","price":8.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ext-cable-vmi-1.webp?v=1785504412"},{"product_id":"vmi-micro-inverter-extension-cable-5m","title":"5m Extension Cable for VMI Micro Inverters | UK or EU Plug","description":"\u003cp\u003eThis 5-metre outdoor extension cable connects Voltacon VMI solar micro inverters to a standard 230VAC mains socket. Choose a UK 13A 3-pin plug or an EU plug at checkout. It can link a single micro inverter straight to the wall, or act as the final cable in a multi-inverter AC bus.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e, 5 metres of heavy-duty rubber-insulated cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug options\u003c\/strong\u003e, UK 13A 3-pin plug or EU plug, selected at checkout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e, fits Voltacon VMI microinverter AC output connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse case\u003c\/strong\u003e, single inverter connection or final link in a multi-inverter AC bus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e, rubber outer sheath rated for outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eFor a single micro inverter setup, the cable runs from the VMI unit direct to a 230VAC wall socket, giving a straightforward connection for balcony or plug-in solar systems. In a daisy-chained arrangement it forms the last link between the final inverter and the AC bus connection point, with earlier units joined by Betteri AC branch connector cables sold separately. The rubber sheath suits rooftop and wall-mounted runs exposed to weather.\u003c\/p\u003e\u003ch3\u003eInstallation and safety notes\u003c\/h3\u003e\u003cp\u003eThis cable carries mains AC voltage in operation, so connections should only be made by someone competent in electrical work. It is not intended for indoor use without adequate ventilation, and must not be modified, extended, or loaded beyond its rated current. UK grid-connected microinverter systems must meet G98 requirements.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"UK 3 Pin Plug","offer_id":52060762046752,"sku":"PWR4MM5M-UK-EU","price":33.06,"currency_code":"GBP","in_stock":true},{"title":"EU 2 Pin Schuko Plug","offer_id":52060762079520,"sku":"PWR4MM5M-UK-EU-2","price":33.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-pwr4mm5m-uk-eu-1.webp?v=1785505061"},{"product_id":"ac-connector-pair-vmi-microinverter","title":"Betteri AC Connector Pair 3 Pin 240VAC | VMI Micro Inverters","description":"\u003cp\u003eThis Betteri AC connector pair gives you a waterproof male and female 3-pin 240VAC coupling for the AC output side of VMI solar microinverters. Built for outdoor use with double-insulated 4mm power cable, the pair lets you join microinverter AC outputs together in a daisy-chain AC bus configuration.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair supplied\u003c\/strong\u003e, 1x male and 1x female Betteri 3-pin AC connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage\u003c\/strong\u003e, 240VAC single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e, waterproof, suited to outdoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable compatibility\u003c\/strong\u003e, double-insulated 4mm AC power cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for\u003c\/strong\u003e, Voltacon VMI microinverters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction\u003c\/strong\u003e, enables daisy-chain AC bus wiring between multiple microinverters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eOn a multi-microinverter array, each unit's AC output joins a shared AC bus before it heads to the consumer unit. These Betteri connectors form the coupling point between adjacent microinverters in the string. The last unit in the chain connects to the AC bus extension cable, or straight to a 230VAC socket via the compatible 5m extension cable, sold separately.\u003c\/p\u003e\u003cp\u003eThe waterproof housing is intended to hold up in outdoor conditions: rain, temperature swings, rooftop and wall-mounted positions.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAC bus wiring between multiple Voltacon VMI microinverters\u003c\/li\u003e\n\u003cli\u003eOutdoor microinverter AC coupling on rooftop and facade installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eThese connectors carry mains AC voltage. Installation must be carried out by a qualified electrician and comply with IET Wiring Regulations. Never connect or disconnect under load. The cable used must be rated for the current of every microinverter joined on that AC bus chain.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060766142752,"sku":"002492","price":15.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002492-1.webp?v=1785505358"},{"product_id":"solar-micro-inverter-bym2000-2000w","title":"Voltacon BYM2000 2000W Quattro MPPT Micro Inverter 230V IP67","description":"\u003cp\u003eThe Voltacon BYM2000 is a 2000W solar micro inverter with four independent MPPT trackers, one for each connected panel. Output is 230V AC, and the IP67-rated enclosure allows outdoor mounting close to the array. This is a grid-connected micro inverter solar panels solution designed for module-level performance management.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output\u003c\/strong\u003e, 2000VA at 230V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT trackers\u003c\/strong\u003e, 4 independent channels, one per panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel capacity\u003c\/strong\u003e, up to 4 solar panels per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP67 waterproof and dustproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication\u003c\/strong\u003e, PLCC standard, WiFi optional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e, up to 25 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eWhere a string inverter shares one or two MPPT channels across a whole array, the BYM2000 gives each panel its own tracker. A shaded, dirty or underperforming panel does not pull down the output of the others. That matters on roofs with mixed orientations, partial shading from chimneys or neighbouring buildings, or panels split across more than one pitch.\u003c\/p\u003e\u003cp\u003eThe design is AC-coupled, so DC wiring stays short and confined to the mounting area. Only 230V AC cabling runs back to the consumer unit, which keeps high-voltage DC out of the building fabric.\u003c\/p\u003e\u003cp\u003ePLCC communication is standard. The optional WiFi module adds module-level monitoring, so the output of each panel can be checked through an app.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential rooftop systems with mixed orientations or partial shading\u003c\/li\u003e\n\u003cli\u003eGarden rooms, garages, outbuildings and small commercial premises\u003c\/li\u003e\n\u003cli\u003eBalcony and small-array solar installations\u003c\/li\u003e\n\u003cli\u003eSystems needing module-level monitoring\u003c\/li\u003e\n\u003cli\u003eInstallations where minimising DC cable runs matters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Voltacon BYM2000 micro inverter unit\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFit in accordance with current wiring regulations and the BYM2000 installation manual. Grid connection in the UK requires G98 compliance, and installation must be carried out by a qualified MCS-accredited installer. Allow adequate airflow around the enclosure despite the IP67 rating.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52061010624800,"sku":"002973","price":199.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002973-1.webp?v=1785508552"},{"product_id":"dual-mppt-micro-inverter-1000w","title":"1000W Solar Micro Inverter Dual MPPT IP67 230V | Voltacon BYM1000","description":"\u003cp\u003eThe Voltacon BYM1000 is a 1000W micro inverter with two independent MPPT trackers for grid-connected solar installations. Each panel gets its own dedicated MPPT channel, so shading or performance variation on one panel does not affect the other. Output is 230V AC with a peak efficiency of 96.5%, and the enclosure carries an IP67 rating for outdoor mounting near or behind the panels.\u003c\/p\u003e\u003ch2\u003eKey features of this micro solar inverter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput\u003c\/strong\u003e, 1000VA rated at 230V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT trackers\u003c\/strong\u003e, 2 independent channels, one per panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, 96.5% peak, MPPT efficiency above 99.8%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage range\u003c\/strong\u003e, MPPT 24V to 50V, operating range 16V to 60V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower quality\u003c\/strong\u003e, power factor above 0.99, THD below 4%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, IP67 waterproof and dustproof enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and construction\u003c\/h2\u003e\u003cp\u003eA high-frequency transformer provides galvanic isolation between the DC input and AC output, improving safety and cutting conducted interference on the AC side. Communication runs over PLCC, with WiFi available as an option. The unit measures 272.9 x 260.9 x 34.5mm and weighs 2.39kg, light enough to mount directly to a panel frame or rafter bracket without extra structural support. It carries a warranty of up to 25 years.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential rooftops with 2-panel arrays or partial shading, balcony solar systems, garden rooms and outbuildings, and any installation where module-level monitoring or reduced DC cabling is wanted.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eInstallation must be carried out by a qualified MCS-accredited installer, with UK grid connection meeting G98 compliance. Follow the BYM1000 installation manual, allow adequate airflow around the enclosure, and check the MPPT voltage range against the panels being used before fitting.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Voltacon BYM1000 micro inverter unit\u003c\/li\u003e\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52061013344544,"sku":"002974","price":157.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002974-1.webp?v=1785508995"},{"product_id":"balcony-solar-kit-930w-micro-inverter","title":"JA Solar 930W Balcony Solar Kit with 1000VA Micro Inverter | BYM1000","description":"\u003cp\u003eA complete balcony or garden solar kit from JA Solar, pairing two 465W full-black solar panels with a BYM1000 dual-input micro inverter for a combined solar-panel capacity of 930W and a rated inverter output of 1000VA.\u003c\/p\u003e\u003ch2\u003eSolar panel with micro inverter, matched as a set\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e, 2 x JA Solar 465W full-black panels, 930W combined capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro inverter\u003c\/strong\u003e, BYM1000, 1000VA output with two independent MPPT trackers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT arrangement\u003c\/strong\u003e, each panel connects to its own MPPT input, so shading or orientation differences on one panel do not restrict the other\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC output\u003c\/strong\u003e, 230V single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP67 weather-resistant inverter housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, optional Wi-Fi or PLCC depending on the inverter version supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, solar-panel mounting brackets included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to gardens, patios, terraces, structurally suitable balconies, garages, workshops and outbuildings, or as a small grid-connected residential system. Actual generation depends on location, panel orientation, mounting angle, shading and weather.\u003c\/p\u003e\u003ch3\u003eImportant UK installation note\u003c\/h3\u003e\u003cp\u003eThis kit uses a 1000VA micro inverter, which sits outside the UK's 800VA plug-in microgenerator category. It must not be connected to a standard UK wall socket under the plug-in solar regulations. Installation in Great Britain must meet the applicable electrical, building, planning and Distribution Network Operator requirements, and installation by a qualified solar PV electrician is recommended. Customers outside Great Britain should confirm local grid-connection rules before connecting the system.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 x JA Solar 465W full-black solar panels\u003c\/li\u003e\n\u003cli\u003e1 x BYM1000 1000VA dual-input micro inverter\u003c\/li\u003e\n\u003cli\u003e1 x AC connection cable (supplied according to destination and installation method)\u003c\/li\u003e\n\u003cli\u003eSolar-panel mounting brackets\u003c\/li\u003e\n\u003cli\u003ePanel-to-inverter connection components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JA Solar","offers":[{"title":"Default Title","offer_id":52204027871520,"sku":"003016-930W","price":376.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-003016-930w-1.webp?v=1787069169"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/grid-tied-micro-inverters.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}