{"title":"Grid with ESS","description":"\u003cp\u003eA hybrid inverter sits alongside your existing electricity supply, running your home on a dual-fed system where power from solar panels and batteries is used first. The grid stays connected as a backup, letting you top up batteries overnight at cheaper rates or draw extra power to cover surges in household demand.\u003c\/p\u003e\u003cp\u003eThis range covers complete kits pairing an inverter with a lithium battery bank, from single-phase home setups to larger three-phase and expandable systems. Options include Solis, Victron and Voltacon hybrid inverters matched with Pylontech and other lithium battery packs, with some kits certified to G98\/G99 and ENA standards.\u003c\/p\u003e\u003cp\u003eInstallers and homeowners use these kits to add battery storage to a grid-tied solar system without redesigning the whole installation. Battery capacities range from a few kilowatt-hours up to expandable banks for larger sites, so you can size the kit to the household or commercial load it needs to cover.\u003c\/p\u003e","products":[{"product_id":"energy-cube-hybrid-lithium-storage","title":"Voltacon Energy Cube 30kW Hybrid Inverter | 30kWh Lithium Battery","description":"\u003cp\u003eThe Voltacon Energy Cube pairs the InfiniSolar WP 30kW hybrid inverter with the EC605 high-voltage lithium battery bank, giving a default configuration of 30kW output and 30kWh of storage. Up to four inverters can be paralleled for 120kW combined output, and additional EC605 modules can be stacked to expand storage to 120kWh. It carries G99 approval for UK grid connection and an IP65 weatherproof enclosure, making it suited to commercial, industrial and large residential installations that need dependable backup power.\u003c\/p\u003e\u003ch2\u003eKey features of the commercial battery storage system\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter power\u003c\/strong\u003e, 30kW, expandable to 120kW with four units in parallel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery capacity\u003c\/strong\u003e, 30kWh integrated lithium bank (EC605), expandable to 120kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid approval\u003c\/strong\u003e, G99 approved for UK grid connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure rating\u003c\/strong\u003e, IP65 weatherproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC charging\u003c\/strong\u003e, 30kW super AC charger, fully recharges the 30kWh battery in approximately one hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCell chemistry\u003c\/strong\u003e, Lithium Iron Phosphate (LFP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring and control\u003c\/strong\u003e, built-in Wi-Fi, RS485 BMS communication port, programmable supply priority (PV, battery or grid)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOperating modes and load handling\u003c\/h2\u003e\u003cp\u003eThe system supports grid-tie, off-grid, and grid-tie with backup modes, plus a built-in timer for scheduled operation. Dual AC output allows smart load management, and it supports 150% unbalanced load. When two or more batteries are ordered, the HVC05 parallel control module is included, carrying the copper busbars that distribute current evenly across the stacked battery bank.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial and industrial buildings needing large-scale storage, three phase properties with high peak demand, off-grid or hybrid systems in areas of unreliable grid supply, and large residential or agricultural energy independence projects.\u003c\/p\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eThis is a high-voltage lithium system and must be designed, installed and commissioned by a qualified electrical engineer experienced with large-scale battery storage. G99 notification and DNO approval are required for UK grid connection. Do not attempt installation without the correct engineering qualifications and grid approvals.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060749922592,"sku":"EC605","price":18081.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ec605-1.webp?v=1785502721"},{"product_id":"all-in-one-hybrid-inverter-battery-5kwh","title":"5.5kW All in One Hybrid Inverter \u0026 5kWh Lithium Battery | Voltacon","description":"\u003cp\u003eThe Voltacon 5.5kW home energy storage system packs a hybrid inverter, 5kWh lithium-ion battery bank and AC charger into one compact metallic cabinet. It's G98\/G99 compliant and ENA registered, built for grid-tied UK homes that want self-consumption, backup power or off-peak tariff charging. Solar panels help but aren't required to run the system.\u003c\/p\u003e\u003ch2\u003eKey features of this home battery storage system\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid inverter\u003c\/strong\u003e, 5.5kW with integrated solar charger and AC charger up to 100A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery capacity\u003c\/strong\u003e, 5kWh lithium-ion, expandable up to 50kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e, G98\/G99 compliant and ENA certified for UK grid connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle life\u003c\/strong\u003e, over 8,000 battery cycles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge discharge\u003c\/strong\u003e, up to 3C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure rating\u003c\/strong\u003e, IP20, indoor installation only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eSurplus solar generation charges the battery first, with any excess exported to the grid if configured. Without panels fitted, the system can charge overnight on an off-peak tariff and discharge during peak hours, cutting electricity costs even before any PV is added. Panels can be connected later to boost self-sufficiency further.\u003c\/p\u003e\u003cp\u003eIt runs in grid-tie, off-grid, or grid-tie with backup mode, with supply priority set to PV, battery or grid as needed. A built-in timer handles scheduled charging and discharging, and real-time monitoring software is included alongside USB, RS232, Modbus, SNMP, GPRS and Wi-Fi communication interfaces.\u003c\/p\u003e\u003ch3\u003ePanel compatibility\u003c\/h3\u003e\u003cp\u003eCompatible with monocrystalline and polycrystalline PV modules only. Do not connect other array types, and never earth either terminal of the solar array.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential grid-tied solar self-consumption\u003c\/li\u003e\n\u003cli\u003eOff-peak charging with peak-hour discharge\u003c\/li\u003e\n\u003cli\u003eHome backup power during grid outages\u003c\/li\u003e\n\u003cli\u003eProperties with or without existing solar PV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eFitting must be carried out by a qualified electrician or MCS-accredited solar installer, with G98 or G99 notification and DNO approval secured before grid connection. AC wiring, battery connections, DC fusing and earthing must follow IET Wiring Regulations. IP20 rated for indoor use only, so this is not a DIY job.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060753920288,"sku":"ESS5500-5KWH","price":2480.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ess5500-5kwh-1.webp?v=1785503694"},{"product_id":"solis-8kw-hybrid-battery-storage-kit","title":"Solis 8kW Hybrid Solar Kit 10.24kWh US5000 | 10 JA Solar Panels","description":"\u003cp\u003eThis \u003cstrong\u003eSolis 8kW hybrid solar kit\u003c\/strong\u003e pairs the Solis S6-EH1P8K-L-Plus inverter with 10.24kWh of Pylontech US5000C battery storage and a 4.5kW PV array from 10 JA Solar panels. Built for UK homes and small commercial sites, it runs alongside the grid, boosts self-consumption, charges on off-peak tariffs and keeps essential circuits running during a power cut. All the core parts for a full installation are in the box.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Solis S6-EH1P8K-L-Plus 8kW single phase hybrid inverter with Wi-Fi monitoring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 10.24kWh total from 2 x Pylontech US5000C 5.12kWh LiFePO4 batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar array\u003c\/strong\u003e, 4.65kW from 10 x JA Solar 465W bifacial N-Type panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExport control\u003c\/strong\u003e, full export, controlled 0W to 8kW, or zero-export mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, Mersen battery fuses, DC disconnector and AC combiner box with surge protection and energy meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e, ground or flat roof kit for 10 panels, plus 25 metres of 6mm² solar DC cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOperating modes\u003c\/h2\u003e\n\u003cp\u003eThe system works as a hybrid grid-parallel setup with intelligent energy routing. It can store cheaper overnight energy on off-peak tariffs for daytime use, and switch to emergency backup to supply household circuits if the grid goes down. Export is adjustable, from a controlled level up to the inverter's full output, or restricted entirely with zero-export mode.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eSuited to UK homes wanting to cut electricity bills and reduce grid dependence, and to properties on time-of-use tariffs such as Octopus Agile or Economy 7. It also fits sites that need backup power for essential loads, small commercial premises with a single phase supply, and phased solar projects where battery or PV capacity will be added later.\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eFitting must be carried out by a qualified MCS-accredited electrician, with grid connection meeting G98 compliance in the UK. Export setup, CT clamp positioning, inverter commissioning and battery protocol settings all need to be completed and checked on site. Contact us for pre-sales system design support.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Solis 8kW Hybrid Inverter S6-EH1P8K-L-Plus with Wi-Fi\u003c\/li\u003e\n\u003cli\u003e2 x Pylontech US5000C 5.12kWh 48V LiFePO4 battery (10.24kWh total)\u003c\/li\u003e\n\u003cli\u003e10 x JA Solar 465W bifacial N-Type panels (JAM54D41-465-LB)\u003c\/li\u003e\n\u003cli\u003e1 x Mersen battery fuses and DC disconnector with 2 x 200A fuses\u003c\/li\u003e\n\u003cli\u003e1 x AC combiner box with surge protection and energy meter\u003c\/li\u003e\n\u003cli\u003e1 x ground or flat roof mounting kit for 10 panels (30mm frame)\u003c\/li\u003e\n\u003cli\u003e1 set of 25 metres 6mm² solar DC cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060756443424,"sku":"002946","price":5239.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-002946-1.webp?v=1785504122"},{"product_id":"h3x-hybrid-solar-inverter-battery","title":"Pylontech Force H3X 6kW Hybrid Solar Inverter with LiFePO4 Battery","description":"\u003cp\u003eThe Pylontech Force H3X is a 6kW hybrid solar inverter built into a single stack with vertically mounted LiFePO4 battery modules. Storage starts at 5.12kWh per module and expands to 35kWh in one stack, with a maximum system capacity of 210kWh across multiple groups. Because the inverter sits directly on top of the battery tower, a full 35kWh system takes up less than 2 square metres of floor space.\u003c\/p\u003e\u003ch2\u003eKey features of the pylontech force h3x hybrid system\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 6kW hybrid inverter with grid-parallel and off-grid operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery chemistry\u003c\/strong\u003e, LiFePO4 modules, expandable from 5.12kWh to 35kWh per stack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum capacity\u003c\/strong\u003e, up to 210kWh across multiple stacked groups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint\u003c\/strong\u003e, inverter mounted on the battery stack, under 2m² for a full 35kWh system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e, suitable for indoor and outdoor mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, G98\/G99 (UK) and compliant with European installation standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEnergy management\u003c\/h2\u003e\u003cp\u003ePylontech's Dynamic Control EMS tracks energy flow in real time and adjusts charging and discharging to increase self-consumption and cut grid import. The system runs in parallel with the grid under normal conditions and switches to off-grid operation automatically if the grid goes down. A free mobile app is included for remote monitoring and control.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential installations where floor space is limited, small commercial energy storage projects, and grid-connected systems used for self-consumption and backup power. The stackable design also suits sites where storage needs may grow over time.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eGrid connection must meet G98 or G99 requirements depending on system size. The battery stack needs a level, solid floor able to support the full loaded weight, and all wiring should be carried out by a qualified installer following the Pylontech Force H3X installation guide. The battery module reference is FH10050.\u003c\/p\u003e","brand":"Pylontech","offers":[{"title":"5kWh","offer_id":52060759130400,"sku":"FH3X5-5K","price":2056.95,"currency_code":"GBP","in_stock":true},{"title":"10kWh","offer_id":52060759163168,"sku":"FH3X5-10K","price":3249.75,"currency_code":"GBP","in_stock":true},{"title":"15kWh","offer_id":52060759195936,"sku":"FH3X5-15K","price":4226.25,"currency_code":"GBP","in_stock":true},{"title":"20kWh","offer_id":52060759228704,"sku":"FH3X5-20K","price":5202.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-fh3x5-5k-1.webp?v=1785504343"},{"product_id":"fh3x-hybrid-solar-inverter-battery","title":"Pylontech Force FH3X 3.6kW Hybrid Solar Inverter | 5.12kWh Battery","description":"\u003cp\u003eThe \u003cstrong\u003ePylontech Force FH3X\u003c\/strong\u003e pairs a 3.6kW hybrid inverter with a stackable LiFePO4 battery module in one integrated unit. Storage starts at 5.12kWh and can be expanded to 15kWh by adding further modules underneath the inverter, which sits directly on top of the battery to keep the footprint compact. The system is certified to G98\/G99 for UK grid connection and can be installed indoors or outdoors.\u003c\/p\u003e\u003ch2\u003eKey features of this hybrid solar inverter with battery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter output\u003c\/strong\u003e, 3.6kW hybrid inverter with grid-parallel and off-grid operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery capacity\u003c\/strong\u003e, LiFePO4 module, expandable from 5.12kWh to 15kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint\u003c\/strong\u003e, inverter mounts on top of the battery module in a single stack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e, suitable for indoor and outdoor siting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy management\u003c\/strong\u003e, Pylontech Dynamic Control EMS with a free mobile app for remote monitoring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e, certified to G98\/G99 (UK) and EU standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eDuring normal operation the FH3X runs in parallel with the grid, drawing on solar and stored battery power to cover household demand and cut grid import. If the grid goes down it switches automatically to off-grid mode to keep connected loads running. The Dynamic Control EMS handles charging and discharging in real time to make the most of self-consumption.\u003c\/p\u003e\u003cp\u003eBecause the battery and inverter form one stack, cabling stays short and the install stays tidy. A second battery module takes storage to 10.24kWh, and a third to 15kWh, with no change needed to the inverter or wiring.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential solar energy storage\u003c\/li\u003e\n\u003cli\u003eGrid-connected self-consumption with backup power\u003c\/li\u003e\n\u003cli\u003eProperties where installation space is limited\u003c\/li\u003e\n\u003cli\u003eStarter systems with a planned future battery expansion\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eGrid connection must meet G98 or G99 requirements (UK) depending on system size. The battery stack needs a level, solid floor, and all electrical work should be carried out by a qualified installer following the Pylontech Force FH3X installation guide.\u003c\/p\u003e","brand":"Pylontech","offers":[{"title":"5kWh","offer_id":52060759687456,"sku":"FH3X3.6-5K","price":2310.0,"currency_code":"GBP","in_stock":true},{"title":"10kwh","offer_id":52060759720224,"sku":"FH3X3.6-10K","price":3360.0,"currency_code":"GBP","in_stock":true},{"title":"15kwh","offer_id":52060759752992,"sku":"FH3X3.6-15K","price":4410.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-fh3x3-6-5k-1.webp?v=1785504475"},{"product_id":"home-battery-storage-10kwh-hybrid","title":"5.5kW All in One Home Battery Storage 10kWh Lithium | Voltacon","description":"\u003cp\u003eThe Voltacon 5.5kW home energy storage system packs a hybrid inverter, 10kWh lithium battery bank and AC charger into one metallic cabinet. ENA certified and G99 compliant, it suits grid-tied residential installations and covers self-consumption, backup power and off-peak tariff charging. The battery bank is expandable up to 50kWh. Solar panels help but are not required to run the system.\u003c\/p\u003e\u003ch2\u003eKey features of this home battery storage kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid inverter\u003c\/strong\u003e, 5.5kW with integrated solar and AC charger up to 100A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery capacity\u003c\/strong\u003e, 10kWh lithium ion, expandable to 50kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e, ENA certified and G99 compliant for UK grid connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating modes\u003c\/strong\u003e, grid tie, off grid, and grid tie with backup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge\u003c\/strong\u003e, surge current up to 3C, over 8,000 battery cycles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP20 rated, indoor installation only, cabinet 160 x 62 x 20cm for inverter and two battery towers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe system stores energy from solar panels or the mains grid and feeds it to the consumer unit, cutting reliance on grid electricity during peak tariff periods. When solar is generating, the system prioritises self-consumption and charges the battery with any surplus. Without solar, the battery can charge overnight on an off-peak tariff and discharge during the day instead.\u003c\/p\u003e\u003cp\u003eThe 10kWh bank holds double the storage of the 5kWh version, so it suits larger households or properties with heavier overnight demand better. Capacity expands in modules up to 50kWh maximum.\u003c\/p\u003e\u003ch3\u003ePV compatibility\u003c\/h3\u003e\u003cp\u003eWorks with monocrystalline and polycrystalline PV modules only. Do not connect other PV array types, and do not earth the positive or negative terminal of the solar array.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResidential grid-tied solar self-consumption systems\u003c\/li\u003e\n\u003cli\u003eOff-peak tariff charging with peak-hour discharge\u003c\/li\u003e\n\u003cli\u003eHome backup power during grid outages\u003c\/li\u003e\n\u003cli\u003eProperties with or without existing solar PV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician or MCS-accredited solar installer. G99 notification and DNO approval are required before grid connection. AC wiring, battery connections, DC fusing and earthing must comply with IET Wiring Regulations. IP20 rated for indoor use only; this is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060759785760,"sku":"ESS510-10KWH-BP","price":3704.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ess510-10kwh-bp-1.webp?v=1785504497"},{"product_id":"victron-multiplus-ii-5kva-battery-kit","title":"Victron Multiplus-II GX 5kVA Battery Storage Kit | 2x Pylontech US5000","description":"\u003cp\u003eThis kit pairs the Victron Multiplus-II GX 5kVA inverter-charger with two Pylontech US5000 48V lithium batteries, giving a complete AC-coupled storage system. It charges from the mains grid so stored energy can be used during peak tariff periods. Solar panels aren't required, though they can be added later.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter-charger\u003c\/strong\u003e, Victron Multiplus-II GX 5kVA with integrated GX controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries\u003c\/strong\u003e, 2x Pylontech US5000 48V 4.8kWh lithium batteries, 9.6kWh usable total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid monitoring\u003c\/strong\u003e, CT current transformer 100A with 5m cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery communication\u003c\/strong\u003e, VE.Can to CAN-Bus BMS Type A cable, 1.8m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting and protection\u003c\/strong\u003e, 2x US5000 wall brackets, interconnect cables, 2x 160A fuses and a DC disconnector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommissioning\u003c\/strong\u003e, MK3-USB interface for setup via VictronConnect\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eThe Multiplus-II GX charges the Pylontech battery bank from the mains, typically on a cheap overnight tariff, then discharges that stored energy during the day or at peak rates. This cuts electricity costs without needing solar panels. The system can also run alongside existing solar PV and feed-in tariff arrangements, since it connects in parallel and doesn't affect existing FIT earnings. The included CT sensor enables PowerControl and PowerAssist, so the system won't draw more current than the supply allows.\u003c\/p\u003e\u003cp\u003eEach Pylontech US5000 provides 4800Wh nominal energy at 48V, with a 95% depth of discharge and a 15 year design life. The Multiplus-II GX and batteries communicate over the included VE.Can to CAN-Bus BMS cable.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHome energy storage without solar panels\u003c\/li\u003e\n\u003cli\u003eOff-peak charging with peak-hour discharge\u003c\/li\u003e\n\u003cli\u003eProperties with existing solar PV and feed-in tariff contracts\u003c\/li\u003e\n\u003cli\u003eBackup power during grid outages\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x Victron Multiplus-II 48\/5000\/70-50 230V GX (PMP482506000)\u003c\/li\u003e\n\u003cli\u003e2x Pylontech US5000 48V lithium battery\u003c\/li\u003e\n\u003cli\u003e1x CT current transformer 100A \/ 50mA, 5m cable\u003c\/li\u003e\n\u003cli\u003e1x VE.Can to CAN-Bus BMS Type A cable 1.8m\u003c\/li\u003e\n\u003cli\u003e2x US5000 wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e1x Pylontech battery interconnect cables\u003c\/li\u003e\n\u003cli\u003e2x 160A fuses and 1x DC disconnector\u003c\/li\u003e\n\u003cli\u003e1x MK3-USB interface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation notes\u003c\/h2\u003e\u003cp\u003eInstallation must be carried out by a qualified electrician experienced with battery storage and Victron equipment. AC connection, DC wiring, battery cabling, fusing and earthing must follow IET Wiring Regulations and Victron's installation guidelines. Commissioning needs VictronConnect and the MK3-USB interface. This is not a DIY installation.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060760113440,"sku":"VMP-kit-us5000","price":3045.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-vmp-kit-us5000-1.webp?v=1785504548"},{"product_id":"commercial-battery-storage-10kw-3-phase","title":"Solis 10kW 3 Phase Hybrid Solar Kit | Pylontech Force H2 14kWh","description":"\u003cp\u003eThis three phase solar hybrid kit pairs the Solis 10kW RHI-3P10K-HVES-5G inverter with a Pylontech Force H2 high-voltage battery tower, giving 14.21kWh of usable storage. It suits large residential properties, warehouses and commercial premises, and arrives with the monitoring, metering and communication parts needed for a full installation.\u003c\/p\u003e\u003ch2\u003e10kw 3 phase hybrid solar inverter with high-voltage storage\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Solis RHI-3P10K-HVES-5G three phase hybrid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, Pylontech Force H2 tower, 4 modules at 96V each, 14.21kWh total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem voltage\u003c\/strong\u003e, 384V for lower operating current and thinner cabling than a 48V setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle life\u003c\/strong\u003e, over 8,000 cycles, 15-year design life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e, IP55 battery housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion\u003c\/strong\u003e, up to 6 battery groups in parallel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEastron SDM630 CT Modbus three phase energy meter\u003c\/li\u003e\n\u003cli\u003e3x CT current transformers 100\/5A\u003c\/li\u003e\n\u003cli\u003eWi-Fi monitoring dongle for SolisCloud\u003c\/li\u003e\n\u003cli\u003eBMS and data communication cables\u003c\/li\u003e\n\u003cli\u003e10m energy meter Ethernet cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Force H2 tower is built from four FH9637M modules stacked vertically, measuring 450 x 296 x 1414mm and weighing 152kg in total. Running at 384VDC rather than 48V brings lower operating current, thinner cabling, fanless cooling and longer cycle life.\u003c\/p\u003e\u003cp\u003eThe kit covers two setups. It can add storage to an existing grid-tied PV array without touching feed-in tariff payments, or the inverter can connect directly to a solar array and handle generation, storage and load supply on its own. The Solis inverter supports zero export, so the system can be set to use all generated and stored energy on-site, or export anywhere from 0W up to 10,000W.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eLarge residential properties with a three phase supply, commercial buildings and warehouses, and sites adding battery storage to an existing three phase grid-tied PV system with zero or managed export.\u003c\/p\u003e\u003ch2\u003eInstallation and safety notes\u003c\/h2\u003e\u003cp\u003eFit only by a qualified electrical engineer or MCS-accredited installer experienced with three phase systems and high-voltage battery storage. G99 notification and DNO approval are required, and high-voltage connections must be made by trained personnel only. Wiring must follow IET Wiring Regulations and the manufacturers' installation manuals.\u003c\/p\u003e","brand":"Solis","offers":[{"title":"Default Title","offer_id":52060760572192,"sku":"ESS10KW14K","price":7706.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-ess10kw14k-1.webp?v=1785504759"},{"product_id":"solis-6kw-hybrid-battery-storage-kit","title":"Solis 6kW Hybrid ESS Kit 10kWh Pylontech US5000 Battery","description":"\u003cp\u003eThis battery energy storage kit combines the Solis 6kW hybrid inverter with two Pylontech US5000 48V lithium batteries, giving 10kWh of usable storage for home use. The system charges from the mains grid on an off-peak tariff and can take up to 6kW of solar PV input if panels are added later. Mounting brackets, cables, fusing and BMS communication are all included.\u003c\/p\u003e\u003ch2\u003eKey features of the solis 6kw hybrid inverter kit\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Solis 6kW hybrid inverter, model RHI-(3-6)K-48ES-5G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries\u003c\/strong\u003e, 2x Pylontech US5000 48V 5.12kWh lithium, 10kWh total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, Wi-Fi module included for SolisCloud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar input\u003c\/strong\u003e, optional PV input up to 6,000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging\u003c\/strong\u003e, AC charging from mains grid or off-peak tariff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid transfer\u003c\/strong\u003e, less than 20ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModes\u003c\/strong\u003e, self-consumption, time-of-use and off-grid backup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct overview\u003c\/h2\u003e\u003cp\u003eThe Solis RHI-48ES works as a grid-tied energy storage system. It charges the battery from mains electricity during cheap off-peak periods and discharges it at peak times to cut electricity costs. Solar panels can be added at any point to reduce grid dependence further.\u003c\/p\u003e\u003cp\u003eThe Pylontech US5000 batteries run at 48VDC with a 95% depth of discharge and a design life of 15 years. A BMS communication cable links the batteries to the inverter directly, so charge and discharge management runs automatically without manual setup of each battery.\u003c\/p\u003e\u003cp\u003eA CT current transformer for zero-export control is not part of this kit and needs ordering separately if required.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x Solis 6kW hybrid inverter RHI-(3-6)K-48ES-5G\u003c\/li\u003e\n\u003cli\u003e1x Wi-Fi monitoring module\u003c\/li\u003e\n\u003cli\u003e2x Pylontech US5000 48V 5.12kWh lithium batteries\u003c\/li\u003e\n\u003cli\u003e2x Pylontech US5000 wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e1x Set of long and short battery power cables\u003c\/li\u003e\n\u003cli\u003e1x 100A fuse disconnector\u003c\/li\u003e\n\u003cli\u003e1x BMS communication cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to residential battery storage with or without solar PV, off-peak charging with peak-hour discharge, home backup during outages, and adding storage to an existing grid-tied solar setup.\u003c\/p\u003e\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\u003cp\u003eThis kit must be installed by a qualified electrician or MCS-accredited solar installer. G98 or G99 notification and DNO approval are required before grid connection. Battery wiring, DC fusing, earthing and BMS configuration must follow IET Wiring Regulations along with the Solis and Pylontech installation manuals. DIY installation is not permitted.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060761719072,"sku":"S5KW-US5000","price":3693.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s5kw-us5000-1.webp?v=1785504907"},{"product_id":"hybrid-solar-kit-battery-storage-6kw","title":"6kW Hybrid Solar Kit 10kWh Battery Storage | JA Solar Panels","description":"\u003cp\u003eThis 6kW hybrid solar power kit brings together a hybrid inverter, Pylontech lithium-ion battery storage and JA Solar panels in one plug-and-play package for homes wanting to cut electricity costs and rely less on the grid. It is built around domestic photovoltaic self-consumption, storing surplus solar energy for use later in the day.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid inverter\u003c\/strong\u003e, 6kW new generation unit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery storage\u003c\/strong\u003e, 2x US5000 Pylontech lithium-ion batteries, 5.12kWh each, 10kWh total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panels\u003c\/strong\u003e, 8x JA Solar 450W panels, 3.6kW total PV power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproofing\u003c\/strong\u003e, IP65 rated, batteries and inverter can be installed outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e, free internet app to track panel performance and appliance consumption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable\u003c\/strong\u003e, more batteries or panels can be added later\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it works\u003c\/h2\u003e\u003cp\u003eYour home draws on solar power first, with any excess stored in the batteries. When demand exceeds what solar and batteries can supply, the grid tops up the difference automatically. The inverter's AC charger and integrated timer also allow overnight charging from off-peak electricity, so stored energy is available during higher tariff periods. The system supports off-grid operation and can act as backup power for essential loads during an outage.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to homes reducing grid dependence, self-consumption focused installations, and properties wanting battery storage and backup power from day one.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x 6kW hybrid solar inverter\u003c\/li\u003e\n\u003cli\u003e2x US5000 Pylontech lithium-ion batteries, 5.12kWh each\u003c\/li\u003e\n\u003cli\u003e8x JA Solar 450W solar panels\u003c\/li\u003e\n\u003cli\u003eAdjustable tile roof mounting kit for 8 panels\u003c\/li\u003e\n\u003cli\u003e1x 25m red 6mm solar PV cable\u003c\/li\u003e\n\u003cli\u003e1x 25m black 6mm solar PV cable\u003c\/li\u003e\n\u003cli\u003eAC protection consumer unit and energy meter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52060767093024,"sku":"SK6000W10KWH","price":4095.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-sk6000w10kwh-1.webp?v=1785505661"},{"product_id":"hybrid-solar-kit-5-12kwh-battery","title":"Solis 3.6kW Hybrid Solar Kit 5.12kWh Battery 6 JA Solar Panels IP65","description":"\u003cp\u003eThis hybrid solar kit pairs a 3.6kW Solis single phase inverter with a 5.12kWh US5000 LiFePO4 battery and six JA Solar 450W N-Type bifacial panels, giving a 2.7kW PV array for UK homes and small commercial sites. Both the inverter and battery are IP65 rated, so the system can be fitted indoors or outdoors without needing extra shelter.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter\u003c\/strong\u003e, Solis 3.6kW hybrid, single phase, WiFi ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery\u003c\/strong\u003e, 5.12kWh US5000 Pylontech 48V LiFePO4 lithium storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar array\u003c\/strong\u003e, 6 x JA Solar 450W bifacial black N-Type panels (JAM54D41-450-LB), 2.7kW total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather protection\u003c\/strong\u003e, inverter and battery both IP65 rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid modes\u003c\/strong\u003e, import, export, controlled export and zero export\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtras\u003c\/strong\u003e, off peak battery charging support and backup ready operation for essential loads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x Solis 3.6kW hybrid solar inverter, single phase, WiFi ready\u003c\/li\u003e\n\u003cli\u003e1 x US5000 Pylontech 5.12kWh 48V lithium battery (LiFePO4)\u003c\/li\u003e\n\u003cli\u003e1 x Mersen battery fuse and DC disconnector set\u003c\/li\u003e\n\u003cli\u003e6 x JA Solar 450W bifacial black N-Type panels (JAM54D41-450-LB)\u003c\/li\u003e\n\u003cli\u003e1 x roof mounting kit for 6 panels\u003c\/li\u003e\n\u003cli\u003e1 x 25m solar PV cable 6mm², pre crimped\u003c\/li\u003e\n\u003cli\u003e1 x AC combiner box 230Vac with surge protection and energy meter\u003c\/li\u003e\n\u003cli\u003e1 x DC solar panel isolator switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eBuilt for self consumption and lower electricity costs, this kit suits homeowners and small businesses that want a hybrid system with monitoring through the Solis WiFi platform. The roof mounting kit supplied is for tile roofs; an alternative kit is available on request at no extra cost.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eProfessional installation by a qualified electrician is recommended. Protection settings, commissioning and verification should follow local regulations and site requirements.\u003c\/p\u003e","brand":"Voltacon","offers":[{"title":"Default Title","offer_id":52061009314080,"sku":"S5-3600W-5KWH","price":3139.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-s5-3600w-5kwh-1.webp?v=1785508374"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/grid-tie-ess-systems.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}