{"title":"Easeic","description":"\u003cp\u003eEaseic make constant current LED drivers for commercial fittings, in DALI and 1-10V dimmable versions.\u003c\/p\u003e\u003cp\u003eThe drivers run from 18W to 54W with a selectable output between 200mA and 1050mA, which is the useful part: one driver covers a range of fittings, so a specifier can hold fewer part numbers and set the current on site to suit the panel or downlight it is feeding. Both control types are available across the range.\u003c\/p\u003e\u003cp\u003eThe range also includes DALI bus management modules, which extend and split a DALI line where a single bus segment runs out of addresses or distance.\u003c\/p\u003e","products":[{"product_id":"1-10v-led-driver-18w-adjustable","title":"Easeic LNA118AL 18W 1-10V Dimmable LED Driver 200-1050mA","description":"\u003cp\u003eThe Easeic LNA118AL is a constant current LED driver with adjustable output, built for compact luminaires, recessed fittings and architectural lighting. Output current is adjustable from 200mA to 1050mA via integrated DIP switches, so installers can set the driver to match the connected LED array.\u003c\/p\u003e\u003ch2\u003eKey features of this 1-10v led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 18W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, 200mA to 1050mA, adjustable by DIP switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum open circuit voltage\u003c\/strong\u003e, under 77V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 0\/1-10V, PWM, resistance and PUSH-Dim, 0 to 100% range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimming and control\u003c\/h2\u003e\u003cp\u003eThree dimming methods are built into one driver: 0\/1-10V, PWM and resistance dimming, alongside PUSH-Dim for switching and dimming from a standard push-button. The analogue dimming curve runs smoothly from 0% to 100% without flicker, which suits offices, hospitality fit-outs, retail spaces and other commercial dimmable lighting.\u003c\/p\u003e\u003ch2\u003eEfficiency and protection\u003c\/h2\u003e\u003cp\u003eEfficiency reaches up to 88%, with a power factor above 0.90 at full load and THD below 10%. The driver includes protection against short circuit, over voltage, over current and open circuit conditions.\u003c\/p\u003e\u003ch2\u003eHousing and installation\u003c\/h2\u003e\u003cp\u003eThe slim housing measures 280 x 30 x 26mm, sized for recessed luminaires, LED panels, battens and other compact fittings where space is tight. Push terminals are fitted to speed up wiring on site. Operating temperature runs from -20°C to +50°C, and the driver carries a UL Damp and Dry environmental rating.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096612303136,"sku":"632118","price":22.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-632118-1.webp?v=1785762074"},{"product_id":"dali-bus-power-controller-module","title":"DALI Bus Management Module 2 Channel 64 Address | Easeic DBC202D","description":"\u003cp\u003eThe Easeic DBC202D is a 2 channel DALI bus management module built to control up to 128 addressable LED drivers across two independent DALI lines of 64 addresses each. It gives installers a compact way to run scene based lighting control without a full building management system, and works as an alternative to systems such as the Lutron Grafik Eye.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels\u003c\/strong\u003e, 2 channel DALI bus management, each channel handling 2 x 64 independent DALI addresses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSI mode\u003c\/strong\u003e, can drive 2 x 25 DSI protocol LED drivers when switched to DSI operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay outputs\u003c\/strong\u003e, 2 channel passive relay output rated 2A per channel, switching the main power to slave equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus power\u003c\/strong\u003e, integrated 2 x 250mA DALI bus power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol\u003c\/strong\u003e, compliant with IEC62386, supporting slave state feedback and single, group or all-slave control on the same bus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScenes\u003c\/strong\u003e, up to 99 predefined lighting scenes across 99 areas with 16 lighting effects, named and edited through the LCD display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to commercial and residential installations where multiple DALI or DSI LED drivers need to be grouped, scened, or switched manually. The manual on\/off override lets an installer or user operate the slave equipment directly at any time, independent of the programmed scenes.\u003c\/p\u003e\u003ch3\u003eStatus and display\u003c\/h3\u003e\u003cp\u003eAn LED status indicator shows operating state in red or green as standard, with other colours available. The LCD dynamic display is used to name and manage each scene or area.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096620527904,"sku":"999015","price":417.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-999015-1.webp?v=1785762768"},{"product_id":"led-driver-1-10v-54w-dimmable","title":"LED 1-10V Dimmable Driver 54W 200-1050mA | Easeic LNA154AL","description":"\u003cp\u003eThe Easeic LNA154AL is a constant current LED driver built for commercial, architectural and OEM lighting projects. It supports 0\/1-10V dimming and delivers up to 54W of output power with an adjustable current range set by onboard DIP switches.\u003c\/p\u003e\u003ch2\u003e1-10V LED driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 54W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, adjustable 200mA to 1050mA via DIP switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC, maximum open circuit voltage under 77V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 0\/1-10V, PWM, resistance dimming and PUSH-Dim, with a 0 to 100% dimming range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 88%, power factor above 0.95, THD below 10%.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eControl and compatibility\u003c\/h2\u003e\u003cp\u003eThe 3-in-1 dimming interface covers 0\/1-10V, PWM and resistance dimming from a single unit, so it works with the majority of existing lighting control systems. PUSH-Dim lets an installer switch and dim from a standard push button without a separate control signal, useful where a dimming line has not been run.\u003c\/p\u003e\u003ch2\u003eBuild and protection\u003c\/h2\u003e\u003cp\u003eHoused in a slim linear case measuring 280 x 30 x 26mm, the driver is sized to fit inside LED panels, recessed luminaires, linear battens and other narrow fittings where a bulky driver will not sit. It carries UL protection class certification and includes protection against short circuit, over voltage and over current conditions. Operating temperature is rated from -20°C to +50°C.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to OEM luminaire manufacturers and installers working on offices, hospitality fit-outs, retail lighting and other professional installations where adjustable constant current output and multiple dimming protocols are needed from one driver.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096635240736,"sku":"632154","price":36.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-632154-1.webp?v=1785763379"},{"product_id":"dali-dimmable-led-driver-36w","title":"LED DALI Dimmable Driver 36W 200-1050mA | Easeic LND136","description":"\u003cp\u003eThe Easeic LND136 is a constant current DALI dimmable driver built for LED arrays, panels and architectural luminaires that need flexible output current and smooth dimming control. Output power reaches up to 36W, with output current adjustable from 200mA to 1050mA via built-in DIP switches, so installers can match the driver to the LED load on site.\u003c\/p\u003e\u003ch2\u003eKey features of this dali dimmable led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, adjustable 200mA to 1050mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming protocols\u003c\/strong\u003e, DALI 2 with DALI feedback, 1-10V, PWM and PUSH-Dim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 0% to 100%, with LED start possible from 0.1% brightness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100V to 277V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e, compact low-profile design, 167 x 39 x 30mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimming performance\u003c\/h2\u003e\u003cp\u003eThe LND136 uses analogue flicker-free dimming for smooth adjustment across its full range. Because it supports DALI 2 with feedback alongside 1-10V, PWM and PUSH-Dim, it fits into professional smart lighting control systems as well as simpler analogue setups. This makes it suited to offices, hospitality, retail and architectural lighting where visual comfort matters.\u003c\/p\u003e\u003ch2\u003eEfficiency and protection\u003c\/h2\u003e\u003cp\u003eEfficiency runs up to 88%, with a power factor greater than 0.95 and THD below 10%. The driver includes protection against short circuit, over current, over voltage and open circuit conditions for safe long-term operation.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eA terminal cover and cable retainer are included for installation safety. The compact housing allows fitting inside slim luminaires and confined fixtures, suiting both new builds and retrofit LED lighting projects.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096640778528,"sku":"613136","price":28.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-613136-1.webp?v=1785763823"},{"product_id":"dimmable-led-driver-1-10v-27w","title":"LED 1-10V Dimmable Driver 27W 200-1050mA | Easeic LNA127AL","description":"\u003cp\u003eThe Easeic LNA127AL is a constant current LED driver built for OEM lighting manufacturers and commercial luminaires. It supports 0\/1-10V dimming, PWM dimming, resistance dimming and PUSH-Dim switching, with an adjustable output current from 200mA to 1050mA set by integrated DIP switches.\u003c\/p\u003e\u003ch2\u003eKey features of this 1-10v led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 27W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, 200mA to 1050mA, adjustable via DIP switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 0\/1-10V, PWM, resistance and PUSH-Dim, 0 to 100% range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 88%, power factor greater than 0.95, THD below 10%\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and protection\u003c\/h2\u003e\u003cp\u003eThe housing measures 280 x 30 x 26mm, a slim linear shape intended for recessed luminaires, LED panels, battens and architectural fittings where space is limited. Push terminals speed up wiring on site. Built-in protection covers short circuit, over voltage, over current and open circuit conditions, and the unit is rated UL Damp and Dry with an operating temperature range of -20°C to +50°C.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to offices, retail fit-outs, hospitality projects and any installation needing smooth, flicker-free dimming from a compact driver. The multi-level current settings mean one driver can be configured for several different LED array requirements, useful for manufacturers standardising on a single part across a product range.\u003c\/p\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x Easeic LNA127AL LED 1-10V dimmable driver\u003c\/li\u003e\u003c\/ul\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096643367200,"sku":"632127","price":25.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-632127-1.webp?v=1785764145"},{"product_id":"dali-dimmable-led-driver-27w","title":"LED DALI Dimmable Driver 27W 200-1050mA | Easeic LND127AL","description":"\u003cp\u003eThe Easeic LND127AL is a constant current LED DALI dimmable driver built for luminaires that need smooth dimming and a compact fit. It delivers up to 27W and offers an adjustable output current from 200mA to 1050mA, selected on site through the built-in DIP switch.\u003c\/p\u003e\u003ch2\u003eKey features of this DALI dimmable LED driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 27W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable current\u003c\/strong\u003e, 200mA to 1050mA via DIP switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC, max open circuit voltage under 75V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming protocols\u003c\/strong\u003e, DALI 2 with DALI feedback, 1-10V, PWM and PUSH-Dim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 0% to 100%, with LED start possible from 0.1% brightness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDimming and control\u003c\/h2\u003e\u003cp\u003eAlongside DALI 2 support, the driver responds to 1-10V, PWM and PUSH-Dim signals, so it fits into most existing control set-ups without a protocol change. The analogue flicker-free dimming keeps the light stable right down to 0.1% output, which suits offices, retail units, hospitality fit-outs and architectural lighting where a visible flicker or step in the dimming curve would stand out.\u003c\/p\u003e\u003ch2\u003eEfficiency and protection\u003c\/h2\u003e\u003cp\u003eEfficiency reaches up to 88%, power factor stays above 0.95 and total harmonic distortion is kept below 10%. Built-in protection covers short circuit, over current, over voltage and open circuit conditions, giving the driver a level of resilience suited to long-term installation inside a luminaire rather than an exposed enclosure.\u003c\/p\u003e\u003ch2\u003eCompact, slim housing\u003c\/h2\u003e\u003cp\u003eAt 280 x 30 x 26mm the LND127AL is slim enough for compact and architectural fittings. Push-in terminals cut down wiring time on installation, and the universal 100-277V AC input means the same driver can go into international projects as well as UK retrofits.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096653852960,"sku":"633127","price":30.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-633127-1.webp?v=1785765118"},{"product_id":"dali-dimmable-led-driver-54w","title":"LED DALI Dimmable Driver 54W 200-1050mA | Easeic LND154AL","description":"\u003cp\u003eThe Easeic LND154AL is a constant current LED DALI dimmable driver built for installers who need flexible current settings on one unit. Output current is adjustable between 200mA and 1050mA using onboard DIP switches, so a single driver covers a range of LED modules without swapping parts. Maximum output power is 54W.\u003c\/p\u003e\u003ch2\u003eDali dimmable led driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming control\u003c\/strong\u003e, DALI 2 with DALI feedback, plus 1-10V, PWM and PUSH-Dim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 0 to 100%, with LED start possible from 0.1% brightness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC, maximum open circuit voltage under 75V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 88%, power factor greater than 0.95, THD under 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit, over current, over voltage and open circuit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe DALI 2 protocol and analogue dimming options make this driver suitable for offices, retail fit-outs, hospitality lighting and architectural fittings where smooth, flicker-free control matters. The 1-10V and PWM inputs give installers a fallback where a full DALI network is not in place.\u003c\/p\u003e\u003ch3\u003eHousing and installation\u003c\/h3\u003e\u003cp\u003eAn ultra slim housing measuring 280 x 30 x 26mm allows the driver to sit inside compact luminaires. Push-in terminals remove the need for a screwdriver during wiring, cutting installation time on both new builds and retrofit projects.\u003c\/p\u003e\u003ch2\u003eReliability\u003c\/h2\u003e\u003cp\u003eOperating temperature is rated from -20°C to +50°C, and the driver carries a 5 year warranty. Built-in protection against short circuit, over current, over voltage and open circuit conditions supports long-term use in commercial installations.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096674529568,"sku":"633154","price":36.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-633154-1.webp?v=1785766758"},{"product_id":"1-10v-led-driver-36w-adjustable","title":"LED 1-10V Dimmable Driver 36W Adjustable | Easeic LNA136AL","description":"\u003cp\u003eThe EASEIC LNA136AL is a constant current LED driver built for architectural, commercial and OEM luminaires that need 1-10V dimming. Output current is adjustable from 200mA to 1050mA using onboard DIP switches, and the driver delivers up to 36W into a 3V to 66V DC load.\u003c\/p\u003e\u003ch2\u003e1-10v led driver features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, 200mA to 1050mA, set via DIP switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC, up to 36W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput supply\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 0\/1-10V, PWM, resistance or PUSH-Dim, 0 to 100% range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 88%, power factor greater than 0.95, THD below 10%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit, over voltage, over current and open circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe slim 280 x 30 x 26mm housing and push terminals suit recessed luminaires, LED panels, battens and other compact fittings where space is tight. The universal AC input covers residential, commercial and industrial installations, and the multi-protocol dimming makes it a drop-in choice for lighting control systems already running 0\/1-10V or PWM signals.\u003c\/p\u003e\u003ch2\u003eOperating conditions\u003c\/h2\u003e\u003cp\u003eRated for use from -20°C to +50°C with a UL Damp and Dry environmental rating, and a maximum open circuit voltage below 77V.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096683737376,"sku":"632136","price":26.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-632136-1.webp?v=1785767180"},{"product_id":"dali-dimmable-led-driver-18w-adjustable","title":"Easeic LND118 18W DALI Dimmable LED Driver 200-1050mA","description":"\u003cp\u003eThe Easeic LND118 is a constant current DALI dimmable LED driver rated at 18W, built for compact luminaires and lighting systems that need flexible control. Its adjustable output current, set between 200mA and 1050mA via integrated DIP switches, lets installers match the driver to the LED load on site.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 18W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable current\u003c\/strong\u003e, 200mA to 1050mA using DIP switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming control\u003c\/strong\u003e, DALI 2 with DALI feedback, 1-10V, PWM and PUSH-Dim, complying with IEC62386\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 0% to 100%, with LED start possible from 0.1% brightness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100V to 277V AC, for international and retrofit projects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEfficient and protected operation\u003c\/h2\u003e\u003cp\u003eEfficiency reaches up to 88%, with a power factor above 0.90 and THD below 10% at full load. The driver includes protection against short circuit, over current, over voltage and open circuit conditions, supporting reliable long-term use.\u003c\/p\u003e\u003ch3\u003eHousing and installation\u003c\/h3\u003e\u003cp\u003eThe low-profile housing measures 167 x 39 x 30mm, small enough to fit inside slim luminaires and confined fixtures. A terminal cover and cable retainer are included to help with safe installation.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to LED downlights, battens, panels and T5\/T8 fittings, this dali dimmable led driver works well in offices, hospitality venues, retail spaces and architectural lighting schemes where smooth, flicker-free dimming is needed.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096694354208,"sku":"613118","price":25.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-613118-1.webp?v=1785767493"},{"product_id":"dali-dimmable-led-driver-54w-adjustable","title":"EASEIC LND154BL DALI Dimmable LED Driver 54W 1050-1750mA","description":"\u003cp\u003eThe EASEIC LND154BL is a constant current LED driver with DALI 2 dimming for commercial and architectural lighting. Output current is adjustable from 1050mA to 1750mA via built-in DIP switches, and the driver delivers up to 54W to suit a range of LED loads.\u003c\/p\u003e\u003ch2\u003eKey features of this dali dimmable led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 54W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, adjustable 1050mA to 1750mA via DIP switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 48V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming control\u003c\/strong\u003e, DALI 2 with DALI feedback, 1-10V, PWM and PUSH-Dim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, 0% to 100%, with LED start possible from 0.1% brightness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100V to 277V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 88%, power factor greater than 0.95, THD below 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e, short circuit, over current, over voltage and open circuit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe adjustable current setting means one driver covers several LED array requirements, which suits installers stocking fittings for commercial luminaires. The wide AC input range makes it usable across different mains voltage regions.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eThe housing is slim, at 280 x 30 x 26mm, so it fits inside compact fittings and retrofit luminaires. Push-in terminals remove the need for a screwdriver during wiring, which speeds up both installation and any later maintenance.\u003c\/p\u003e\u003ch2\u003eDimming functions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDALI 2 dimming with DALI feedback\u003c\/li\u003e\n\u003cli\u003e1-10V dimming\u003c\/li\u003e\n\u003cli\u003ePWM dimming\u003c\/li\u003e\n\u003cli\u003ePUSH-Dim control\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096695992608,"sku":"673154","price":36.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-673154-1.webp?v=1785767571"},{"product_id":"dali-dimmable-led-driver-54w-623154","title":"EASEIC LED Driver 54W Multilevel DALI Dimmable | LND154AC","description":"\u003cp\u003eThe EASEIC LND154AC is a DALI interface LED driver with an adjustable output current from 500mA to 1050mA, giving installers flexibility to match one driver to a range of LED fittings from 31W up to 54W.\u003c\/p\u003e\u003ch2\u003eDali dimmable led driver with selectable current\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current range\u003c\/strong\u003e, 500mA to 1050mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent levels\u003c\/strong\u003e, 11 selectable levels via built-in DIP switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWattage coverage\u003c\/strong\u003e, one driver covers LED lights from 31W to 54W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming interface\u003c\/strong\u003e, DALI, Smart-E dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor\u003c\/strong\u003e, compact, slim shape for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to installers who need to standardise on a single driver across several LED fitting wattages rather than stocking a separate driver per product. The current level is set on site using the DIP switches, so the same LND154AC can be configured for different fittings during installation.\u003c\/p\u003e\u003ch3\u003eSetting the output\u003c\/h3\u003e\u003cp\u003eA label on top of the driver cover shows a chart with the switch positions for each current level, so selecting the correct output for the connected LED light is straightforward.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096703103264,"sku":"623154","price":32.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-623154-1.webp?v=1785767940"},{"product_id":"dali-dimmable-led-driver-36w-633136","title":"LED DALI Dimmable Driver 36W 200-1050mA | Easeic LND136AL","description":"\u003cp\u003eThe Easeic LND136AL is a constant current LED driver with DALI-2 dimming control, built for commercial, architectural and OEM lighting projects. Output power reaches up to 36W, with adjustable output current from 200mA to 1050mA set via integrated DIP switches.\u003c\/p\u003e\u003ch2\u003eDali dimmable led driver control\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming interfaces\u003c\/strong\u003e, DALI-2, 1-10V, PWM, resistance and PUSH-Dim, all supported on the same unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDALI standard\u003c\/strong\u003e, complies with IEC62386, covering ON\/OFF switching, dimming, scene control and feedback communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming range\u003c\/strong\u003e, flicker-free dimming from 0% to 100%, with LED start possible from as low as 0.1%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, adjustable from 200mA to 1050mA via DIP switches to match the connected LED load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 66V DC, up to 36W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100V to 277V AC, for use across residential, commercial and industrial supplies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance and protection\u003c\/h2\u003e\u003cp\u003eEfficiency reaches up to 88%, with a power factor greater than 0.95 and THD below 10%. The driver includes protection against short circuit, over voltage, over current and open circuit conditions.\u003c\/p\u003e\u003ch2\u003eHousing and installation\u003c\/h2\u003e\u003cp\u003eThe slim 280 x 30 x 26mm housing suits recessed luminaires, LED panels, battens and compact architectural fittings where installation space is limited. Push terminals are fitted to simplify wiring and improve reliability.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eSuited to offices, hotels, retail spaces, galleries and other commercial lighting projects that need DALI-2 or analogue dimming control alongside a compact linear driver.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52096710443296,"sku":"633136","price":34.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-633136-1.webp?v=1785768340"},{"product_id":"led-driver-1-10v-54w-adjustable","title":"LED 1-10V Dimmable Driver 54W Adjustable 1050-1750mA | Easeic LNA154BL","description":"\u003cp\u003eThe Easeic LNA154BL is a constant current 1-10v led driver built for commercial, architectural and OEM lighting projects. It delivers up to 54W of output power with an adjustable current range, giving installers control over how hard the connected LEDs are driven.\u003c\/p\u003e\u003ch2\u003eKey features of this 1-10v led driver\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power\u003c\/strong\u003e, up to 54W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current\u003c\/strong\u003e, 1050mA to 1750mA, adjustable via integrated DIP switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage\u003c\/strong\u003e, 3V to 48V DC, maximum open circuit voltage below 58V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage\u003c\/strong\u003e, 100 to 277V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimming\u003c\/strong\u003e, 0\/1-10V, PWM, resistance and PUSH-Dim, with a flicker-free range from 0% to 100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e, up to 88%, power factor greater than 0.95, THD below 10%\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe 3-in-1 dimming support means this driver works with 0\/1-10V control systems as well as PWM and resistance-based dimmers, and it also responds to a standard push-button switch for PUSH-Dim operation. This makes it suitable for offices, retail fit-outs, hospitality lighting, educational buildings and general commercial installations where smooth dimming is required.\u003c\/p\u003e\u003ch3\u003eHigh current output for demanding loads\u003c\/h3\u003e\u003cp\u003eBecause the output current can be set between 1050mA and 1750mA, the driver suits high-power LED modules, panels, battens and architectural luminaires that need more current than a standard fixed-output driver can provide. The universal AC input range also makes it usable across international mains supplies.\u003c\/p\u003e\u003ch3\u003eCompact housing for OEM builds\u003c\/h3\u003e\u003cp\u003eThe slim linear housing measures 280 x 30 x 26mm, letting it fit inside recessed luminaires, downlights, battens and panels where internal space is limited. The driver includes protection against short circuit, over voltage, over current and open circuit conditions, and is rated to operate between -20°C and +50°C.\u003c\/p\u003e","brand":"Easeic","offers":[{"title":"Default Title","offer_id":52097074266400,"sku":"419757","price":36.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/8148\/1504\/files\/ledandsolar-led-driver-1-10v-54w-adjustable-1.webp?v=1785769437"}],"url":"https:\/\/www.ledandsolar.co.uk\/collections\/easeic.oembed","provider":"LED \u0026 Solar","version":"1.0","type":"link"}